i tired to flash to wm6 rom's never worked every thing go smoth then nothing appears just the rgb screen then i go back again to NVID
so how exactly it goes
i mean how to know wich rom of WM6 would work on my device
i have g4
please help
please read http://forum.xda-developers.com/showthread.php?t=377545
three are explanations for procedure for flashing to wm6. first thing is hardspl then flash to winmo 6.
sory for being stupid but it went smooth and im ofire
thanks hell of a great fourm
now im happy Qtek S200 Owner with WM 6.5 Proooooo
Related
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Ehm.. You do know that there allready IS a sticky on how to do the upgrading ?
only SPL changes you can bring back imate boot screens (splash) by using nvid ruu ,SPL is hard to change but radio and splash could be changed right!! .although first time users go into shock for days ,but don't worry i had the same one too ,it doesn't matter now.
koorosh_bsboys said:
I want that moderators make this thread sticky so that all G4 Imate Jamin Users can read this before doing everything in order to upgrade to WM6.
Dear user!
All the available WM6 ROMs require installing a Qtek WM5 before upgrading to WM6. And if you installed the ROM that they required, your Imate will become a Qtek for ever and there is no turning back!
It means that you cannot install Imate Original ROMs on your device anymore & you cannot even install Qtek original ROMs on your device because there is no method to CID-Unlock a G4 Imate jamin!
My personal advice is if you want to upgrade to WM6, DO NOT install any of those WM5 ROMs on your device and just install the WM6 upgrade.
Click to expand...
Click to collapse
TOO LATE !!!!!
The only thing that gets me is that with the Imate you could paste into the WiFi password box, withe the Qtek you can't and when you have a 63 character password that's a pain in the arse!
Phil
but password is not managed by SPL or radio ,so suggest a different OS for imate instead of nvidQtek or get some cab to remember your password does anyone know such OS or cab
I was looking and couldn't find a clean wm 6.1 rom for wizard g4 . Everyone of the posted ones has some progs in it. Does anyone have one or can post a link?
Thank you
i think there was few older builds of clean WM6.1 roms in the wizard mobile thread. Another thing what you can do is to download the desired rom and kitchen and remove the stuff you dont like in the kitchen
Never tryed that, so better not Will try and search more if i could find maybe with minimum programs.
It's not hard to just turn off Touchflo on the ROM in my SIG. After a fresh install, has over 45MB of free memory, and averages about 20MB of RAM at idle.
wm 6 for my qtek 9100 g4
hello guys im new in this forum and i have my qtek 9100 with wm5 but i want install wm6 my question are how can i do to unlock the cid because its g4 and what happen with the keyboard i want try with some roms in spanish because im from mexico i really apreciate your help
XatanaX said:
hello guys im new in this forum and i have my qtek 9100 with wm5 but i want install wm6 my question are how can i do to unlock the cid because its g4 and what happen with the keyboard i want try with some roms in spanish because im from mexico i really apreciate your help
Click to expand...
Click to collapse
You have two choices:
HardSPL (semipermanent, fools the hardware into believing that it is unlocked)
SoftSPL (temporary, places the phone in a semi-unlocked state long enough to flash it)
For most people, I recommend SoftSPL, simply because it's easy to revert back to your OEM ROM in between updates, if you turn into a flashing junkie.
hi im new
please help me to update my qtek9100 g4
my msn is
[email protected]
first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY
about the RUU always giving me error
program has stoped and i have to close it
is there is anyway to flash from SD card ?
badboyilprimo said:
first of all im new to wm
Qtek S200
running on wm5
i have windows 7 32-bit
i did read many things
please i know there is alot of how to
but i need somone to guide me personaly
like msn or skype chat please
and i dont know wich rom to get or from where
i already downloaded a 6.1 rom and tried so many times
1:had activsync issu (solved)
2:about the spl there is SPL 2.200.001 on my device i read this on the boot screen
wating for a rply
that's my main issu
YYYYYYYYYYY DOWN HERE YYYYYYYYYYY
Click to expand...
Click to collapse
You have a G4 device, so the picture send by you is a tipycal problem when you don't check Vista/W7 option. Read all posts from Prophet_Upgrade tool, your problem was discused some time ago there... Prophet device can't be upgraded from sd card, it need special SPL to support this. Please read until start a new thread!!!!
i used xp and i flashed with 2 kinds of rom's on urs and other one i have g4 device
but now im stuck at rgb screeen what shud i do