Important: Uninstall previous versions and DELETE any map previously downloaded with Litetrack, they're not compatible with v0.7.
Saved tracks and POIs are still compatible.
what's new in 0.7 version:
- No more tiles' limit in map's download.
- Map is saved as a single file, to save space in your SD
- User's location added to Track viewer, to walkback even without map
- New scrolling system
- Bugs fixed, all regional settings (should be) supported
- Mobile Cells localization and caching
About Cells localization: even without GPS you will have an idea about your location. This feature can be enabled or disabled from settings. How it works: any new phone cell encountered is added to the app database; if online, also cell's location is obtained and added to database. (*)Cells' locations can even be added later (menu -> tools -> Update). Once the cells are registered with their locations can be used offline also.
* This means you'll be free to go around and around staying offline, LiteTrack still collects info about phone cells encountered (but don't forget to enable it from settings). Once at home, turn online and update the database, all the cells previously collected are now ready to be displayed on the map and used offline. In other words, you will have your personal database of mobile cells!
-------------------------
LiteTrack is the right tool to record your route, save off-road paths, retrace a journey, obtain detailed gps data, or simply get your position on the map. All staying offline!
UI attractive, finger friendly, real full-screen usage.
Features (what you can do with LiteTrack):
- Display your position on the map
- Download maps from OpenStreetMap sources directly to your device
- Track your routes, also off-road, and save them to files
- Obtain track's statistics, also in realtime
- Append new tracks to existing track files
- View tracks in a separate context (Track Viewer)
- Export tracks to GPX and KML
- Save your current position as a new POI
- Attach comment and picture to your POIs
- Import tracks and POIs on the selected map
- Get detailed GPS info (lon, lat, alt, speed, heading, DOP, hDOP, vDOP and more)
- Display charts about satellites detected
- Obtain specific data about each satellite (id, azimuth, elevation, signal strength)
- Gadgets feature: get weather forecast, compass, clock and system monitor
- Mobile Cells localization and caching
Requirements: WM 5, 6, 6.1 or 6.5, touchscreen with VGA or WVGA resolution (640x480 or higher), .NET CF 3.5
Hope you enjoy all the new stuff!
If you like this app please consider to
eur, or
usd, the amount you prefer. Thank you!
Thanks!
was looking for one, thanks
Hello Xdaid,
Unfortunately I'm not able to use this jewel on my HD2 for several raisons:
- the zoom level is limited (only one level) therefore to select the area for downloading the map is impossible; the range selected is too wide, therefore I've a message "out of the range" or "latitude S cannot be lower than latitude N" even if I change it manually
I've tried to select area from top left to bottom right or vis versa but same result.
I really need this kind of soft for off-road tracks in the beautiful desert of UAE
Can you help on this issue?
Thanks and regards,
Renaud
Neat! Will Try!
Will give this piece of software a work out, meanwhile is it capable of GSM triangulation? If not is it coming anytime soon?
very nice idea but it doesn't work on htchd2.
No luck with Omnia2 i920 version.
GPS "on" leads to "error page" ,press details program shuts down.
I tried soft reset.
Started "Bing" first to get GPS working. no luck
soft reset no "Bing",no luck.
Looks like a nice and easy to use program.
Thanks for the efforts.
It is working with TP2.
WM 6.5.3
To Romeo Fox
Consider that
1) max size is 1000 tiles per map, in respect of OpenStreetMap rules.
2) at first launch of LiteTrack you have a global map, not detailed at all.
Well, to get detailed maps of towns and small areas follow these steps:
1) take an area from default map (e.g. your country or state) and download.
2) open the map just downloaded, select the area you're interested and download again. You will have more zoom options now.
Hope this help.
To HD2 users
I'm getting opposite feedbacks, there are hd2 users saying it works, and other saying it doesn't. I'll try to find the point and solve any issue.
Looks great xdaid. Thanks!
Hello xdaid,
bad luck for me. whatever i select as area (trying france for exemple) i've got error message on preview selection.
Anyway, i will follow your news as this soft is exactly what i'm looking for since longtime
Congrats for job done so far.
Renaud
Ps: official rom 1.66 on hd2
Romeo Fox said:
Hello xdaid,
bad luck for me. whatever i select as area (trying france for exemple) i've got error message on preview selection.
Anyway, i will follow your news as this soft is exactly what i'm looking for since longtime
Congrats for job done so far.
Renaud
Ps: official rom 1.66 on hd2
Click to expand...
Click to collapse
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
great app, but unfortunately my device is qvga.. i hope you realease a qvga version too
hi
i install it on my Diamond
and...it doesn't open
:'(
any idea??
thanx
xdaid said:
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
Click to expand...
Click to collapse
Hello xdaid,
First of all thanks for your support.
I've captured the coords manually for France as followed:
left (W): 4.2904
Right (E): 6.0704
Top (N): 48.2904
Bottom (S): 43.4005
Zoom level cannot be selected (grey square) and when i'm clicking on preview I still get the message "values out of range".
If i select the area through your tool i've got:
left (W): -2.8125
Right (E): 6.3281
Top (N): 50.15625
Bottom (S): 43.359375
Result is the "latitude-S cannot be lower than latitude-N" as message error.
I still cannot select zoom level as well.
Others infos:
map name> i leave it empty
outpout> none
source>openstreetmap
Hope it will help you.
Regards,
Renaud
xdaid said:
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
Click to expand...
Click to collapse
Hello xdaid,
First of all thanks for your support.
1/ I've captured the coords manually for France as followed:
left (W): 4.2904
Right (E): 6.0704
Top (N): 48.2904
Bottom (S): 43.4005
Zoom level cannot be selected (grey square) and when i'm clicking on preview I still get the message "values out of range".
2/ If i select the area through your tool i've got:
left (W): -2.8125
Right (E): 6.3281
Top (N): 50.15625
Bottom (S): 43.359375
Result is the "latitude-S cannot be lower than latitude-N" as message error.
I still cannot select zoom level as well.
Others infos:
map name> i leave it empty
outpout> none
source>openstreetmap
3/ by selecting your numbers (W1, E2, N2, S1) i'm able to selected zoom level from 11.
Download is not starting automatically (for info, i'm on wifi), output shows 49titles. I've put a name in map name, after start and download works and map folder with file image is created on litetrack main folder.
After, if i draw rectangle around France i'm still have "out of range value" message with those kind of values:
L(W): -0.703125
R(E):5.625
T(N):48.984375
B(S):43.828125
I've tried as well, gps on, to selected country where i'm leaving (UAE-Dubai) and same error message "Longitude W cannot be lower than Longitude E" with values
L(W): 52.26525
R(E): 55.3125
T(N): 25.078125
B(S): 23.671875
Hope it will help you.
Regards,
Renaud
andreatozzi said:
great app, but unfortunately my device is qvga.. i hope you realease a qvga version too
Click to expand...
Click to collapse
Oh yeah +1 for a qvga version
To Romeo Fox and other users who get "out of range" message
i found the issue, it looks really WEIRD
the problem is the conversion of text boxes' values into numeric floating values, weird cause the code appear to be right, and mostly cause my device, other devices i tested and wm 6.5 emulator work flawless.
I'll be fix it really soon, in the meanwhile try this:
select an area (France ), tap OK and then simply replace the characters '.' into the boxes (top, left, right, bottom) with the character ','
Let me know, but i'm pretty sure this works.
ver 0.2 - fixed!
I made some changes which should have solved issues encountered on hd2 and a couple of other devices:
- GPS handler fixed
- Map selection tool now working propely
Also app was succesfully tested on VGA square screen
Hope you enjoy!
waiting for some feedbacks, thanks
xdaid said:
I made some changes which should have solved issues encountered on hd2 and a couple of other devices:
- GPS handler fixed
- Map selection tool now working propely
Also app was succesfully tested on VGA square screen
Hope you enjoy!
waiting for some feedbacks, thanks
Click to expand...
Click to collapse
Hello xdaid,
tested new version. Download works now!! but only on wifi and not in 3G. There is a bug on saving track which generate error and close litetrack without saving it.
This is quite annoying. Otherwise others features and options seem working..
I'm only one to get this error on saving track?
Regards,
Renaud
Related
Hi Guys!
First of all thanks to all the folks out there who posted these ROMS etc. Keep up the good work.
Like to share my experience with the upgrade from 1.72.00 WWE / 1.14 to 2.06.00 WWE / 1.18.00. My bootloader is 1.03.
1. The update went smooth using step by step instructions by DCS and Mystery Man's ROM file (it gave an error at first '...cannot continue the upgrade. Restart the PDA and reconnect...' which I did and it worked fine from there on. I upgraded again a second time and it worked fine at first attempt.
2. The applications are all working although some icons/shortcuts have disappeared:
a) The File Explorer was there initially but after some time (or probably after installing some package) it just disappeared. I have installed the FREE Pocket Explorer in its place although I still wish I could restore the original. Any ideas? :?
b) I can launch Contacts from Phone application but there is no icon/shortcut for it anywhere else. It is not even available in Assign Buttons application and thus I have assigned Photo Contacts instead to the button. :roll:
c) Similarly Calendar items are available in Today screen and opens the calendar but the icon/shortcut is not available anywhere. Not even in Assign Buttons. :roll:
d) The Bluetooth connection icon in Taskbar is not available. Although the properties can be handled through Start->settings etc. :?
e) Camera does NOT work smoothly in Landscape mode. Well, its a bit tricky. If I first switch to Landscape and then turn on the camera, it opens in portrait mode. Now if I click the Contacts button, it switches to landscape. Good enough for me tough.
I will post more comments when I have more experience with SE.
Meanwhile, I will appreciate any help regarding the problems I am facing. :!:
Cheers!
I found this on a French site, by changing the registry you get an extra camera mode that adds current position in the EXIF part of the file!
You need to edit the key : HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 change from 0 to 1 (P9 is the Geocoding profile).
No need to soft reset, just go into the camera and set to Geocode mode (see capture)
The files get stored in My Documents/POI (maybe so they appear in Tom Tom?).
Anybody know of cool ways to use this feature? Flickr? Googlemaps?
Sorry if this has been covered already!
Oh hell yes.....
Madhadder said:
Oh hell yes.....
Click to expand...
Click to collapse
You mean it HAS been covered? could not find anything thru search....
I could never get it to work, it says the GPS is searching, but when I look at the photos I cant find any GPS coordinate data.
Anyone else actually try it?
G
I think Madhadder meant "oh hell yes I can't believe its so easy to add this feature you just made my week".
I'd like to say:
Oh hell yes!
GuardianZX9 said:
I could never get it to work, it says the GPS is searching, but when I look at the photos I cant find any GPS coordinate data.
Anyone else actually try it?
G
Click to expand...
Click to collapse
I think the data is included in the file itself in a special zone that holds info on model of camera etc.
There are some applications that "place" the pictures on maps, I do not know much about this but want to find out! The ideal would be to place them on googlemaps...
techntrek said:
I think Madhadder meant "oh hell yes I can't believe its so easy to add this feature you just made my week".
I'd like to say:
Oh hell yes!
Click to expand...
Click to collapse
Good but as much as I would love to take credit for this find, it is in fact from this site : http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=85924&whichpage=3#641517
8th post down.
edeplano said:
I found this on a French site, by changing the registry you get an extra camera mode that adds current position in the EXIF part of the file!
You need to edit the key : HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\P9 change from 0 to 1 (P9 is the Geocoding profile).
No need to soft reset, just go into the camera and set to Geocode mode (see capture)
The files get stored in My Documents/POI (maybe so they appear in Tom Tom?).
Anybody know of cool ways to use this feature? Flickr? Googlemaps?
Sorry if this has been covered already!
Click to expand...
Click to collapse
there are so many line items under that folder. Could you be more specific?
thanks..
I assume that the GPS must be turned on to give the correct position prior to taking the picture, am I right?
Enable
ahmadfarid said:
there are so many line items under that folder. Could you be more specific?
thanks..
Click to expand...
Click to collapse
P1-P9 are profiles for different camera modes. You'll notice that the "Enable" key is 0 in Profile 9. Change it to 1 and you should be good.
Also found this info on GPS passion, and was going to share, but never found the time....
I did the hack on my Ameo last weekend, and played around with it a little. It is ofcourse quite an amazing feature, and it does impress people that sees it, but given the quality of the camera in the Ameo, I'm not sure how usefull it will turn out to be, I would be a little embarassed to upload any Ameopics to Google at least.
Here is what I've found out sofar, if someone finds that useful.
When you start Camera, you get a new option when you choose your Photomode, called GPS. - This starts up the GPS automatically, and once it gets a fix you are ready to shoot.
The pics you then take are stored in /my documents/my Poi - which is created.
These pics will then have the GPS position included in the Exif data.
Haven't yet found a PPC software that is capable of reading these data, but if you read them with your ordinary pc, you can input them into google Maps (on PPC for instance) and it will take you there.
Picassa will read the data, and you can input them manually into your mapsoftware (the format is: xx yy' zz'' aa bb' cc'') but I would recommend "Panorado Flyer 1.2" which is a great free and small application. It gives you some new options in the context menu, so you just right-click your Gpspicture and choose "show location in Google Maps" - and it opens up Google Earth and takes you there.
There was some discussion on the precission of the GPS Data, actually on this very site I'm pretty sure, maybe the kaiser section(?) , someone noticed the last 2 decimals recorded for latitude and longitude allways were the same, so the precision was less than 100 meters, but the good news is this is not the case with our Athenas, they are very accurate!
I don't think I'm allowed to distribute Panorado Flyer here, but here is the link for you to download it yourself.
Hopefully someone will make a similar app. for PPC, which would make this feature so much more useful.
Here is a link to the free version: http://www.photo-freeware.net/panorado-flyer.php
And here is the commercial and probably more functional version (did not try it, but there is a demo): http://www.panorado.com/en/index.htm
I went to a birthdayparty this week and took a GPSpic inside an apartment on the 7. floor to demonstrate to all how brilliant the Ameo is, got a fix and shot a pic. The pic stinks, but if you want to try Pandora, you should be able to rightclick it and fly over here, even if I downscaled it....
And I just tried myself, and the GPS data did not survive the upload so it does not work, sorry.
Here is a shot of what Panorado rteads for that pic:
works well here
Actually you can use this format directly into Google earth, which is simpler I think:
55,685278 12,584445
Ok Midget, on my setup the GPS data was lost when I d'loaded my own pic from the post.
Also had to try it out on my old uni with an external GPS, but it doesn't have the P9 option, could that be because of the old HTC Camera version (3,00 build 21424) or must it have an internal GPS?
Anyone got the newer Camera version (like the one from the Ameo WM6 - 4.01 build 27598)?
hammermedia said:
P1-P9 are profiles for different camera modes. You'll notice that the "Enable" key is 0 in Profile 9. Change it to 1 and you should be good.
Click to expand...
Click to collapse
oh!..ok..i'll try it right away..
thanks
The new mode came right up when I made the registry change. Can someone confirm where the data is stored? Seems there are 2 places mentioned here.
That's freakin awesome! Possibly rates as my top feature of the moment! Good Hack!
And @ techntrek - it goes into my \microdrive\my documents\my poi\
Ace!
I have using panorado software but the error for several pictures on same place (1 square meter) is very large, some hundreds of meters...
beginner said:
I have using panorado software but the error for several pictures on same place (1 square meter) is very large, some hundreds of meters...
Click to expand...
Click to collapse
That is what you will also get when you use googlemap. It can be hundreds of meters off.
I read recently that US goverment wants to decrease the accuracy of GPS. I wonder if it is the result of this project that I noticed that the inaccuracy has been magnified lately.
WMDreamRemote (WMDR) - with streaming
UPDATE (22/04/2012): No more deadlines. The reason is that I am busy with other projects. I might implement other features in future. You can download from my web-site, http://www.tillekesoft.com. There you can find as usual two versions. One version is for devices using 320x240 but it should work fine also with devices having a resolution of 640x480. For all other resolutions, please use the other one. For existing users, you just need to replace the old executable with the new one.
06/10/2010 - I have attached a "step-by-step"-guide for setting up WMDR - in particular what regards streaming (it is in English but you can use Google Translation-tools to translate it to another language). Hopefully, this will make it easier for new users to get WMDR working.
IMPORTANT (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WMDR is not compatibile with the latest version of VLC. So if you want to use WMDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
Change-log: nothing so I am leaving old change-log here below:
This version is more like a Service-Release fixing some bugs and introducing few new features:
-fixed issue when using WMDR with Enigma2 outside your LocalLAN where WMDR passed on a DynDNS-address to the Dreambox instead of LocalIP-address which is the correct way. Thanks to mkbm for finding this bug.
-fixed streaming-issue in Enigma2 when changing between channels located on different transpoders would cause problems. Thanks to mkbm for explaining this.
-improved error-handling (clearer messages). Still to be improved further.
-possibility to kill stream when exiting WMDR
-other minor bug-fixes
-some optimization
-added a program-icon (it's very basic - if you can come up with a better-looking icon, please do so and post it here in the thread)
-fixed issue with DM8000
To see WMDR in action (using a pre-release of Beta 0.7), watch this video posted by XDA-user ajocius on YouTube:
Background: After on-going discussions in this thread http://forum.xda-developers.com/showthread.php?t=616353 regarding an application to control remotely the Dreambox, I decided to write an application to accomplish this request.
In above thread, a very simple and crude beta-application was posted. Now, the application has evolved further and therefore I reckoned it was more appropriate to open a new thread in this area which is meant for Window Mobile applications.
Extra Information: The Dreambox is a series of Linux-powered DVB satellite, terrestrial and cable digital television receivers (set-top box), produced by German multimedia vendor Dream Multimedia. It's "kind of" of open-source which has led many "teams" to develop so called "images" for this receiver as an alternative to the original one furnished by Dream Multimedia. In addition, many other hardware manufactures have produced their own receivers (some of them are actually clones while others are not) using the same concept of the Dreambox i.e. Linux-powered. The Dreambox has evolved during the years and many models are present on the market. The first ones are/were using a firmware called "Enigma" but, more or less, with the introduction of High Definition TV, a new firmware was released, namely "Enigma2". One of the "revolutionary" features of the Dreambox was that you can connect it to your local network and this opened up a whole new word compared to ordinary satellite-receivers. To get further information, just google for Dreambox or look it up at Wikipedia.
Background for the application: You can read the original thread mentioned above to get an idea why people wanted an application like the one I am releasing. In a few words: since you can access the Dreambox (or any other satellite-receiver based on Enigma or Enigma2) through your local network or through Internet, there are many things you can do remotely (at work for instance) such as handling timer-events, read EPG etc. The ideal way of doing it, especially if you don't have access to a PC, is to use a handheld device. It was brought to our attention, that there are plenty of applications to do what mentioned above already available for download on the Appstore for iPhone.
for instance:
http://appspace.com/apps/view/38502/idreamremote/
http://appspace.com/apps/view/40338/dreamon/
So, it was suggested to write a similar application for Windows Mobile. And here it is, still in beta although with quite a lot of features implemented, even Streaming-support.
Current Features:
-Streaming
-Remote Control
-Bouquets-/Channels-lists from where you can:
1) change channel
2) view EPG
3) set timers
-Controlling the receiver (Shutdown, Reboot etc)
-Supports set-up of multiple profiles (e.g. At work, home, bedroom)
-Supports set-up of multiple streaming-profiles (Local LAN, WLAN, mobile)
Known issues:
-is not compatible yet with old WebIf (1st generation) of Enigma2
-there might be some problems with certain characters not appearing correctly (please report if you have this problem)
-in 320x240 version when setting up Enigma-profiles, you might need to click twice in the various textboxes.
Features to implement in upcoming versions (not necessarily in this order):
- SMS (Send shortmessages to the TV-Screen)
- improve error handling further
- other ideas/stuff
- user-suggestions (your feedback for improvements)
- re-design the remote-control using png-images instead of jpg which should make the application a bit smaller (and require less memory)
- resolving above mentioned issues
- other bug-fixes
- support for other receivers - requests I have received are for D-box2 and IPBox HD (non Enigma)
- cosmetic issues
- Https (SSL) support. (tested and working but needs a specific hotfix-version of CF.NET (published by Microsoft) due to a bug in CF.NET)
Requirements:
-Compact Net Framework (2.0 should be sufficient)
-an Enigma-based receiver such as the Dreambox, IPBox etc..
-for streaming, please see second post below
Installation:
Note: I have not made any CAB-file.
Note2: If you want to keep your old settings and streaming-profiles, you may do so. Just replace the old WMDreamRemote.exe with the new one.
1) download the zip-file attached to this post and extract the files on your computer.
2) Copy the files into a directory of your choice on your device (internal or
storage). The files must be in the same directory.
3) Run WMDreamRemote.exe. The first time, you will get a message
saying "No connection....".
4) Choose Preferences/Profiles from the main-screen and ADD a new
profile inserting your data. Put the flag on default for the profile you use the most.
5) Then click Save Profile.
6) Go ahead if you wish to add other profiles.
7) You may delete my dummy-profile "home" (only after having added your own though) using
the Del-button. NOTE: It's important that there is always one profile present (with Default selected)
otherwise there might be unexpected errors
8) On the main-screen, you can now use the remote-control by selecting its button
9) You may also see a bouquet/channel list by clicking on its button. However, the first time the list will be empty. Therefore,
10). Go back to Preferences/Profiles and select the profile you want to use. Now select the
button named "Create Bouquets for this profile". This will take a minute or two. It will download
your bouquets and channels from your Dreambox. Do the same for each Profile you create.
11) Now you can scroll your bouquets ad channels.
12) Set up streaming-profiles (3 dummy profiles are provided for Local-LAN, WLAN and mobile) - see second post for more information
There might be some unhandled error-messages occasionally. They are mostly due to connection-problems. Just click on continue and retry unless you have indeed a permanent error with your connection.
Please test it and let me have your error-reports, feedback and suggestions for improvements. Please also indicate which device, Dreambox (or similar receiver) you are using and which image.
I must also express my sincerest thanks to XDA-user ajocius for:
-giving me access to Enigma2,
-his superb beta-testing,
-sharing his knowledge about streaming
-and of course for the great video he posted on YouTube (see above).
I have also attached some screenshots.
PS: ANDROID - Just a note to tell you that I posted here on XDA an Android-application for watching your Dreambox in streaming (LocalLAN and 3G). I called the application AndroidDreamer and you can find the thread here: http://forum.xda-developers.com/showthread.php?t=861145
If you want to test and discuss AndroidDreamer, head over to the thread. Please keep this thread for WMDR.
PS2: WINDOWS - I have published a Windows-version (WinDreamRemote or simply WinDR). You can find it on my web-site: http://www.tillekesoft.com
For discussions regarding WinDR, please use the thread mentioned on my web-site. This thread here at XDA is for WMDR - mobile version. Please respect this.
This is it for the time being.
STREAMING
Streaming works great for me, especially at home (in my Local LAN) but also at work (using WIFI) and even at the supermarket using a mobile-connection (3G) although the quality degrades.
For you, I don't know - Streaming may work, may work so and so or may not work at all.
It depends on a lot of factors:
-For Local-LAN: your WIFI set-up at home (11g, 54g etc)
-For WLAN or mobile: upload/download speed of your Broadband (normally upload-speeds are slower than download-speeds (ADSL)
-Your device
-Your computer acting as VLC-server
-not finding the right configuration in stream-profiles settings
-etc
What you need:
1) VLC (Videolan). Just Google for it and install it on your computer which will act as the VLC-server. I have only tested streaming using VLC running on Windows but it should work on VLC-servers using Linux and MAC as well. If it doesn't, please let me know. I have only tested version 1.0.5 of VLC so I am unable to say if previous versions will work.
UPDATE (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WinDR is not compatibile with the latest version of VLC. So if you want to use WinDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
2) TCPMP (free and which you can find here on XDA) or Coreplayer (not free). Make sure that ASX-files are opened by the program you installed (look in the programs' settings for file-association). Some say that TCPMP is faster to load the stream (5-6 seconds in my Local-LAN) than Coreplayer. On the other hand, some say that Coreplayer is more fluid. The choice is yours.
3) A rather modern and fast device. It might work with slower devices as well but you may have to play a lot with your VLC-configuration (bitrate etc) before you get it to work
4) and of course WMDR
How to set up everything:
1) install VLC on your computer which will act as the VLC (streaming) -server. Then under the menu, select "View" in the English version (not sure since I have it in Italian) and then select "Add Interface" and finally you select "Add Telnet-interface". If you haven't changed anything, the default password for Telnet is admin and the port in use is 4212. That's it. VLC must be running to get streaming working. There are options to install VLC as a Windows Service or you can create a bat-file to be executed upon launch of your VLC-server. I guess similar options are availabe on Linux and MAC as well.
2) if you are going to use streaming outside your Local-LAN, you must ensure that you have set up port-forwarding correctly in your router. You must ensure that the WebIf can be accessed. You must ensure also that port 4212 (for Telnet) is opened and forwarded to the VLC-server. The same goes also for the streaming-port on the VLC-server which TCPMP/Coreplayer needs to access to receive the stream. So, basically you need to set up port-forwarding for one port for accessing the WebIf of your Dreambox and two ports for accessing your VLC-server.
3) A typical VLC-command to get streaming going is as follows:
Code:
vlc.exe" -vvv [url]http://192.168.1.130:31339/0,0025,0384,0385,0295[/url] --sout #transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst=192.168.1.12:8085}}
Here are some explanations:
- the part "vlc.exe" is handled by WMDR using Telnet. You don't need to anything except for filling in information regarding the IP-address of your VLC-server, its password and which port to use.
- the part
Code:
"http://192.168.1.130:31339/0,0025,0384,0385,0295"
is your dreambox-ip, the port used for streaming and some channel-parameters. These parameters are handled automatically by WMDR and do not require your attention
- the part
Code:
"#transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst="
is the one you have to insert in WMDR and which you need to experiment with to get the best picture/quality/fluidity according to your connection-speed. WMDR is pre-installed with 3 examples which are working on my HD2, my WIFI (using 54g) and my ADSL with an upload speed of 512kb. You can use those as an example and then modify them according to your needs.
- the part "192.168.1.12:8085" is the IP of your VLC-server and the port which TCPMP/Coreplayer should connect to in order to get the stream. You fill in this information in the stream-profiles.
With this information, you can set up your streaming-profiles in WMDR. In the streaming-profiles, you will find an additional setting called "VLC Sleep Delay". You can leave it at 200ms as its default-value. This parameter is used by WMDR when "talking to" VLC via Telnet. If the connection is very slow, you can increase this value but normally, even on Mobile-connections, the value of 200ms is OK.
Above information should get you going.
If you have problems with streaming, look at the points mentioned above since it is unlikely due to WMDR itself and that I can do anything to resolve your problems.
Good luck!
TIPS AND TRICKS:
-To make TCPMP open up automatically in full screen mode, you can do the following registry-edit:
Code:
HKEY_LOCAL_MACHINE\Software\TCPMP\PLAY
DWORD 123
Change value from 0 to 1
-For associating the file-extension ASX with TCPMP, do as follows: In TCPMP it is under:
Options -> Settings (you need to scroll down to see that option) - > Click button "Select Page" - > File Associacions
Click to expand...
Click to collapse
-As far as I have understood, TCPMP has been discontinued but there are some people updating it from time to time. If you have problems viewing the stream, it may (perhaps) be because you are using an old version of TCPMP. Here are two links to TCPMP which I have found working on my HD2:
http://forum.xda-developers.com/showpost.php?p=5657963&postcount=1
http://forum.xda-developers.com/showpost.php?p=5685536&postcount=1
TROUBLESHOOTING
- If you get errors in TCPMP (unknown file format, crashes) or if you don't see anything at all, you can try the following to trace where the error originates:
Select Stream in WMDR and if you get an error message from TCPMP, just disregard the error and put your device on the table or wherever. Don't click on anything. Don't kill the stream. Now, in the folder of WMDR on the device, you should find a file called WMDR.asx. Copy this file to your desktop (on a PC). Go to your PC and right-click on WMDR.asx and choose "open with" and select VLC (it will open another session of VLC). If you now can see the stream from your Dreambox on your computer-screen, then it means that WMDR comunicates correctly with VLC and most likely there is a problem with TCPMP/Coreplayer or because the file is too large/complex to be seen on the device. If you don't see anything, then probably there is a communication-problem between WMDR and VLC. Check IP-address, Port and Password of VLC.
- Make sure that streaming actually works between your Dreambox and VLC (without using WMDR) and that you can watch the streams on your computer. You can test this by using the web-interface of your Dreambox or you can search internet for instructions. If you have problems (can't see anything at all, bad quality, buffering-problems etc), then the problem itself lies with the source and there is no way streaming will work in a satisfying way. For instance, it has been reported that cheap (clones of) DM500 might have problems with streaming.
is this like a remote control app for any settop boxes and tv's that uses ir port or is it limited to the Dreambox?
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
trickbiker121 said:
is this like a remote control app for any setop boxes and tv's that uses ir port or is it limited to the Dreambox?
Click to expand...
Click to collapse
tilleke said:
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
Click to expand...
Click to collapse
sorry this isnt the app that i thought it was sorry to bother you
Hi Tilleke
Very nice looking release. I'm really happy with it!
i have tested it and here are my results:
Main screen > remote controle > page 2 > the numbers are not working here.
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do...
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Thanks for testing and posting your results.
Can you please let me know which receiver you have and which image you are running. And on which device did you test it?
Will check this better.
citychannel said:
Main screen > remote controle > page 2 > the numbers are not working here..
Click to expand...
Click to collapse
When creating the bouquets, did you follow the procedure written in the first post? I am saying this since that part is not fool-proof yet. Did you reach the point when a message appears indicating "Update ready" or did it crash before. BTW: I have never seen a crashed dreambox with a blue screen I'd love to able to reproduce that error
citychannel said:
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do.....
Click to expand...
Click to collapse
Thanks!!
citychannel said:
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Click to expand...
Click to collapse
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
thanks for your report.
1) OK, you've got DM7025 and running Enigma(1). Are you using the original image or have you flashed another image such as Gemini, Nabilo...If yes, which one?
2) Can you access the WebIf of the DM7025 using your local network and using a normal web-browser? In your browser, you should use:
Code:
http://ip-address of DM7025:port
it should then ask you for a user-name and password, normally root and dreambox.
example:
Code:
http://192.168.0.83:8888
If you are using the standard port (80), it could also be:
Code:
http://192.168.0.83
When you are connected to the WebIf and clicking on ZAP, can you see your bouquets and channels?
3) The time-out bug: What message do you get. Can you please transcribe it? Does this happen when you are connected using WIFI or when you are connected using the data-connection of your phone-provider?
4) what device are you using?
Sorry, but I need above information otherwise I really don't see how to track down the errors you mentioned since I can't reproduce them on my system/device.
PS: I confirm that the numbers on the 2nd screen don't work. I forgot to enable a few lines in my code. Will be corrected in next version. Thanks for finding out.
citychannel said:
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
Click to expand...
Click to collapse
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Glad it works.
Thanks for reporting the problem with the German letters. This probably means it would be a problem with other characters as well. I will check this issue and see if I can correct it in next release.
Bib_x said:
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Click to expand...
Click to collapse
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Thx for the suggestion. I'll see what can I do.
Bib_x said:
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Click to expand...
Click to collapse
Yep. Already reported by citychannel. See first post under known issues.
Bib_x said:
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Click to expand...
Click to collapse
Thx for the information. This will facilitate tracking down the error and how to resolve it.
citychannel said:
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
Click to expand...
Click to collapse
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
It already works...
I have a profile called "away" which I use to set timer-events when I am not at home. Set up a new profile and in the IP-address-field, just write your DynDNS-address and in the Port-field the port you are using.
You might, of course, need to enable portforwarding in your router-settings.
Hope this helps.
^^MeX^^ said:
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
Click to expand...
Click to collapse
A little bit offtopic:
Do you know which ports i have to forward in my router if i want to stream my dreambox-tv-program over internet with vlc?
Streaming in LAN works well, but i want to watch TV outside my home, too.
Hello everyone,
We have released a free new Windows Mobile application called Who's Near Me. In a nutshell, this application uses GPS (or cell tower info if no GPS) to determine your location and then displays other users that are nearby you - along with their photo, age, gender, and bio. You can then start an anonymous message conversation with anyone on the list. It uses your data connection only so you are never charged for any text messages.
The application is still considered beta but has already been in closed testing for a few weeks. Most major issues should be resolved at this point. We plan to add it to the Microsoft Marketplace for Mobile as a free application in the next few weeks - at which point we expect the number of active users to increase substantially. A Windows Phone version (with additional functionality) will also be available at the launch of the WP7 platform.
The application is free (100% free, no advertisements even), small, and pretty cool. You can download the latest version of the application from our website as a cab file directly to your phone at http://www.synergetechsolutions.com/whos-near-me.aspx. The download link is pretty clearly located to the right of the page title. I have also uploaded the current release's cab file to this post. This current release is focused for touch devices and no testing has been done with non-touch phones. Windows Mobile 5.x and 6.x are both supported. The Microsoft .Net Compact Framework 2.0 is required on the device.
Since the application is in beta, your feedback would be greatly appreciated. You can either use the feedback form in the application or post your feedback to this forum post.
Thanks,
Brian P. Hamachek
President & CEO
SynergeTech Solutions
Cool app. If you all can get everyone to adapt and use this program, it could become it's own personal social network giant. Kind of like speed meeting
Who's near me?
Well - I still don't know. Heard about the app from 1800pocketpc. But so far, can't get it going. Downloaded from the dev's website. It says it was installed correctly. Then when I open it it says, "Connecting to service..." and it just goes around and around without ever connecting.
I wonder if it is because I live in a rural area (Boron Ca 93516) without very good cel coverage? Bc I thought I read it works to position you through cel towers.
I have no idea. Wanted to test it. But no luck so far.
Crash after view SynergeTech user profile. Fail to connect to server then.
Using HTC HD2.
started good,chatted a little bit.also notified by answers.
then after a while, I tried to answer again and app crashed. restart didn't work "profile error"
After soft reset my hd2 was very slow.no background process to see.restart still failed.
reinstall takes no effect.sometimes it crashes to answer, afterwards profile error.
but the app is young and a great idea.
please add options to switch off/on gps localization and use cell manually.
the footprint/cpu usage is quite high and noticeable on hd 2...
sended also report by app, but crashes afterwards...
keep up good work! thanx
Mine also just stops and get stuck on the Connecting to service... on my touch pro 2.. great concept though.. Cant wait to get a working version.
Same thing here. Gets stuck at the connecting screen. ...On TP
Will be waitin for the app to start working...
Thanks for all of the feedback. As I stated, this application is still a beta release. We have just published a major update though and the issues some of you were having should be resolved at this point. The application is picking up popularity in Europe so it is definitely worth taking a look at if you live there. Here are the changes that this update include:
Substantially redesigned the user interface (see attached screenshots)
Added a settings screen - including filters for narrowing down the nearby people list
Added support for showing distances in either Kilometers or Miles
Added ability to "delete" messages in order to reduce clutter
Fixed local timezone bug on messages list.
Added terms and conditions consent screen.
Fixed geo-locating issues for some locations.
Added auto-update (with a confirmation prompt) feature.
Fixed issue that caused profile to revert to showing age 13
Many, many, many performance/bandwith enhancements
Many, many, many minor cosmetic and usability improvements
Overall, the application is much more usable now. We hope to get it into the Marketplace for Mobile as soon as possible - which is when it should really get intresting.
You can learn more here: synergetechsolutions.com/whos-near-me.aspx
I have attached the latest cab file for the application to this post.
Thanks!
Latest beta still is not working on my Sprint Tp2. I hit agree to terms and conditions page and gets stuck there now. Would like to give this a try..
Check and see if there is a file called "WhosNearMeLog.txt" in your My Documents (or Personal) folder on the device. If an error is occuring during connecting, it should be logged there. Please send me that file and I will diagnose the issue for you and either fix it in our software or let you know how to resolve it on your end. Thanks.
at first: it's an app, which it free and a beta - soo I appreciate your efforts and don't mind in any way if something doesn't work.
just want to say thank you!
now the result if new cab:
it can't connect to service.
I installed it to internal storage and switched on wifi.
but no way to start it.
I saw... you rely on wwe ... and I have german rom. so I didn't found it in startmenü (= start menu) and had yoi start it in /storage card/programme (not programs or program files)
perhaps the .cab lacks the international parameters like %ce1% or %ce11% ?
or inside app is a wwe-path hardcoded?
here's my log:
--------------------------------------------
12.05.10 23:09:32
System.FormatException: FormatException
bei System.Double.Parse(String s, NumberStyles style, IFormatProvider provider)
bei SynergeTechSolutions.WhosNearMe.Client.WinMobile.SplashScreen.StartApplication()
bei SynergeTechSolutions.WhosNearMe.Client.WinMobile.SplashScreen.timer1_Tick(Object sender, EventArgs e)
bei System.Windows.Forms.Timer._WnProc(WM wm, Int32 wParam, Int32 lParam)
bei System.Windows.Forms.ApplicationThreadContext._InternalContextMessages(WM wm, Int32 wParam, Int32 lParam)
bei Microsoft.AGL.Forms.EVL.EnterMainLoop(IntPtr hwnMain)
bei System.Windows.Forms.Application.Run(Form fm)
bei SynergeTechSolutions.WhosNearMe.Client.WinMobile.Program.Main()
It's working fine on my T-Mobile HD2. Wish there were more people using it though (of course). Nearest person to me is 3000+ miles away...hahaha
Works on Hd2
Just testing it now, works well. Thanks.. Found 28 people and nearest person is 48 miles away
MichelDiamond said:
I saw... you rely on wwe ... and I have german rom. so I didn't found it in startmenü (= start menu) and had yoi start it in /storage card/programme (not programs or program files)
perhaps the .cab lacks the international parameters like %ce1% or %ce11% ?
or inside app is a wwe-path hardcoded?
Click to expand...
Click to collapse
I will look into this. The application is currently being used primarily by users located in Germany (due to a popular German website writing about it) and I haven't heard of this problem yet so not sure why it isn't showing in your start menu.
MichelDiamond said:
I installed it to internal storage and switched on wifi.
Click to expand...
Click to collapse
Someone else reported that the application would not run when installed on a storage card. They reinstalled in the device's main memory and it worked for them though. The application isn't excessively large (around 1MB) so hopefully this will be a suitable workaround for you. This will be addressed in hopefully the next release though.
TechnoHippie said:
Wish there were more people using it though (of course). Nearest person to me is 3000+ miles away...hahaha
Click to expand...
Click to collapse
Obviouslly, this application's value really won't show until a fairly substantial userbase has been established. I am actually fairly encouraged by the number of users that the application has established already though. I was expecting hopefully 50 users would help beta test the application. In reality, the application has had well over 1,500 users try it in just the last 48 hours. Our goal is to add the application to the Microsoft Marketplace for Mobile as a free download once the bugs have been eliminated - hopefully sometime in the next 2 weeks. Hopefully, that exposure will be enough to get the number of users high enough to make the application intresting. Microsoft has also expressed intrest in helping promote the application.
I created a story on Digg about the application. Feel free to Digg it at http://digg.com/d31Qx8J. If it gets enough Diggs, that would really help to get the word out there about it as well.
Thanks!
SynergeTechSolutions said:
Check and see if there is a file called "WhosNearMeLog.txt" in your My Documents (or Personal) folder on the device. If an error is occuring during connecting, it should be logged there. Please send me that file and I will diagnose the issue for you and either fix it in our software or let you know how to resolve it on your end. Thanks.
Click to expand...
Click to collapse
Thanks,
I have tried installing to sd and main memory with no luck. I get past the connecting to service page, but after i hit agree on the terms and conditions page it just gets stuck there. I dont have "WhosNearMeLog.txt" anywhere on the device.
Thanks again for your ongoing support.
Does your culture's number formatting conventions use a comma before the decimals? For example: 1,20 rather than 1.20
Well, that is what beta tests are for, right?
Jdignazio, please let me know if this updated version works for you.
Version 0.4 BETA (Released on 5/13/2010)
- Fixed issue that prevented connection from devices set to a locale that uses a comma before decimal digits (Example: 4,77 rather than 4.77)
- Redesigned profile picture selection screen and also added functionality to use phone's camera to take a new photo for usage as the profile photo
- Fixed issue where deleted message conversations would return upon the next launch of the application
http://www.synergetechsolutions.com/whos-near-me.aspx
Still no go on a HTC TP2 on Sprint. Retried installing the new version in main memory.
Some suggestions:
Please add a version number to the name of the file.
Please add autocheck.autoupdate feature in the program once it is run.
thanks and keep up the good work.
Who's near me APP
Tried it seems to be working pretty good here in Seattle. No one even remotely close to me and plus they all dudes.....bummer
seems to work fine for me, installed and running from the storage card on my HD2. using vodaphone as a supplier.
nearest person is 33 miles away from me, and i live in hemel hempstead in the UK.
Mike
Nokia Amber ROM Leak for Lumia 920.
RM-821: 059S6R5 and 059Q9N8
Remember to remove the checksum from each file (XXXXXXXX_Example.xxx) before the flashing process in order to recognize the ROM.
Location for the ROM:
Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages\Products\rm-821
Windows 7,8: C:\ProgramData\Nokia\Packages\Products\rm-821
Link files Amber ROM:
3047.0000.1326.XX
http://nds2.fds-fire.nokia.com/fds_fire/1307/2618/7248297155/B1E09708_RM821_059S6R5_3047.0000.1326.2002_068.vpl
http://nds2.fds-fire.nokia.com/fds_fire/1307/2618/7248297218/BC8C692B_RM821_059S6R5_hwt_v068.bin
http://nds2.fds-fire.nokia.com/fds_fire/1307/2618/7248297217/CBE16B6F_RM821_059S6R5_ccc_v068.bin
http://nds2.fds-fire.nokia.com/fds_fire/1307/2618/7248297220/31443CC9_RM821_059S6R5_3047.0000.1326.2002_068_signature.bin
http://nds2.fds-fire.nokia.com/fds_fire/1307/2618/7248297219/4EE3A88F_RM821_059S6R5_3047.0000.1326.2002_068.dcp
http://nds2.fds-fire.nokia.com/p/d/fds_fire/NWP8_simlock_3gstandard_bb5_crcA59A.bin
http://nds2.fds-fire.nokia.com/p/d/fds_fire/DC_template_development_v4.bin
http://nds2.fds-fire.nokia.com/p/d/fds_fire/1210/3111/7114794893/F5B2D6F0_RM-820_RM-821_RM-822_TypeLabel_Group3_DM_CoO_Fre_003.xml
http://nds2.fds-fire.nokia.com/p/d/fds_fire/1210/3111/7114794072/D0135427_108908v1.pcx
http://nds2.fds-fire.nokia.com/fds_fire/1307/1106/7238568077/E0AB9254_CustomerNvi_e6ffa8fd50ba3011c7d039542529589f_3047.0000.1326.2_239138_1069.nvi
http://nds2.fds-fire.nokia.com/fds_fire/1307/1106/7238568076/0D8F6B23_RM821_3047.0000.1326.2002_RETAIL_eu_france_267_02_239138_prd_signed.ffu
3049.0000.1330.XX
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263769419/6F8F7B91_RM821_059Q9N8_hwt_v100.bin
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263769418/30977299_RM821_059Q9N8_ccc_v100.bin
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263769421/713B192F_RM821_059Q9N8_3049.0000.1330.0006_100_signature.bin
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263769420/7A337821_RM821_059Q9N8_3049.0000.1330.0006_100.dcp
http://nds2.fds-fire.nokia.com/p/d/fds_fire/NWP8_simlock_3gstandard_bb5_crcA59A.bin
http://nds2.fds-fire.nokia.com/p/d/fds_fire/DC_template_development_v4.bin
http://nds2.fds-fire.nokia.com/p/d/fds_fire/1210/3109/7114749195/RM-820_RM-821_RM-822_TypeLabel_Group1_DM_CoO_Eng_003.xml
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263762080/602D53C7_RM821_059Q9N8_3049.0000.1330.0006_100.vpl
http://nds2.fds-fire.nokia.com/p/d/fds_fire/1211/0612/7117623546/C3586840_108918v1.pcx
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263762090/5B02E1F5_CustomerNvi_10ea7c03723547ffaf4ce26e138c637d_3049.0000.1330.0_259494_2389.nvi
http://nds2.fds-fire.nokia.com/fds_fire/1308/1909/7263762081/CF1E955B_RM821_3049.0000.1330.0006_RETAIL_apac_australia_new_zealand_304_06_259494_prd_signed.ffu
The files should look like this after removal of checksum:
RM821_059S6R5_3047.0000.1326.2002_068.vpl
RM821_059S6R5_hwt_v068.bin
RM821_059S6R5_ccc_v068.bin
RM821_059S6R5_3047.0000.1326.2002_068_signature.bin
RM821_059S6R5_3047.0000.1326.2002_068.dcp
NWP8_simlock_3gstandard_bb5_crcA59A.bin
DC_template_development_v4.bin
RM-820_RM-821_RM-822_TypeLabel_Group3_DM_CoO_Fre_003.xml
108908v1.pcx
CustomerNvi_e6ffa8fd50ba3011c7d039542529589f_3047.0000.1326.2_239138_1069.nvi
RM821_3047.0000.1326.2002_RETAIL_eu_france_267_02_239138_prd_signed.ffu
Changelog:
•Glance Screen: Clock Charging indicator / low battery Indicator for silent / vibra mode, night mode (change color for night time). OFF by default.
•Smart camera capture the best moment: Accidental remove unwanted objects from the scene. Select the best shot and precise moment. Sequence take a group of images with advanced face, smile and blink detection. The, best 'face for each person is automatically selected into a single, best' shot.
•FM Radio: Be ready to tune your favorite station - FM Radio is BACK! Store your favorite stations for the next time.
•Flip: Flip to silence the phone to turn it silence.
•Data Sense: Managing your data flow monitor and control data usage. Optimally compressing web traffic.
•Find your closest hotspot: Enriched web services (for operators).
•HERE branding Location & Commerce
•Here Maps v3.4: Your compass is a discovery What's New: Increased venue map coverage Favorites saved in HERE Maps now sync across all HERE experiences Personalized Live Tile options: Pin and Pin destination to start a place to start as favorite Pin Pin to start a place category to start
•Here Drive + v2.2: The open road made easy What's New: Sync favorite places with other apps HERE and here.com Customize your map to display relevant points of interest, dry as restaurants, gas stations, and more one-tap access to speed limit Alert options right from the dashboard Personalized Live Tile options: Pin to Start a destination (one tap gives driving directions to That destination)
•Here Transit v3.5: Now arriving: the best way across town What's New: Access your favorites through your searches Display nearby stations directly on a map opens Transit Maps to display more route options Transit Maps opens to display the battles navigation options Personalized Live Tile: Pin a destination like Home, Work, or School to start (one tap shows public transit routes and times to get there from wherever you are)
And these are some of the features part of the Windows Phone 8 GDR2 update.
•Xbox Music facilitated selection, procurement and pinning music. Also for fans of music are provided to display more detailed metadata (eg information about the songs and albums), and made other improvements.
•You can listen to FM radio: FM radio directly in the heart of Music + Video. (This is not available in some phones).
•Data Sense: Sense With the service date have complete control over the amount of data sent over the phone. You can impose a limit corresponding to your subscription or simply keep track of which applications send much data. (Not all mobile operators offer the service offering Sense).
•Application: Skype applications to support VoIP (Voice over Internet Protocol), for example, Lync and Skype now gained greater stability and efficiency of operations.
•Comfort: Internet Explorer web browsing will be greatly improved by better compliance with HTML 5
•Other improvements includes many other improvements of Windows Phone.
Use at your own risk...and do not forget to click in the thanks :good: button.
What do you mean to remove checksum from each file ?
Can you explain little bit if its not problem ?
(Sorry fresh out of android )
Is there 4g selection in settings in this rom?
Thanks!
NIKOSXRI said:
Is there 4g selection in settings in this rom?
Thanks!
Click to expand...
Click to collapse
I have this ROM in my Lumia 920 and have the 2G/3G/4G Tether work so far and also a few new features like I mention in the 1st post.
Nedzadk said:
What do you mean to remove checksum from each file ?
Can you explain little bit if its not problem ?
(Sorry fresh out of android )
Click to expand...
Click to collapse
this mean that as example this file:
B1E09708_RM821_059S6R5_3047.0000.1326.2002_068.vpl
Should be rename as: RM821_059S6R5_3047.0000.1326.2002_068.vpl
Delete just "B1E09708_"
Hope is clear now...
halabibk said:
this mean that as example this file:
B1E09708_RM821_059S6R5_3047.0000.1326.2002_068.vpl
Should be rename as: RM821_059S6R5_3047.0000.1326.2002_068.vpl
Delete just "B1E09708_"
Hope is clear now...
Click to expand...
Click to collapse
"C:\ProgramData\Nokia\Packages\Products\RM-821\RM821_059S6R5_3047.0000.1326.2002_068.vpl has invalid signature."
drupad2drupad said:
"C:\ProgramData\Nokia\Packages\Products\RM-821\RM821_059S6R5_3047.0000.1326.2002_068.vpl has invalid signature."
Click to expand...
Click to collapse
you forgot to rename some of the files
I see in your picture at least two files not being renamed, the third and fourth ones.
drupad2drupad said:
"C:\ProgramData\Nokia\Packages\Products\RM-821\RM821_059S6R5_3047.0000.1326.2002_068.vpl has invalid signature."
Click to expand...
Click to collapse
You must delete the Checksum for each file and copy in the correct folder, after you load NCS select RM-821 and highlight the 059S6R5 and proceed to flash without the phone connected. Power off phone.
So connect the phone just after you press the Vol down + PWR and as soon vibrate and them press flash, a message will appear that this product code not for this device, so you may need to press continue.
drupad2drupad said:
"C:\ProgramData\Nokia\Packages\Products\RM-821\RM821_059S6R5_3047.0000.1326.2002_068.vpl has invalid signature."
Click to expand...
Click to collapse
See fist post again, I see in the picture that you did not remove the checksum in all files....
halabibk said:
See fist post again, I see in the picture that you did not remove the checksum in all files....
Click to expand...
Click to collapse
I renamed all files like these from example on another site:
108908v1.pcx
DC_template_development_v4.bin
CustomerNvi_e6ffa8fd50ba3011c7d039542529589f_3047.0000.1326.2_239138_1069.nvi
RM-820_RM-821_RM-822_TypeLabel_Group3_DM_CoO_Fre_003
NWP8_simlock_3gstandard_bb5_crcA59A.bin
RM821_059S6R5_3047.0000.1326.2002_068.dcp
RM821_059S6R5_3047.0000.1326.2002_068.vpl
RM821_059S6R5_3047.0000.1326.2002_068_signature.bin
RM821_059S6R5_ccc_v068.bin
RM821_059S6R5_hwt_v068.bin
RM821_3047.0000.1326.2002_RETAIL_eu_france_267_02_239138_prd_signed.ffu
Still get error!
drupad2drupad said:
I renamed all files like these from example on another site:
108908v1.pcx
DC_template_development_v4.bin
CustomerNvi_e6ffa8fd50ba3011c7d039542529589f_3047.0000.1326.2_239138_1069.nvi
RM-820_RM-821_RM-822_TypeLabel_Group3_DM_CoO_Fre_003
NWP8_simlock_3gstandard_bb5_crcA59A.bin
RM821_059S6R5_3047.0000.1326.2002_068.dcp
RM821_059S6R5_3047.0000.1326.2002_068.vpl
RM821_059S6R5_3047.0000.1326.2002_068_signature.bin
RM821_059S6R5_ccc_v068.bin
RM821_059S6R5_hwt_v068.bin
RM821_3047.0000.1326.2002_RETAIL_eu_france_267_02_239138_prd_signed.ffu
Still get error!
Click to expand...
Click to collapse
That is ok, if you do the correct procedure to flash, it will continue. What the error mean, is that Nokia can not verified the files, because this version is newer that the one Nokia compare online with the Login as NokiaCare External.
I have the 059R016 variant. Should this ROM work for me too, after renaming it?
its work!
halabibk said:
You must delete the Checksum for each file and copy in the correct folder, after you load NCS select RM-821 and highlight the 059S6R5 and proceed to flash without the phone connected. Power off phone.
So connect the phone just after you press the Vol down + PWR and as soon vibrate and them press flash, a message will appear that this product code not for this device, so you may need to press continue.
Click to expand...
Click to collapse
with these instructions, it worked! thank you!
Noppes123 said:
I have the 059R016 variant. Should this ROM work for me too, after renaming it?
Click to expand...
Click to collapse
Yes it will work... Just follow the instructions for the rename of the files.
Total newb question, I know I can't flash the 821 to the att 820, but I take it there's not "leaked" version of the att rom?
So theres no way to get this on my AT&T lumia 920? :[
Hi, thanks for the share.
Question: I have the EU version of the RM-821 (Lumia 920, yellow) Can I use this firmware to flash my device, or will the French language of these files be a problem?
lobbie1978 said:
Hi, thanks for the share.
Question: I have the EU version of the RM-821 (Lumia 920, yellow) Can I use this firmware to flash my device, or will the French language of these files be a problem?
Click to expand...
Click to collapse
Yes you can use, the language can change during the setup or later on in the settings.
Etaduck said:
Total newb question, I know I can't flash the 821 to the att 820, but I take it there's not "leaked" version of the att rom?
Click to expand...
Click to collapse
Yes you can the process is to change to Roger and them to DEV edition RM-821, you may use as references this post.
http://forum.xda-developers.com/showthread.php?t=2112674
But as far I know there is no way to go back to RM-820.
yunchikan said:
So theres no way to get this on my AT&T lumia 920? :[
Click to expand...
Click to collapse
See post #19...