Hi,
I'd like to know if X10 has that proximity sensor, that, during calls for example, can detect if your face is near of the phone, turning off the screen and saving some battery. I'm my opinion this is very useful.
Yes it does, although the stated usage is to avoid the face interacting with the touch capability. I don't know if it turns the screen off.
at least for my old Motorola Cliq the sensor is able to turn the screen on and off..
I haven't had any problems talking with the phone against my cheek. Read on a swedish forum about someone getting sms during a call and seemingly had answered the sms with his cheek. Needless to say, it was filled with junk^^
deeziel said:
I haven't had any problems talking with the phone against my cheek. Read on a swedish forum about someone getting sms during a call and seemingly had answered the sms with his cheek. Needless to say, it was filled with junk^^
Click to expand...
Click to collapse
Yeah, I read that too! But I have never had any problems like that myself. Works like a charm!
Yes. It has a proximity sensor. It is near the top to the right of the speaker. It will disable the touch and dim the screen (which will also turn off after a time) when it is against your face.
Does anyone know if the sensitivity of the proximity sensor can be tweaked. Mine only blanks the screen when i put my finger within about 1-2 mm of the screen. Now i know i have big ears, but if i position the phone so that it is hard against my face but the proximity sensor is over the centre of my ear the phone comes on. Anyone else get that?
Sent from my X10i using XDA App
zimma said:
Does anyone know if the sensitivity of the proximity sensor can be tweaked. Mine only blanks the screen when i put my finger within about 1-2 mm of the screen. Now i know i have big ears, but if i position the phone so that it is hard against my face but the proximity sensor is over the centre of my ear the phone comes on. Anyone else get that?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
yes it can through build.prop you can chane how quick it turn on
I needed to change that for my wife, she kept hanging up when the oboe was against her cheek lol
I have no issues.
Sent from my X10i
does the proximity sensor also works in pants or shirt??
for example: i pick up a call using bluetooth and the phone is in my pants, it seems that the phone screen n touch screen is on... if i move my body and accidentaly touch the "end call" button i suddenly hang up... this also happen if i accidentaly hit the speaker key on the screen... i know donut 1.6 doesnt have this problem, but after update to eclair 2.1 the screen doesnt shut if i pick up a call using a bluetooth...
Related
Hi everyone,
funny thing happened to my Mozart. Whenever I make a call the screen shuts off like it should, but it doesn't turn on again when i remove it from my ear until the call has ended.
Which works fine if the other person hangs up, but it means I can't hang up. Whenever I reach a voicemail i have to take out the battery to hang up!
First i thought it was a rom issue, i had just gotten my hands on the mango beta when i first noticed it. I thought it might be buggy.
But the problem remains after hard reset and flashing with a different rom (pre-nodo & nodo).
I found out that the sensor still works. The screen is reactivated when i shine a bright light (halogen spot or so) onto it - but only for as long as the source shines onto the sensor, else the screen shuts off again. wierdly enough, direct sunlight doesnt seem to be enough to trigger it anymore.
since i upgraded my phone with a 32GB microSD I guess I'm not eligible for warranty, huh? but im pretty sure it happen long after and i didn't accidently break something while opening the phone.
very weird... any ideas?
I had this problem on the weekend.
I removed the matt screenGUARD, and the problem disapeared.
Also you can reactivate the screen by pressing the on/off button...
thanks for your comments.
unfortunately, I don't use a screen protector and the standby-button doesn't work during a call
I have this problem also, with stock 7392 rom. The sensor seems to work when dialing, but stops a short time after a call is connected.
The power button works for me to turn the screen back on however...
Where is the proximity sensor ?
where on the device is the proximity sensor located?
I have been having difficulty with the screen not switching on during phonecalls and I have to remove battery to end outgoing calls. Pressing the power button doesn't help either. I don't have a screenguard to remove.
The problem started not long after, but not immediately after my daughter dropped the phone down the toilet. It took a few days for the phone to gently dry out and it worked again except for some residual water between the screen and the glass.
Richard Fantom said:
where on the device is the proximity sensor located?
Click to expand...
Click to collapse
The sensor is about 1 cm to the top and right of the htc logo. It's barely visible and it is dark violet. (Or something like that, I am not very good at naming colours.)
Anyway, I sometimes also experience problems with sensitivity with HTC Mozart, mostly during calls, especially when the proximity sensor has been activated. Sometimes the home button freezes after a call... It's a bit annoying.
I apologize ahead of time if this has already been posted but I have looked high and low for a solution to this:
During a call, sometimes I move the phone slightly away from the phone occasionally and sometimes it is just far enough to turn the screen back on. I don't really like that end call is simply a button. I was wondering if anyone knows of a swipe or slide to end call function that way just touching the screen won't end/hold a call without a deliberate gesture. I read a lot of other forums and most people say "is your proximity sensor working properly." Short answer: yes because the screen still turns off if the proximity sensor is triggered but sometimes it doesn't. By the way I am running CM7 RC1.4 on my Thunderbolt. I feel like when I still had sense, there was some sort of swipe to end call but I might be imagining things. Any help is appreciated.
mkitchen said:
I apologize ahead of time if this has already been posted but I have looked high and low for a solution to this:
During a call, sometimes I move the phone slightly away from the phone occasionally and sometimes it is just far enough to turn the screen back on. I don't really like that end call is simply a button. I was wondering if anyone knows of a swipe or slide to end call function that way just touching the screen won't end/hold a call without a deliberate gesture. I read a lot of other forums and most people say "is your proximity sensor working properly." Short answer: yes because the screen still turns off if the proximity sensor is triggered but sometimes it doesn't. By the way I am running CM7 RC1.4 on my Thunderbolt. I feel like when I still had sense, there was some sort of swipe to end call but I might be imagining things. Any help is appreciated.
Click to expand...
Click to collapse
You haven't looked high and low.
If you had, you'd know that a simple can of air would fix your problem. Blow the air into the left side of your earpiece.
Sent from my Synergized Thunderbolt via XDA Premium App
And yet again someone assumes the sensor isn't working... I was looking for a swipe to end call feature. Not a solution to a misbehaving sensor.
Sent from my ThunderBolt using XDA App
Well I know you don't like to be told how to fix your problem.
But if you fix the sensor, your problem would be fixed.
Duh.
Sent from my Synergized Thunderbolt via XDA Premium App
wow. Well if anybody else feels like actually being helpful feel free to do so. I feel like I'm on after dawn's forums again.
Hi I have just got a HTC radar as a company phone and am getting some odd behavior when dialling
Sometimes it works like expected other times when I press call the screen goes off and will not come back on no matter what I do until the other end pick the call up
Now that's not so bad until you call voicemail when nothing makes screen come on ie tried moving away from anything (in case proximity sensor turning it off ) tried the on/off button volume even camera button nothing works so I can't press option 1/2 etc
Only way I can end the call is to remove bottom cap and take sim card out
This happens on around 50% of all calls and is really bugging me , if its connected to a bluetooth car kit ,the car kit can end it ok
Everytime on bt kit the screen goes off with pressing call
Anyone else having this problem?
Sent from my HTC Sensation Z710e using Tapatalk
Nope, mine works perfect. Sad to hear tho...
Had that problem with my dell venue pro. Its a fix for it that I found under the dell venue pro forums of xda. Not sure if u can get the same access for the htc
Sent from my Venue Pro using XDA Windows Phone 7 App
fireblade893 said:
Hi I have just got a HTC radar as a company phone and am getting some odd behavior when dialling
Sometimes it works like expected other times when I press call the screen goes off and will not come back on no matter what I do until the other end pick the call up
Now that's not so bad until you call voicemail when nothing makes screen come on ie tried moving away from anything (in case proximity sensor turning it off ) tried the on/off button volume even camera button nothing works so I can't press option 1/2 etc
Only way I can end the call is to remove bottom cap and take sim card out
This happens on around 50% of all calls and is really bugging me , if its connected to a bluetooth car kit ,the car kit can end it ok
Everytime on bt kit the screen goes off with pressing call
Anyone else having this problem?
Sent from my HTC Sensation Z710e using Tapatalk
Click to expand...
Click to collapse
Do you have a screen protector? If so it could be one of poor quality and is interfering with your screen. Remove it if you got it. Also it can mess up your ambient light sensor/proximity sensor.
MJCS said:
Do you have a screen protector? If so it could be one of poor quality and is interfering with your screen. Remove it if you got it. Also it can mess up your ambient light sensor/proximity sensor.
Click to expand...
Click to collapse
Nope I have nothing on the screen its as it came
Have reset device still the same I'm guessing it has a problem , sad to say but HTC aren't impressing me lately even thinking of replacing my sensation with a galaxy nexus soon :-(
Sent from my HTC Sensation Z710e using Tapatalk
I'm having the same issue too. But i do have it all the time, with every single call i make.
Lets test something here:
Grab a flashlight and turn it on
Cover the light sensor in the upper left with your finger and make sure the 3 capacitive buttons light up.
Uncover them
Now shine the flash light directly into the light sensor
Did the lights turn off? If not get your phone replaced. If they did then you or something is covering the light sensor. The light sensor can turn the screen off at around 1".
I wrote to HTC, they replied after 1-2 hours:
"this is a functional problem caused by a sensor inside the phone" ... "if you can please do get a replacement phone if you have just bought the phone"
Click to expand...
Click to collapse
I asked my local dealer, i will receive a new device tomorrow.
MJCS said:
Lets test something here:
Grab a flashlight and turn it on
Cover the light sensor in the upper left with your finger and make sure the 3 capacitive buttons light up.
Uncover them
Now shine the flash light directly into the light sensor
Did the lights turn off? If not get your phone replaced. If they did then you or something is covering the light sensor. The light sensor can turn the screen off at around 1".
Click to expand...
Click to collapse
Tried this but nothing happens while call is active , I rang someone today got their voicemail I left a message but after my message I couldn't end the call I had to connect it to my car kit and use that to end the call
Time for a new handset here as well I think :-(
Sent from my HTC Sensation Z710e using Tapatalk
What was the outcome. Did the lights turn off?
MJCS said:
What was the outcome. Did the lights turn off?
Click to expand...
Click to collapse
For me, the light turned off. In fact I do not need to shine a torchlight. If I cover the top part of the display the 3 capacitive buttons light up. If I uncover, the light disappear. Any ideas? The screen is turning off every time I make a call.
That tests the ambient light sensor(s) - most phones have 2 or 3 - but it doesn't test the proximity sensor... (because the button lights should be tied to the ambient).
Either way, I have not heard of this issue, though HTC has pushed out a firmware update over zune for the Titan recently. I'd recommend to check that, and if there is no update/doesn't fix, then replace the phone.
Sent from my MB860 using Tapatalk
jeremyshaw said:
That tests the ambient light sensor(s) - most phones have 2 or 3 - but it doesn't test the proximity sensor... (because the button lights should be tied to the ambient).
Either way, I have not heard of this issue, though HTC has pushed out a firmware update over zune for the Titan recently. I'd recommend to check that, and if there is no update/doesn't fix, then replace the phone.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
The light sensor IS the proximity sensor
MJCS said:
The light sensor IS the proximity sensor
Click to expand...
Click to collapse
Is my sensor working properly then? I have a screen protector installed. Is that the problem? I have not tried taking off the protector yet.
You should try that. Some cheap screen protectors can mess with it. I know this was the case with some protectors on the dell venue pro early on.
MJCS said:
The light sensor IS the proximity sensor
Click to expand...
Click to collapse
o.0!? The proximity sensor is normally a led rangefinder in the infrared frequencies. Light sensor could cause lots of false positives...
Sent from my SGH-i937 using Board Express
Fixed the problem. You must remove the clear stock screen protector...it distorts the sensor.
I've been saying that all along
I did a test. Peeled off a bit of the screen protector, enough to expose the sensor. Made a call. The screen didn't blank. So it's the screen protector.
Hi guys I have just recently bought a Radar from bay and im having the same problem, but this time there is no screen protector.
If I cant get a refund form the seller, can I get a warranty repair seeing as though im a second owner?
Cheers
I think I have a small problem.
When someone calls, the caller ID is displayed on screen. But at this time, the proximity sensor does not work. Only after I have accepted the call is the proximity sensor activated.
Due to the proximity sensor being disabled, while taking the phone out from my trouser pockets, lots of times I mistakenly touch the screen and the call is rejected even before I can get the phone out. And sometimes the call gets rejected by its own due to the clothing touching the screen(though this should not happen actually. But I have seen this happen with my phone)
So I am trying to find out if it is a problem with the custom ROM I am using or is it the standard feature of P500?
I am using OpenOptimus 1.172
of course when the caller ID shown proximity sensor won't come into place, or not how are you gonna accept/reject a call!?
Anyway this thing happens in all android phones with the proximity sensor
terratrix said:
of course when the caller ID shown proximity sensor won't come into place, or not how are you gonna accept/reject a call!?
Anyway this thing happens in all android phones with the proximity sensor
Click to expand...
Click to collapse
When my phone is in my pocket, what is the use of turning on the screen? Until I get it out of my pocket, I wont be able to see the screen anyway.
And when I take my phone out of my pocket, the proximity sensor won't be blocked anyway(it will be in free air) so it will turn on the screen anyway then.
Because of this useless thing, I have missed many a call
I noted each time I make a call, the display immediately turned black. It auto turn black without me even taking up the hone up to my ears. I needed to press the power switch to have the display lit up again. Is this a proximity sensor defect ??
Same issue
mobile88 said:
I noted each time I make a call, the display immediately turned black. It auto turn black without me even taking up the hone up to my ears. I needed to press the power switch to have the display lit up again. Is this a proximity sensor defect ??
Click to expand...
Click to collapse
Yea I'm dealing with the same issue on my at&t model, it's definitely a proximity sensor issue. Also, I find that the proximity sensor functions relatively OK outside of the phone app when I'm on a call in terms of lighting of fading to black...I haven't found a fix yet, hopefully it's a software issue though somethings telling my it's not... Just another defect in a long line of LG phones as of late
Applez2androidz said:
Yea I'm dealing with the same issue on my at&t model, it's definitely a proximity sensor issue. Also, I find that the proximity sensor functions relatively OK outside of the phone app when I'm on a call in terms of lighting of fading to black...I haven't found a fix yet, hopefully it's a software issue though somethings telling my it's not... Just another defect in a long line of LG phones as of late
Click to expand...
Click to collapse
I have a same issue but clean the proximity sensor and it will work. The proximity sensor is next to the speaker. Clean with your t-shirt or jeans.
thebiker said:
I have a same issue but clean the proximity sensor and it will work. The proximity sensor is next to the speaker. Clean with your t-shirt or jeans.
Click to expand...
Click to collapse
I've cleaned it several times to no avail
I have noticed occasional "quirkiness" while in the phone app, but not to the point of requiring a battery pull. Example, connected via Bluetooth, while plugged to a charger in a call, no way to wake the phone without pulling the charger.
Sent from my VS990 using Tapatalk
thebiker said:
I have a same issue but clean the proximity sensor and it will work. The proximity sensor is next to the speaker. Clean with your t-shirt or jeans.
Click to expand...
Click to collapse
Thank you. Thank you. Your proposed solution works very well. Now no more this problem. Had never thought the sensor could be dirty or blocked over time. I had the phone only about 2 months
Problem update
Okay, I've found new info on the proximity sensor problem. Firstly, I noticed that my proximity sensor still works with the second screen, if I cover it up when my screen is off it goes black and comes back on when I remove my finger. Secondly, if I was on the phone but not actually in the phone app it would behave normally sometimes. Now today I found out that when I'm in the phone app, if I'm talking on the phone through the speaker the screen does not go black, as soon as I take it off speaker, the screen goes immediately blank. Still have not found a fix, but just more info that may help define what the actual problem is.
anyone have any update on this? this issue seems to be getting worse for me
Same issue, drives me nuts. This phone is a disappointment to me overall. Have an S7 on pre-order with Verizon. Can't wait to get my hands on it!
Had same issue just happen on the AT&T LG Escape 2. (Yes I know its a year since this thread was started)
It was the proximity sensor but the "T-shirt wipe" method didn't work for me.
What I did realize there was some gunk on the sensor, and I used a cotton swab (Q-tip) with alcohol and rubbed it till it was visibly clear of gunk. Now it works fine again..
odesskiy said:
Same issue, drives me nuts. This phone is a disappointment to me overall. Have an S7 on pre-order with Verizon. Can't wait to get my hands on it!
Click to expand...
Click to collapse
Turn of Gestures
Was facing the same issue
Went into settings
Call
Turn of both gestures auto answer and flip to silence