Has anyone found or/and is using a decent car mount?
I'm looking for one that is powered (with micro USB) with maybe a fm transmitter and bluetooth.
Thanks.
Halfords phone holder
Incar charger from T-Mobile
if anyone is using a charger for their car, i'm wondering how fast it is to charge a battery with it?
is it like when charging through your PC (slow) or just like it's standard charging?
Check brodit.com, they have/will have soon, a good holder/charger for the phone
/MKL
I make use of a Parrot MKi9100 Solution via BT.
Charging happens by a cut + angled Micro-USB Cable that is soldered to the +12V ignition Bus (with some resistors, a fuse and so on), which comes out of the front window air ventilation from my dashboard.
The Phone itself is also used as GPS Navigation System and rests in a holder, like you know it from 3rd Party PNAs (I don't know the English Word for such a holder atm.. sorry.)
I've just purchased the Brodit Fixed install Active Cradle and the car specific ProClip mounting bracket from http://www.dsldevelopments.com/
for $96 AUD inc P&H
I figured this would be a good future proof solution as if I upgrade my phone then I just need to get the right cradle and it will fit straight to the ProClip.
When it arrives I'll take photos of the install.
Yeah, I'm looking for a good landscape car mount for my X10 (has to be adjustable as I have a thin rubber case on the phone), as well as car charger and hands-free speakersphone for Christmas.
saltorio said:
Yeah, I'm looking for a good landscape car mount for my X10 (has to be adjustable as I have a thin rubber case on the phone), as well as car charger and hands-free speakersphone for Christmas.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=8020010#post8020010
also Canadian Tire has a charger from duracell that looks like it will fit the bill for many different phones multi ends and all.
I couldnt find any proper hands free car kits for the Xperia. I'm happy to use a Blueant X9i got 3x $100 off ebay.co.hk!
I got one of these:
http://universalfuze.com/parrot_minikit.html
I think it is great!!!
I only use brodit, for the last 5 phones...
Got my Brodit kit yesterday, installed it in 10 minutes.
Forgot to take photos but can easily do it again.
The mounting face clips onto my dash near the stereo quite securely then the swivel mount just screws to that. I drilled some small pilot holes in the mounting face to make it easier and neater to screw the swivel mount into place, then just attach the phone mount to that. Plug into cigarette lighter, done.
In the not to distant future I'm going to install a secondary cigarette light socket hidden behind the dash. Its pretty easy to just hook into the existing cigarette lighter wiring, this will give the car kit the look of a permanently installed device, but actually make it pretty easy to remove. And free up the cigarette lighter for other chargers (iphone, usb adaptor for Blueant charger, etc)
So, I ended up picking up a iGrip Traveler Kit at The Source for $30. The suction cup holds pretty well on my Magellan GPS mounting plate (though has fallen off once or twice after the car gets well warmed up from the winter cold... I rigged a string to my windshield vent to prevent it from falling), and the actual holder grips the X10 superbly, even in the rubber shell case I have. You can very easily pivot it and rotate it from portrait to landscape.
For the charger, I'm using the one that came with my Jabra Cruiser.
skydirt said:
Has anyone found or/and is using a decent car mount?
Click to expand...
Click to collapse
I was using this cup holder mount that has a short gooseneck (Bracketron Universal Cup-iT with Grip-iT), and that was working fine for me. However, the position of the phone wasn't the best since I had to look down and toward my side to view it.
I just got this mount that goes into the CD slot of my car stereo, and this one is pretty nice. It's the Mountek MT5000. The mount blades slide right into the front of the CD slot, and then you just twist this little nut in the back a bit to tighten the blade grip. My X10 fits nice and snug, and now it's in a better viewing position.
If I need power, I just use one of those inexpensive USB chargers from eBay. A ten-minute job of opening one of those up, soldering together the data pins, and it works good for the phone.
saltorio said:
So, I ended up picking up a iGrip Traveler Kit at The Source for $30. The suction cup holds pretty well on my Magellan GPS mounting plate (though has fallen off once or twice after the car gets well warmed up from the winter cold... I rigged a string to my windshield vent to prevent it from falling), and the actual holder grips the X10 superbly, even in the rubber shell case I have. You can very easily pivot it and rotate it from portrait to landscape.
For the charger, I'm using the one that came with my Jabra Cruiser.
Click to expand...
Click to collapse
xdadevelopers1222 said:
I was using this cup holder mount that has a short gooseneck (Bracketron Universal Cup-iT with Grip-iT), and that was working fine for me. However, the position of the phone wasn't the best since I had to look down and toward my side to view it.
I just got this mount that goes into the CD slot of my car stereo, and this one is pretty nice. It's the Mountek MT5000. The mount blades slide right into the front of the CD slot, and then you just twist this little nut in the back a bit to tighten the blade grip. My X10 fits nice and snug, and now it's in a better viewing position.
If I need power, I just use one of those inexpensive USB chargers from eBay. A ten-minute job of opening one of those up, soldering together the data pins, and it works good for the phone.
Click to expand...
Click to collapse
Sorry but all these ideas sound pretty crap. I totally agree with vmiguel and will only buy Brodit from now on.
i have been using the ebay x10 windshield mount. for $12 it's doing a pretty good job compared to the other ebay mounts for my other phones. i'm not a fan of universal window mount kits..
not a big fan of universal kits either.
i attached (sorry, couldn't find one without a watermark, but i won't link to their ebay auction) a picture of a kit that's sold on ebay, does anyone have experience with this one? the one pictures is meant to attach to an air vent but there's also one with a suction cup. it looks like it has a good fit with the x10.
I'm going to need something like your kits.
Need more options, please!
caifanX10 said:
Need more options, please!
Click to expand...
Click to collapse
I've been through a bunch of car mounting solutions already. They include:
Cup mount: www.bracketron.com/products/universal-cup-it-with-grip-it
Cigarette power mount: www.bracketron.com/products/universal-usb-power-dock
Air vent: www.bracketron.com/products/mobile-grip-it-universal-holder
CD slot: www.mountek.com
My favorite is the Mountek CD slot mount. Its quite inventive.
The air vent one from Bracketron is good too. Its spring clips hold everything nice and firmly.
The cup mount was good too, but it doesn't offer a good viewing angle and reach for the phone.
totalundone said:
not a big fan of universal kits either.
i attached (sorry, couldn't find one without a watermark, but i won't link to their ebay auction) a picture of a kit that's sold on ebay, does anyone have experience with this one? the one pictures is meant to attach to an air vent but there's also one with a suction cup. it looks like it has a good fit with the x10.
Click to expand...
Click to collapse
I use this one, and love it. The drawback is you have to remove any case before putting it in the mount. I got the hang of one handed removal, but it was a bit difficult at first. Easy to rotate to landscape. Camera hole in back for using any apps that layer gps info over real time camera view. Vent mount won't work with circular/spherical type vents in some cars. You'll know what I mean if you have one of those cars.
Sent from my X10a using XDA App
Related
Anyone found a decent car mount for the wizard
I need one for satnav. I've seen one for about £45 that has a built in speaker etc - don't really need that
Would be interesting to hear (and see pics) of what people are using
Hi Hays,
Have you considered the Brodit holder solution?
Have a look (link below) or drop me a message and I will be happy to advise (Wizard listed either as Xda Minis or MDA vario)
you have the choice of passive holders, active holders charged by cig lighter or permanent fixed power version also for hidden cables etc. All attach onto a proclip mount that is specific to your vehicle, in a variety of positions on your dashboard.
Hope that helps,
Cheers, Bryson
That kit looks very good quality - seems quite expensive though !!
I use different cars at work, so I need something that can be moved easily. Could I use the holder with a different mount, ie perhaps a vent mount (that's not too hard to move from car to car) or failing that a suction mount (not too keen on a suction mount due to the smaller display of the mini s )
Was thinking of this
http://www.gpsforless.co.uk/product_details.php?id=3482
with this
http://www.gpsforless.co.uk/product_details.php?id=3464
That kit looks very good quality - seems quite expensive though !!
I use different cars at work, so I need something that can be moved easily. Could I use the holder with a different mount, ie perhaps a vent mount (that's not too hard to move from car to car) or failing that a suction mount (not too keen on a suction mount due to the smaller display of the mini s )
Was thinking of this
http://www.gpsforless.co.uk/product_details.php?id=3482
with this
http://www.gpsforless.co.uk/product_details.php?id=3464
bryson said:
You have the choice of passive holders, active holders charged by cig lighter or permanent fixed power version also for hidden cables etc. All attach onto a proclip mount that is specific to your vehicle, in a variety of positions on your dashboard.
Click to expand...
Click to collapse
Bryson, I'm after a active holder with no cable attached, so that I can add a "Y"-type lighter plug cable that will charge both my Qtek 9100 and my Bluetooth GPS mouse. (I had a similar one for my h6340, and want to stay with Brodit.)
Is Brodit developing such a holder design soon?
Hi,
Yeah there are 2 available from Brodit, codes 848650 & 848655 (Called passives so you can insert your cable as mentioned)
Check this link and scroll down past the Xda Exec holders to the Mda Vario/Xda Mini S/ Qtek 9100 holders
http://www.dsldevelopments.com/tmobile/tmobile.html
Hope that helps, take care, Thanks!
Hello,
I got mine shiped from the US to Germany within 2 weeks from www.thepocketsolution.com which have a fast feedback and good customer support in general. The mount device works perfectly well as expected.
Thomas
I got the brodit clip and horizontal holder for my XDA Mini S from dsldevelopments, and am very happy with both the clip and the service!
I tried one of those cheap ebay mounts that clips onto the airvent but thay was useless and moved all over the place. The brodit clip goes over my S60's vent perfectly and is very solid.
The only thing I would suggest is instead of using the supplied screws to attach the holder to the mount - use velcro. I did this on mine so that I can quickly remove the holder and put it in the glove box. Good for security as passers by cant see I have a satnav mount and wont try breaking in to see if its in the glovebox!
Hi,
Instead of velcro, Brodit make a 'Moveclip', one part fits on the back of the holder, the female (2 supplied for x2 proclips) part fits onto the proclip, and both parts slide together, giving an very strong fix, and also the flexibilty of being able to move a holder between 2 vehicles with proclips/gooseneck installed. (also serves the same purpose of being able to remove the holder from sight to stop the thieves!)
Hope that helps, heres a link:
http://www.dsldevelopments.com/hotpages/march06/minimoveclips.html
Cheers,
Bryson!
instead of a car mount I did something different. I just bought myself a nice case for the mda vario (e.g. noreve, piel frama). These cases are made of leather, and therefore they have good grip.
I just lay the case on the kilometer radial in front of me, and it stays there. Even in sharp corners.
The advantages are: cheap as you don't need a car mount and thief protection as there is no car mount visible.
I love using my hd to watch movies hooked up to aux input in my car,
I got one of these of ebay:
http://cgi.ebay.co.uk/NEW-CAR-CHARG....c0.m14&_trkparms=65:1|66:2|39:1|293:1|294:50
its already snapped!
I want something that allows you switch between horizontal/vertical and tilt funtion for tomtom and core player
I may try velcro stickers or maybe an air vent holder
any other ideas?
I have had 2 of these..they are absolutely rubbish, the insertion clip snapped both times. I have also tried another holder (universal one) and that turned out to rubbish too, I threw it away. Another time the suction disc came away from the arm. I have also tried my own custom made holder - I took a leather phone case and screwed it into the back of the arm attachment, that worked much better than the worthless gadgets of ebay. So save your money and forget buying from ebay, it maybe worth spending a bit more for a better quality item. And just yesterday I found my my xda orbit holder provided by O2 so using that for now which fits the Touch HD very well.
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
I had a universal jobby off ebay, that was a bit rubbish since where it clamped onto the phone it obscured the volume control buttons.
Ordered one of the HD specific designed ones and will see how that goes.
KaNiMziE said:
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
Click to expand...
Click to collapse
I've had two of these and on each occasion the clip broke, it's useless!
If anyone is still searching
I've got a magnetarm for my HD combined with a metalpad. Works fine and you can rotate your pda in any order.
http://www.amazon.de/MAGNET-HALTERUNG-T-Mobile-Compact-Autohalterung/dp/B000RXZUPA
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
laguna33p said:
I've had two of these and on each occasion the clip broke, it's useless!
Click to expand...
Click to collapse
I have it for 3 weeks now and no trouble at all, very fast delivery and safe, only 2 weeks at my door....
KaNiMziE
http://forum.xda-developers.com/showthread.php?t=533649
Brodit holder + charger
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Pro Clip makes some amazing solutions. I have used them for years on numerous devices.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Goes pretty fast. Haven't done any comparison, but I can't complain. I normally drive 45 minutes to work and twice a day charging is fine for me.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
got one as well it pricey but well worth it
mrobo said:
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
Click to expand...
Click to collapse
I like the look of the solid mount to the screen, but the holder looks a bit busy.
How have you found it?
Paul.
I got my own here www.mobilefun.co.uk
In this page you can find just about everything you need for your touch hd or any other phone... Bad thing deliveries are done only within the EU countries
The link for the holder i personally purchased and i'm 100% satisfied is here:
http://www.mobilefun.co.uk/htc-touch-hd-car-holder-p19992.htm
If you are looking for something a lot cheaper that goes with a car charger in the pack you can look here:
http://www.mobilefun.co.uk/drivesafe-car-pack-for-the-htc-touch-hd-p20932.htm (only difference with the first one is a little more stiff on adjusting method) but its still perfect and safe & both are really easy to adjust horizontally and vertically the phone & they are both built for windshields which means you can video type your driving
I suggest it without second thoughts!
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Got the same one. Pricey but oh so worth it. I love it,and would def recommend it. I've tried the suction ones, and they for some reason keep falling off the windscreen, even with cleaning the surface/drying it etc.
The brodit just clips into your dash, and fit your touch hd perfect. They make mounts for every car.
I love it!!!
And it charges at a normal rate, just like a standard wall charger.
I have this one and it's excellent..
Brodit holder question
I have a cheap universal effort I bought from some motorway services - Im looking for a better solution - im using airvent attachment - its a three pronged affair which clips over one of the vent "stays". Its wobbly as hell - which is fine most of the time, except when you are attaching the charging cable. Does the Brodit attach to the airvents ? if so does it attach solidly ? in a better way than my three pronged clip ??
Depending on your car and which mount you want.
For my Xantia, using the vent beside the steering wheel the mounting plate fits in around the vent, between the vent unit and the dashboard body, rather than the cheapo ones that clip feebly to the vent.
At the moment I'm using two of the suction cup ones that people have had problems with.
Superglue is your friend (no, do not superglue it to the windscreen no matter how temping that sounds!).
The internal flange which holds the silicon cup to the base of the arm breaks up causing it to regularly fall off teh windscreen, some good superglue carefully dripped in fixes this. The other problem I've had is the ends breaking where the metal snake fits in, again superglue (pull back the concertina cover) in each end sorts this.
Ok these are things that should not go wong in a good product, but when they're available for a couple of quid shipped from China, it's to be expected, and thankfully easily rectified.
Has anyone got the details of a UK supplier of Brodit?
Anyone have any experiences, good or bad, with vehicle mounts for their samsung galaxy sII i777?
I'm looking for one that will fit with my Case Mate Tough Case on (Excellent case btw, I highly recommend)
From what I can see the samsung mount doesn't work with cases. I'd like one that can at least cleanly route the audio and charging cable to it. But ideally it would have it's own connectors and be permanently plugged into my car. I'd like to just sit down and dock my phone in it and go.
Is there anything out there just like the samsung mount that will work with the case on? This is the samsung mount I'm referring to:
http://www.amazon.com/Samsung-ECS-V...UE22/ref=sr_1_3?ie=UTF8&qid=1321380855&sr=8-3
I'm in the same boat as you are. My 3gs had this from Belkin.
http://www.amazon.com/Belkin-Tuneba..._1_2?s=wireless&ie=UTF8&qid=1321389164&sr=1-2
Looking for a mount that will do the same.
I'm really hoping someone can shed some light on this.
Maybe there are some decent universal ones out there that can be recommended?
Took forever to find it but here's the one I got:
ebay.com/itm/Platinum-MobileDock-Dash-Windshield-Suction-Mount-UUM10BB-Universal-MP3-Player-/140633919502?pt=PDA_Accessories&hash=item20be6f500e
Been an awesome mount. Bought back in July. For a few weeks it was in my glove box and the pad was not even close to being sticky. Washed it up and it's back to like new sticky.
With the opening between the two rest points on the bottom the power cord fits perfectly.
Stays on the windshield and dashboard with no issues.
And with as small as the support arm is, it moves very little from bumps in the road.
Sent from my SAMSUNG-SGH-I777 using XDA App
ExoGear Mount
There is another thread on this, but I picked this one up at amazon for $18. Awesome mount, holds any phone. While it doesn't have a connection it will hold any phone anywhere with or without a case.
http://www.exogear.com/products-exomount-car-mount-holder.html
these mounts fit a sgs2 with an otterbox commmuter case on it
http://www.slipgripcarmounts.com/Using-Commuter-Case_c_21890.html
don't know if it will fit the tough case. I haven't used the mount before
I did buy one for my naked captivate and it worked great. I burned through 3 universal car mounts before I got the slip grip for my captivate
I bought a universal one from walmart for $15. Sits on the dashboard and adjust the holder itself to fit the phone. Used the google navi on the phone while traveling from the Jersey shore to Buffalo NY and back and didn't have a single problem.
The device never popped out nor did the actual unit move.
This is the one that I am looking at.
Mounts in the CD slot of your radio... of course if you change out CDs often this may not be the best for you.
I don't change CDs that often so I think it will be ideal.
What you all think?
http://www.amazon.com/Mountek-MT5000-C-Universal-Satellite-Devices/dp/B004E5W3D4
I believe the at&t version charges at .7 amps or something. My Griffin Technology 1 Amp PowerJolt Dual Micro would be bad for my phone because I was gonna parter it with the ExoGear Universal ExoMount for driving. Would that kill my battery? This looked good till I saw the 2.1 amps. http://www.amazon.com/Potato-Techno...Android/dp/tech-data/B004NQDU5E/ref=de_a_smtd
Check out the mounts by ProClip. They are not cheap but are well made. I have a similar one to this link below that I bought several years ago for my old ipod. I still use it and have since upgraded to the ipod touch. Now will be replacing that with the SG2. Works great. However since mine is older there is quite a bit of space between the back of the holder and the phone. I simply added a piece of the foam insert you typically get when buying a phone case. Works great and now the phone/itouch doesn't tilt back.
http://www.proclipusa.com/?sectionpath=383&pageid=13758&processor=content&pcategoryid=13451&categoryid=18750&lightwindow=true&usermode=_dualselect&v_pcat=&v_cat=&year=&d_pcat=13451&d_cat=18750&have_holder=false&have_mount=true&p_pageid=1&dtype=
kipliq said:
I believe the at&t version charges at .7 amps or something. My Griffin Technology 1 Amp PowerJolt Dual Micro would be bad for my phone because I was gonna parter it with the ExoGear Universal ExoMount for driving. Would that kill my battery? This looked good till I saw the 2.1 amps. http://www.amazon.com/Potato-Techno...Android/dp/tech-data/B004NQDU5E/ref=de_a_smtd
Click to expand...
Click to collapse
It will be fine as that is the Max amperage that the charger can support. The phones hardware charging system limits current.
here's my thread on the hard wired proclip
http://forum.xda-developers.com/showthread.php?t=1317064
this particular one will not work with a case, as the phone fits very snug as it is, which works perfect for me.
It looks like my next phone is going to be a Note 3. Does anyone have any experience with a windshield mount that will work with their case? The case will need to have a holster with belt clip. My current windshield mount is from slipgrip, but most of the cases they offer a mount for on the Note 3 don't seem to have the holster option.
I drive on some pretty rough roads so I need something that will stay stuck to the window and not let the phone bounce out. I use my phone as a GPS, so the windshield mount is kind of important.
See if my car holder plus wireless charger suits your needs.
https://www.youtube.com/watch?v=ZTNAPp2UkkI
It is very very sturdy. Suction on windscreen is awesome. Even after releasing button the suction is awesome abs have to really pull to get it off. Have four other holders and they don't even come close. Screen had frozen a few times due to cold and it stays on when usually my others would have fallen off.
I use it for sat navigation and Google music streaming usually and works great.
The holder had a depression where I insert the wireless charger. You could easily accommodate a belt clip in it.
Looks interesting. The only down side I see if it looks to take 2 hands to place or remove the phone. I don't always wear a bluetooth headset, so one handed removal and installation is kind of important.
bubblesmoney said:
See if my car holder plus wireless charger suits your needs...
.
Click to expand...
Click to collapse
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
hoyter said:
I have been looking for this in the states, but cannot find it anywhere. They are getting ridiculous on ebay.
Did LG stop making them?
Might you know the official LG part number for the car dock?
Click to expand...
Click to collapse
i dont know the LG part number. The one i got is made by some one else for the LG WCP300 qi charger, i use the koolpuck qi charger in it as its a lot cheaper. The car holder is called SMART FIT2 cradle (TCD-C800P) and says designed by NEIM for LG Mobile
Not sure if its made by LG or NEIM as in the front it has a hologram sticker on the box saying FOR LG MOBILE. it was less than 25$ when i bought it, and i sent my video link to seller as was happy with product and he withdrew listing and later found all sellers had increased prices from 200$ to 600$ which is crazy. Very few sellers and hence probably demand has gone up. But the product is great and i want to buy another one too but not at these crazy prices! Hopefully soon the prices will come down once other sellers start selling the same seeing demand.
The suction is awesome and i dont think suction can get any better. One handed shouldnt be an issue as you put it in the holder when you sit in car before you drive and later only remove it when you get off. quick release button is efficient. I use the speakers on the phone as i dont like bluetooth headphones or ear pieces. The volume is loud enough for me to use google music and google navigation and phone calls come via the car speakers as mine is an older car where the music doesnt come through the car stereo and only phone calls come through car stero bluetooth connection.
I have the first and second version of the Exogear Exomount. While they have amazing suction to almost any semi flat surface AND work with cases , they do take 2 hands to put your phone in. I also have a TechMatte car mount which has a button in the middle of the back. When that button is pressed, when you put your phone in it, the mount closes down on the device. It has foam padding on each side, so it will not scratch your phone. The only issue you might have with it would be using big cases. My Spigen Bounce and Diztronic TPU fit in the mount snug, but I'm afraid that a bigger case might not fit.
Here's a link to it :
http://www.amazon.com/TechMatte-Easy-Touch-Universal-Windshield-Packaging/dp/B00G3KN9LI
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
I use this from Techmatte. Works great for me
I had an iOttie one touch for my previous phones. The suction cup mount works *very* well. Better than anything I've seen before.
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1385573943&sr=8-1&keywords=iottie+xl
To lock the phone you just place the phone in the dock and push it in. It pushes a button in the center and pulls the sides in, locking the phone in securely.
To remove, you hit two buttons on the side which releases the tension.
One handed in, one handed out.
Oh, and it's very sturdy. Doesn't bounce around like other cheaper mounts.
I ended up going with the slipgrip again. It works well for the Spigen case I ordered, so all is well.
For any of you guys that hate regular big car mounts and maybe have gotten creative or found a minimalist product to mount your note 3 in your car, please share! Im talking magnets, clips, adhesive ... anything that doesnt require a huge arm sticking out of your dash.
Im currently on the hunt and the best minimalist solution i can find currently is the tetrax fixway/xway magnets solution.
If anyone has something cooler, please let me know.
Kancerstick said:
For any of you guys that hate regular big car mounts and maybe have gotten creative or found a minimalist product to mount your note 3 in your car, please share! Im talking magnets, clips, adhesive ... anything that doesnt require a huge arm sticking out of your dash.
Im currently on the hunt and the best minimalist solution i can find currently is the tetrax fixway/xway magnets solution.
If anyone has something cooler, please let me know.
Click to expand...
Click to collapse
I can't post links still for some reason (mods?) so do a search for the InfiniApps Slyde on Amazon. Really happy with mine. Just got a second for the wife's GS4 in her car.
YMMV depending on the case you use, the soft-touch stuff doesn't "grip" to the rubber pad quite as well, so keep that in mind.
I went with the Caseology One-Touch. Very stable and sturdy.
Sent from my SM-N900V using Tapatalk
haza12d said:
I went with the Caseology One-Touch. Very stable and sturdy.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Clean. Do you think the arms that hold the phone have enough depth to hold the N3 with a qi charger plate behind it? Maybe another 1/2" or slightly less?
Hmmm... I think so. There's quite a little bit of room but then again I have the Tudia Melody case on my Note. I'm not using that car until tonight, I'll get back to you.
Sent from my SM-N900V using Tapatalk
Did somebody say minimal?
I bought this mount from ebay: http://www.ebay.com/itm/Car-Air-Ven...1564?pt=US_Mounts_Holders&hash=item3f2a732fac
and then I threw away everything but the actual phone holder. I used heavy velcro to attach it to my dash. As you can see in the pictures, I have a hard wired power cord running to it poking out of the dash.
It doesn't budge. I can't picture anything smaller that does not include a part which must go on the phone (like a magnet).
gloster2 said:
Did somebody say minimal?
Click to expand...
Click to collapse
I really would prefer something like this, but need to find the base and arms that will hold the qi behind.
Minimal mounts
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
gloster2 said:
Did somebody say minimal?
I bought this mount from ebay: http://www.ebay.com/itm/Car-Air-Ven...1564?pt=US_Mounts_Holders&hash=item3f2a732fac
and then I threw away everything but the actual phone holder. I used heavy velcro to attach it to my dash. As you can see in the pictures, I have a hard wired power cord running to it poking out of the dash.
It doesn't budge. I can't picture anything smaller that does not include a part which must go on the phone (like a magnet).
Click to expand...
Click to collapse
That ebay one looks good. Do you mind taking a picture along wiht ur Note 3 attached it to your vent, i guess you have directly attached it to your dashboard?
The problem with cd related mounts are 1. they take away the look of your dashboard specially if the interiors of your car is an eye candy *mine is :victory: * 2. On another car forum i read that car mount that attaches to your cd slot can damage the internals if you ever slam your breaks to hard and your car jolts to a stop.
I can sacrifice a vent but cannot place a mount on the top of my dashboard as it looks hideous. Plus i wouldnt want to attach a charging cable to the car mount, i usually keep my phone charged at max most of the times.. thanks to QI technology, plus if et all i need to charge my phone in a car during long drives i will keep a standby cable handy that is removable and attached directly to the phone (like most other mounts do)
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
tdd2 said:
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
Click to expand...
Click to collapse
Dan, can you post links to both the items the mount and the magnet?
I do like the Kenu Airframe Portable Car Vent Mount but they make it for the iphones and most android phones do work wiht it, but not the Note 3.
MANswers said:
Dan, can you post links to both the items the mount and the magnet?
Click to expand...
Click to collapse
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
MANswers said:
That ebay one looks good. Do you mind taking a picture along wiht ur Note 3 attached it to your vent, i guess you have directly attached it to your dashboard?
Click to expand...
Click to collapse
I did attach it directly to my dashboard using heavy duty velcro tape. Unfortunately, I threw away the vent mount which came with the phone holder. So I can't take a picture. I did use it for a few days just to see what it was like. It worked well and was reasonably stable. But, I prefer the reduced clutter of just attaching the phone holder to the dash.
tdd2 said:
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
Click to expand...
Click to collapse
Thanks i will check that out.. i think i will go with these mods as well..
tdd2 said:
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
Click to expand...
Click to collapse
I use a similar setup, but with an iMagnet rig screwed to the proclip mounting plate. Works very well, very clean, and gives you some adjustability on angle.
Sent from my enormous Note 3 via Tapatalk.
MANswers said:
The problem with cd related mounts are 1. they take away the look of your dashboard specially if the interiors of your car is an eye candy *mine is :victory: *
Click to expand...
Click to collapse
What kind of car, and what interior mods have you done? Post a pic of your car's interior.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
tdd2 said:
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
Click to expand...
Click to collapse
I need some info . . . I've decided, now that I'm using wireless charging, that I want to modify my 2 minimalist car mounts to include QI transmitters . . . I've been to every mobile/electronics/cell phone shop and/or kiosk in my area, and QI stuff around here is non-existent.
I'm looking for the smallest diameter (I prefer to try using a round unit first, oval if needed), as well as thinnest QI transmitter available - that also uses mico-USB for power (I'm already wired up with stable micro-USB 5v sources in both cars). I've done countless searches on Ebay and Amazon, and it appears the thinnest I'll find is around 9-10mm, by roughly 65mm (.35" x 2.5").
I'm kind of hoping I can get info from people who have already bought some of these, before I start buying every 'mini/micro' charger on Ebay and Amazon for comparison as to actual size/quality/other potential issues.
Thanks!
Dan