my problem is :
The device's screen is now white and "usb upgrade mode" is written
usb devices connected notebooka den with windows 7
In the lower right corner of windows smart phone as a usb device was recognized Symbol
have provided a link to download the file off the table and on
başlağımda unable to establish contact with the phone gives an error
In the meantime, the Windows Mobile Device Center to open in the background but can not connect with it
short windows of usb smart phone contact with the program but not recognized as
Hello, if I am not mistaken you have a T4242+ version.....please check this thread..... http://forum.xda-developers.com/showthread.php?t=607709 and this one http://forum.xda-developers.com/showthread.php?t=571936
Related
I just recieved my Xperia S phone
When i connected my phone, it asked me to install pc companion , i did it .
Now when i connect the phone it says USB device cannot be recognised and even the PC companion is not detecting the phone!
Help me please
Same is the problem with me, Its installed on one computer and working properly but not on the 2nd one.
How to do it? Please help
Unplug the data cable, reboot both the phone and the PC and see if it works. I had a similar issue yesterday and a reboot solved it.
And if you have already installed the device (Xperia S) then in Windows 7 go to Control Panel- Devices and Printers and check if Xperia S is listed there. If yes open it and change general settings - Open Windows Explorer to view files when device is connected.
I am having trouble with installing drivers for
1. PCI Simple Communications Controller
2. SM Bus Controller
3. SEMC HSUSB Device
Can anybody tell me where can i find drivers for these?
I have same problem, when i connected usb on to my phone its charging. There is no option asking MTP or MSC,,, please help to fix this problem guys
When i connect my SGS2 to my computer a little message pops up in the notification bar saying :
"the last device you connected to this computer malfunctioned" and when i go into Device manager i have a little yellow triangle next to an usb sayig "Unknown usb deivce" ,i've attached an image/screenshot that tells a better story.
Also when i connect the phone nothing happens on the phone (no icons, nothing).Just get that beep from the Windows.
I have tried :
- reinstalling the samsung drivers for the windows (event tried with Kies)
- tried mounting it from Recovery
- trying installing/reinstalling those windos usb drivers for that usb
nothing helps...any1 ?
Phone :
Custom rom , kitkat with TWRP recovery 2.7
PC :
Windows 8.1 64bit.
~ i have never had this problem before, i havent connected my phone to my pc in a long time so i dont know what could have caused this
I am using Windows 7 64 Bit..
I have followed the correct procedure for installing the USB vcom mtek drivers and still I get this error.. It says : This device cannot start. (Code 10)
I have tried restarting the computer with the phone turned on and off, I've also tried changing the USB connection settings on the phone to"media device (MTP).. Also tried the "USB Storage" option.
No joy.. Any clues as to how to install this drive without the code 10 error????
I want to flash my phone but I can't because the Smart Phone Flash Tool cannot connect to my device in the way it want's to.
I can navigate the files of my phone via the PC though..
When I changed my USB connection settings type to 'Media Device (MTP) I could see 'Leagoo Lead_5' in my Portable Devices section of my Device Manager on my PC..
Does anybody use these forums?
What make and model of phone is it?
with the make and model we can help more by finding better drivers
but another thing to try right now, is try plug it into a different USB port(one at the back thats part of the motherboard rather than a expansion front style port)
Hi, I have a problem that my PC doesn't recognize my POCO F1 in FASTBOOT mode.
I'm running Win 10 64bit (Core i7-3517U), my phone is Global stable 11.6.0. bootloader is NOT unlocked and there is no root.
The main problem: When I try to connect my phone in FASTBOOT mode to my PC and go to System Manager it shows an exclamation mark, not a question mark like it would if you just didn't have the drivers. It also says "The device has been stopped (Code 43) (the other error codes are in the attachments given below) A request for the USB device descriptor failed." I guess this means it's not a simple matter of missing drivers, even if my phone is connected normally, it does not show up or connect to the Mi PC Suite. Normally, if you plug in a new device without drivers, Windows at least recognizes whether it's a printer, headset, mouse or whatever and starts looking for appropriate drivers, but not here.*Whenever I put my phone on FASTBOOT mode, it never gets recognised it just shows an exclamation with a dialogue box that says that "The last USB device you connected to the computer malfunctioned, and Windows does not recognise it" (screenshots provided in the attachments below with normal my phone on normal mode and fastboot mode please go through them)
What I have already tried based on my previous research, but with no success:
different computers, windows and Mac
different usb cords
usb debugging on/off
all usb modes (MTP, file transfer etc.)
usb 2.0 and 3.0 ports
re-installing Mi PC suite
resetting my phone
resetting my Windows 10 pc
and none of the above seem to work.
I also spoke with a friend and tried connecting their phone (Redmi Note 5 Pro) on fastboot mode to my Windows Pc and the Mac and it works!
but my POCO F1 does NOT get recognised.
I live in Pune, Maharashtra in India
and there's a huge lockdown, like there is, all over the world
I can't actually go out and visit a service center and fix this anytime now. i need some serious urgent help on this, I'm willing to do anything to fix this at home. I just need assistance and i need some sort of external guidance. Please, please help me with this matter.
Phone Number : +91 8668606192/ +91 966554769
E-Mail ID : [email protected]
I've provided screenshots of everything and my contact details please read my message and help me with this matter. The feedback form only allows me to attach a maximum of 3 photos so I have sent in a few more feedback form with the same message PLEASE understand my situation and help me accordingly. Consider this a feedback form thread this being
Thank You,
Rahul Singh
Try connecting to a Windows 7 PC instead of Windows 10, and install the drivers
Sarojkr said:
Try connecting to a Windows 7 PC instead of Windows 10, and install the drivers
Click to expand...
Click to collapse
I'm in pune its on high alert I can't reach to my friends or to servicing center.
I tried to connect to mac but same thing happened only adb mode is working FASTBOOT mode not detecting by pc
rahulsinggh said:
I'm in pune its on high alert I can't reach to my friends or to servicing center.
I tried to connect to mac but same thing happened only adb mode is working FASTBOOT mode not detecting by pc
Click to expand...
Click to collapse
If you still not able to find a way pls follow this video. Thanks
Was it ever resolved ? I had similar issue with my POCO F1. it was working fine in ADB but not getting detected in FASTBOOT. Every time I connected it in fastboot it showed a message USB device not recognized. drivers and all were fine. Code 43 was also there in device manager.
I was able to fix it by using Bugjaeger Premium on my spare Samsung rooted android 10 phone with OTG since my spare phone has micro USB.
POCO F1 was also not getting detected first then I did a factory reset, and MIUI recovery wipe and simply disconnected the cable and rebooted poco f1 using volume down and power button and voila it got detected in my samsung phone then i flashed TWRP.
dear all, this is my first time here, i am having issue with my legion phone 2 dual, the left usb is able to charge but unable to connect to laptop, it show usb malfunction and as per screenshot, even when i am not charging nor connected, it will still keep prompting charging.
i try to use the bottom usb c to update firmware but fail.
any advise?
Change Default USB Mode in developer options to something other than No Data Transfer. You may be missing Qualcomm HSUSB and Android adb/fastboot drivers if you are using Windows.