Hi,
Just like in subject, I need to replace my Touch screen in Sprint HTC Touch Pro, but after reading stories of people that were trying to replace the touch panel only, decided to change the LCD screen as well to simplify instalation.
Found many sellers on eBay, but how can I tell which one is OEM Original and not some chinese fake?
Has anybody purchased from any of them and can recommend/verify screen being identical to the one in their phone? And I mean, every resistor was identical etc... Can you tell which one is original looking at their pics?
1. http://cgi.ebay.com/Full-LCD-Screen...ewItem&pt=PDA_Accessories&hash=item3efedd43df
2. http://cgi.ebay.com/LCD-Screen-Digi...ewItem&pt=PDA_Accessories&hash=item3354f68c9c
3. http://cgi.ebay.com/New-Sprint-HTC-...ewItem&pt=PDA_Accessories&hash=item519319f465
4. http://cgi.ebay.com/New-Sprint-HTC-...ewItem&pt=PDA_Accessories&hash=item3cac3180b8
Thanks in advance
I have a HTC touch pro that got wet - it flashes and boots, just never ran stable again.
Great for parts - cheap!!
Related
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
http://mikechannon.net/PDF Manuals/HTC Herald Sevice Manual.pdf
download and read that ,it will show you how to disassemble the herald and take the screen out
Replacing digitiser on Herald as opposed to Hermes
Scuse me for butting in but I have both just bought a Herald with a broken screen AND have done a few screen replacements on Wizards, Blue Angels and Hermeses.
On this Herald I had just assumed that you could basically follow the video on YouTube which shows how to replace a screen on a Hermes? I see that the PDF file is quite complicated and is designed to show you how to take off every tiny part if it has failed. The screen replacement is far easier that this, right?
Secondly, I see that you can buy the screen separately from the 'protector' which is I assume the bit with the hole in on your unit? I have to say, I had never seen these replaced separately before: Is this something special to the Herald or can you replace this digitizer separately from the screen on other units as well? If so, how on earth do you get it off the screen please? And is there a reliable way of getting one back on? (There is no reference to this in the pdf manual but the digitizers are suddenly being sold on ebay for about five bucks)
So the question is whether this is still as difficult on the Herald as threads on the Hermes suggest?
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Any way to set up device after flash with no touch screen.
The digitizer or screen is not functioning, before i take it all apart as shown anybody no of a way to bypass the touchscreen setup.
before trying to change the digitizer...
(and i know this is crazy but worked for me after replacing the cable going from the screen to the board)
install a screen protector and try again!
I had the same problem after opening my Herald, and right now the screen only works if i have a screen protector on. If not then nothing happens
digitizer replacement is actually very easy.
Jeffreyr1 said:
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
Click to expand...
Click to collapse
As I have now posted on a different thread, the digitizer replacement is actually very easy. You just slip a razor blade under the tabs and lever it off after removing that yellow tape on the back.
moullas said:
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Click to expand...
Click to collapse
I agree. It was not difficult at all. I took apart and put together the phone a few times after just to develop a feel for it.
We have a tendency to get nervous about it but if you relax it becomes easier.
I have a a extra digitizer that I never used. If anyone wants it, pm me.
my htc hd touch screen not work just no touch ............. i mean no touch how to fixxxxxxxxxxxxxx
its same problem with mine as well, if your problem is solved c worked thank youan you please tell me know how it
Touch hd screen not responding to touch or stylus
Touch hd screen not responding to touch or stylus
--------------------------------------------------------------------------------
In early February I upgraded my Touch HD to 6.5 from 6.1 and if am right it was energy.blackstone.21891.leo_Max. It worked for about two week and and then one day I struggled to get a gps fix on my tomtom. The next day the screen just froze with no response of any touching or stylus.
Managed to put the original orange rom back on it but could not cariberate the screen due to its not responding. I sent the phone to HTC UK for repairs but they said due to my having used unauthorised software the motherboard needs to be replaced and they were asking me to pay 168 pounds so they could go ahead with the repairs. I got the HD2 on a new contract.
Still love the TOUCH HD and was wondering is there another way of breathing life into this thing. Responds well to install new roms but the screen continues to remain frozen
Hi, guys
HTC Touch HD is good telephone, but touch gets out unfortunately often. It in Poland is this the cheap part however exchange of such touch costs 2x price of touch.
I bought week this on internet auction telephone with damaged touch which now cannon. I paid in Poland for damaged telephone 300PLN (60GBP) as well as for touch + conversion 100PLN (20GBP). Mate which converted touch, he did this 3h. It is not easily because it was it been possible to damage near conversion display as well as tape. He wanted me to to count up to his work, abut did not make this because we earlier were already prearranged on price. I know now that it will take a bit more but display + conversion will not cross 150PLN (30GBP)! If someone will be dust telephones with damaged touch, I will hug it willingly, they are reparable
it seems everyone had Energyrom on HD when it goes to the heaven...
Is it because of Energyrom, or is Energyrom so popular?
I have Energy since I have this HD, but never was any problem with it - until now... I'll try to find a way to replace the digitizer, hope it will solve the problem.
mchaals said:
it seems everyone had Energyrom on HD when it goes to the heaven...
Is it because of Energyrom, or is Energyrom so popular?
I have Energy since I have this HD, but never was any problem with it - until now... I'll try to find a way to replace the digitizer, hope it will solve the problem.
Click to expand...
Click to collapse
Well, I rather think it's because the EnergyRom is so popular So the bigger coincidence from my point of view is that all our devices break down at nearly the same time! Mine, e.g. is nearly 2 years old - all the other devices presumably around this age too...
I'm now changing the digitizer and LCD (as the LCD got broken when removing the digitizer )
abnonta said:
Well, I rather think it's because the EnergyRom is so popular So the bigger coincidence from my point of view is that all our devices break down at nearly the same time! Mine, e.g. is nearly 2 years old - all the other devices presumably around this age too...
I'm now changing the digitizer and LCD (as the LCD got broken when removing the digitizer )
Click to expand...
Click to collapse
Mine is 2 years old as well, but this problem (touch screen not responding) occurred to me the third time by now. Also, it has nothing to do with the ROM, since I had stock every time it happened. (yes, after two years I am finally getting around to change ROM in my device. it's just sad).
I suspect a dead digitilizer, you can get them cheaply on eBay
Sent from my GT-P1000 using XDA App
Hi, I'm Martin from Germany
That's the story:
I've (already ) broke the display of my HTC Mozart after 2 months of usage ordered a new one at mobile-phone-lcd.com. The replacement itself took me about two hours, where the longest part was the removal of the "old" glue which is used to keep the screen in its housing.
But now the reaction of the screen is very bad It's 1. the typical "lockscreen problem" but 2. the menu often scrolls "up" when i push the screen down. And I'm unable to write messages because I can't touch some letters.
But I have to note that starting from the point when i broke my old screen, the phone "already" had the "lockscreen problem" and a few letters were not touchable.
With the new screen the "touchability" is worse than with the broken screen.
I already flashed it with RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50 but nothing changed. I just wrote an email to the seller but somehow I can't believe that's a harware-related problem. I already tried to run it with different positions of the cable in the plug... no success
Maybe anyone of you has similar experiences or any ideas how to fix it. Tomorrow I'll try to flash it with another ROM.
Cheers
Martin
It really seems an issue with the new screen, a bad device or both...
I don't think you can repair it playing with the ROM...
Thanks.
Let's see what the supplier says...
first of all you info was not clear, when you mention screen, is' it the LCD or the digitizer, it's two different pieces, it seems like the problem is the digitizer.
You're right, the problem is the digitizer.
The support-team already answered and needs a more detailed description. (I wrote a very short email) The guy answered that I should try a touch screen calibration! I've already searched for a way to calibrate the touch screen/digitizer, but I wasn't successful. Does anyone of you knows how to?
In parallel I'm bidding on a HTC Mozart on eBay which is water damaged so I can try another digitizer. (hope the digitizer is still working...)
how much is it going to cost, i've seen oem digitizer in china go for around USD 30.
also no touch calibration will do any good, the digitizer has some dead section, from your description.
Mine was 38 USD without shipping costs
Currently the damaged WP7 is @ 30 USD....
You're right. Where have you seen the digitizer? Could you provide the link to me?
Krotti said:
Mine was 38 USD without shipping costs
Currently the damaged WP7 is @ 30 USD....
You're right. Where have you seen the digitizer? Could you provide the link to me?
Click to expand...
Click to collapse
they dont do mail order, i visit china every week, so i know all the prices.
the lcd screens go for USD 31, alot cheaper than even ebay or online stores.
cool
I just found one for USD 30 via eBay (also from china )
many thanks!
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
https://www.youtube.com/watch?v=wl2aK5wCBAI
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Cheers
Click to expand...
Click to collapse
Goodluck https://www.witrigs.com/oem-screen-replacement-with-frame-for-xiaomi-mi-mix-3-black
Hi, i searched on aliexpress, there are lots of options but it is $100+, so in my case I ordered 6.39 lcd display, and it looks better than other analogs, costs 45 usd but it has a special plastic spacer under the display, so it sticks up a bit more, looks fine... On aliexpressI think itis 3 options lcd, led and amoled... No clue what is the one in middle. I bought mine from chila lcd seller
Upd: I think 100+ is for original there, not 'oem', but not sure
I try to order one (100+$) but the quality was awefull. some part of the screen was unreponsive.
I bought one from second hand market. Under warranty and never opened for -300$
I had the same problem, dropped my phone and screen replaced with original. Contact with this adress maybe you can order original one. Genpa is authorized service in Türkiye for Xiaomi.
https://www.genpa.com.tr/hakkimizda/eng
https://www.genpa.com.tr/iletisim-formu
I bought the witrigs one. It certainly seems genuine to me. I'm happy.
I had a honor 8 before, I'd say I bought 6-8 screens for it and never found a good one
Specialosio said:
Hello, there.
Unfortunately, I've dropped my mi mix 3 and I was looking to a new screen.
Looking around I've found many offers with a wide range of prices.
The question is that the Mi Mix 3 feature a Samsung Amoled 6.39 inch but it is impossible to find, everywhere I'm finding an LCD replacement. Can someone help me out?
Plus, I was a bit worried about the screen replacement procedure but then I saw this video which takes a totally different approach and made the whole thing much easier...
Still, I can't find the Amoled version anywhere but only the LCD version...
Cheers
Click to expand...
Click to collapse
Where do you find LCD? I can't even Find it. (I hate amoled with their burn in issues. I love lcd)
Any existing Mix 3 users that had to replace the screen in the past?
Which one did you buy and that you are satisfied with it?
Honestly I don't know which one to look at (primarily I am looking on ebay). There are some that the title say it's amoled, but I am not sure.
Any advice?
I bought the original amoled screen in aliexpress for 80€.
Happy with it!
Hello,
My ZUK Z2 fell from a small height and the touch screen has the usual issue that works only for 2 sec after unlocking.
Can you suggest where to get a new Screen-Digitizer asembly; I wan a genuine one or one that is the closest possible to genuine. I have heard stories that some screens from aliexpress do not support multitouch and the LCD colors are off.
Can you suggest anything tested that ships to EU? (Greece).
Thank you
No one has ever changes a screen in this phone? Come on guys! Don't be shy! ;-)