Related
If anyone out there has attempted or successfully achieved dual boot with villains dualizer, well I need help.
I've gotten to the point where I have to enter the following into my virtual Linux console on virtual box:
Cd ~/Downloads/dualizer-v.0/
Chmod +x dualizer
./dualizer setup
All goes well until the last command where it says something like: make sure Java is in lineup!
Can anyone help me?
Sent from my aHero using XDA App
I'm just guessing here, but perhaps your box doesn't have Java JRE installation. Or perhaps dualizer needs JDK (development kit)?
Perhaps... how would I get both of those? I've looked at the installed add-ons in virtual Linux and all the Java ones are ticked.... perhaps the file is corrupt? Or Linux isnt installed correctly?
Sent from my [email protected] EzHero using XDA App
Alrighty, I am new to the linux world and I am trying to setup my beloved adb on my Ubuntu. Java is there, SDK in in /opt/androidsdk. Do I need something more? I read that people install Eclipse also but since I am not a developer I don't need it, do I? I only need to execute very simple adb commands like push.
With Windows I needed the HTC Hero drivers and then it worked like a charm. Do I need something similar here?
I tried to run adb devices while my phone was connected and I get a phone with ?????????? as a name.
Is adb going to work or do I miss something?
Thanks in advance!
Adb works fine on x64 Ubuntu. I know there is a guide for it on www.villainrom.co.uk/wiki, but then search "adb" and it should bring up the entry.
I'm installing Ubuntu again today anyway, so I can check it works (which it does btw)
theodore80 said:
Alrighty, I am new to the linux world and I am trying to setup my beloved adb on my Ubuntu. Java is there, SDK in in /opt/androidsdk. Do I need something more? I read that people install Eclipse also but since I am not a developer I don't need it, do I? I only need to execute very simple adb commands like push.
With Windows I needed the HTC Hero drivers and then it worked like a charm. Do I need something similar here?
I tried to run adb devices while my phone was connected and I get a phone with ?????????? as a name.
Is adb going to work or do I miss something?
Thanks in advance!
Click to expand...
Click to collapse
Try doing this.
sudo adb kill-server
sudo adb root
then do w/e you need to do. This worked for me.
Not sure if you need to sudo kill-server, if it doesnt kill it, try without
ante0 said:
Try doing this.
sudo adb kill-server
sudo adb root
then do w/e you need to do. This worked for me.
Not sure if you need to sudo kill-server, if it doesnt kill it, try without
Click to expand...
Click to collapse
I did this followed by adb devices and I now get the correct device name.
I guess that it works though I didn't try to push any app
Another question: how do I add adb to the path? I currently need to type in the full adb path. It is linux related but I am new into this exciting world!!
Thanks for helping me out!
Google "Ubuntu add to path" and it will tell you
Hi all,
I searched quite a lot, but seems to me not nearly enough. I've been using adb on my Windows 7 machine for a while now, but would like to have adb at work on my Ubuntu 11.04 machine where I am going to start some boring development.
I have installed the sdk and eclipse and and and (if it is important WHAT I installed more than this, I will elaborate)
lsusb returns
Code:
Bus 002 Device 009: ID 04e8:689e Samsung Electronics Co., Ltd
so I have set my
/etc/udev/rules.d/51-android.rules
to reflect like this:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="04e8",ATTRS{idProduct}=="689e",SYMLINK+="android_adb",MODE="0666
I'm kinda hoping this is wrong and there is an easy fix that I can laugh about.
When I have the emulator running and my phone plugged in
Code:
$sudo adb devices
returns a blank line and something about an emulator, only emulator running yields no blank line and only phone plugged in yields a nice and quiet blank line.
I had this on Windows as well when I struggled with drivers, but the CD sorted it out. I read that the necessary drivers comes with the SDK, but I might be wrong.
I have tried different tutorials and different values for the idProduct and idVendor as some tutorials claim they should be kept constant and not vary per phone... I restarted adb each time I made a change with
Code:
$sudo adb kill-server; sudo adb start-server; sudo adb devices
I'm currently running FirstUA v1.2 if that changes anything.
If you need more info, don't hesitate to ask, I know it's easier to solve problems with the right info (coming from an IT helpdesk).
Digi.Gram said:
Hi all,
I searched quite a lot, but seems to me not nearly enough. I've been using adb on my Windows 7 machine for a while now, but would like to have adb at work on my Ubuntu 11.04 machine where I am going to start some boring development.
I have installed the sdk and eclipse and and and (if it is important WHAT I installed more than this, I will elaborate)
lsusb returns
Code:
Bus 002 Device 009: ID 04e8:689e Samsung Electronics Co., Ltd
so I have set my
/etc/udev/rules.d/51-android.rules
to reflect like this:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="04e8",ATTRS{idProduct}=="689e",SYMLINK+="android_adb",MODE="0666
I'm kinda hoping this is wrong and there is an easy fix that I can laugh about.
When I have the emulator running and my phone plugged in
Code:
$sudo adb devices
returns a blank line and something about an emulator, only emulator running yields no blank line and only phone plugged in yields a nice and quiet blank line.
I had this on Windows as well when I struggled with drivers, but the CD sorted it out. I read that the necessary drivers comes with the SDK, but I might be wrong.
I have tried different tutorials and different values for the idProduct and idVendor as some tutorials claim they should be kept constant and not vary per phone... I restarted adb each time I made a change with
Code:
$sudo adb kill-server; sudo adb start-server; sudo adb devices
I'm currently running FirstUA v1.2 if that changes anything.
If you need more info, don't hesitate to ask, I know it's easier to solve problems with the right info (coming from an IT helpdesk).
Click to expand...
Click to collapse
The SDK Drivers are not for Galaxy Ace , Google for the drivers , they should be easy to find
Sent from my Ultma Weapon using XDA App
It seems that my problem begins with our Proxy server.... As the SDK manager and I had a quarrel about authentication, I downloaded some of the packages directly and forced the manger to use them instead of those on Google. With this, I accidentally downloaded an outdated adb, which had problems specifically with the Galaxy line of phones.... Downloading the correct package now, will see if it works better
Maybe I must just stop before I think of continuing I installed the newer r06 version, and my device is picked up, but now adb shell gives me this:
Code:
:~$ adb devices
List of devices attached
S58300c017faf device
:~$ adb shell
sh: applet not found
Any ideas where to look for the applet? Maybe I must continue tomorrow, new day new ideas.
Do you have Debugging turned on? And is the device rooted with Busybox? I assume yes since you're running a custom ROM but double checking.
If you're having trouble, I'd either: a) run a VM with XP SP3; b) head to the Android Q&A board here.
mmm, I never though of looking at that, since I figured they do say busybox is installed on this ROM, but thanx for nudging me into that direction, I found this post from ketut.kumajaya so I'm looking into that. Had some issues with not abling to get rw access, but my only problem there was a spelling error in the terminal.
I still get the error with the sh: applet not found, even after I tried the advice on that link. I tried installing all 3 versions shipped with BusyBox Installer on all 3 locations, still nothing. Just had an idea I'll try, if you invoke sh in linux you get a new shell, when I invoke sh I get the applet not found error. Maybe I should upgrade my sh or something. Worth a try
I am running a VM for the VB programming I do at work, but that doesn't have USB support (to much trouble to reinstall Virtual Box now just for USB support). Last night I tested on Windows 7 (first time since I started using this ROM) and it failed with the same error. I'm sure it's the sh that's broken or something. Will test on my wife's phone tonight (running the same ROM).
Thanx for your ideas so far. That's what I love about an online community, even if you don't exactly know what's wrong, people sling ideas around that nudge you in the right direction. One error message at a time
Solved thanx to Ketut
Thanx for all your help guys.
So I downloaded ubuntu 12.10 and am running it in VMWare, only so I could untar a package to get GenTop2 set up... Anyways I tried setting up ADB in VMWare using this tut https://help.ubuntu.com/community/AndroidSDK the command adb shell works but NO commands like devices or anything else work... Any tips? example: [email protected]:~/android-sdk-linux/platform-tools$ adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
~ # adb devices
/sbin/sh: adb: not found
Read up on UNIX command line stuff. The adb binary must be in your $PATH. This...
jeffreygtab said:
~ # adb devices
/sbin/sh: adb: not found
Click to expand...
Click to collapse
...tells me it is not.
On a side note, I recommend using VirtualBox instead of VMware. IMO it has better open-source community support and unlike VMware it is free. Better yet, be a real man and install Linux natively.
Other solution is to cd into the platform-tools dir and do ./adb (note the dot slash at the beginning)
Virtualbox (at least on debian) has some problems with the usb subsystem... is better to use unetbootin and make a live ubuntu on a pendrive, with persistence enabled so what you do on thah session remains across boots
Yeah I figured that running it essentially emulated would give me problem. I only did this because im out of discs and my desktop can't boot from USB drive.
jeffreygtab said:
Yeah I figured that running it essentially emulated would give me problem. I only did this because im out of discs and my desktop can't boot from USB drive.
Click to expand...
Click to collapse
So does anyone have a solution? Beyond installing Ubuntu, because that's not really an option...
jeffreygtab said:
So does anyone have a solution? Beyond installing Ubuntu, because that's not really an option...
Click to expand...
Click to collapse
Huh? I already gave you a solution, as did andresrivas...
Read the posts again.
According to the phantom expert at the bottom of this forum you must have AdActivity declared in AndroidManifest.xml with ConfigChanges. I would go with that.
Sent from my PG86100 using xda app-developers app
planb234 said:
According to the phantom expert at the bottom of this forum you must have AdActivity declared in AndroidManifest.xml with ConfigChanges. I would go with that.
Click to expand...
Click to collapse
...What?
I think you missed your intended thread entirley.
I use virtualbox and it works perfectly, cd into the platform-tools as was said, do the ./adb but make sure you mount your phone to virtualbox (there is an icon at the bottom where you can right click and mount it, see screen)
Hi
First of all, sorry for my bad english.
It has been several hours that i'm trying to find a solution to my problem.
I want to wake my nvidia shield via adb command throught network.
I installed android tools on my raspberry pi, and when i connect to it via command line everything work, i can wake up the Shield.
But when i put my command line in a bash script
Code:
#!/bin/bash
adb kill-server
adb start-server
adb connect 192.168.1.38:5555
adb shell input keyevent KEYCODE_WAKEUP
adb kill-server
i have this error :
Code:
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
I dont know why, when i am execute the command line in a bash script it can't find the rsa key, who is there and should be used.
Any ideas
Thanks in advance.
darkouz said:
Hi
First of all, sorry for my bad english.
It has been several hours that i'm trying to find a solution to my problem.
I want to wake my nvidia shield via adb command throught network.
I installed android tools on my raspberry pi, and when i connect to it via command line everything work, i can wake up the Shield.
But when i put my command line in a bash script
Code:
#!/bin/bash
adb kill-server
adb start-server
adb connect 192.168.1.38:5555
adb shell input keyevent KEYCODE_WAKEUP
adb kill-server
i have this error :
Code:
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
I dont know why, when i am execute the command line in a bash script it can't find the rsa key, who is there and should be used.
Any ideas
Thanks in advance.
Click to expand...
Click to collapse
Normally on Windows the first time you turn on usb debugging it will pop up and ask you to accept the adb key. This is what is preventing you, I haven't had to resolve this in Linux, but essentially you need to go to C:\\Users\You\.android\ (in Windows, path will be different in Linux) and copy the file adbkey. Now you need to move it to data/misc/adb/
This will most likely require root or TWRP. Good luck, my friend.
Sent from my KYOCERA-C6745 using Tapatalk
Hi
Thanks for your quick response.
I couldn't make the connection via USB my adb tells me that there is no emulated device. But it work with network And yeah the first time I made the connection, the authorization pop up appeared on my shield. I checked, always authorized this device.
I have the key in /root/.android on my raspberry pi
I don't think I have the access to the /data/ folder in my shield.
But what I don't understand is why when I execute the command in a terminal like that, it work and when it's from the bash script it won't work anymore
darkouz said:
Hi
Thanks for your quick response.
I couldn't make the connection via USB my adb tells me that there is no emulated device. But it work with network And yeah the first time I made the connection, the authorization pop up appeared on my shield. I checked, always authorized this device.
I have the key in /root/.android on my raspberry pi
I don't think I have the access to the /data/ folder in my shield.
But what I don't understand is why when I execute the command in a terminal like that, it work and when it's from the bash script it won't work anymore
Click to expand...
Click to collapse
Option B would be to dump your boot.img and use Assayed's kitchen to add insecure kernel and adb direct root, then the adbkey doesn't need to be on the device.
Sent from my KYOCERA-C6745 using Tapatalk
RealWelder said:
Option B would be to dump your boot.img and use Assayed's kitchen to add insecure kernel and adb direct root, then the adbkey doesn't need to be on the device.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
Yeah as you said in your previous post, i think the solution is to root the nvidia shield cause the rsa key doesny copy itself on the device.
But would you able to explain to me why if i execute those command individually in the terminal it works.
But if i put them all in a bash script that i execute it doesnt work anymore, what's the difference between those two procedure ?
darkouz said:
Yeah as you said in your previous post, i think the solution is to root the nvidia shield cause the rsa key doesny copy itself on the device.
But would you able to explain to me why if i execute those command individually in the terminal it works.
But if i put them all in a bash script that i execute it doesnt work anymore, what's the difference between those two procedure ?
Click to expand...
Click to collapse
How are you executing the script? There's some (hopefully) helpful info here.
https://community.spiceworks.com/topic/433656-command-not-running-in-batch-but-will-run-in-cmd
Sent from my KYOCERA-C6745 using Tapatalk
RealWelder said:
How are you executing the script? There's some (hopefully) helpful info here.
https://community.spiceworks.com/topic/433656-command-not-running-in-batch-but-will-run-in-cmd
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
i m doing : sh script.sh
i m gonna read that, thanks
I found the solution.
I don't really understand why, but adding
Code:
sleep 1
before
Code:
adb shell input keyevent KEYCODE_BACK
resolved the problem, maybe the script execution was to fast for adb to adjust, dont know.
All i know is, that works
darkouz said:
I found the solution.
I don't really understand why, but adding
Code:
sleep 1
before
Code:
adb shell input keyevent KEYCODE_BACK
resolved the problem, maybe the script execution was to fast for adb to adjust, dont know.
All i know is, that works
Click to expand...
Click to collapse
Glad you got it.
Sent from my KYOCERA-C6745 using Tapatalk
sudo rm -rf /home/(username)/.android
that worked with my kde neon machine