Related
well i did the silly thing and did a flash upgrade on my atom exec to WM6 v7
it went 100% restarted fine
but now!!!!! im stuck on the align screen it doesnt listen to my taps, if i move my fingers all over the screen it eventually pick it up but it isnt accurate enough so keeps restarting the test align session... HELP PLEASE i have meetings comming up and need this phone
i can get into boot loader mode but when i connect phone to laptop it doesnt connect active sync while in bootloader mode...
can i skip this screen align somehow
You are not suppose to upgrade the EXEC with the ROM .
Check out the WIKIPEDIA ATOM solutions page for assistance.
I think therz a way to get back to the ORIGINAL ROM , ask a SENIOR for help also search the forums for older posts , i remember someone with ths same problem as yours
really? i just ran the utility here:
http://forum.xda-developers.com/showthread.php?t=333165
without making any changes to it
how do i go back to original pleaseeee help someone... if i got in boot loader mode and run the same upgrade utility (as linked above) it lets me click upgrade but then quickly says connection failed and then my bootroom reads:
"please use DSUU in OS mode and sync with PC first!!!
where do i get original and how do i do it please... maybe there should be a sticky for stuff ups like this
wow no one is kind enough to help... ive tried this:
http://forum.xda-developers.com/showthread.php?t=331818&page=1
but it freezes on 6% and i took the advise read in the wiki to hard reboot then run DSUU , and it does the same thing (stuck at 6%)
well now i have the wm5 starting but its stuck again on the tap the screen? ignoring my taps...
could it be my screen is stuffed? although it worked before the flash
okay !!! progress!!!! ....'
ive finally called o2 and put their rom and it works to a certain point, the align screen detects my taps but it just keeps repeating over n over n over asking me to keep taping around the screen???
Hard Reset
I think hard reseting it once should solve the issue...........if it doesn't try reflashing it once again.....worked for me............brute force is needed sometime
no i figured its screwed my digitzer somehow so im asking for calibration data in other post
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
SHIK1 said:
Help needed.!!!
My phone suddenly started turning off today and did the vibrate then freeze on boot issue on me.. (overheating?? far too quickly)
so i thought ok .. i'll put a stock rom back on 3.14 uk (not actually able to download for my serial number from htc.com but i got it off the forum, original rom was 1.66 i think a few months back)
I did this and it still over heats..so i thought i'll remove hspl and put stock spl on to take it for repair/return sell to cex or something.
i got the 3.14 nbh and renamed in LEOIMG and everything was fine an seemed to be flashing ok..
it was at the red/green/blue screen for ages and the text did display spl.304 rather than hspl.. so i thought..cool..its done.. so i removed the battery and put it back in..
BAD MISTAKE!!
i get these errors issues now:
triangle with software update failed try again when i turn it on
0028022 "not allow" text when i go into bootloader
i cant load a rom because i dont seem to have hspl anymore
i get "upgrade rom coded error try again".. on the coloured screen in boatloader
i get critial error bad spl version when i try to use hspl2/3
when i try to flash with stock rom again i get to 2% then get the errors:
invalid vendor id error 294
then goes to software update failed triangle try again
am i basically f**ked???
Did i remove the battery mid flash during the spl bit?
PLEASE PLEASE HELP WISE PEOPLE!!
Click to expand...
Click to collapse
****.... tough luck mate....
As long as u got rid of hspl you should be able to get the phone fixed by htc or tmobilie or whatever plan ur on..
Good luck
bought it off ebay..so cant really take it to my provider..the phone is over (just) a year old so probably not in htc warranty? how do i check?
i will donate money to anyones paypal account if they can help fix this
Install the correct stock ROM (the one who match with your S/N) over SD.
how do i know which matches? and how do i do it via sd?
SHIK1 said:
how do i know which matches? and how do i do it via sd?
Click to expand...
Click to collapse
Put in your serial no of your phone (found underneath the battery) into the HTC support website and you will find the ROM that matches your phone. You will then need to download the ROM, extract it and take the .img file out of it and rename it as LEOIMG as before and flash via SD card.
shouldn't even need to use sd card. the correct rom should downgrade the spl over usb.
phone into bootloader,connect usb, run your update .exe, done.
you are guilty of getting over excited and lack of research. five minutes should have told you that you can't use hspl to install 3.14, and that flashing from sd first removes hspl,changes spl, then runs the compatibility tests again and shows exclamation mark if it fails.
I had the same problem i thought i bricked my htc which i was testing before buying i know stupid idea brick the phone before i buy it, basically i had installed hspl 2.08 from 1.42.00 and installed the froyo ROM build which was all good it was working but running really slowly, i couldnt get the ringtone to change which was probably due to the fact that the build did not come with any preinstalled which is fine as i downloaded a ring on mp3 and set it as that, and the radio was one of the latest which wasnt giving me a good reception so i decided, fine that's ok let me get my hands on some apps now so i downloaded a couple tweaks, multiboot and games and put them on my sd card; as well as a tweak to enhance the speed as it was going really slowly on the android, the second i put my sd card into the phone and tried running metamorph an app i was advised to use to apply a windows 7 mobile theme the phone went blank, the only way to get the phone into tri coloured screen mode was to plug it in via the FRONT usb port of my machine which would bring my phone back to life.........oh so i thought, so i was able to see the phone load up to htc white load screen and it would display my buil in red BUT after that it should show the "quietly something something message" and load right.....WRONG the phone just restarted and it would just do the same thing go to htc and restart so i managed to use the vol down+cancel call button to kick it into the tri coloured screen and managed to get the phone back into hspl 1.42.00 which completed but then i still couldnt get past the htc welcome screen!! ARGHH!!! So after spending a whole night applying different hspl's and trying to reflash teh rom via usb and failing i thought id give up and just pay for a bricked phone which i was paying £150 for btw (i know a bargain and brand new!!!) BUT as i came into work today i thought let me try a different pc as that may affect it, and after i downloaded an official ROM update for the phone 1.72 i i plugged my phone in and after literally 20 seconds the bloody thing turned on and started working as normal with no multiboot or rom installed i think i shall be CAREFULLY installing android on the phone one last time. . . . I hope this helped any users out there as i was panicking, and please remember that whatever you do is seriously AT YOUR OWN RISK, do not just jump the gun...sit down do some proper reading and watch some videos because after having to trouble shoot i must say im pretty good at applying roms hahahah i shall be very cautious from now on though. . .. sorry if the post was too long i am a noob my first post!!
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
So u managed to save ur HD2 and now u wanna swap it?
keep HD2. Its great, and so many possibilities. U must know what ur doing, tho (kindof)
Also, his link for donation is everywhere. 'DONATE' 'DONATE TO ME' 'If you like my work buy me a beer'
haha..oh yes missed the donate button..
im a bit sick of the winmo set up... it's just abit too fiddly with soo many settings to mess with..plus the handset gets hot too quickly recently and turns off, vibrates when i turn it on and freezes... need to get rid before it gets worse.. cant be bothered with the hassle.... besides.. i like the android phones..so ill go back to them...
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
aminuli said:
right im having some real issues now, i decided NOT to mod my phone again, because once my phone started up again i had to insert the simcard so i turned the phone completely off took out the batt and re-inserted the simcard and then it was bricked again (htc welcome screen, then restarts then back to htc welcome screen and repeat) after that i tried another go at installing the hspl again i just took a random version tbh and tried that as mine is factory unlocked uk htc, and then it failed i then took out the battery and notice that the spokes that connect to the metal part of the battery was a bit crooked so i carefully reseated the battery and hey presto its working again ( i can get into the phone home screen etc) so i quickly downloaded the origional spl from theunlockr"dot"co(m)/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/ and installed it and then gave the phone a factory reset and now it seems to be back to how it would be if it was brand new but now im in a dilemma as i dont know which spl to use as well as what rom is best suited for teh spl and radio because i do not want to brick my phone again because if it does i will end up going back to the phone that has lasted me the longest nokia 6200 XD
Click to expand...
Click to collapse
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
fred_up said:
Firstly you haven't bricked your phone. Bricking your phone means that it is reactive as a brick - it does not switch on.
To get the latest standard ROM, then go to the HTC website for your area, select the ROM you require and enter your phone's serial number. If you are entitled to use that ROM, then it will download. If not then you will get an error message. You may have to select your operator's version of the ROM.
Click to expand...
Click to collapse
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
aminuli said:
ok the phone failed to boot up, I did go to htc's website and i did type in my serial number yet i got an error for each rom i chose so i ended up just downloading one im pretty sure mine came with 1.42 originally its working fine now just need to try out a new radio and re install the rom
Click to expand...
Click to collapse
Assuming, from your icons, that the HD2 is locked to O2; therefore you should be able to download the O2 1.72 ROM (no HSPL required) and it will not invalidate your warranty.
nope thats just what tariff i am using. . .Ive been looking around and now im qutie confused i thought the process for having android on the htc was literally
Download a hspl and install - reset
Download a radio and install - reset
Run CLCARD.EXE then HARET.EXE and presto were in android, now unless something has changed is this right because im about to.
Download hspl3 and install - reset
Download radio and install - reset
Download a ROM and install and - reset
now is this the neccessary steps or am i about to mess up my phone again =.=
It would be helpful to know which ROM, RADIO and SPL you already have.
As for running Android, all that is pre-required is that you have the minimum .50 RADIO (it should be specified in the Android ROM's page). Although flashing the newest RADIO (2.15.50.14) won't do any harm.
Although I am with T-Mobile UK, I have the HTC 1.66WWE ROM, 2.15.50.14 RADIO and 1.66HSPL (via HSPL2). I downloaded an Android version and installed it on the SD Card. It works fine. Since I only tried it a couple of times, I can say that it boots and generally works. But I prefer WimMo.
SHIK1 said:
yes.. i managed to fix it.. the same way kurt willems above mentioned... i installed the stock voda rom that matched my serial number.. kurt send me you paypal email and i'll bung a few quid in for your help..
gonna swap this phone for the galaxy s... good swap?
Click to expand...
Click to collapse
If you want android only (wich i would), yes swap it.
done... galaxy is awesome..so beautiful...quiality samsung os + android
never ever getting a winmo phone again ..had 3.. all fiddley beyond belief...
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
king roro said:
hey guys ...
there is the whole story
My friend's HD2 device was working in strange way, When restarting it gives a white screen and the HTC logo and freeze at this screen and then after a large number of re-starting it works, but when re-restart it again it return to the white screen
After a Hard Rest through the sound buttons the top and bottom were formatted but the device remain standing at the white screen after a Hard
the only solution to me was upgrade to new Rom and after read in the forum that This problem can be a lack of Compatibility between the Rom and the radio, but I think that the device had not been updated b4 by a lack of awareness of my friend, and then check the SPL version ,it was 1.42.000 (still locked) then try to ulock it by HSPL2_RUN as posted in some thread
it done right and the message "we hacked .." and enter boot-loader and checked it became 1.42.spl then I tried to upgrade by the following Rom:
RUU_Leo_HTC_WWE_GCC_1.43.488.1_Radio_Sig ned_15.26.50.07U_2.04.50_22_2_Ship
When updating the device whenit reached 9% did not complete the upgrade untill the upgrade process stopped by itself so I did restart the black screen appeared within a triangle inside the exclamation point.
now I started to be panic, and then search the net and found the advice from someone to use Task29 before the upgrade and when I run the program worked fine and after restarting the white screen returned with the HTC logo inside
I tried again to upgrade the same Rom and returned the same result ,searching again and found many advise to upgrade the SPL to version 2.0 which is recommended by most members
After the successful conversion of the SPL took off the device and swithched to boot loader to make sure the validity of conversion and the back of the version then after restating the white screen appeared and when I tried to reboot again the device turned off, I tried several times and did not work I said maybe the battery and when i connect the charger it did not ship and the orange led did not spark, tried the USB method but same result
I tried another charger and a another usb cord and it did not work and I check the battery by an electronics specialist, He assured that the battery is fully charged.
And now the device does not function at all, not even shaking when running and screen or charging
please guys i need ur argent assistance ...even a thought may help
Note: This is not the first time for me unlocking and flashing thin , my last devices was: JAM - k-jam - Jazjam - Omnia (current)
Click to expand...
Click to collapse
Hi,
Since you have enough experience in flashing custom ROM, I would suggest you the following ways:
1. Make sure battery is at least 50% and the battery pins are not bent
2. Format your micro sd card to fat 32
3. Find and download the CORRECT STOCK ROM. You can download it from htc website if your hd2 is non branded, or you can download it from your carriers website if your hd2 is a branded one. Make sure the downloaded file is not corrupt due to download process
4. Extract the downloaded file using 7 zip or winrar. Find the file named: RUU_signed.nbh Then, rename it to: leoimg.nbh then copy it to the root directory of your micro sd card
5. Go into boot loader and follow the onscreen instruction. If therenis no hardware issue, it should work.
Good luck ...
thanks m8 but I've checked the pins and changed the battery with fully charged one ..
but it's no boot loader mode ... its completely off
thanks 4 ur support
Not offering solution, just an observation,,,, hanging at HTC screen and only occasionally booting, plus flashing hanging at. 9% is a bad sign, sometimes associated with a stuck radio, and/or/caused by thermal issues.
Try chilling the phone with stock nbh ready to go on SD card, in sealed bag in fridge/freezer for a while, then try to SD flash.
If flashing starts, (white screen blue writing) keep an eye out for "rsa radio fail" or similar.
if the flash goes well, but then later the problem returns, it's pretty conclusively hardware.
thanks buddy for the advise but as I mentioned b4 ...
the device doesn't boot anymore ... and yeah it's Hardware bug I think.
best regards