Hi,Frieds..
My NIKI100's bluetooth doesn't work suddenlly . There is always on in comm manager,but i cann't turn it off anyway.
I find out the Bluetooth address is 00:00:00:00:00:00 in device's information. I have been try to change some SPL(1.16hard/1.15hard and now is 1.22hard), some ROMs (WM6.5/WM6.1/WM6.0) and Radios(1.58//1.65/1.71), it still doesn't work.
Any body can told me what's wrong with my NIKI.How can i do....
THANK YOU...
kc333 said:
Hi,Frieds..
My NIKI100's bluetooth doesn't work suddenlly . There is always on in comm manager,but i cann't turn it off anyway.
I find out the Bluetooth address is 00:00:00:00:00:00 in device's information. I have been try to change some SPL(1.16hard/1.15hard and now is 1.22hard), some ROMs (WM6.5/WM6.1/WM6.0) and Radios(1.58//1.65/1.71), it still doesn't work.
Any body can told me what's wrong with my NIKI.How can i do....
THANK YOU...
Click to expand...
Click to collapse
Did you try your original rom ?
Rataplan said:
Did you try your original rom ?
Click to expand...
Click to collapse
Thank you for your reply,Rataplan..
As you said, I tried it. But no effect. It's really awful. Is it problem with hardware?
Have you any idea
kc333 said:
Thank you for your reply,Rataplan..
As you said, I tried it. But no effect. It's really awful. Is it problem with hardware?
Have you any idea
Click to expand...
Click to collapse
If it doesn't work with the original rom, I'm afraid it could be an hardware issue,
I will search the site and see if it could be another problem.
Keep you informed
Rataplan said:
If it doesn't work with the original rom, I'm afraid it could be an hardware issue,
I will search the site and see if it could be another problem.
Keep you informed
Click to expand...
Click to collapse
Thank you for your help. Waiting for your good news...
my Niki's Blue LED does always flashing when i turn on the phone. but BT doesn't work.....what's wrong on it... It is disapear when i turn on the comm manager UI. I found BT's status is ON, i can not turn it off anyway....
Related
I believe most people face this problem. I hv no solution to it, but I personally believe this is not a hardware prob and it can be solved. Hope to start this thread so everyone can discuss this together and come up with something.
got this from other thread...
bull_do3er said:
put registry editor shortcut in \windows\startup
put wififix.reg in \Program Files
all this does is set the HTCPreloadwifi=1 everytime i need to reset my device. i think the problem is the value was resetted to 0 everytime you reset your device. That's why the wifi doesnt work. not sure if this works for everyone. but for me its working nearly everytime.
Click to expand...
Click to collapse
is this a good idea?
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
i faced the prob which when u set the HTCPreloadwifi to 1, it revert back to 0 after soft reset. then i found that this is actually bcoz of the file "WiFiInit", which is in the startup. so i removed it from the startup, set the HTCPreloadwifi to 1, then power off and on it instead of soft reset (soft reset might work, just play safe.)
rondol1 said:
Pehaps it is useful to give some more specific details. Indeed there are several users that run in to these problems, but many more (including myself) never experienced any misbehaviour whatsoever. There must be a difference somewhere.....
Click to expand...
Click to collapse
rondol1, will you stay here in this thread. who knows, we might spot the difference between your "working" device and our "half-working" device. appreciate that.
The point is, I never changed anything after flashing the ROM and WIFI works right away. I have noticed that with WEP encryption enabled things don't go that smooth. Without security OR with WPA enabled, I don't experience any problems with WIFI. About Bluetooth, I really don't use it, only to connect my TomTom GPS receiver and that give no problem whatsoever. But that comparison isn't fair, cos the TomTom app takes care of it by itself, without the general WM6 settings.
Perhaps it's good to mention that I use the latest WM6 builds, I red your post in some threads from older ROM's too. Could be that those earlier release had more bugs on this point.
i'm using Fantastic Mobiz v2.0b4....actually wanna to load up other new wm6, but instead of avoiding, i think we shd try to solve the problem..
anyway, i am thinking about whether there is anything wrong with the registry that caused the prob, or any 3rd party software that is interrupting the bluetooth's functioning. is there any way to "compare" the registries?
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
rondol1 said:
I don't know, but I hardly use any 3d-party software. And about solving the probs on early WM6 builds: isn't that a Microsoft job? If there is a problem in the OS, we don't gonna solve it by changing some regs!
Click to expand...
Click to collapse
haha...ya...but i meant a cooked version of wm6. the developer might hv added something which works on his but not on others. any assumption hv to take into consideration. i guess that is how most probs are solved.
seems like no one patronize this thread...ahah , anyway i will still try to update what i've discovered until the next version of rom is up. who knows, people might be desperate and found this thread. i just hope someone will join in the discussion or i will look like a bloody fool who participates in my own thread.
right now, i insert btdwake and btlauncher to my startup folder. it works most of the time (not sure it works bcoz of the files that i put in the startup folder).
i still think that it might be a registry problem. will compare the registry with a working set's one of these days.
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Gaexu said:
I've got also a problem when trying to enble Wifi, what you've done exactly? Does it works?
Click to expand...
Click to collapse
hi Gaexu. well...it is easy to make things work, but problem lies on the steps that make them work. enabling my wifi is fine, but not perfect.
I suppose your prob is when u go to comm manager, click on the "Wlan", then u see the radar (loading), after that, nothing happened, the icon still show the grey icon with the cross.
steps:
1.)first you gotta remove a file called "WiFiInit" from \windows\startup\ folder.
2.)next, go to the registry using PHM Registry Editor. go to HKLM\Comm\TNETWLN1\Parms, there are 2 reg dwords - "HTCPreloadStatus" and 'HTCPreloadWifi". change their value to "1".
3.)power off the device and on it back.
the reason to remove "WiFiInit" from startup is bcoz it seems to cause "HTCPreloadStatus" value to revert back to "0" after a soft reset. actually i've remove a few more things from startup, but i dun think there is any "linkage".
sorry about this, but don't expect the wifi to be enabled as easy before upgrading (at least not for me). to enable the wifi for the first time (after you soft reset everytime), go to comm manager, click on WLAN. then the radar thingy comes out, rotate a few round and disappear. while it is rotating, observe the "G" on top, it changes to the wifi icon and revert back to the "G". that means wifi is detected. click on WLAN again, and same thing will happen. now, push the on/off button to black out the screen(standby mode) and turn on again. wifi comes alive.
i am too long winded. this is my first time in my life typing more than 6 lines in a forum. do let me know if it doesn't work. good luck.
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Gaexu said:
Thanks for your help
The Wifi works, but just for about 30seconds or 1minute... then it turns off
does anyone know this problem?
I will try it again and again,
thanks
Click to expand...
Click to collapse
hv u change the value in the registry?
Yes, "HTCPreloadStatus" and 'HTCPreloadWifi" have the decimal value 1.
HTCResumeWifi = 0
I will retry it with another network (not the one from my University) maybe it works...
Gaexu, so how's your bluetooth? working perfectly?
i looked through the registry and found that many of the bluetooth keys are incomplete after comparing with other devices...but i need to extract more info from a workin prophet...
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Gaexu said:
Hi scarymoviesg
Now my Wifi works perfekt (not with the one from the University but with all the others)
Thanks a lot!!!!!
Click to expand...
Click to collapse
glad that it works... anyway...how's ur bluetooth?is it work?
Anyone know how to solve this problem?? The phone won't go into standby mode. it just stays at the lock screen
Video on my problem
http://www.youtube.com/watch?v=ej_TzilZITk
Anyone can help please??
no one can help me??
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
watcher64 said:
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
Click to expand...
Click to collapse
I made a hard reset, the problem still exist...
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Well that lock screen in the video is not the stock lock screen, what mod are you using on it ....
Whatever mod you are using, could be the problem ....
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Are you using CHT lockscreen? Just use the standard one and it should be alright.
nicedude_abad said:
Are you using CHT lockscreen? Just use the standard one and it should be alright.
Click to expand...
Click to collapse
Ditto ...
Not sure how many times this needs to be said ...
But going to join you in saying it again ...
Like i said, i done a hard reset and the problem still exist, which means that the problem does not lies on CHT.
btw i am not using CHT, this video that i posted is just for reference of my problem. (which the phone does not go into standby mode and need activesync in order for it to enter standby mode) the lockscreen that i am using is the orginal HD2 lockscreen.
Same Problem
I'm having the exact same problem with my hd2. I've tried the following things to resolve it:
- Soft reset
- Hard reset
- Task 29 reset
- Formatting my sd card
- Using Artemis and Chuckyrom, both same problems
I'm going to try a stock rom now and look if that works.
Are there more people having this problem? any solutions? Tx!
EDIT: I've installed the stock rom and replaced HSPL with SPL. I'm still having the same problem. I'm going to send it to the manufacturer. Good Luck!
Would you be so kind to come back with the result ? This is a very confusing problem. There are lots of people suffering from this already !
solved
i two have had this problem and have just found out how to sort it out. basically i tried everything new radio, rom, getting rid of CHT
and in the end all it was is the usb connection!!!!
all you have to do when unplugging your usb cable is make it come out on a angle left to right. there are obviously some very delicate contacts that get knocked out of kilter making the phone think its still on mains power when its not hence never turning off
you can confirm this error by unplugging your phone going into backlight settings and seeing if you can adjust you light setting on battery power if when you adjust your light setting nothing happens you got the same prob as me
I tried all the rom up but have made an error when a call back off-screen. Meanwhile I have to use a different phone calls on my phone screen light back to new. I have tried all the rom were 2.1 Baseband2.1.54 but all it errors. how do bright again when the call in the rom version 2.2 did not make mistakes. Please help me because my job sometimes to take pictures and video. sorry for my very bad english
Can anyone help me?
I would but I have no idea what you're trying to say :S Sorry...
fiscidtox said:
I would but I have no idea what you're trying to say :S Sorry...
Click to expand...
Click to collapse
that make 2 of us LOL
when I make a call, My phone is turned off the light. I use all hardware keyboard but the screen still does not light back. I use a different phone calls to my phone then screen to return to normal. I tried all the other roms, but all were so. the rom 2.2 not defective. older roms are not defective. are way to overcome error?
hoangnam1002hn said:
when I make a call, My phone is turned off the light. I use all hardware keyboard but the screen still does not light back. I use a different phone calls to my phone then screen to return to normal. I tried all the other roms, but all were so. the rom 2.2 not defective. older roms are not defective. are way to overcome error?
Click to expand...
Click to collapse
the light?
what light?
don`t you mean...screen off?!
if that`s the case you may have some problem with your phone. i`ve been using custom roms since 1st day and never had any issue regarding that (if THAT is the case)
screen off. I tried to restore via Sony Ericsson PC Companion, but still did not fix the error. only thing when I use the build number old 2.0.2.A.0.24. all errors are gone.
hoangnam1002hn said:
screen off. I tried to restore via Sony Ericsson PC Companion, but still did not fix the error. only thing when I use the build number old 2.0.2.A.0.24. all errors are gone.
Click to expand...
Click to collapse
then go to store!!! you have a phone problem. that`s your issue
edit: put a firmware that doesn`t work so they can see the problem
rendeiro2005 said:
then go to store!!! you have a phone problem. that`s your issue
edit: put a firmware that doesn`t work so they can see the problem
Click to expand...
Click to collapse
LOL you're nasty lol
iMatth3w said:
LOL you're nasty lol
Click to expand...
Click to collapse
LOL
I´m not being nasty. I`m serious LOL
If he says that work on 24 and doesn`t on any other...
@hoangnam1002hn
could you upload you build.prop from system folder please? so i can see?
My build.prop from system folder
Code:
http://www.mediafire.com/?b1jj5bje84meeh4
hoangnam1002hn said:
My build.prop from system folder
Code:
http://www.mediafire.com/?b1jj5bje84meeh4
Click to expand...
Click to collapse
try the one attached
paste to system
press and hold, click permitions and select all.
reboot
see if it work now.
if it doesn`t go to store if the phone still on waranty
Hello,
I have a problem when using the phone with bluetooth headset.
When I perform a call from the device using the BT headset the other side hears my voice very distorted.
However when I receive a call the other side hear my voice very well.
I tested two different BT headsets and they all have the same problem.
I also tested those BT headsets with Samsung Galaxy S2 and they worked correctly.
Please help me solve this problem.
did you get any answer
hello
my problem is as you describe
did you get any answer for that problem?
thanks!
ykaltum said:
hello
my problem is as you describe
did you get any answer for that problem?
thanks!
Click to expand...
Click to collapse
It does not work with certain network providers. In my country we have 3 cellular providers Pelephone,Cellcom, and Orange. Only Cellcom has a problem.
There is some kind of interference between BT transmission and Cellcom broadcast. My guess it is a HW issue in THL cellular phones.
So the best solution is to switch cellular provider.
toda HAVER
so you israeli also
can you call me - MOD EDIT: Removed
toda!
ykaltum said:
so you israeli also
can you call me - MOD EDIT: Removed
toda!
Click to expand...
Click to collapse
Sorry,
I would like to keep my identity anonymous.
Also I would like to share the problem with other members.
what can i do?
va4ik said:
Sorry,
I would like to keep my identity anonymous.
Also I would like to share the problem with other members.
Click to expand...
Click to collapse
no problem
but my supplier is cellcom
i cannot go to another supplier
is there any thing i can do to fix it?
ykaltum said:
no problem
but my supplier is cellcom
i cannot go to another supplier
is there any thing i can do to fix it?
Click to expand...
Click to collapse
I also found this bug in THL W100. This is probably design bug in all THL line of phones.
This phone is designed for Chineese market and I guess there were no problems with Chineese providers. Also they may have skipped some of the tests or limitations to reduce the phone price.
Aparently this is HW issue, so no software can fix it.
The only way to fix it is to switch the provider or give up the phone.
va4ik said:
I also found this bug in THL W100. This is probably design bug in all THL line of phones.
This phone is designed for Chineese market and I guess there were no problems with Chineese providers. Also they may have skipped some of the tests or limitations to reduce the phone price.
Aparently this is HW issue, so no software can fix it.
The only way to fix it is to switch the provider or give up the phone.
Click to expand...
Click to collapse
I also found another solution if you move your phone to GSM mode only, it also solves the problem.
This can be done in settings menu.
any other ideas ?
va4ik said:
I also found another solution if you move your phone to GSM mode only, it also solves the problem.
This can be done in settings menu.
Click to expand...
Click to collapse
Hi guys ,
I am also on GOLAN network - which is "Cellcom" based . and having same problems...
Did you find any other ways of correcting this problem ,
cause moving it to GSM only has it's issues...
any ideas?
THL-User said:
Hi guys ,
I am also on GOLAN network - which is "Cellcom" based . and having same problems...
Did you find any other ways of correcting this problem ,
cause moving it to GSM only has it's issues...
any ideas?
Click to expand...
Click to collapse
If you can just switch to another provider. It is the best way. I use Ramy-Levy. It works well.
Is there a solution for this?
va4ik said:
If you can just switch to another provider. It is the best way. I use Ramy-Levy. It works well.[/QUOTE
Does amyone manage to solve this issue using Cellcom?
Click to expand...
Click to collapse
Fixed
16-12-13 SOLVED:
Looks like i found a fix for this, problem is in one of the parameters of the audio speech enhancement settings.
this is what i did :
enter engineer mode through moble uncle tools or gravity mod.
go to hardware testing
select audio
select speech enhancement
change common parameter to BT earphone
change parameter0 to parameter12
change the value to 20488
press back several times
reboot phone and test it
i came to this solution by comparing the differences to my jiayu in witch this was recently solved.
THL W8-16GB
Jiayu G4 Advanced 2GB/32GB
SAMSUNG GALAXY TAB2 7.0
one extra problem
After making a call (I use Lenovo p780) when I'm on 3g, the phone "falls out" the network. It restore the connection in few seconds, but it's annoying. It doesn't happen always, but very frequent
When I change my phone to 2g mod, it works well, but in 3g- the problem is there
any solution?
I doubt it
lisawang said:
maybe 3g signal strength is not very good, you can use your SIM card change a phone to try.then you can know the problem is phone or the signal strength
Click to expand...
Click to collapse
I doubt it
with another phone it works well
BUT same phone no BT it woks just as well
it's something to do with 3g & bluetooth together
hey everyone... I've got a problem.... when I'm talking with someone with loudspeaker.., when I off the speaker, they can't hear my voice until I again turn on the speaker.... but starting call in normal mode i.e without switching speaker, they can hear my voice... can anyone suggest me?any solution?
p.shashikiran94 said:
hey everyone... I've got a problem.... when I'm talking with someone with loudspeaker.., when I off the speaker, they can't hear my voice until I again turn on the speaker.... but starting call in normal mode i.e without switching speaker, they can hear my voice... can anyone suggest me?any solution?
Click to expand...
Click to collapse
Make sure when you are switching from Speaker mode, you switch into "Handset Earpiece", and not something else like a connected Bluetooth. Also, be sure you didn't accidentally press "Mute" to mute the microphone.
p.shashikiran94 said:
hey everyone... I've got a problem.... when I'm talking with someone with loudspeaker.., when I off the speaker, they can't hear my voice until I again turn on the speaker.... but starting call in normal mode i.e without switching speaker, they can hear my voice... can anyone suggest me?any solution?
Click to expand...
Click to collapse
Funny I had the same problem with my old phone (Z3v), one reason I got a new one before the warranty expired, never figured out why or how to fix it, new phone works fine in that respect.
Sorry not much help.
GigaSPX said:
Make sure when you are switching from Speaker mode, you switch into "Handset Earpiece", and not something else like a connected Bluetooth. Also, be sure you didn't accidentally press "Mute" to mute the microphone.
Click to expand...
Click to collapse
I've not connecyed to bluetooth ...; tried turning off the noice suspension also... but it didn't help... trying for the solution hardly...
1linuxfreak said:
Funny I had the same problem with my old phone (Z3v), one reason I got a new one before the warranty expired, never figured out why or how to fix it, new phone works fine in that respect.
Sorry not much help.
Click to expand...
Click to collapse
ofcourse not much help.. but thanks...
Maybe try reinstalling Advanced Calling?
Sorry not much help.
AddictedToGlass said:
Maybe try reinstalling Advanced Calling?
Sorry not much help.
Click to expand...
Click to collapse
advance calling? but how? can u please tell me
Can you go into the service menu and test this out? Look in the section on here "Tips and Tricks" for how to access the service menu.
*#*#7378423#*#* as if you are dialing that number.
ya.. tried... they are working well... the problem with switching them while in a call...
I've flashed this tool http://forum.xda-developers.com/crossdevice-dev/sony/mod-call-recording-mod-t3102277 to activate call recording.... may be this is infecting....
Can we undo flashing?
That thread doesn't even list the z3V. You must be carefulwhat you flash.
p.shashikiran94 said:
I've flashed this tool http://forum.xda-developers.com/crossdevice-dev/sony/mod-call-recording-mod-t3102277 to activate call recording.... may be this is infecting....
Can we undo flashing?
Click to expand...
Click to collapse
Why do you need this? There are probably plenty of other alternatives, but this is most likely not going to be helpful for you. If you want to revert the issue, flash back the stock Lollipop.
ya .... I've done it. but restore didn't help. anyway successful!