Related
I've been attempting to get the official 2.2 update however every time i go to the check new in the system update i get the message of server unavailable!!
Originaly my fascinate was rooted and flashed to 2.2 froyo leak , and when I heard that the official software was released I used oden install it to the official dj09 2.1 update 1 , now my phone is unrooted and unable to receive the update, would anyone know how can I get official 2.2?
Sent from my SCH-I500 using XDA App
Are you attempting to connect via wifi? I find I can only get official updates using Verizon's network.
I've tried with and without wifi with no success... any other suggestions?
Sent from my SCH-I500 using XDA App
forum.xda-developers.com/showthread.php?t=1044474
Sent from my SCH-I500 using XDA Premium App
I believe I would have to turn wi-fi off to initiate OTA updates on my DX. For kicks I would also toggle the other devices off and on prior to initializing the update. Bluetooth, gps.
I was running EB01 so I odin'd back to DI01 and DL09 but I got "server unavailable" messages when I would check for OTA updates. I've scoured the internet far and wide for a solution but I've had no luck. Can someone please chime in? I don't get why I would have this issue having odin'd back to stock and it is frustrating.
Im on that same boat I haven't found a solution, I read an old thread on a similar problem but when update 1 was releases that said that certain models can't get that update. .. I think MAYBE because we own these models?
Sent from my SCH-I500 using XDA App
abel_1one said:
Im on that same boat I haven't found a solution, I read an old thread on a similar problem but when update 1 was releases that said that certain models can't get that update. .. I think MAYBE because we own these models?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I'm not sure what you mean by certain models. I can tell you for sure that when I was running the stock eclair build on my Fascinate a few months ago I was able to check for and install OTA updates. I've literally tried almost everything and still get the SERVER UNAVAILABLE message and can't find any help on this on any forums. If you find a solution please do post back here and I will do the same. For now I just ODIN'd the ED01 zip here.
No one else gets a SERVER UNAVAILABLE when checking for OTA updates? I really suspect even though I ODIN'd the stock tarballs something must not be stock for the OTA updates to fail. Anyone, please??
I guess we need to wait for an Odin 2.2 file
abel_1one said:
I guess we need to wait for an Odin 2.2 file
Click to expand...
Click to collapse
You can Odin 2.1 and then flash the ED01 update.zip. That's what I ended up doing since no one responds to these server unavailable issues.
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1045753
It is not your exact problem but it does deal with a server problem.
If you can do either option it is worth a try.
MSHancock said:
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1045753
It is not your exact problem but it does deal with a server problem.
If you can do either option it is worth a try.
Click to expand...
Click to collapse
I'll check it out, appreciate the help!
phonefiend said:
I'll check it out, appreciate the help!
Click to expand...
Click to collapse
Let me know if it works for you.
MSHancock said:
Let me know if it works for you.
Click to expand...
Click to collapse
What do you know, it works!!! Thanks a lot man, I would never have looked in thread you pointed me to unless you directed me there.
phonefiend said:
What do you know, it works!!! Thanks a lot man, I would never have looked in thread you pointed me to unless you directed me there.
Click to expand...
Click to collapse
I'm glad that worked. I have to do the wifes now. Since she got the update the same thing is going on with her phone.
Can we take firmware update if rooted and s on?
Sent from my EVO using xda app-developers app
From what I've been told and understand, never ever take an update from the carrier. All the good stuff will be extracted and the bad left out with the next update of whatever ROM you are running... usually if not, find another ROM
Sent from my EVO using xda app-developers app
You will lose root. Never take a firmware update (from what I've read) Only update profile and prl.
treIII said:
Can we take firmware update if rooted and s on?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Are you able to go s-off? Sounds like you might be since you haven't taken any OTAs of course depending on when your got your phone too. If so then you should do it.
There are ways to upgrade your firmware without taking it via OTAs.
There are several threads in development that address your concerns.
Sent from my EVO using xda premium
Sorry if I ask a question on this post did not wanna make a new one anyways anyone having heat issues on the hboot that LazyPanda post on there Site 1.12.2222 when charging?
Sent from my EVO using xda premium
Firmware upgrade a must ?
Hi, I would love to try the MeanBean2.4 ROM, I understand that a firmware upgrade would be a must ? I'm on Viper4G2.0.2 ROM and if I do a firmware update I'm sure my Viper4g rom will not load or run correctly. Is there a way to reverse a firmware update ? Can I do it via my installed TWRP 2.3.3 ? Currently I have S-Off Lazy Panda, Hboot 1.12.111, Radio 1.02.12.0427.
I like the Viper4G ROM, but getting old, has minor issues, got Gogole now working on my Viper rom but can't update via Play Store..no big issues, but I would still like to have the option to go back to this ROM. I did a full backup (Sys,Data,Boot,Recovery,Cache) via TWRP. Would a restore fix any mess created by firmware attempt ? Could I even get to TWRP after firmware update or a botched update ?
Any input would be greatly appreciated
Regards,
Julian
CBRRider said:
From what I've been told and understand, never ever take an update from the carrier. All the good stuff will be extracted and the bad left out with the next update of whatever ROM you are running... usually if not, find another ROM
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
julianikos said:
Hi, I would love to try the MeanBean2.4 ROM, I understand that a firmware upgrade would be a must ? I'm on Viper4G2.0.2 ROM and if I do a firmware update I'm sure my Viper4g rom will not load or run correctly. Is there a way to reverse a firmware update ? Can I do it via my installed TWRP 2.3.3 ? Currently I have S-Off Lazy Panda, Hboot 1.12.111, Radio 1.02.12.0427.
I like the Viper4G ROM, but getting old, has minor issues, got Gogole now working on my Viper rom but can't update via Play Store..no big issues, but I would still like to have the option to go back to this ROM. I did a full backup (Sys,Data,Boot,Recovery,Cache) via TWRP. Would a restore fix any mess created by firmware attempt ? Could I even get to TWRP after firmware update or a botched update ?
Any input would be greatly appreciated
Regards,
Julian
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2045935 choose the first file under Firmware Downloads/rename PJ75IMG / put it on your ext sdcard / boot into bootloader / it should ask you if you want to upgrade / when it's done and you are rebooted delete the file from your sdcard
Going back to old Firmware possible ?
Thank you for that info, I did find one firm just a bit newer PJ75IMG_3.15.651.6-no-boot-recovery.zip and I do know how to install. I do not expect an answer on my question if I can still run Viper4G2.0.2 after this upgrade (will ask Team Venom), however, would you know if I can revert back to the old Firmware ? Via TWRP or other method ? I hear renamig the old PJ75IMG.old that I left on the phone to PJ75IMG.zip and installing it to try to get old firmware is a bad idea and possible brick road ! lol
Thanks again,
Julian
bigdaddy619 said:
http://forum.xda-developers.com/showthread.php?t=2045935 choose the first file under Firmware Downloads/rename PJ75IMG / put it on your ext sdcard / boot into bootloader / it should ask you if you want to upgrade / when it's done and you are rebooted delete the file from your sdcard
Click to expand...
Click to collapse
julianikos said:
Thank you for that info, I did find one firm just a bit newer PJ75IMG_3.15.651.6-no-boot-recovery.zip and I do know how to install. I do not expect an answer on my question if I can still run Viper4G2.0.2 after this upgrade (will ask Team Venom), however, would you know if I can revert back to the old Firmware ? Via TWRP or other method ? I hear renamig the old PJ75IMG.old that I left on the phone to PJ75IMG.zip and installing it to try to get old firmware is a bad idea and possible brick road ! lol
Thanks again,
Julian
Click to expand...
Click to collapse
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Going for it...
Well I think I'm going to try now, I still hope that by saving my original firmware file on my SD and then run TWRP Restore will get me back...or not ! lol Worse case I'll say goodbye to the Viper Rom... God help me, I love my EVO..ha haa
bigdaddy619 said:
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Click to expand...
Click to collapse
Sweet !
Huge thanks ! No problem with update, loaded Viper4g ICS fine, tested functions..working !
Again...thanks for the help !
bigdaddy619 said:
Reverting your firmware will indeed brick you AFAIK and you should be able to run Viper4G with the new firmware when I updated my firmware I was running an ICS rom I didn't notice any problems.
Click to expand...
Click to collapse
julianikos said:
Huge thanks ! No problem with update, loaded Viper4g ICS fine, tested functions..working !
Again...thanks for the help !
Click to expand...
Click to collapse
Your first screenie shows you are still on the older radio. You didn't do the update?
Old Radio
It used to be like this before the update. I used the link you gave me and did the PJ75IMG.zip update.
bigdaddy619 said:
Your first screenie shows you are still on the older radio. You didn't do the update?
Click to expand...
Click to collapse
julianikos said:
It used to be like this before the update. I used the link you gave me and did the PJ75IMG.zip update.
Click to expand...
Click to collapse
It appears you flashed the older PJ75IMG.zip your baseband should be 1119 as the last 4 numbers
Sent from my PoS MoPho
Wrong image
founf a link to Jewel_Radio_1.12.11.1119.zip file. Tried to flash, said wrong image. Am pretty sure was for Evo LTE. Do you have a link by anychance ?
Tx,
JK
bigdaddy619 said:
It appears you flashed the older PJ75IMG.zip your baseband should be 1119 as the last 4 numbers
Sent from my PoS MoPho
Click to expand...
Click to collapse
julianikos said:
founf a link to Jewel_Radio_1.12.11.1119.zip file. Tried to flash, said wrong image. Am pretty sure was for Evo LTE. Do you have a link by anychance ?
Tx,
JK
Click to expand...
Click to collapse
Check your PM
Worked
Thanks so much for your quick responses. Your link in my PM worked great ! Very nice of you to take time for us noobs. I've been at it since my original EVO 4G. Trying to learn each day, this stuff just moves pretty fast and hard to weed out the good and the bad posts. Really cool to get a nice direct and good advice.
Huge Thanks again,
JK
bigdaddy619 said:
Check your PM
Click to expand...
Click to collapse
julianikos said:
Thanks so much for your quick responses. Your link in my PM worked great ! Very nice of you to take time for us noobs. I've been at it since my original EVO 4G. Trying to learn each day, this stuff just moves pretty fast and hard to weed out the good and the bad posts. Really cool to get a nice direct and good advice.
Huge Thanks again,
JK
Click to expand...
Click to collapse
Congrats and you are very welcome
Just checked ATT Software Up-date on my Note...
Downloading a 36.58 MB up-date right now...
Im on stock CLF6... More later...
++ auto rebooted after D/L.... it went to TWRP..
I chose re-boot system...
++ Install interrupted..... could not install at this time...hmmmmm
I need to get rid of TWRP and do the up-grade check again...
Anyone know how to un-install TWRP?? thanks...
jimmbomb said:
Just checked ATT Software Up-date on my Note...
Downloading a 36.58 MB up-date right now...
Im on stock CLF6... More later...
++ auto rebooted after D/L.... it went to TWRP..
I chose re-boot system...
++ Install interrupted..... could not install at this time...hmmmmm
I need to get rid of TWRP and do the up-grade check again...
Anyone know how to un-install TWRP?? thanks...
Click to expand...
Click to collapse
Use Odin to flash the stock ROM image... It should restore stock recovery and everything
Dont worry, its not jb.
The only thing this update does is gives us keytones in the dialer again as far as i can see definitively.
It also reinstalls 11 bloat apps, att barcode scanner, facebook, and att family are 3 that i recall.
These all can be uninstalled easily by going to the playstore and conveniently, the 11 apps all need to be updated, or, if you prefer, do what i did and just unistall them.
Another app called Movies gets reinstalled, you can just uninstall it as well.
Two other possible changes that i cannot confirm because they might just be me, i havent benchmarked these...
The screen appears to be a tad darker when autobrightness is enabled.
The phone also appears to be slightly less sluggsih.
---------- Post added at 02:57 AM ---------- Previous post was at 02:18 AM ----------
Two more small things my ram usage has decreased by about 50 mb on a fresh boot and it looks like there might be a small battery life improvement...
This update from AT&T increases the Baseband Version to: I717UCMB4
It also increases the Build Number to: IMM76D.UCMB4
No change in Android Version or Kernel Version.
Though not Jelly Bean an update to the Baseband Version is always welcome.
I seem to have a better LTE connection since the update, usually at my home LTE is weak and intermittent, I usually switch back and forth between 4G and LTE and this morning I am solidly on LTE.
Can someone post the full updated ROM here so I can flash it via Odin or cwm? Thanks in advance.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
lildoggs said:
Can someone post the full updated ROM here so I can flash it via Odin or cwm? Thanks in advance.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Or maybe a CWM flashable version of the update alone. Running deodexed UCLF6 with TWRP so it would not let me update.
TIA!
REQUEST: Please, can someone extract just the ucmb4 modem so I can flash it? Thanks in advance.
kimtyson said:
REQUEST: Please, can someone extract just the ucmb4 modem so I can flash it? Thanks in advance.
Click to expand...
Click to collapse
+1
scariola said:
+1
Click to expand...
Click to collapse
Yeah, I did search for it but no good so far.
Well, I got mine finally...
Did re-flash UCLF6 with Odin... wipe everything..
Got stock recovery back,, and this time the update went thru..
UCMB4 now. thanks for the tip on removing TWRP
Would you mind posting the uclf6 link for Odin ??
Other users may want to use your method as well.
Thank you ....g
+1 as well for modem
Does the new modem seem to make any difference?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
gregsarg said:
Would you mind posting the uclf6 link for Odin ??
Other users may want to use your method as well.
Thank you ....g
Click to expand...
Click to collapse
Sure... Got to wait till I get home..
Can someone post a link to the update? I've been trying to update it via the att servers but It just tells me my software is up to date.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I was able to restore to stock UCLF6 using this method;
http://forum.xda-developers.com/showthread.php?t=1731654
It will wipe your data and internal SD, but put you back to stock UCLF6. Now I just need to wait for the update. When I check is says I'm up to date.
Same here.... it says I'm up to date..which is obviously not the case.
An update .zip would be nice, to get around all the failed update attempts...
Those who have managed to get the update loaded, are reporting a much improved LTE connection using the new baseband, and I have no doubt that the update contains new APN's and RIL's to go with the new baseband image....g
gregsarg said:
Same here.... it says I'm up to date..which is obviously not the case.
An update .zip would be nice, to get around all the failed update attempts...
Those who have managed to get the update loaded, are reporting a much improved LTE connection using the new baseband, and I have no doubt that the update contains new APN's and RIL's to go with the new baseband image....g
Click to expand...
Click to collapse
I got the update over the weekend. If someone can walk me through how to get it off my phone, I will happily post it here.
gregsarg said:
Same here.... it says I'm up to date..which is obviously not the case.
An update .zip would be nice, to get around all the failed update attempts...
Those who have managed to get the update loaded, are reporting a much improved LTE connection using the new baseband, and I have no doubt that the update contains new APN's and RIL's to go with the new baseband image....g
Click to expand...
Click to collapse
Just went into date and time settings, deselected auto date and time and auto time zone, manually set the date to 3/23, checked for updates and there it was. Successfully updated to UCMB4. Also noticed the ability to disable bloat apps. Don't remember having that feature before, not sure, but it's great to disable unwanted apps!
rsfinsrq said:
Just went into date and time settings, deselected auto date and time and auto time zone, manually set the date to 3/23, checked for updates and there it was. Successfully updated to UCMB4. Also noticed the ability to disable bloat apps. Don't remember having that feature before, not sure, but it's great to disable unwanted apps!
Click to expand...
Click to collapse
where is the ability to disable apps? Thanks,
I OTA updated to vramc3 pretty much while rooted on accident.. Spent like 10 hours searching through forums and eventually found a way to fix it.. Anyway since i cant just use the stock vramc3 at present... I started looking for alternatives but can I flash like Beans Build 17 while having vrall4? Probably a stupid question but I don't know so.. Thanks in advance!
I don't see why not. The ROMs and modems are not linked per say.
Sent from my SCH-I605 using xda premium
droidx2.3.3 said:
I don't see why not. The ROMs and modems are not linked per say.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Well.... I just tried flashing Beans Build 17 twice and both times i got a red message that said "Failed"
so either im forgetting a step somewhere or it just aint working xD
P.S. But at least its working at the moment.. I can live with that until I can update to VRAMC3 but im not sure how that's gonna work out...
Any information would be great but its 5 am... I aint slept yet so im gonna go ahead and do that haha
Yes you can flash ROMs and then you can flash the radio to update the baseband to the newest version.
Comfy95 said:
Well.... I just tried flashing Beans Build 17 twice and both times i got a red message that said "Failed"
so either im forgetting a step somewhere or it just aint working xD
P.S. But at least its working at the moment.. I can live with that until I can update to VRAMC3 but im not sure how that's gonna work out...
Any information would be great but its 5 am... I aint slept yet so im gonna go ahead and do that haha
Click to expand...
Click to collapse
I assume you are unlocked with twrp installed. If so update it using goomanager.
Sent from my SGH-T889 using xda app-developers app
As long as u update twrp like kint said you can flash beans on the ll4 radios with no problem or just download updated radios and flash behind beans 17 doesn't matter what radios your on. But u should go into goo manager hit menu then click install recovery script to update twrp .
kintwofan said:
I assume you are unlocked with twrp installed. If so update it using goomanager.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
highwaybandit said:
As long as u update twrp like kint said you can flash beans on the ll4 radios with no problem or just download updated radios and flash behind beans 17 doesn't matter what radios your on. But u should go into goo manager hit menu then click install recovery script to update twrp .
Click to expand...
Click to collapse
Oooh ok I'll do just that! I'll keep you posted when it finishes!
Oh jesus sorry im getting back to you guys so late... I've had one hell of a day.. but I tried flashing Beans Build 17 again after updating TWRP and it failed...
...I then saw Carbon ROM... thought it looked cool and gave it a try... it sure did flash but jesus something went completely awry with it... more than half the apps were force closing and i had to pull the battery multiple times before the phone would actually boot so i gave up on that then i went back and used odin to recover vraljb... phew.. at least i can fix most soft bricks now XD!
Comfy95 said:
Oh jesus sorry im getting back to you guys so late... I've had one hell of a day.. but I tried flashing Beans Build 17 again after updating TWRP and it failed...
Click to expand...
Click to collapse
Make sure to check md5 sum after downloading the file. I've never had a problem with flashing any build of beans. When you try to flash it, does it even get to the aroma installer?
Nope not even... I swipe to flash then it tries for a second and just fails
Sent from my SCH-I605 using xda app-developers app
Comfy95 said:
Nope not even... I swipe to flash then it tries for a second and just fails
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Use a md5 sum checker on the file
BoostedB18C said:
Use a md5 sum checker on the file
Click to expand...
Click to collapse
I certainly will try... as soon as I can re-root...
I have been seeing a lot of folks talking about just going back to complete stock to install the update.
Is that the best option? Are we able to root 4.3 yet?
Do you need to reset S-off on the phone or what? I have seen a few different things out there today talking about this. My phone downloaded the update and keeps asking me to install ever so often but of course won't as I don't have the stock recovery console.
All help and info is appreciated!
I'm using Avatar ROM and my phone isn't even prompting me with the update. I'm really happy with my phone now so I'll give it a few days and wait for feedback on it.
Sent from my SGH-T889 using xda app-developers app
Kay Rich said:
I'm using Avatar ROM and my phone isn't even prompting me with the update. I'm really happy with my phone now so I'll give it a few days and wait for feedback on it.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I have just been using stock rooted as I have needed to keep my wifi calling.
I am used to Samsung's and Moto's and this is my first HTC I have worked with so the process of doing everything is a bit different.
Is there a way I can just flash stock recovery back and then install the update and be good to go?
chisledice said:
I have been seeing a lot of folks talking about just going back to complete stock to install the update.
Is that the best option? Are we able to root 4.3 yet?
Do you need to reset S-off on the phone or what? I have seen a few different things out there today talking about this. My phone downloaded the update and keeps asking me to install ever so often but of course won't as I don't have the stock recovery console.
All help and info is appreciated!
Click to expand...
Click to collapse
You can leave s-off but you need to go back to stock Rom and recovery to receive ota. I have a link posted a link in the ota is coming thread that will help you return to stock. If you updated firmware you just need to use a usb otg and a usb mouse cause touchscreen won't work
Sent from my HTC One using Tapatalk