Hello to everyone!
I have problem about my Tytn (Hermes 200) that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it -for example to change that connector with a new one (because I have another Tytn with usb port broken but that connector is ok)? Does anyone know how to do so? I really need help...
thanks in advance
or if someone know where I can find a new motherboard cheap?
Stop making same new therds.
Motherboard - start serching on ebay or othet web-auction.
If you want to rapier it just send it to service, if you asking probably you don`t have skills to do it.
There no another option!
Hi Ana*
I know it's been a while i just came across this, did you have any luck? or at least better luck than the useless barf that czarnyrafal spewed?
I got a similar response from another xda member over an exact problem,
at that point i gave up asking for advice from these greater than god ppl and almost a year later found a Herme200 for parts and have a few extra, if you still need
Related
does anyone have something like this which i can buy?
hello, i have an xda mini s and it is bricked but the display is in perfect working order, i would have to sell the phone as a whole item as i am not technical enough to take it apart, but for the whole packeage it would be very cheap, regards
LCD
http://www.mobilephonerepairs.co.uk/index.asp
Try this site re your LCD
ouuups ...
Wrong thread ..
http://www.pocketpctechs.com/
(Half my posts seem to be for this company, but I don't work for them, honest! I should probably get commission though..)
Edit: I created a thread for hardware parts and servicing: http://forum.xda-developers.com/showthread.php?t=303975
Try http://www.displaydoctor.co.uk.
Only the TD028STEB1's are listed at the moment, but I'm due to receive LTP280QV-E01's tomorrow.
Also, check for seller gccompt on ebay.
HTH.
i'm looking for a main cpu board off a blackstone, who can help me ?
Not sure which one is main board as there really 2, but try this one on ebay auction 170408817615. they are used but its a option.
I have one crashed hd but dont know is motherboard still live
vidojajce
I post you a private message
vidojajce said:
I have one crashed hd but dont know is motherboard still live
Click to expand...
Click to collapse
Hello!
what is wrong with your phone? what it would sell and for how much?
look in pm
I'm also looking into motherboard. Does anybody have idea where I can find it?
Me too...
The only place I've managed to find one is here:
http://www.htcrepairparts.com/htc-touch-hd-c-129_220.html?language=en
But $US295 seems a little steep. Anyone else have any tips or a busted phone they want to dispose of?
htcrepairparts unfortunately is a little steep in prices indeed.
mainboard
I have mainboard.location-bulgaria skype-bezstra6en
Hello, I have such board, if interested send me PM. I'm located in Belgium but can send it over post mail, UPS or (KIALA only in Belgium)
Hi guys i have a question.My digitizer is broken so what is better reparing it or buying an other phone? The repair cost in Poland is 400 zł,or i can buy the lcd+digitizer for 200 zł (pln) and try to repair it myself.This is for me very important,this phone is great but the 400 zł for repair is too much for me.For 400 zł i can buy a anotcher maybe better phone,one part of phone is more expensive than the whole phone.The phone about i'm writting is xperia mini pro sk17i.Thank for help and sorry for long post.
Please just search for that, there are some threads about that
Just in short: It's very hard, digitizer+touch are one unit and there's not a single good tutorial for exchanging the unit (the only one I know is on iFixit)... it's very sad
You doesn't understand me correctly i'm asking what is better buying a new phone or reparing it.I've searched for anotcher threads before i maked this.I just found a thread about chow to chance broken screen.I know how to chance it on you tube is a toutrial chow to do this.
Hello i have a damaged usb flex cable in my i777... The phone won't charge and otg does not work. I had my local change it 2 weeks ago amd it seems i wasted my $35 for nothing. I am looking for the usb flex compatible with i777 and cheaper... I found those:
http://www.ebay.com/itm/290717679915?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.com/itm/Dock-Connec...e_Replacement_Parts_Tools&hash=item3cd9c0dd17
http://www.ebay.com/itm/Charging-Po...d=100005&prg=1088&rk=3&rkt=4&sd=111239745950&
Which one do you recommend?
Reply fast as i have no phone to use and i need to repair it myself asap.if you can find one cheaper that would work fine plz post the links... (I buy on ebay only)
I really can't answer your question definitively. I have read several posts by people who have tried installing the I9100 replacement part and found it did not work correctly in the I777, and then subsequently purchased the right part and it did work. I would guess that all three of the ones you listed will not work, but I think you will have to do a little more research to find out the part number for the correct part. You should be able to find the information since others have found it and posted about it.
Sorry I couldn't be more helpful.
creepyncrawly said:
I really can't answer your question definitively. I have read several posts by people who have tried installing the I9100 replacement part and found it did not work correctly in the I777, and then subsequently purchased the right part and it did work. I would guess that all three of the ones you listed will not work, but I think you will have to do a little more research to find out the part number for the correct part. You should be able to find the information since others have found it and posted about it.
Sorry I couldn't be more helpful.
Click to expand...
Click to collapse
i searched and read a lot on xda...and i found a lot of people had success with i9100 flex cable on i777....just to be sure i can buy the flex on ebay that says compatible for i777 and try it...if it does not work i can contact the seller and tell him it did not match the description.
P.S there are a lot of usb flex with different code on them....rev2.2, rev2.3...2.4 etc....which one do i need?
some people posted rev2.2 did the trick while others sounded completely sure 2.2 does not work and 2.3\2.4 worked for them....who do i believe?
This is the broken cable in my s2....should i use the same part rev2.2 to replace it?
mmystere68 said:
This is the broken cable in my s2....should i use the same part rev2.2 to replace it?
Click to expand...
Click to collapse
Well, ignore what I said in the previous post and pay attention to people who have actually replaced their usb port. I have no first hand experience with this since my usb port has worked flawlessly for 2 plus years. Evidently, my memory of what I have read about usb port replacement here on the forums during the past two years is not accurate either.
creepyncrawly said:
Well, ignore what I said in the previous post and pay attention to people who have actually replaced their usb port. I have no first hand experience with this since my usb port has worked flawlessly for 2 plus years. Evidently, my memory of what I have read about usb port replacement here on the forums during the past two years is not accurate either.
Click to expand...
Click to collapse
i bought this one : http://www.ebay.com/itm/121218391064?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
will see how it goes...i bought this because it looked real similar to the original one.
Hi,
I made the mistake to believe that my Poco F1 is water resistant and I got my Motherboard fried. Sent it to a repair shop, can do nothing except a replacement. there was a fried capacity at the bottom and unless someone can provide me with a datasheet to try and fix it, I'll need you people to help me find one.
I've checked aliexpress and google, I can't find it !
Thank you a lot,
anerty said:
Hi,
I made the mistake to believe that my Poco F1 is water resistant and I got my Motherboard fried. Sent it to a repair shop, can do nothing except a replacement. there was a fried capacity at the bottom and unless someone can provide me with a datasheet to try and fix it, I'll need you people to help me find one.
I've checked aliexpress and google, I can't find it !
Thank you a lot,
Click to expand...
Click to collapse
New mobo = new phone. It's bettee to sell the parts and buy a new and/or a different phone. Or yo can wait until they are available on websites like AliExpress.
Btw, did you check the official Xiaomi service centre ?
>> Btw, did you check the official Xiaomi service centre ?
No, how to contact them ? the website turn Chinese and I can't find a way to turn it English.
anerty said:
>> Btw, did you check the official Xiaomi service centre ?
No, how to contact them ? the website turn Chinese and I can't find a way to turn it English.
Click to expand...
Click to collapse
Where did you buy the phone ? Did you import it ?
anerty said:
Hi,
I made the mistake to believe that my Poco F1 is water resistant and I got my Motherboard fried. Sent it to a repair shop, can do nothing except a replacement. there was a fried capacity at the bottom and unless someone can provide me with a datasheet to try and fix it, I'll need you people to help me find one.
I've checked aliexpress and google, I can't find it !
Thank you a lot,
Click to expand...
Click to collapse
Hey man,
I'm dealing with a similar situation right now having a poco motherboard with a capacitor missing.
Let me know which one you have fried and I can take that one off of mine, measure it and point you to a spare part.
Here's my thread.
I bought it online from aliexpress
Derpthunder said:
Hey man,
I'm dealing with a similar situation right now having a poco motherboard with a capacitor missing.
Let me know which one you have fried and I can take that one off of mine, measure it and point you to a spare part.
Here's my thread.
Click to expand...
Click to collapse
I don't have access to it right now, I'll update you once I get it.
Is save to replace my motherboard ? Pls give me ans pls
Wath is your budgets ??
I can help with that
anerty said:
Hi,
I made the mistake to believe that my Poco F1 is water resistant and I got my Motherboard fried. Sent it to a repair shop, can do nothing except a replacement. there was a fried capacity at the bottom and unless someone can provide me with a datasheet to try and fix it, I'll need you people to help me find one.
I've checked aliexpress and google, I can't find it !
Thank you a lot,
Click to expand...
Click to collapse
I can buy the motherboard from India and can send it by courier to ur place.
check this mi.com/in/service/sparepartsprice
this is an official chart available...I wanna replace my battery they asked 2,900/- INR this week I will go and get the only battery I don't need the service. if you want I can check for you or can give the number of service centers +91 80 4112 7908.
One post removed.
No selling of anything is permitted on xda!
:good:
I solve your problem call me 7900121268