I have Parrot CK3000 bluetooth hands free car kit install in my car I can play & hear music from the speakers when I connect to my Nokia n700, but when I connect to my HTC Hero music wont play on car speakers it will play on the speakers of the phone. every thing else works when I receive call it will go to the speakers the only problem is the music,
My Hero runs VillainROM 5.4
any idea
Simple answer is that it won't work - I used to have a Parrot CK3000 and could not get it to work. Music from the Hero is transmitted using the A2DP Bluetooth profile. The Parrot, being a car phone kit, only uses handfree and headset BT profiles. I guess your Nokia used those ports to transmit music
Even if you get it to work by tweaking the Hero the sound quality would be mono and pretty poor, which is a limitation of the headset/handsfree profiles.
The newer Parrots support A2DP profile, and utilise the aux input on your car audio for good quality stereo music output, whilst still using the mobile phone input for phone calls. So does the Bury CC9060 handsfree kit, which I now use.
Related
I've spent many a frustrated hour trying to find a way to use my Bluetake I-Phono bluetooth headphones without that damn dongle and at long last, I've found a solution!
"Simply" install the WM2003SE upgrade by toenailed/xda2jojo (which is pretty bloomin impressive, BTW) and then install the HP iPAQ Bluetooth Stereo Headphones Driver Update.
This adds a "High Quality Audio setup" option to the Broadcom bluetooth implementation within the WM2003SE upgrade. Not quite A2DP but pretty damn close. Fidelity, volume, bass are pretty good, particularly considering its a wireless connection, but there are occasional "pops" and "squeaks" to contend with. The connection is so sensitive that I'm having to maintain line-of-sight between my XDAII and the right-hand (BT connected) side of the headphones. I can move several yards away but only as long as I keep the LOS, otherwise the connection degrades significantly.
It's far from perfect but its not a bad compromise until someone cracks A2DP on the XDA (something which I would happily pay £50 to achieve, if any interested party is listening).
Cheers,
Ged.
Headset Update
I've been playing around with bluetooth headset settings and I can't make it work under either BT stack.
BLUETOOTH HEADSET
Hi there mate I have V3 BTHS I tried using broadcom plus the upgrade but its not working...not sure though if I configure it correctly ...When i checked the connection on the bluetooth MAnager/Active Connection it shows an Icon in the Outgoing Connection and it is connected but i dont hear any sounds on my bt headset. What could be the problem? BTW my BT works on the orig bluetooth progy but only on the calls not in music players and sound notification. Hope you can help me. Thanks
As I understand it, you can use a BT headset for calls or BT headphones for music, but not both. My headphones are supposed to work in headset mode but they don't... for the moment at least.
Sorry I can't help further mate.
I understand "High Quality Audio setup" is A2DP. There is nothing more to achieve.
Surur
Okay I have the Bluetake i-PHONO on order. Can someone please tell me if it's possible to use them as stereo headphones and a headset at the same time? When you add the Bluetake to your BT setup as high-quality audio, can you add it at the same time as a BT headset? Does it show up as two icons in the BT manager? The Bluetake is supposed to automatically switch between A2DP and headset/handsfree profile... What I want is to be listening to music using media player over A2DP, then hit the button on the Bluetake and pick up a call. Isn't this the way it's supposed to work?
BLUETOOTH HEADSET
oh ok now it makes sense hehe. thanks PinkySlayer. Iphono is bit expensive though its almost a price of a mini ipod...
Expensive they may be, MTX, but I HATE cables, and what's the point in carrying around an MP3 player when you already have one in the form of an XDA (albeit with a few 1GB SD cards in tow)!? I'm working towards a personal nirvana of "single music source, multiple outputs"; I have an FM transmitter wired up to my GPS enabled car cradle so both my WMA and TomTom audio come out of my car speakers; I have wireless Sennheiser headphones for the house and now and now I have wireless BT headphones for mobile use.
I didn't think that was the case, surur. It certainly isn't in practican terms in that the Bluetake phones work great with their own BT dongle (which truly supports A2DP) but with the "High Quality Audio setup", things arn't so rosy.
That's what the Bluetake phones are designed to do, trhuseby, but I think the only way to achieve that at the moment is to use the BT dongle for music playback and then connect your XDA direct to the phones in headset mode. I believe that the phones would then automatically swap from music playback to headset mode when a call comes in, but you have to use that bloody dongle.
The settings for "High Quality Audio setup" do allow the (de)selection of both audio and headset connections but alas, this does not make it work.
BT HEADPHONE
yeah i hear you Pinkyslayer...I really like to have a bt headphone i'm just looking for a cheaper headphone. i was thinking on buying a HP or Toshiba headphones
http://ces.engadget.com/entry/1234000003026291/
will this work? Thanks
Can't see why not.
trhuseby said:
Okay I have the Bluetake i-PHONO on order. Can someone please tell me if it's possible to use them as stereo headphones and a headset at the same time? When you add the Bluetake to your BT setup as high-quality audio, can you add it at the same time as a BT headset? Does it show up as two icons in the BT manager? The Bluetake is supposed to automatically switch between A2DP and headset/handsfree profile... What I want is to be listening to music using media player over A2DP, then hit the button on the Bluetake and pick up a call. Isn't this the way it's supposed to work?
Click to expand...
Click to collapse
Hi, finally did you try the Bluetake? Did you found any solution or stereo headphones with headset working for you?
Thanks
Does anyone know of a adapter I can use to connect my 8525 to my car cassette player to play some mp3s?
Casette adapter
I'm using regular (wired) casete adapter which I got from RadioShack and connect it to R35 which in its turn is paired with TyTN. By this I can listen mp3 stored in mн PDA as well as on-line radio through car speakers. I should note that quality is much better than I expected, better tha regular radio (not HD )
Wonderful news thanks..
I installed the Sony MEX-BT5000. Its able to stream audio from the tytn via BT. Very nice, it connects automatically when I start the engine. I also use it as my handsfree for calls. At first, callers said they couldnt hear me loudly, so I flipped down the faceplate during calls and now calls are good. This is because the mic is behind the faceplate.
Just thought I'd throw it out there...another option to connect the tytn wirelessly.
kwan said:
I installed the Sony MEX-BT5000. Its able to stream audio from the tytn via BT. Very nice, it connects automatically when I start the engine. I also use it as my handsfree for calls. At first, callers said they couldnt hear me loudly, so I flipped down the faceplate during calls and now calls are good. This is because the mic is behind the faceplate.
Just thought I'd throw it out there...another option to connect the tytn wirelessly.
Click to expand...
Click to collapse
This is wonderful news because I was just looking into some bt radios..
Do you have a BT headset? I'm curious if I can still use my headset while in the car and just do the audio part..
I do have a BT headset, but I found that the combination doesnt work well. I tried to split the audio streaming to the headunit, and then the handsfree to the headset, but the results were unreliable at best.
I've found that the headunit mic is good enough quality to speak through, as long as you flip down the faceplate. If you dont want to use the handsfree, you can use the audio only and regular Tytn phone. The BT connections are separated by Sony.
Interestingly enough, I was able to internet radio stream via BT to the headunit, and run Tomtom navigator 5 BT GPS unit at the same time. The music volume was decreased and the directions came over the music.
I guess I could just turn off my headset while in the car. I assume it will mute the radio when calls come through..
So you don't get any skipping or anything while playing mp3s?
Do you store your mp3s on a storage card?
Mp3s stored on storage card and internet radio streaming doesnt skip connected via bluetooth.
What is a R35? Is it a BT radio reciever of some sort?
I just experienced a bug. I got in mij car, enabled bluetooth and stared the enging. I could hear the touch cruise connect to the parrot bluetooth carkit (usually it beeps twice, now it beeped 4-5 times).
I fired up my TomTom, instructions were given over the speakers of my car stereo (via carkit)!! I did some testing with other audio files, all worked over speakers.
Quality wasn''t sufficient for audio, but e-books and podcasts sounded good enough.
After a few minutes of playing arround I received a call, after hanging up the call the usual way on the carkit shut down the possibility to hear audio over the car speakers.
Anybody know a way to force audio over the car speakers through the handsfree??
Try this tool:
it sends all the audio signals to the headset (or BT Carkit)
Would it be possible to switch bluetooth audio on just when there is a sound to play, cause it seems a little bit useless to hear nothing when my navigation has nothing to say..
How do I get all audio on my Verizon Touch Pro to play through my bluetooth earpiece?
With my Motorola Q, I connected the bluetooth device, it changed to a Headset profile and all audio (tcpmp, windows media, etc) played through the bluetooth device.
When I connect the same bluetooth earpice to my Touch Pro, the only time it activates is if I hit voice command or once a call is connected.
I also have bluetooth stereo headphones with that stereo profile and those do get audio from Windows Media player.
How do I get audio from TCPMP/Windows Media to play through the Hands Free profile that the bluetooth earpieces I have use?
Anyone able to help with this? I'm disappointed that I can't listen to audio through a bluetooth headset with the hands-free profile.
There has to be a simple fix.
Tap and hold the name of the headset and tap 'Set as Wireless Stereo.'
That option is grayed out for my mono headsets.
Any other ideas?
lexluthor said:
That option is grayed out for my mono headsets.
Any other ideas?
Click to expand...
Click to collapse
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
sidwin said:
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
Click to expand...
Click to collapse
Yes, I understand that.
But, my question is how can I get audio to come through my mono bluetooth headset when it's connected? On my Motorola Q, ALL audio routed through the headset when it was connected. On the TP, only if I start voice command or make a call does audio get sent to the headset.
I use the headset to listen to podcasts, so that's what I'm looking for.
I did find a program that would route all audio through the headset, but I do have to run it each time I connect the headset. I suppose that will suffice though.
Hi
Can anyone confirm that Sat Nav commands are streamed to a blue tooth speaker ?
I would like to use the Sat Nav on my phone but the in-built speaker isn't upto the job. A simple blue tooth speaker would be fine, if it works. . . .or are there any other alternatives.
Any help or recommendations would be most welcome.
Ta
Hi
I will test this at work today for you as i have bluetooth speakers there can also check an fm transmitter if you want to go down that route
I use a Venturi mini (http://www.myventuri.com/home.aspx ) and it stream BT sat commands, phone calls and even my .mp3 music to my car radio, separate or even together.....it's excellent, especially as it's powered from cigarette lighter socket
Thanks for this - I do like the look of the Venturi mini, and the usb charging function would be ideal, but I would prefer an independent speaker so that I can still use my cars radio/media player. What it does prove is that I can stream commands using A2DP to a bluetooth device.
I can confirm BT speaker output for two navigation softwares:
IGO8 and ALK Copilot.
Using a Blaupunkt car audio unit named "Hamburg MP68" with A2DP streaming.
Working quite well, the same as my BT stereo headphone, a Plantronics 590E.
If you connect a bluetooth headset/ a2dp device, all sounds should play over bluetooth, so it should work without any problems
accountabc said:
If you connect a bluetooth headset/ a2dp device, all sounds should play over bluetooth, so it should work without any problems
Click to expand...
Click to collapse
Yes, but some devices, such as the Jabra BT3030 go into standby between commands and by the time it has come to life again, and received the audio half of the audio is missing, or you don't get any of it.
Well I'm going to try a Jabra SP700 and see if it works - I'll let you know.
My Jabra SP700 works fine with TomTom & streams music. I'd certainly recommend it.