I was searching around and could not find a gel/TPU type clear case for the G1...for those of you who do not know...here is one example of a Nexus One case like what I would want:
http://cgi.ebay.com/2-Soft-Case-TPU...t=LH_DefaultDomain_0&var=&hash=item746a91e417
I know they do not show a completely clear one, but that is the material/type of case I would like. It is not like a typical silicone case -it is slightly like a hard case being that it does not bend as easily and it is not floppy at all.
Any ideas?
Heres the problem that I see...
How would you open the keyboard with that cover overlapping the front of the phone? That would probably be the reason those style covers don't exist for the G1.
As my fellow Oregonian said.. Soft cases and a slide keyboard won't really work.. If you look at the hard shells you'll see how the screen has it's own little part that clips on.. soft shells wrap instead of clip on...
I fail to see why they could not have a separate piece to put on the screen...?
If there is no such case... then could someone recommend a thin, yet tough, hard case? (preferably clear)
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Kemekill Products said:
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Click to expand...
Click to collapse
Yeah I understand what you mean and thanks for that info...but - I was thinking not of a soft case 'clipping' onto the screen but you could slip a cover over it or around it -I am SURE there is some way to do it....
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
SolemnWishing said:
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
Click to expand...
Click to collapse
LOL WOW THANK YOU!!!! How did you find that ? it should not be labeled as silicone (I think)..... wow that is exactly what I am looking for! I knew it was possible.... any way - I wish it didnt cost so much, the others I see like it(on other phones) is significantly cheaper (like under $5.00 with shipping included).... If I cannot find any cheaper ones I will order that one...
Thanks again, I cant believe you found just what I was looking for...
SolemnWishing said:
I think this is what you are looking for:
QUOTE]
Thank you as well. Been looking for one just like that.
Click to expand...
Click to collapse
yea that case is rocking . I as well was looking for something like this! Thanks!! hey erebusting did you order it? did ya like it?
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
erebusting said:
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
Click to expand...
Click to collapse
LMAO...Reading this was funny for some reason
Can you post some pictures? And would you recommend it? I am looking for a new case for my phone, and this one is one that I am considering
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
zinite said:
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
Click to expand...
Click to collapse
zinite, I understand that, but see I do also have a screen protector on but the section of the case which goes on the screen is fitting fine, the section for the body is the part I have the complaint about. I will definately check out some Seidio cases now that you have mentioned that.
SolemnWishing, Here are some pictures of the case next to a clear hard case (which is actually clear and not yellow...)
Ace42, glad you got a laugh! haha...BTW I am wondering why you were laughing though, kind of odd to me ATM...
WOW! that case is really yellow. i was thinking about getting one thinking it wont be that yellow. but that is definitely gross smoker yellow
Dang... it looks like someone left that out in the sun for like a year or something..
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
mattv888 said:
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
Click to expand...
Click to collapse
I also love the feelings of the G1 without a case, but I have dropped my previous phones too many times to take that chance... haha
Any ways... Those pictures are from the same day of receiving that case, so it must be some fault on the seller....
its really a disappointment since there are no other cases (that I can find that is) like that for the G1...
any other recommendations/ideas?
Related
HI Everyone,
Ive tried a leather case - didint like it as you have to flip open flaps to access it and makes phone calls akward.
Ive tried an alloy case - you have to open it to use it and use the keyboard
Silicon Case - bad experience using these because I used one on my old Nokia N73 and it still dented the housing when it was dropped.
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen. I know the screen wont be protected but a screen protector will do the job of preventing scratches. Also, a swivel belt clip screw mount on the back will be nice too,
I know there are some for the Wizard, but I havent seen any for the Hermes yet. This case will be ideal as you get all the access to the device and you dont hide the beauty of it behind leather and alloy like in other cases.
Any help will be appreciated
jasjamming said:
Now, does anyone know where to get a crystal clear plastic hard case that has 2 parts, one to cover the front and one to cover the back whicl still getting access to the screen.
Click to expand...
Click to collapse
Don't want to be the bearer of bad news, but I just had a look on eBay and there aren't any listed there. I would have thought that if anybody was manufacturing such a case that they would be available on FleaBay.
I posted an almost identical post requiring the same thing not so long ago- no repsonses as of yet!
These are widely available for many other 'slider' phones but not yet for our one.
Ive sent two request to Boxwave. Their response is need more request.
I have been looking for a Crystal Case before I even got my 8525. I love this type of case. Sadly though it doesn't exist yet.
If you guys gohere and request an Active Case maybe we will have one soon. Note you must select Active Case because the web page loads with a check mark next to the ClearTouch Anti-Glare and that's not the same.
yep, i put in a request.
this type of case will be ideal as it will show the sleek lines of the tytn/jasjam, protect it, and allow keyboard access without unclipping anything.
what could be simpler....?
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
shigeo said:
i think the best bet is going to be check with boxwave to see when they get it, i personally did not like the crystal clear on my 8125 it just felt wrong i gave it to one of my coworkers
Click to expand...
Click to collapse
What felt so wrong about it?
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
I don't bite
Alik4041 said:
I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened.
Click to expand...
Click to collapse
It was 2000 the first time I experienced that. It was a palm m500 and a little piece of dust got on the tip of my stylus. I didn't hear it so much as I felt the friction, but my reaction was much the same. I haven't gone without a screen protector since.
As to the included screen protector, use it if it works for you, but you'll typically find better durability in popular protectors like the boxwaves you linked to or clarivues. The clarivue that I put on my Palm TX in 2005 is still on it, and still looks good.
The thing I worry about with a lot of those no name brand cases on ebay is how well do they really fit? The last thing you want is to have them falling off. I don't know if my fear is well-founded or not, but I didn't really want to gamble on it. But as far as TMo goes, I'm not sure what to tell you. Boxwave actually has a pretty cool soft case called the praetorian crystal slip, but not for the TMo version. Seidio seems like a nice quality joint, but they don't seem to make their innocase for the TMo version either.
Edit: I suppose you could check this thread out.
I had the acrylic case with screen protector and I removed it shortly after purchasing. The porblem I had is that the screen protector is superficial and although it works sometimes when I typed certain virtual keys another part of the screen protector would also bend down on my press and caused for a different near by character to be pressed. Eventually I got rid of it and just purchased a seperate screen protector.
I really am looking for quality though for a case, just want something that's not too big or will not hinder usage of the phone. I've heard a lot about the ghost armoring and all. I'm considering it, but that will not save a phone from a fall or anything like that.
Consider an all-body protector (such as zagg or bodyguardz), combined with a pouch or holster case that you remove the device from to use it.
This is my preferred method, so my TP2 is well protected when it's not in use, and I'm completely unhindered when I am using it (but still with scratch protection).
Note that the protectors need to be applied very slowly and carefully to make sure they're lined up well and properly stuck down around the edges.
Alik4041 said:
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
Click to expand...
Click to collapse
I have the same clear hard plastic case and absolutely love it. I've tried the body glove case, and had some issues with sliding the keyboard in and out. I just use the screen protector that came with the phone, and the clear hard plastic case. No problems at all, though I still have to take the case off every once in a while to clean it, but you'd have to do that with any case really. Get a lot of compliments on it.
dougstoner said:
I have the same clear hard plastic case and absolutely love it...
Click to expand...
Click to collapse
Does it add much bulk...???
da9th_one said:
Does it add much bulk...???
Click to expand...
Click to collapse
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
dougstoner said:
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
Click to expand...
Click to collapse
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
I just ordered some phantom skinz, I'll report back when they get here.
liht said:
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
Click to expand...
Click to collapse
I think it fits better than the body glove case. Plus, it looks way better. I've had mine for a while now with no problems. Even take it off a bit to clean it up, and no issues. Check my old thread out...Have pics on post #5.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
just got it ，nice case
hard case
http://www.ebay.co.uk/itm/150754846...46512&_sacat=See-All-Categories&_fvi=1&_rdc=1
stand hard case
http://www.ebay.co.uk/itm/150717836...36523&_sacat=See-All-Categories&_fvi=1&_rdc=1
kpjimmy said:
The case is like the barely there cases with a slide out kickstand built in.
Putting on the case was like putting on the barely there case. Taking it off is the same. Now using the kickstand....well....it's a hit or miss. You can't really use it in portrait, and I am not sure it's supposed to be used that way. That's because the bottom is exposed so the curve of the phone makes it rock back and forth slightly. Now the beauty of this is the portrait mode. This works the best and most stable.
Click to expand...
Click to collapse
i will post more stand case pics
don't like the fact that the top and bottom of the phone isn't covered by the hard case.. but it does look quite nice.
the stand case looks almost exactly as one that is available from Verizon w/ a holster. I am using this myself and only because of the stand - i don't mind that the top and bottom are exposed as I'm not really expecting to use the case for protection.
I like the case, how skinny is the case? Does it add much bulk? I like the fact that the top is not covered so I can dock the phone.
the stand hard case is really beatiful AND usefull... a precious things, could you make a little review on youtube ? i like to see it if stay in place well in landscape (i bet in portrait if you plug the cable on top the razr tip).
ATTENTION：barely hard case bit difficult press power button
pics will explain to you,so I recommend stand hard case
left Barely Stand hard case
right Barely hard case
M4zinkaiser said:
the stand hard case is really beatiful AND usefull... a precious things, could you make a little review on youtube ? i like to see it if stay in place well in landscape (i bet in portrait if you plug the cable on top the razr tip).
Click to expand...
Click to collapse
pics available now，pics better than thousand words
hisuperman said:
ATTENTION：barely hard case bit difficult press power button
pics will explain to you,so I recommend stand hard case
left Barely Stand hard case
right Barely hard case
Click to expand...
Click to collapse
yeah noticed this as well, had to get a razor blade and cut the plastic off which helps alot
Got mine today.. perfect case not usin holster
Sent from my DROID RAZR using XDA Premium App
nice,thanks
just ordered the Stand Hard Case
thanks you nice
I wonder if the materials used for the case are cheap...Of course they are not comparable to kevlar, but are they premium enough to keep the sexy look of the phone?
p_vhd said:
I wonder if the materials used for the case are cheap...Of course they are not comparable to kevlar, but are they premium enough to keep the sexy look of the phone?
Click to expand...
Click to collapse
this one you may looking for http://www.ebay.co.uk/itm/150705998...egories&_fvi=1&_rdc=1&clk_rvr_id=303553692937
thin and nice
I'm just utterly perplexed why manufacturers make cases for this phone with the SIM cutout.
How often during the day do you need to access your SIM and memory card? In my opinion, they just destroy the aesthetic design of the case.
People may say convenience, but in that theory, all other phone's cases should have cutouts on the back.
It makes me completely pass over a case if it has that cutout. Besides my grievances listed above, it's also another spot for a chip or scratch.
Just stupid in my opinion.
Sent from my DROID RAZR using Tapatalk
I completely agree with you, but the stand case doesn't have the cut out - one of the few that doesn't
just got mine in the mail today damn nice. touch exterior and the finish is great! even the ultra capsule sgp cases have some molding material hanging on the edges.
I have the same case as OP. And yes, Verizon sells it. I love it! I had the same exact case/holster for my incredible. It suits my needs perfectly. Recommended!
Sent from my DROID RAZR using XDA App
A word of caution:
I've been using a red Nillkin Hard case for a couple of days now and when I removed it there were a couple of red "stains" on the kevlar back. I've tried getting them off with detergent and even rubbing alcohol but they wont even fade. They're really not that bad but it looks a bit like a spilled ketchup and let it dry and it's bugging the hell out of me!
hisuperman said:
pics available now，pics better than thousand words
Click to expand...
Click to collapse
whoa, i missed this post. nice, so you still have your sgs2 too, eh
btw, i used nillkin standing hard case on sgs2, but that one has smooth polished slippery surface i can barely hold with my sweaty hands. this one looks much better, not so slippery i guess.. :kewl:
I've been Googling, eBaying, and Amazoning (last fictional verb sounds kinda cool) for a common, flat case for my Tab 2 7.0.
It has become my number one remote control, so you can probably understand how uncomfortable a flip case is, adding an extra step every time I want to change a channel, or having a cover hanging (why in the world are 95% of the cases are now "folio"?!). Also, most cases either block the IR transmitter entirely, have some part obstructing it partially, making it mandatory to aim with "the" angle towards my TV set.
I have found a few silicon cases on eBay, but they have an S line, or weird X across the whole thing, that just make the device look fugly to me. No offense if someone likes it or has it, as we know, everyone has different taste.
I'd like to just get a regular, non-flip, non-folio, non-X-or-any-character-of-the-alphabet-drawn, plain cover, that protects the rear of my device, and doesn't obstruct the IR blaster at all. How hard can it be? The perfect fit for me would be a flat, matte black rubber thingy, with a hole where the blaster is... so simple, and inexistent! Maybe even better, a hard case.
Anyone found something, somewhere?
OtterBox
Samsung Galaxy Tab 2 7.0 Defender Series Case
I've looked but haven't found any.
I tried out the S curve case that was made for the GTab Plus and it fit horribly. It's too bad that the Gtab 2 isn't popular enough to have more cases. I was hoping for a Cruzerlite case, but I don't think it's gonna happen.
bark777 said:
OtterBox
Samsung Galaxy Tab 2 7.0 Defender Series Case
Click to expand...
Click to collapse
Yeah, I've seen it. I'm not sure it fits the "simple, flat" criteria, although I think I'd buy it if it didn't cost 1/3 of what my tablet did
I agree that Otterbox is pricey. I also hate the frame around the screen on the front.
Why not just get one of these cheap tpu style cases and just cut the tabs off that hold the cover?
Http://www.ebay.com/sch/i.html?_nkw...+case+flip+cover+tab+2+7&_osacat=0&_from=R405
Http://dx-box.com/book-cover-faceplate-for-samsung-galaxy-tab-2-p3100-7-case.html
gooffeyguy said:
I agree that Otterbox is pricey. I also hate the frame around the screen on the front.
Why not just get one of these cheap tpu style cases and just cut the tabs off that hold the cover?
Http://www.ebay.com/sch/i.html?_nkw...+case+flip+cover+tab+2+7&_osacat=0&_from=R405
Http://dx-box.com/book-cover-faceplate-for-samsung-galaxy-tab-2-p3100-7-case.html
Click to expand...
Click to collapse
That's exactly what I planned on doing if I couldn't find anything... get rid of the cover, and/or punch a hole for the IR sensor on the ones that are designed for P3100.
What about this one...
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Says "P3100", but there's a 7.0 Plus in the pictures... who knows!
Got one, and it fits perfect! I'll post some pictures tomorrow.
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Try the Capdase silicone case for Tab 7.0 plus. Although mine is the folio type, (silicone case with IR blaster slot + leather folio) their plain silicone (w/o the leather case) seems exactly what you're looking for. Just plain flat black silicone, no x or s or whatever. just plain flat.
Ivan Fuentes Hagar said:
I've been Googling, eBaying, and Amazoning (last fictional verb sounds kinda cool) for a common, flat case for my Tab 2 7.0.
It has become my number one remote control, so you can probably understand how uncomfortable a flip case is, adding an extra step every time I want to change a channel, or having a cover hanging (why in the world are 95% of the cases are now "folio"?!). Also, most cases either block the IR transmitter entirely, have some part obstructing it partially, making it mandatory to aim with "the" angle towards my TV set.
I have found a few silicon cases on eBay, but they have an S line, or weird X across the whole thing, that just make the device look fugly to me. No offense if someone likes it or has it, as we know, everyone has different taste.
I'd like to just get a regular, non-flip, non-folio, non-X-or-any-character-of-the-alphabet-drawn, plain cover, that protects the rear of my device, and doesn't obstruct the IR blaster at all. How hard can it be? The perfect fit for me would be a flat, matte black rubber thingy, with a hole where the blaster is... so simple, and inexistent! Maybe even better, a hard case.
Anyone found something, somewhere?
Click to expand...
Click to collapse
Ivan Fuentes Hagar said:
Got one, and it fits perfect! I'll post some pictures tomorrow.
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Click to expand...
Click to collapse
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Ivan Fuentes Hagar said:
....
PS: Anyone has tried matte/antiglare screen protectors? Been thinking about one, but not really convinced.
Click to expand...
Click to collapse
I prefer the matte over the clear screen protector. The clear one gets sticky at times, the matte is always smooth and you don't have to worry about hairline scratches and reflections in your screen.
rsage said:
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Click to expand...
Click to collapse
Sorry I haven't taken the pictures! Yes, there is a little space.
MonJovi said:
I prefer the matte over the clear screen protector. The clear one gets sticky at times, the matte is always smooth and you don't have to worry about hairline scratches and reflections in your screen.
Click to expand...
Click to collapse
I hadn't thought of that, you're right. What about color loss?
Ivan Fuentes Hagar said:
...I hadn't thought of that, you're right. What about color loss?
Click to expand...
Click to collapse
Well that's a little compromise. Color is not as sharp and bright as the clear one but not by a big margin.
MonJovi said:
Well that's a little compromise. Color is not as sharp and bright as the clear one but not by a big margin.
Click to expand...
Click to collapse
I guess it's worth a try. I'll get a matte screen cover and see how it goes. Good input, thanks!
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
This is the general look of it:
rsage said:
Do the corners of that case create a bit of a bevel/lip where they clamp on the tab? In other words, when you put the tab face down on a desk/table, is there a space between the screen and desk/table or is it flush?
Click to expand...
Click to collapse
Hope this one answers your question!
Profile. Love the way it looks. Really cool match for the tab's back color.
Opposite angle.
Ivan Fuentes Hagar said:
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
Click to expand...
Click to collapse
That is exactly what I've been looking for...Thanx for the great pics...looks great...
Oh yeah...I placed my order for it because of ur pics...LOL...
Sent from my GT-P3110 using xda app-developers app
Ivan Fuentes Hagar said:
I guess it's worth a try. I'll get a matte screen cover and see how it goes. Good input, thanks!
Now, the long overdue pictures . Since the back surface is mostly flat (that was the idea), I concentrated mostly on showing how it fits the tablet. My apologies for the narrow depth of field... unfortunately I didn't have my tripod's plate with me, so I had to take the pictures handheld, and the only way to get a steady shot was with a large aperture.
This is the general look of it:
Hope this one answers your question!
Profile. Love the way it looks. Really cool match for the tab's back color.
Opposite angle.
Click to expand...
Click to collapse
Were did you purchase this case from?
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Sent from my Nexus 4 using xda app-developers app
ls1xtreme said:
http://dx-box.com/rock-ultra-thin-nakedshell-faceplate-for-samsung-galaxy-tab-2-p3100-7.html
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
i bought today, hope its fast delivery
htcuser69 said:
i bought today, hope its fast delivery
Click to expand...
Click to collapse
Dealextreme tends to be somewhat slow compared to individual sellers from Ebay, I believe this is because DX is the "middleman" liasing between customers who place orders and the suppliers who advertise their products whereas on Ebay, the sellers are the suppliers who respond directly to customer orders.