Noticed this morning, when I power up holding HOME the phone lockes on the 'HERO' first screen and I can not get into RA...
Anyone got any ideas ?
somebody ? anybody ? this is a disaster, i can not get into my boot menu to install or flash or anything. the phone boots normally if i dont hold the HOME button, but when i power on with the home button held, it locks..... please help me...
Ian_4614 said:
somebody ? anybody ? this is a disaster, i can not get into my boot menu to install or flash or anything. the phone boots normally if i dont hold the HOME button, but when i power on with the home button held, it locks..... please help me...
Click to expand...
Click to collapse
Happened to me too.. no worries..
Re-flash AR through fastboot and it will work again..
adb shell reboot bootloader
adb shell mount /sdcard
adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
adb shell reboot
that's it .. you can rename recovery-RA-hero-v1.6.2.img to something shorter so you don't have to type so much
inertiax3 said:
Happened to me too.. no worries..
Re-flash AR through fastboot and it will work again..
adb shell reboot bootloader
adb shell mount /sdcard
adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
adb shell reboot
that's it .. you can rename recovery-RA-hero-v1.6.2.img to something shorter so you don't have to type so much
Click to expand...
Click to collapse
thanks, but i do not understand, how do i access fastboot ? i am keen to learn but this is new to me...
I'm pretty sure that this is the process, got this from the RA-heroc-v1.6.2.img thread:
adb shell reboot bootloader
fastboot boot recovery-RA-heroc-v1.6.2.img
adb shell mount /sdcard
adb push recovery-RA-heroc-v1.6.2.img /sdcard/recovery-RA-heroc-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-heroc-v1.6.2.img
adb shell reboot
Click to expand...
Click to collapse
muzz3256 said:
I'm pretty sure that this is the process, got this from the RA-heroc-v1.6.2.img thread:
Click to expand...
Click to collapse
Appreciate that,, but i am sorry to say it does not make any sense to me. How to i get into FastBoot,, what do I press etc,, and once I am there,, what do I do ?
Ian_4614 said:
Appreciate that,, but i am sorry to say it does not make any sense to me. How to i get into FastBoot,, what do I press etc,, and once I am there,, what do I do ?
Click to expand...
Click to collapse
I NEVER DONE THIS BEFORE...
back + power button will take you to fastboot...
BUT, I believe "adb shell reboot bootloader" will take you to the right place instead of trying button combinations. So, you can run these commands from normal boot itself.
so when you say, run from normal boot itself, you mean from a file manager etc ?
Ian_4614 said:
so when you say, run from normal boot itself, you mean from a file manager etc ?
Click to expand...
Click to collapse
No!
Do you have adb setup? If not set it up using this link:
http : // theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
Check this link as well: http://forum.xda-developers.com/showthread.php?t=502010
no, you start your phone up normal, go to settings and make sure usb debugging is enabled, then connect your usb-cabel, go to your sdk-directory and type adb shell reboot bootloader, then your phone will reboot into fastboot
Not sure,, this is what I added when I flashed the phone..
boot up the hero, plug in the usb, execute the commands that were given to you on the pc. that is all. you need adb on the pc for that.
right, i dod not know i had to have a programe on the PC,,, I will look for adb and see where I can find it. Is this an app I need to install on the PC ? where do I get it ?
Ian_4614 said:
right, i dod not know i had to have a programe on the PC,,, I will look for adb and see where I can find it. Is this an app I need to install on the PC ? where do I get it ?
Click to expand...
Click to collapse
cracked it, downloaded ROM MANAGER app and this enabled me to flash alternative RA Recovery,, and all now working,
Related
I can't seem to get the custom recover working on my eris. I followed the "adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery-ra-eris.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery-ra-eris.img
4. Close the command prompt and turn off you phone."
to the tee and everything seemed to work.I didnt recieve any error msg on the cmd console but when I boot up holding the Vol+ and power I get and Android under a ! in a triangle and a message that says "E:Can't open /cache/recovery/command then I only get 4 options and none of them are to flash a rom so I always reboot system. I really want to put a rom on here but I have no idea what went wrong. Im sorry if this is a redundant post. I combed a hundred of them and couldnt find anything like this. Thank you for any help in advance.
Oh and before I forget I tried the adb fastboot bootloader version as well. Everytime I do it it sits in the command console stating "waiting for device". Im plugged in so I dont understand what Im doing wrong.
Curious to know... are you using windows or mac? have you tried:
adb shell reboot recovery
to see if that does anything?
Maybe you have a different version of the recovery saved than I do, but mine is named "recovery-RA-eris-v1.6.2.img"...maybe you just had an input error somewhere along the line? forgot a capital letter or something? I had the same error myself and following the directions I got the recovery image back
Im running windows 7 and I have both recovery-RA-eris-v1.6.2.img and the recovery-RA-eris.img. I have been using the v1.6.2 and I just modify the command to look like this "adb push recovery-ra-eris-v1.6.2.img /sdcard" How would I use adb shell reboot recovery would I just sub that in place of something? kinda getting discouraged because I have tried this 10x now. I have checked and the usb debugging is on and I do have the eris 2.1 root and not the leak. I wonder is there any way I can flash this with something from the droid mkt place like SUFBS? Or maybe change a rom's name to look like an update zip?Just looking for ways to make this work Im so jealous of everyone that has got it to work.
here is another question and it might be that this is why its not working with the fastboot option but on this website's walk through thefuzz4.net it states to "You will have FASTBOOT highlighted in red like it is here" Now Im not a pro at this but what does this mean? How do I highlight text in the command shell? I would post the full url but since Im new it wont let me post urls yet.
Dachix said:
here is another question and it might be that this is why its not working with the fastboot option but on this website's walk through thefuzz4.net it states to "You will have FASTBOOT highlighted in red like it is here" Now Im not a pro at this but what does this mean? How do I highlight text in the command shell? I would post the full url but since Im new it wont let me post urls yet.
Click to expand...
Click to collapse
when hes saying fastboot will be highlighted in red he's referring to booting your phone into the standard recovery mode (when power is off) hold volume up and power.
Walking Taco seriously love that name. The only options I get when I hold down vol+ and pwr is 1. reboot system now 2. apply sdcard update 3. Wipe Data/ factory reset 4. Wipe cache partition and all are in purple and at the bottom on the phones screen is "E:Can't open/cache/recovery/command"
The website fuzz4net says to:
WINDOWS USERS
From your tools directory in the sdk do the following command
adb fastboot bootloader
You will have FASTBOOT highlighted in red like it is here
Now on your computer do the following
Fastboot flash recovery recovery-RA-eris-v1.6.2.img
Ok after that completes pull the battery then power back up with Vol Up + Power to enter recovery
But when I get done ...after the last step the cmd.exe window states <waiting for device> any ideas? Thanks for helping too. Leave it to me to hit a snare
almost forgot when it gets to <waiting for device> nothing happens I literally have left and come back 3 hours later and no progress was made
Dachix said:
almost forgot when it gets to <waiting for device> nothing happens I literally have left and come back 3 hours later and no progress was made
Click to expand...
Click to collapse
I honestly don't know man, I would factory wipe it and try and start from the beginning. I followed the fuzz's instructions and was rooted in less than a half hour. Sorry brother.
Thanks!
ROOTED!!!!!! Here is what I did:
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery-ra-eris.v1.6.2.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery-ra-eris.v1.6.2.img
This was not working until I deleted the spaces in between img/sdcard for all the commands. Then and I do not know why but when I would turn odd my phone the vol+ pwr on it would not work so instead I used the adb shell reboot recovery command like droidfreak suggested then BOOYAH the custom recovery was loaded thank you all for helping me.
Dachix said:
ROOTED!!!!!! Here is what I did:
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery-ra-eris.v1.6.2.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery-ra-eris.v1.6.2.img
This was not working until I deleted the spaces in between img/sdcard for all the commands. Then and I do not know why but when I would turn odd my phone the vol+ pwr on it would not work so instead I used the adb shell reboot recovery command like droidfreak suggested then BOOYAH the custom recovery was loaded thank you all for helping me.
Click to expand...
Click to collapse
Awesome news! Have fun with your rooted phone!
I have a chinese Allwinner 7" tablet ( Rocky M713HD ) , I was trying install a CWM recovery image. I connected my tablet to PC, opened my terminal and taped:
adb push recovery.img /data/
adb shell "cat /data/recovery.img > /dev/block/nandg; sync"
adb shell "echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot"
After that, my tablet freezes on bootloader with no single info on adb when typing "adb devices"
As you can see, I missed a caracter on the 3rd line: ( nandg/nandf )
Can anyone give me a solution to flash my tablet? I was on Allwinner 4.2.2 ROM.
Thank you in advance!
Was your bootloader unlocked prior to flashing recovery?
Rudjgaard said:
Was your bootloader unlocked prior to flashing recovery?
Click to expand...
Click to collapse
No
Then that's most likely your problem.
You should restore stock fw and then start from scratch remembering to unlock bootloader this time
(or you can use cwm app from playstore i think it can install recovery on locked bl)
can u go to download mode
ummarrkhan said:
can u go to download mode
Click to expand...
Click to collapse
No, now, it's only showing me the manufacturer's logo. I only have Power and Home buttons, I tried some combinations but nothing happened
elacheche.bedis said:
No, now, it's only showing me the manufacturer's logo. I only have Power and Home buttons, I tried some combinations but nothing happened
Click to expand...
Click to collapse
bring to service center
Hi everyone! Please help me. I've accidentaly typed in Terminal Emulator commad "stop" with SU permissions and my phone first freezed then don't want to boot up. How can i start my phone? I can access only recovery and fastboot.
Edit: Also i can run adb commands. So the question, what command i need to run for start phone?
If you have access to fastboot you could simply use RSD Lite to reflash your phone to stock.
DeathChaos said:
If you have access to fastboot you could simply use RSD Lite to reflash your phone to stock.
Click to expand...
Click to collapse
I don't want to flash stock then again set everything i need. I just need a correct command to run thru adb for start.
It's like "adb start" or "adb shell start", i don't know.
Abstractionist said:
I don't want to flash stock then again set everything i need. I just need a correct command to run thru adb for start.
It's like "adb start" or "adb shell start", i don't know.
Click to expand...
Click to collapse
Honestly, i never heard of the command "stop".
You could check the documentation for adb.
Edit: There is a command called start which "restarts execution of an emulator/device instance."
Abstractionist said:
Hi everyone! Please help me. I've accidentaly typed in Terminal Emulator commad "stop" with SU permissions and my phone first freezed then don't want to boot up. How can i start my phone? I can access only recovery and fastboot.
Edit: Also i can run adb commands. So the question, what command i need to run for start phone?
Click to expand...
Click to collapse
Can also connect that bad boy of yours to comp and run start command in terminal. I have done this too. I also ran bootanimation in android terminal, continous bootloop. But fun is had running those xbin/bin commands. Lol
XT912 RaZR SpYdEr CDMA
hit ThAnKs if I was helpful!!!
I have done this stop command too but my phone still boots up normally it just goes blank and my touch buttons are lit up and all I did was power off by holding power button for 6 seconds and power back on and booted up normally ? I'm alittle scared to play with commands now because I was just typing all random root user commands and I went through a bootloop like 5 times and I reflashed through RSD lite but I know now that I shouldn't play with those cmds now??
Hi guys. I have an HTC OX+... I tried to flash a rom but something went wrong and I erased everything... Now I managed to switch my phone on in fastboot and in recovery mode. How can I sort the problem out?
My recovery is TWRP 2.7.1.0
lorenk93 said:
Hi guys. I have an HTC OX+... I tried to flash a rom but something went wrong and I erased everything... Now I managed to switch my phone on in fastboot and in recovery mode. How can I sort the problem out?
My recovery is TWRP 2.7.1.0
Click to expand...
Click to collapse
I assume your PC has all drivers installed so go to command prompt, there go to your folder where adb and fastboot are.
It should be like this, cd C:\folder_where_adb_is
Now go to recovery mode on the phone and search for Sideload, it can be in install zip from your recovery, click it when you found it.
Go to your Pc and put the ROM to the folder where adb and fastboot are.
Then make sure your phone says it's in adb sideload mode,
On the PC write
Code:
adb sideload file_name.zip
And wait until it's finished
Let's say that's done, but you can't boot, it keeps restarting forever.
In this case, go to your rom.zip open it on the PC and there will be a file called boot.img
Extract boot.img to your folder where fastboot and adb are.
Now on your phone, force it to close by holding power, open fastboot
Again open cmd on the PC and point it to your folder where fastboot and adb are.
Then write
Code:
fastboot flash boot boot.img
oziboy said:
I assume your PC has all drivers installed so go to command prompt, there go to your folder where adb and fastboot are.
It should be like this, cd C:\folder_where_adb_is
Now go to recovery mode on the phone and search for Sideload, it can be in install zip from your recovery, click it when you found it.
Go to your Pc and put the ROM to the folder where adb and fastboot are.
Then make sure your phone says it's in adb sideload mode,
On the PC write
Code:
adb sideload file_name.zip
And wait until it's finished
Let's say that's done, but you can't boot, it keeps restarting forever.
In this case, go to your rom.zip open it on the PC and there will be a file called boot.img
Extract boot.img to your folder where fastboot and adb are.
Now on your phone, force it to close by holding power, open fastboot
Again open cmd on the PC and point it to your folder where fastboot and adb are.
Then write
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
When I write adb sideload file_name.zip, it
returns "error: closed". why?
lorenk93 said:
When I write adb sideload file_name.zip, it
returns "error: closed". why?
Click to expand...
Click to collapse
file_name.zip is your ROM name, for example if you have arhd it can be ARHD_V8.zip or something, just see what name the zip file of your rom has
if this is not the case try
ADB usb before trying adb sideload
oziboy said:
file_name.zip is your ROM name, for example if you have arhd it can be ARHD_V8.zip or something, just see what name the zip file of your rom has
if this is not the case try
ADB usb before trying adb sideload
Click to expand...
Click to collapse
so... I have to write "ADB usb file_name.zip". tath's right?
lorenk93 said:
so... I have to write "ADB usb file_name.zip". tath's right?
Click to expand...
Click to collapse
No, you have to write only "adb usb".
Then try "adb sideload yourrom.zip" again.
if that didn't work, then reboot into recovery and go to command prompt, and write
Code:
adb kill-server
adb usb
adb push yourromname.zip /sdcard
that should work if nothing else works. im having kinda the same issue right now :/
oziboy said:
No, you have to write only "adb usb".
Then try "adb sideload yourrom.zip" again.
if that didn't work, then reboot into recovery and go to command prompt, and write
Code:
adb kill-server
adb usb
adb push yourromname.zip /sdcard
that should work if nothing else works. im having kinda the same issue right now :/
Click to expand...
Click to collapse
I don't know why, but when I write adb usb it returns "error: device not found"
lorenk93 said:
I don't know why, but when I write adb usb it returns "error: device not found"
Click to expand...
Click to collapse
I just fixed this on my phone, now to to control panel - uninstall a program and delete htc sync manager (only sync manager, not the drivers)
Then try again, if nothing, go to here and install that.
If installed, go to fastboot mode, plug in your phone and in that program, when you open it, it says install drivers, flash rom and such...
Now on the right there is flash TWRP recovery, flash that, if your device is an LTE variant (ATT, Telus) install the ones for that and international for international version, make sure you got the correct one.
Then go to recovery, on the lower-right side there is an "advanced" button, hit that and there should be adb sideload somewhere, click that and swipe left to right to enable.
Go to your PC and repeat the sideloading steps as I said before.
oziboy said:
I just fixed this on my phone, now to to control panel - uninstall a program and delete htc sync manager (only sync manager, not the drivers)
Then try again, if nothing, go to here and install that.
If installed, go to fastboot mode, plug in your phone and in that program, when you open it, it says install drivers, flash rom and such...
Now on the right there is flash TWRP recovery, flash that, if your device is an LTE variant (ATT, Telus) install the ones for that and international for international version, make sure you got the correct one.
Then go to recovery, on the lower-right side there is an "advanced" button, hit that and there should be adb sideload somewhere, click that and swipe left to right to enable.
Go to your PC and repeat the sideloading steps as I said before.
Click to expand...
Click to collapse
I did it... Thanks to you... So thank you so much...
lorenk93 said:
I did it... Thanks to you... So thank you so much...
Click to expand...
Click to collapse
No problem, I had almost the same problem and just told what I did xD
Hey guys, I just got LG l9 from my friend but it is (I am afraid, not knowing much about mobiles) bricked.
When I turn it on it says:
-------------------------------------
Secure booting unsuccessful!
Cause:
-------------------------------------
and after that it turns off. If I charge it it turns on and shows battery charging. At combination of Volume+, power button it goes in Recovery mode.
It shows "This mode is for data backup service center. After removing and reattaching battery, press power key to reboot and keep using phone" and from there I can't do anything, just able to take out battery.
If I try combination of Volume-, power button it shows little android and loading bar, after few sec it restarts and shows booting unsuccessful.
I am not sure what he did with it, but pretty sure he rooted it. Is it possible to fix it, hope someone will provide me some help
Thanks !
It is possible to fix, you need to unbrick it. Find the stock rom for your device and find a good tutorial on how to flash em. Good luck!
Thanks for the reply ! I found everything I need, but I got problem - cant enter download mode. On combination of Volume+ and plugging cable I get S/W Upgrade, and on combination Volume+&- and plugging cable I get nothing. Any ideas how to get in that download mode? Thanks!
Infam12 said:
Thanks for the reply ! I found everything I need, but I got problem - cant enter download mode. On combination of Volume+ and plugging cable I get S/W Upgrade, and on combination Volume+&- and plugging cable I get nothing. Any ideas how to get in that download mode? Thanks!
Click to expand...
Click to collapse
www.hardreset.info/devices/lg/lg-p760-optimus-l9/emergency-mode
Try that, then in adb, type adb devices and see if your pops up, if not, try fastboot devices. If it popped up in adb, you can sideload the zip file, if on fastboot, you can flash it.
Try that, then in adb, type adb devices and see if your pops up, if not, try fastboot devices. If it popped up in adb, you can sideload the zip file, if on fastboot, you can flash it.
Click to expand...
Click to collapse
Thanks for your patience and answers! Problem is I cant reach emergency-mode. I always get S/W Update. Under adb devices I can see my phone in recovery mode (was thinking maybe emergency=recovery mode). I tried sideload, it starts loading but after some time I get error:closed. I tried doing adb usb before as well but gave no results.: . Any other ideas? Is there any way to "make" phone run ROM from SD card (in recovery mode can't navigate anywhere like I can on my other phone).
Again thanks for your help and time!
Infam12 said:
Thanks for your patience and answers! Problem is I cant reach emergency-mode. I always get S/W Update. Under adb devices I can see my phone in recovery mode (was thinking maybe emergency=recovery mode). I tried sideload, it starts loading but after some time I get error:closed. I tried doing adb usb before as well but gave no results.: . Any other ideas? Is there any way to "make" phone run ROM from SD card (in recovery mode can't navigate anywhere like I can on my other phone).
Again thanks for your help and time!
Click to expand...
Click to collapse
If it sees your phone as recovery, you can be rescued! Run adb shell and once the shell has popped up, type ls and if you see the phone structure of directories, you can exit the shell and push the file from your pc to your phone. But before you push, I want you to try to run adb reboot-bootloader and see if fastboot recognises it.
RAZERZDAHACKER said:
If it sees your phone as recovery, you can be rescued! Run adb shell and once the shell has popped up, type ls and if you see the phone structure of directories, you can exit the shell and push the file from your pc to your phone. But before you push, I want you to try to run adb reboot-bootloader and see if fastboot recognises it.
Click to expand...
Click to collapse
I think I am making some progress. First on adb reboot-bootloader my phone reboots into secure booting unsuccessful, same as before. On the adb shell/ls I get to see cache, charger, data, default.prop, dev, etc, system, temp and lots of other things. I guess that are directories we are looking for. But when I go adb push filename.zip /data/media I get failed to copy filename.zip: Permission denied. Guess nothing can work at first, sorry
https://forum.xda-developers.com/showthread.php?t=2216896 Have you tried this?
RAZERZDAHACKER said:
https://forum.xda-developers.com/showthread.php?t=2216896 Have you tried this?
Click to expand...
Click to collapse
This gets complicated, I found xloader and uboot, but problem occurs when I try to install fastboot drivers, says third party doesn't contain digital signature information?? I think I was close with shell from adb, just how to get privilege to push files? Tried so many methods.. Thanks again on help.