I have a build environment that works fine when building Froyo, but when I pull down the Eclair repo from Cyanogen and try to build it for my Passion/NexusOne, it dies on BusyBox. Even if I fix the BusyBox errors below by hand modifying the code, my build still ends at "kernel-msm"... am I missing something? I have followed the instructions from the Cyanogen Wiki to a tee multiple times now, and no dice.
Thanks!
debug output:
host Executable: yuv420sp2rgb (out/host/linux-x86/obj/EXECUTABLES/yuv420sp2rgb_intermediates/yuv420sp2rgb)
true
host Executable: zipalign (out/host/linux-x86/obj/EXECUTABLES/zipalign_intermediates/zipalign)
target StaticLib: libc (out/target/product/passion/obj/STATIC_LIBRARIES/libc_intermediates/libc.a)
true
host SharedLib: libacc (out/host/linux-x86/obj/lib/libacc.so)
target thumb C: libbusybox <= external/busybox/shell/ash.c
target thumb C: libbusybox <= external/busybox/shell/math.c
external/busybox/shell/ash.c: In function 'subevalvar':
external/busybox/shell/ash.c:6163: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c:6324: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c:6326: warning: pointer of type 'void *' used in arithmetic
external/busybox/shell/ash.c: In function 'printlim':
external/busybox/shell/ash.c:12714: error: 'rlim_t' undeclared (first use in this function)
external/busybox/shell/ash.c:12714: error: (Each undeclared identifier is reported only once
external/busybox/shell/ash.c:12714: error: for each function it appears in.)
external/busybox/shell/ash.c:12714: error: expected ';' before 'val'
external/busybox/shell/ash.c:12716: error: 'val' undeclared (first use in this function)
external/busybox/shell/ash.c: In function 'ulimitcmd':
external/busybox/shell/ash.c:12731: error: 'rlim_t' undeclared (first use in this function)
external/busybox/shell/ash.c:12731: error: expected ';' before 'val'
external/busybox/shell/ash.c:12792: error: 'val' undeclared (first use in this function)
make: *** [out/target/product/passion/obj/STATIC_LIBRARIES/libbusybox_intermediates/shell/ash.o] Error 1
make: *** Waiting for unfinished jobs....
cd external/busybox
git checkout d0194cfc47a71a65e049
Much obliged, Maxisma. That did it!
No problem ;-)
it should be fixed now. We made a Froyo branch.
Related
Code:
CC arch/arm/mach-msm/board-msm7627a-camera.o
arch/arm/mach-msm/board-msm7627a-camera.c: In function 'evb_camera_gpio_cfg':
arch/arm/mach-msm/board-msm7627a-camera.c:545: error: 'msm_camera_sensor_ov5647_data' undeclared (first use in this function)
arch/arm/mach-msm/board-msm7627a-camera.c:545: error: (Each undeclared identifier is reported only once
arch/arm/mach-msm/board-msm7627a-camera.c:545: error: for each function it appears in.)
arch/arm/mach-msm/board-msm7627a-camera.c:586: error: 'msm_camera_sensor_ov7692_data' undeclared (first use in this function)
arch/arm/mach-msm/board-msm7627a-camera.c: At top level:
arch/arm/mach-msm/board-msm7627a-camera.c:1051: error: 'msm_camera_sensor_ov8825' undeclared here (not in a function)
arch/arm/mach-msm/board-msm7627a-camera.c: In function 'msm7627a_camera_init':
arch/arm/mach-msm/board-msm7627a-camera.c:1195: error: 'ov7692_cam_req_gpio' undeclared (first use in this function)
arch/arm/mach-msm/board-msm7627a-camera.c:1195: error: request for member 'gpio' in something not a structure or union
arch/arm/mach-msm/board-msm7627a-camera.c:1196: warning: statement with no effect
error, forbidden warning: board-msm7627a-camera.c:1196
make[1]: *** [arch/arm/mach-msm/board-msm7627a-camera.o] Error 1
make: *** [arch/arm/mach-msm] Error 2
make: *** Waiting for unfinished jobs....
Can anyone help ?
check the include files
forumber2 said:
check the include files
Click to expand...
Click to collapse
Can u plz explain it ? I am not able to get u .
Sent from my S100 using Tapatalk HD
Workaround found
I am getting exactly the same error. But I managed a workaround. Use camera.c from ICS kernel.
1. Goto CAF
2. Choose ICS branch
3. Select any kernel
4. Goto kernels arch/arm/mach-msm/camera.c
5. Download it as raw.(there will be raw link along with tree and other links right under project head line)
6. copy it to same location as in above and paste it there. Make sure you make backup of earlier one.
Done. Worked for me. But you know what? I am now stuck at display.c and io.c . Its really hard without documentation....
Hey guys, sorry if i wasn't supposed to create a thread for this but i am getting this error
Code:
system/core/libion/ion.c: In function 'ion_alloc':
system/core/libion/ion.c:65:3: error: unknown field 'heap_mask' specified in initializer
system/core/libion/ion.c:67:17: warning: initialized field overwritten [-Woverride-init]
system/core/libion/ion.c:67:17: warning: (near initialization for 'data.flags') [-Woverride-init]
system/core/libion/ion.c: In function 'ion_sync_fd':
system/core/libion/ion.c:160:26: error: 'ION_IOC_SYNC' undeclared (first use in this function)
system/core/libion/ion.c:160:26: note: each undeclared identifier is reported only once for each function it appears in
system/core/libion/ion.c:162:1: error: control reaches end of non-void function [-Werror=return-type]
cc1: some warnings being treated as errors
make: *** [out/target/product/glacier/obj/EXECUTABLES/iontest_intermediates/ion.o] Error 1
Thats while compiling CM10.1
I have no idea what is up, i am tearing my hair out over it lol. Thanks in advanced for the help!
THEindian said:
Hey guys, sorry if i wasn't supposed to create a thread for this but i am getting this error
Code:
system/core/libion/ion.c: In function 'ion_alloc':
system/core/libion/ion.c:65:3: error: unknown field 'heap_mask' specified in initializer
system/core/libion/ion.c:67:17: warning: initialized field overwritten [-Woverride-init]
system/core/libion/ion.c:67:17: warning: (near initialization for 'data.flags') [-Woverride-init]
system/core/libion/ion.c: In function 'ion_sync_fd':
system/core/libion/ion.c:160:26: error: 'ION_IOC_SYNC' undeclared (first use in this function)
system/core/libion/ion.c:160:26: note: each undeclared identifier is reported only once for each function it appears in
system/core/libion/ion.c:162:1: error: control reaches end of non-void function [-Werror=return-type]
cc1: some warnings being treated as errors
make: *** [out/target/product/glacier/obj/EXECUTABLES/iontest_intermediates/ion.o] Error 1
Thats while compiling CM10.1
I have no idea what is up, i am tearing my hair out over it lol. Thanks in advanced for the help!
Click to expand...
Click to collapse
bump
anybody?
Hi Everyone
I am fairly new to android customisation, rooting, etc. and have been playing around with creating a custom CyanogenMod kernel to support a TP-Link USB wifi dongle.
The primary reference article for this can be found here - http://forum.xda-developers.com/showthread.php?t=2338179. However I have made some changes as listed below.
Keen to hack this further and any advice or guidance will be greatly appreciated.
Technical Spec:
Ubuntu 12.04 (32 Bit)
Samsung S3 (Cyanogenmod ROM)
Kernel = https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
.config = https://github.com/CyanogenMod/andr.../arch/arm/configs/cyanogenmod_i9300_defconfig
Note - There is no /proc/config.gz on my device, hence the above use of the config.
gcc-arm-linux-gnueabi libstdc++6 libncurses5 libncurses5-dev - exports correctly setup.
Objective
Getting an TP-Link TL-WN821N USB Wifi Dongle to work.
The relevant drivers are already available in mac80211 - http://www.aircrack-ng.org/doku.php?id=mac80211
Error Message
CC net/mac80211/agg-rx.o
CC net/mac80211/ibss.o
CC net/mac80211/mlme.o
net/mac80211/mlme.c: In function ‘ieee80211_mgd_auth’:
net/mac80211/mlme.c:2317:9: error: ‘struct cfg80211_auth_request’ has no member named ‘local_state_change’
net/mac80211/mlme.c: In function ‘ieee80211_assoc_done’:
net/mac80211/mlme.c:2419:2: warning: passing argument 2 of ‘cfg80211_send_rx_assoc’ from incompatible pointer type [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘struct cfg80211_bss *’ but argument is of type ‘unsigned char *’
net/mac80211/mlme.c:2419:2: warning: passing argument 3 of ‘cfg80211_send_rx_assoc’ makes pointer from integer without a cast [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘const u8 *’ but argument is of type ‘unsigned int’
net/mac80211/mlme.c:2419:2: error: too few arguments to function ‘cfg80211_send_rx_assoc’
include/net/cfg80211.h:2802:6: note: declared here
net/mac80211/mlme.c: In function ‘ieee80211_mgd_deauth’:
net/mac80211/mlme.c:2560:19: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2561:30: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2581:18: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2600:4: error: implicit declaration of function ‘__cfg80211_auth_canceled’ [-Werror=implicit-function-declaration]
net/mac80211/mlme.c:2610:16: error: ‘struct cfg80211_deauth_request’ has no member named ‘local_state_change’
cc1: some warnings being treated as errors
make[2]: *** [net/mac80211/mlme.o] Error 1
make[1]: *** [net/mac80211] Error 2
make: *** [net] Error 2
franna81 said:
Hi Everyone
I am fairly new to android customisation, rooting, etc. and have been playing around with creating a custom CyanogenMod kernel to support a TP-Link USB wifi dongle.
The primary reference article for this can be found here - http://forum.xda-developers.com/showthread.php?t=2338179. However I have made some changes as listed below.
Keen to hack this further and any advice or guidance will be greatly appreciated.
Technical Spec:
Ubuntu 12.04 (32 Bit)
Samsung S3 (Cyanogenmod ROM)
Kernel = https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
.config = https://github.com/CyanogenMod/andr.../arch/arm/configs/cyanogenmod_i9300_defconfig
Note - There is no /proc/config.gz on my device, hence the above use of the config.
gcc-arm-linux-gnueabi libstdc++6 libncurses5 libncurses5-dev - exports correctly setup.
Objective
Getting an TP-Link TL-WN821N USB Wifi Dongle to work.
The relevant drivers are already available in mac80211 - http://www.aircrack-ng.org/doku.php?id=mac80211
Error Message
CC net/mac80211/agg-rx.o
CC net/mac80211/ibss.o
CC net/mac80211/mlme.o
net/mac80211/mlme.c: In function ‘ieee80211_mgd_auth’:
net/mac80211/mlme.c:2317:9: error: ‘struct cfg80211_auth_request’ has no member named ‘local_state_change’
net/mac80211/mlme.c: In function ‘ieee80211_assoc_done’:
net/mac80211/mlme.c:2419:2: warning: passing argument 2 of ‘cfg80211_send_rx_assoc’ from incompatible pointer type [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘struct cfg80211_bss *’ but argument is of type ‘unsigned char *’
net/mac80211/mlme.c:2419:2: warning: passing argument 3 of ‘cfg80211_send_rx_assoc’ makes pointer from integer without a cast [enabled by default]
include/net/cfg80211.h:2802:6: note: expected ‘const u8 *’ but argument is of type ‘unsigned int’
net/mac80211/mlme.c:2419:2: error: too few arguments to function ‘cfg80211_send_rx_assoc’
include/net/cfg80211.h:2802:6: note: declared here
net/mac80211/mlme.c: In function ‘ieee80211_mgd_deauth’:
net/mac80211/mlme.c:2560:19: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2561:30: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2581:18: error: ‘struct cfg80211_deauth_request’ has no member named ‘bss’
net/mac80211/mlme.c:2600:4: error: implicit declaration of function ‘__cfg80211_auth_canceled’ [-Werror=implicit-function-declaration]
net/mac80211/mlme.c:2610:16: error: ‘struct cfg80211_deauth_request’ has no member named ‘local_state_change’
cc1: some warnings being treated as errors
make[2]: *** [net/mac80211/mlme.o] Error 1
make[1]: *** [net/mac80211] Error 2
make: *** [net] Error 2
Click to expand...
Click to collapse
Exactly the same issue here, bump :/
When I had to build a mac80211 driver (rt2800usb), I had to apply the following changes on top of cm-10.2.0 (d6f2f4ae4e593067dc59e2ac63f022434199f673):
Code:
# Depends on 3.4 backport that breaks mac80211.
git revert d6f2f4ae4e593067dc59e2ac63f022434199f673 # "Add support for Note 8 (N5100 and N5110)"
git revert c421809918b7106b40a81134f9fb5103146fc715 # "update bcmdhd driver from GT-9505 Source"
git revert 44655588a0b361afa15761b5c58f5a558c1c181c # "WIFI: Use kernel version 3.4 ifdef's."
git revert 3cedbff33e9884fdf3f7aaaa83ab9774d8145d1f # "wireless backport from 3.4"
# Another build fix:
Date: Sun Nov 24 12:04:33 2013 +0100
lib: fix compile of lib/genalloc.c
Taken from commit 3cedbff ("wireless backport from 3.4").
lib/genalloc.c | 54 ++++++++++++++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 22 deletions(-)
After that I was able to build rt2x00 from 3.4.70 (after enabling MAC80211 in config).. Note: these patches do not seem to revert cleanly on cm-11.0
For cm-11.0 (HEAD was 22cbf2cfb211cef2e493c5984d237d0509bf98ce, "otg: when removing ED from readyQ also set flag"), I now do:
Code:
# v--- 2014-11-06 (CM 11.0)
- revert c421809 # update bcmdhd driver from GT-9505 Source
Conflict in drivers/net/wireless/bcmdhd/Makefile, remove -DPASS_IPV4_SUSPEND
and DEBUGFS_CFG80211 (unused), all that remains is:
DHDCFLAGS += -DBLOCK_IPV6_PACKET
Conflict in drivers/net/wireless/bcmdhd/dhd_sec_feature.h, remove:
CONFIG_MACH_KONA
.config:
BCMDHD=M (was =Y, but this allows debugging)
DHD_USE_STATIC_BUF=N
DHD_USE_SCHED_SCAN=N
- revert 4465558 # WIFI: Use kernel version 3.4 ifdef's.
- revert 3cedbff # wireless backport from 3.4
- git checkout 3cedbff -- include/linux/{export,module}.h lib/genalloc.c
git commit -m 'Build fixes from 3cedbff'
Compile fixes, also used by d90b43b "mali: add r3p1 for devices that need it"
This compiles (with CONFIG_MAC80211=M), I have yet to try the newer rt2x00 for my purposes.
Hello, I tried to build ubuntu touch for Galaxy TAB3 10.5 (santos10wifi : gt-p5210)
I need help about an error message because I don't understand where is the error.
Code:
Install: /home/jimy/Desktop/phablet/out/host/linux-x86/lib/libz-host.so
Import includes file: /home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/import_includes
target C++: InputDispatcher_test <= frameworks/base/services/input/tests/InputDispatcher_test.cpp
In file included from /usr/include/bits/posix1_lim.h:160:0,
from /usr/include/../include/limits.h:143,
from external/stlport/stlport/limits.h:30,
from frameworks/base/services/input/tests/../InputDispatcher.h:34,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:17:
/usr/include/bits/local_lim.h:64:0: warning: "PTHREAD_KEYS_MAX" redefined [enabled by default]
In file included from bionic/libc/include/limits.h:86:0,
from /usr/include/../include/limits.h:123,
from external/stlport/stlport/limits.h:30,
from frameworks/base/services/input/tests/../InputDispatcher.h:34,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:17:
bionic/libc/include/sys/limits.h:181:0: note: this is the location of the previous definition
In file included from /usr/include/../include/wchar.h:884:0,
from external/stlport/stlport/stl/_cwchar.h:68,
from external/stlport/stlport/stl/_limits.h:36,
from external/stlport/stlport/limits:29,
from external/gtest/include/gtest/gtest.h:54,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:19:
/usr/include/bits/wchar2.h:448:3: error: #error "Assumed value of MB_LEN_MAX wrong"
In file included from external/stlport/stlport/stl/_cwchar.h:68:0,
from external/stlport/stlport/stl/_limits.h:36,
from external/stlport/stlport/limits:29,
from external/gtest/include/gtest/gtest.h:54,
from frameworks/base/services/input/tests/InputDispatcher_test.cpp:19:
/usr/include/../include/wchar.h: In function 'int wctob(wint_t)':
/usr/include/../include/wchar.h:395:50: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
build/core/binary.mk:432: recipe for target '/home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/InputDispatcher_test.o' failed
make: *** [/home/jimy/Desktop/phablet/out/target/product/p5210/obj/EXECUTABLES/InputDispatcher_test_intermediates/InputDispatcher_test.o] Error 1
Could someone help me ?
Recently, I have been trying to build Lineage OS 16.0 for my smartphone (Nokia 8). I have created a device tree, vendor tree and downloaded the kernel sources. However everytime I try to build, at around 63% it gives weird compilation errors. Here is the error message. I am building with WSL 2 environment;
Code:
[ 5% 2042/39631] //art/dex2oat:libart-dex2oat clang++ art/dex2oat/linker/image_writer.operator_out.cc [arm]
In file included from /mnt/d/dev/android/android/lineage/out/soong/.intermediates/art/dex2oat/art_dex2oat_operator_srcs/gen/art/dex2oat/linker/image_writer.operator_out.cc:3:
In file included from art/dex2oat/linker/image_writer.h:40:
art/compiler/driver/compiler_driver.h:99:18: error: use of undeclared identifier 'Compiler'
Compiler::Kind compiler_kind,
^
art/compiler/driver/compiler_driver.h:145:3: error: unknown type name 'Compiler'
Compiler* GetCompiler() const {
^
art/compiler/driver/compiler_driver.h:348:3: error: use of undeclared identifier 'Compiler'
Compiler::Kind GetCompilerKind() {
^
art/compiler/driver/compiler_driver.h:471:19: error: use of undeclared identifier 'Compiler'
std::unique_ptr<Compiler> compiler_;
^
art/compiler/driver/compiler_driver.h:472:3: error: use of undeclared identifier 'Compiler'
Compiler::Kind compiler_kind_;
^
5 errors generated.
...
ninja: build stopped: subcommand failed.
10:22:23 ninja failed with: exit status 1
#### failed to build some targets (01:49:21 (hh:mm:ss)) ####
Looking at it, the compiler complains that the class 'Compiler' is not defined in the 'compiler_driver.h' file. However looking at this file, it includes the 'compiler.h' which contains the Compiler class. Has anyone ever experienced this error, and is there any way to fix it?