Related
OK. Firstly, I have extensive experience with rooting moto droids and custom roms. That said I got cocky and didn't do enough homework trying to root my girls Eris and proceeded following the instructions in the "1.5 to rooted 2.1" thread. Step 1 went fine. I THINK I have root access. Anyway, like I was tired and couldn't get adb shell working so I left it at that with intent to finish today when I get home from work. Now she's telling me her icons are different and some are linking to different programs. Any ideas? Second, can someone point me in the direction of an adb shell how to, on my Droid I can just use terminal emulation and don't actually need a computer so I'm not too familiar with the process... sorry for the stupid newborn questions, don't pull the flame throwers out yet, thanks!
You can use terminal emulator, same thing for the most part as adb... I use that more then adb, faster then having to connect to a pc IMO.
I tried the terminal emulator and got adb not found or not allowed or some craziness like that. Does that mean I didn't root like I thought? Also, any clue about the icon s changing or linking to other apps like shes claiming? I'm going to try again when she gets home
In the terminal emulator you would not need to type adb.. adb is the program you would be using on a pc to talk to the phone... what is it that you are trying to type through adb or the terminal?
III: Flashing a Custom Recovery
Flashing a custom recovery will make your life easier when flashing ROMs in the future.
1. Download this file: Recovery.zip
2. Extract file contents to your \tools\ directory of your Android SDK.
3. Open up a command prompt and go to your tools directory, and execute these commands:
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
4. Success! You now have a recovery partition installed on your phone. You can access it by running "adb shell reboot recovery" or by powering off your phone, holding "Volume Up + Power On"
step 3. im an ass. ok so dont type the adb. like i said, not much exp in this part... im guessing i dont tye shell either, but i do type mount?
evilsway said:
III: Flashing a Custom Recovery
Flashing a custom recovery will make your life easier when flashing ROMs in the future.
1. Download this file: Recovery.zip
2. Extract file contents to your \tools\ directory of your Android SDK.
3. Open up a command prompt and go to your tools directory, and execute these commands:
adb shell mount -o rw,remount /dev/block/mtdblock3 /system
adb push recovery.img /sdcard
adb push flash_image /system/bin
adb shell chmod 755 /system/bin/flash_image
adb shell flash_image recovery /sdcard/recovery.img
4. Success! You now have a recovery partition installed on your phone. You can access it by running "adb shell reboot recovery" or by powering off your phone, holding "Volume Up + Power On"
step 3. im an ass. ok so dont type the adb. like i said, not much exp in this part...
Click to expand...
Click to collapse
Oh I see, for that yes you will need to get the SDK setup on your PC as per step 2... There is another thread that has a batch file that does all of this for you. You still need the SDK though.
see: http://forum.xda-developers.com/showthread.php?t=651669
ok, i have the sdk, i followed these instructions to the letter, and i still couldnt get it running last night, where in the sdk do i do this from or is it a command promp, or can i use the terminal emulator?
yes in the command prompt, typically adb.exe will be in your tools folder.
also, and i know im being a pain now, but by adb does it mean the adb in the tools directory of the sdk, i click it and it runs a script then dissapears.
evilsway said:
also, and i know im being a pain now, but by adb does it mean the adb in the tools directory of the sdk, i click it and it runs a script then dissapears.
Click to expand...
Click to collapse
yes, adb needs to be ran through the command prompt, if you click on it in windows it wont work... read the thread I linked you to, you wont need to run adb if you use that method, it does it all for you.
yeah im downloading the file now, but im just curious, now i want to be able to do it just to do it. i hate when i cant figure crap like this out,
so far ive done this, opened command promp, put in C:\androidsdk\android-sdk-windows\tools\adb.exe and it runs a script then nothing
evilsway said:
yeah im downloading the file now, but im just curious, now i want to be able to do it just to do it. i hate when i cant figure crap like this out,
so far ive done this, opened command promp, put in C:\androidsdk\android-sdk-windows\tools\adb.exe and it runs a script then nothing
Click to expand...
Click to collapse
go to start, run and type cmd and enter. then in that window
you have to change to the tools directory at the command prompt like so"
cd androidsdk\android-sdk-windows\tools
then type adb
Renocat said:
go to start, run and type cmd and enter. then in that window
you have to change to the tools directory at the command prompt like so"
cd androidsdk\android-sdk-windows\tools
then type adb
Click to expand...
Click to collapse
Yeah, once you do what he states and type...
cd androidsdk\android-sdk-windows\tools ... or where ever you have your SDK saved at on your computer ... you should be good to start running those scripts in the directions.
I'm hoping someone can help with a minor annoyance. Anytime I try to look up a page on wikipedia be it in an app or a browser the app/browser crashes once it loads abou 75%. This is with standard android settings and even when I go about:debug and select desktop.
Has anyone else had this problem and/or know how to fix it?
Found this.. haven't tried it yet..
http://forum.pocketables.net/showthread.php?t=9195
duckydan said:
I'm hoping someone can help with a minor annoyance. Anytime I try to look up a page on wikipedia be it in an app or a browser the app/browser crashes once it loads abou 75%. This is with standard android settings and even when I go about:debug and select desktop.
Has anyone else had this problem and/or know how to fix it?
Click to expand...
Click to collapse
The link Vince provided works. In case, you or anybody else looking to fix this haven't tried using adb before, my hard learnt steps are
1. Get the Android SDK for the platform tools
2. Extract the two libskia files into the same folder as the adb.exe (there are some older instructions that says adb.exe is in /tools but it's been moved to /platform-tools)
3. Put your Streak into "Recovery Mode" -> hold down both volume buttons while booting up.
- Then select option 2: Install an update package. I'm not sure what you will see next because I had StreakMod installed at this point but it shouldn't matter.
4. On your PC, follow the instructions in the pocketables post... but it might not work.
Remounting manually
5. On mine, adb remount does not work. So I had to remount manually. I'll recommend you use two command windows for the following. One for your PC/Mac shell and another for the Streak's shell through ADB.
5a. run "adb shell" to get into the Streak shell
5b. run "mkdir /tmp/system" to create a mount point
5c. run "mount -o rw -t yaffs2 /dev/block/mtdblock6 /tmp/system"
- Note: I think the mtdblock6 is the standard block device for the internal SD on the Streak but just in case, make sure that it's the correct by checking if the files are there by running "ls /tmp/system/libskia*", you should see two files listed.
5d. Exit the adb shell or switch to the PC window if you're using two windows.
5e. On your PC run "adb push libskia.so /tmp/system" and "adb push libskiagl.so /tmp/system"
5e. Back in the adb shell, verify that the files have been pushed correctly by running the ls command again. The two files should be dated around 2/3 Feb depending on your time zone I think. MOST importantly, check that libskiagl.so are all in small caps and NOT libskiaGL.so. Otherwise, you'll end up with a Streak that doesn't boot past the Dell logo.
5f. If you have the libskiaGL.so name instead. Rename the file properly by using the mv command "mv /tmp/system/libskiaGL.so /tmp/system/libskiagl.so". Double check the renaming worked.
5g. Reboot and it should work.
[Q] will this work to un install the root on atrix?
Originally Posted by Chromag View Post
I think you would have to follow the initial directions listed in the "How to Enable Sideloading" sticky thread and instead of copying files you would be removing them. Something like this:
DISCLAIMER: I HAVE NOT TRIED THIS AND CANNOT GUARANTEE IT WILL WORK AND WILL NOT BRICK YOUR PHONE (but I'm pretty sure it won't)
I borrowed the first and last parts of the directions from the sideload thread.
You'll need the Android SDK (guide to download and install is here)
You'll need the USB drivers (Stickied post in this forum)
You'll need root access (look for the Captivate Root thread by chaoscentral)
You'll need Busybox (available on the market after you root the phone)
Connect USB to phone with USB Debugging ON
Command prompt
cd to SDK install directory
cd tools
adb shell
su
rm /system/app/Superuser.apk
rm /system/xbin/busybox
rm /system/xbin/su
exit
exit
Then reboot the phone. I THINK that should do it. It should at least remove the superuser ninja icon and not make it obvious that it's been rooted. Hopefully there's an easier way to do it but in my initial googling yesterday I didn't see anything very helpful.
Wrong Forum, try Q/A.
Hello,
I try to run Backtrak5 on my photon, every thing is ok, but when i have to browse to the sd card to make the boot with the terminal emulator i can cd the sdcard-ext,
i try to do this:
su
cd /sdcard/BT5 <--------(here is where i have the problem, cant access)
sh bootbt
export USER=root
vncpasswd
(make up any password)
i follow the instructions of this :
https://www.facebook.com/notes/opensourcegangster/how-to-run-backtrack-5-on-android/372480502807728
I will apreciate any help,
Thank´s a lot in advance.
cd /sdcard-ext/BT5
If you get a grey screen with an X when you VNC into it, try another ROM/Kernel combo. It's seems to be an Atrix/Photon thing.
Hi,
Did a search and someone said they were able to root with thecubed method on Mac via Terminal, but I've had no luck so far. Are there any other options for us Mac users?
Thanks
BTW I did see some instructions but it only applies to Verizon. I have the international version D802.
Any help would be greatly appreciated.
use virtual machine and use windows?
I haven't found any easy way to do it, other that running bootcamp and windows on the mac..
You can do it via adb just fine on osx (I'm on snow leopard). You can check which commands to run by opening the Windows script as a text document. It's easy to follow what's going on and has sections for each device
xdabbeb said:
You can do it via adb just fine on osx (I'm on snow leopard). You can check which commands to run by opening the Windows script as a text document. It's easy to follow what's going on and has sections for each device
Click to expand...
Click to collapse
I opened root.bat as a text file but as far as how to input the commands I'm not sure what to do as it seems to differs from the video. Sorry I'm not that familiar working with Terminal.
If you could help out that would be great.
Thanks
xdabbeb said:
You can do it via adb just fine on osx (I'm on snow leopard). You can check which commands to run by opening the Windows script as a text document. It's easy to follow what's going on and has sections for each device
Click to expand...
Click to collapse
Ahhhhh! You know Mavericks is free, right? UPGRADE THAT THING!
On another note... same issue w/ me. I ended up rooting it via my PC, but after that you can use Android File Transfer to manage files and load roms and stuff via OSX.
sell ur POS apple and get a pc...?
digitard said:
Ahhhhh! You know Mavericks is free, right? UPGRADE THAT THING!
On another note... same issue w/ me. I ended up rooting it via my PC, but after that you can use Android File Transfer to manage files and load roms and stuff via OSX.
Click to expand...
Click to collapse
Ha! I haven't upgraded because I still feel snow leopard is the best. I don't like how they've integrated so much ios in the last two, and SL is lean/efficient.
If I have some time I'll write down the commands in a reply. Do you have adb already set up?
xdabbeb said:
Ha! I haven't upgraded because I still feel snow leopard is the best. I don't like how they've integrated so much ios in the last two, and SL is lean/efficient.
If I have some time I'll write down the commands in a reply. Do you have adb already set up?
Click to expand...
Click to collapse
Yes already have adb set up. Thanks for this. Really appreciate it.
No problem. What version of the G2 do you have?
---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
Ignore that, I just saw you mentioned the international version
OK, here you go:
1) Go here here and here and thank them both for their work...and read their disclaimers about breaking your phone. The same applies here.
2) Download the attached archive and extract the contents into whatever folder you want...for the purposes of this I'll assume you did so to a directory called ~/D802_OSXroot. If you chose a different directory, modify the steps below accordingly. The archive I attached only contains the appropriate file for the international (D802) LG G2, and I used Chainfire's SuperSU instead of the older ChainsDD su binary and apk. While you're at it, go here and thank him.
3) Make sure USB Debugging is enabled on your phone in Settings>Developer Options
4) Connect your phone via usb cable. You'll get the popup asking what type of connection on your phone. Select Internet connection and then Ethernet when asked. You should see the debugging icon in the status bar of your phone
5) Open terminal on your mac
6) To verify that you are properly connected run the following command:
Code:
adb shell "ls -a /"
you should see the contents of the root of your phone...inlcuding a number of init files. If you do, proceed. If you don't, you have an adb/connection problem.
7) Execute the following in the terminal window to go to the directory where the archive has been extracted on your mac:
Code:
cd ~/D802_OSXroot
8) Execute the following to push the loki exploit file to your phone
Code:
adb push ./g2_security /sdcard/g2_security
9) Unplug your usb cable from the phone
10) On your phone go to Settings>Developer Options and disable USB Debugging
11) Re-enable USB Debugging
12) Plug in your USB cable (follow step 4)
13) Verify adb connectivity (follow step 6)
14) Go back to your terminal window, make sure you are still in the same directory with the files from the archive and execute the following commands in order:
Code:
adb shell "mount -o remount,rw /system"
Code:
adb push ./su /system/xbin/su
Code:
adb shell "chown 0.0 /system/xbin/su;chmod 06755 /system/xbin/su;sync;mount -o remount,ro /system"
Code:
adb install superuser.apk
15) Launch the SuperSU app on your phone. It will likely prompt you to update the su binary...let it do so and then reboot your phone. You should be rooted now.
Good luck!
xdabbeb said:
OK, here you go:
1) Go here here and here and thank them both for their work...and read their disclaimers about breaking your phone. The same applies here.
2) Download the attached archive and extract the contents into whatever folder you want...for the purposes of this I'll assume you did so to a directory called ~/D802_OSXroot. If you chose a different directory, modify the steps below accordingly. The archive I attached only contains the appropriate file for the international (D802) LG G2, and I used Chainfire's SuperSU instead of the older ChainsDD su binary and apk. While you're at it, go here and thank him.
3) Make sure USB Debugging is enabled on your phone in Settings>Developer Options
4) Connect your phone via usb cable. You'll get the popup asking what type of connection on your phone. Select Internet connection and then Ethernet when asked. You should see the debugging icon in the status bar of your phone
5) Open terminal on your mac
6) To verify that you are properly connected run the following command:
Code:
adb shell "ls -a /"
you should see the contents of the root of your phone...inlcuding a number of init files. If you do, proceed. If you don't, you have an adb/connection problem.
7) Execute the following in the terminal window to go to the directory where the archive has been extracted on your mac:
Code:
cd ~/D802_OSXroot
8) Execute the following to push the loki exploit file to your phone
Code:
adb push ./g2_security /sdcard/g2_security
9) Unplug your usb cable from the phone
10) On your phone go to Settings>Developer Options and disable USB Debugging
11) Re-enable USB Debugging
12) Plug in your USB cable (follow step 4)
13) Verify adb connectivity (follow step 6)
14) Go back to your terminal window, make sure you are still in the same directory with the files from the archive and execute the following commands in order:
Code:
adb shell "mount -o remount,rw /system"
Code:
adb push ./su /system/xbin/su
Code:
adb shell "chown 0.0 /system/xbin/su;chmod 06755 /system/xbin/su;sync;mount -o remount,ro /system"
Code:
adb install superuser.apk
15) Launch the SuperSU app on your phone. It will likely prompt you to update the su binary...let it do so and then reboot your phone. You should be rooted now.
Good luck!
Click to expand...
Click to collapse
Has anyone tried this method?
Sent from my LG-D802 using Tapatalk
xdabbeb said:
OK, here you go:
1) Go here here and here and thank them both for their work...and read their disclaimers about breaking your phone. The same applies here.
2) Download the attached archive and extract the contents into whatever folder you want...for the purposes of this I'll assume you did so to a directory called ~/D802_OSXroot. If you chose a different directory, modify the steps below accordingly. The archive I attached only contains the appropriate file for the international (D802) LG G2, and I used Chainfire's SuperSU instead of the older ChainsDD su binary and apk. While you're at it, go here and thank him.
3) Make sure USB Debugging is enabled on your phone in Settings>Developer Options
4) Connect your phone via usb cable. You'll get the popup asking what type of connection on your phone. Select Internet connection and then Ethernet when asked. You should see the debugging icon in the status bar of your phone
5) Open terminal on your mac
6) To verify that you are properly connected run the following command:
Code:
adb shell "ls -a /"
you should see the contents of the root of your phone...inlcuding a number of init files. If you do, proceed. If you don't, you have an adb/connection problem.
7) Execute the following in the terminal window to go to the directory where the archive has been extracted on your mac:
Code:
cd ~/D802_OSXroot
8) Execute the following to push the loki exploit file to your phone
Code:
adb push ./g2_security /sdcard/g2_security
9) Unplug your usb cable from the phone
10) On your phone go to Settings>Developer Options and disable USB Debugging
11) Re-enable USB Debugging
12) Plug in your USB cable (follow step 4)
13) Verify adb connectivity (follow step 6)
14) Go back to your terminal window, make sure you are still in the same directory with the files from the archive and execute the following commands in order:
Code:
adb shell "mount -o remount,rw /system"
Code:
adb push ./su /system/xbin/su
Code:
adb shell "chown 0.0 /system/xbin/su;chmod 06755 /system/xbin/su;sync;mount -o remount,ro /system"
Code:
adb install superuser.apk
15) Launch the SuperSU app on your phone. It will likely prompt you to update the su binary...let it do so and then reboot your phone. You should be rooted now.
Good luck!
Click to expand...
Click to collapse
Thanks for this. I'm having an issue at the first step. I have tested adb when I downloaded the SDK and if I direct the command ./adb devices to that specific folder it can read my phone, but just going into terminal and entering adb shell "ls -a /" al I get is -bash: adb: command not found
Also when I connect my phone to the mac I get options on the G2 but none are internet then ethernet. I get: Charge Phone, Media Sync, Tethering, LG Software, Send Images. The Mac does not ask me what connection I want.
ck37 said:
Thanks for this. I'm having an issue at the first step. I have tested adb when I downloaded the SDK and if I direct the command ./adb devices to that specific folder it can read my phone, but just going into terminal and entering adb shell "ls -a /" al I get is -bash: adb: command not found
Also when I connect my phone to the mac I get options on the G2 but none are internet then ethernet. I get: Charge Phone, Media Sync, Tethering, LG Software, Send Images. The Mac does not ask me what connection I want.
Click to expand...
Click to collapse
It sounds like the first issue may just be due to you not having adb set up properly. If you execute "echo $PATH" in terminal and don't see the android/tools and android/platform-tools directories there, that's the problem. You can either set your path variable to include those directories or just edit the commands I listed accordingly.
The second issue may be due to a difference in the D802 rom vs the VS980. The important thing is that USB Debugging is enabled and that you can access your phone via adb. The 802 may not prompt you in the same way, but if you fix your adb setup the commands will work the same. The rooting method listed (which is the same as thecubed method) is predicated on that working properly.
xdabbeb said:
It sounds like the first issue may just be due to you not having adb set up properly. If you execute "echo $PATH" in terminal and don't see the android/tools and android/platform-tools directories there, that's the problem. You can either set your path variable to include those directories or just edit the commands I listed accordingly.
The second issue may be due to a difference in the D802 rom vs the VS980. The important thing is that USB Debugging is enabled and that you can access your phone via adb. The 802 may not prompt you in the same way, but if you fix your adb setup the commands will work the same. The rooting method listed (which is the same as thecubed method) is predicated on that working properly.
Click to expand...
Click to collapse
I think I figured it out. What I did was transfer the ADB icon from my SDK folder into this one. From there I was able to get access to adb inside the D802 folder. I did have to enter the ./adb as opposed to adb though.
As for the LG I selected tethering as that seemed to be the option similar to the internet/ ethernet choice you mentioned.
All other commands worked accordingly.
Binaries updated for SuperUser as well. At this point how do I get into recovery to upload ROMS etc?
ck37 said:
I think I figured it out. What I did was transfer the ADB icon from my SDK folder into this one. From there I was able to get access to adb inside the D802 folder. I did have to enter the ./adb as opposed to adb though.
As for the LG I selected tethering as that seemed to be the option similar to the internet/ ethernet choice you mentioned.
All other commands worked accordingly.
Binaries updated for SuperUser as well. At this point how do I get into recovery to upload ROMS etc?
Click to expand...
Click to collapse
What I did was installed flashify from the market. This app allows you to backup and then flash a new recovery. Make sure you dl the right one for your device!
Sent from my LG-VS980 using Tapatalk