I am having trouble with my Pc not reading my HTC HD2,when i plug the USB cable in the PC it say's device not supported.
For the last six months i have had no problem i just plug it in and i could read the storsge card in my computer with the rest of the drives ie C: D: E: ect, now it wont read at all i have windows media device centre installed and it wont pick it up either,any ideas. I can bluetooth and charge the phone no problems ,Maybe the usb cable
Thanks
with teh phone connecvted, (after it has said not supported) open up device manager on the pc, find teh entry which will have an exclamation mark, right click it and choose4 uninstal. then try it again.
also worth reinstalling windows mobile device center
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
harv123456 said:
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
Click to expand...
Click to collapse
He did not say open device center , he said open "Device Manager", you can open it from computer management in the control panel ...
You did say it said "device unrecognized" that means the pc is "seeing" it , just not seeing it right ...
When in device manager find ,the item that is this "unknown device" if you are not sure which it is, unplug it see what dissapears, and what reappears when you plug it back in, it may just be under usb devices or the similar ..
Then Uninstall that device, then unplug the phone, wait a few seconds and plug it back in ... also plug it right into the computer do not use a usb hub ...
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
harv123456 said:
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
Click to expand...
Click to collapse
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
i have had several experiences with usb devices malfunctioning and causing that kind of error. and a few of those times i was able to isolate the problem to a faulty cable. but those were generic usb/miniusb cables (ie not supplied with the device... just available loose in the market). if its a cable supplied by the OEM, i doubt it would fail all of a sudden. but try swapping cables and see... good thing hd2 has a standard mini usb interface...
Thanks silenced i will try a different cable tomorrow thanks for your help
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
Did you right click and Uninstall the "Unknown Device" then unplug and re-plug?? ...
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
harv123456 said:
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
Click to expand...
Click to collapse
Did you solve this problem because I m getting same problem with my cable. Charging but no connection with PC or Notebook. No Memory card reading or syncronize
Related
Straight to the point as I need this fixed ASAP.
My phone can charge via mains and USB port on my laptop.
I cannot however mount SD Card or go into USB Debugging mode. The menu on the phone does not show up at all. Only charges.
I have tried different cables including official sony ones and a few third party ones to no avail.
I tried different PC's still nothing.
On the occasion I get "USB device not recognised" but it isn't a driver fault at windows end.
Done a factory reset of the phone... still nothing.
Please help
Regards
Z3X
Z3X said:
Straight to the point as I need this fixed ASAP.
My phone can charge via mains and USB port on my laptop.
I cannot however mount SD Card or go into USB Debugging mode. The menu on the phone does not show up at all. Only charges.
I have tried different cables including official sony ones and a few third party ones to no avail.
I tried different PC's still nothing.
On the occasion I get "USB device not recognised" but it isn't a driver fault at windows end.
Done a factory reset of the phone... still nothing.
Please help
Regards
Z3X
Click to expand...
Click to collapse
I'm having the same crap.
Win7 32bit
OmegaRED^ said:
I'm having the same crap.
Win7 32bit
Click to expand...
Click to collapse
I discovered its a loose connection within the phone. try every position at the phone usb end i have to hold the USB a certain way to connect
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
chris_knows said:
Anyone know what the problem is?
Click to expand...
Click to collapse
Your computer or SD. Uninstall any SE drivers with USBDeview and reconnect which should install new drivers and hopefully sort it out.
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Hi, I am experiencing the same thing and this happened after that I first rooted my phone using superoneclick and then replaced my fonts with arabic fonts.
I hope someone can find the root cause for this error.
chris_knows said:
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
Click to expand...
Click to collapse
I've had off and on problems in this area. Searched around and found this thread.
[GUIDE] ADB, Fastboot, and Nandroid for Noobs
This is what he suggests to solve problems with ADB and USB, (below is ALL the work of the Guide author):
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
chris_knows said:
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Click to expand...
Click to collapse
Had the same issue my friend. it's the USB socket within the phone that is gubbed. I spent days searching for a solution to no avail.
Why don't you install PC Companion? You can download it from SE. Once you've finished installation, connect your phone and let it detect your phone.
After that, you can uninstall PC Companion. The purpose is to let PC Companion installs all X10 drivers.
Hi guys,
Well it's not the socket because I can charge it normally with wall charger. Regarding the drivers, of course I have tried with PCcompanion and it didn't work.
Thanks...
well i think it can be the socket, becouse, wall charger only uses two wires of the five the socket has, so may be data+ or data- wire is broken. Have you tried with different usb cable?
As the mobile usb socket only has TWO solder points and it is very small socket and the position is not the best, may be some of the five lanes of the socket have unsoldered...and this is why it charges but it cant connect to computer.
It is only an idea..i hope the cause is some driver, mobile configuration (have you tried to reset your phone? ) or the USB cable.
after changing 3 cables I got it to work...
Thank you for your support.
USBDeview is giving me a virus, the .exe is the problem
x10user2011 said:
USBDeview is giving me a virus, the .exe is the problem
Click to expand...
Click to collapse
nvm i downloaded the file from nirosoft.com instead and it works fine.
USB Controllers
Usually if it works on another computer, but not your own, it is because your USB Controllers are messed up. In Device Manager go to Universal Serial Bus Controllers -> right click each one and say Uninstall(your USB mouse/other peripherals will stop working so be warned) -> restart your computer and let it install all the drivers again. Should be working now.
I'm on v2.3 and taking out the battery and SD card and re-inserting it solved the problem for me.
Saz
***
I'm still having this issue. 3 cables 3 computers I think its my port. Charges fine when I plug it into wall or computer.
Just nothing for data its like nothing is happening.
Sent from my X10i using XDA App
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
Yeah, so i've read plenty of topics about USB problems, but none gave me the
anserw.
I'm running Villain ROM 3.0. I just cant connect my phone to the computer (Mac).
It work well before also after flashing Villain.
What i tried:
1. connecting my phone without usb debuging ->phone gives the sound and report in the notification bar : "MTP - initializing" then "USB Connected, MTP-connected" But it does not gives a connection with my mac.
2. Connecting my phone with usb debuging ->phone gives the sound, but nothing happens. nothing in the notification bar neither on the computer. It's strange becouse before it was making the same sound and giving me the info in the notification to connect.
3. I've also tried KIES air it works fine. i can see my phone content, but when im trying to send one file (130mb) there is no reaction to this.
Also some time ago i was able to get usb working by simply choosing usb debuging and restarting phone.
But now i have no acces to my storage
Please help
I have a similar problem.
When I connect my SGSII to my PC (with USB Debugging On) I see 2 Removable Drives in Windows' Explorer. If I click on either one I get the "Please Insert Disk". If I connect to the same USB with USB Debugging off, then Kies Starts but does not connect.
Now the weird bit, if I do the same thing in the next USB port, then everything works fine.
Going back to the first USB slot then the problem reappears.
The 2 USB slots are next to each other and go back to the same controller on the motherboard. I have removed Kies and reinstalled Kies. I have uninstalled all the drivers. I have even changed the USB cable. When I plug a USB External Hard Drive into either USB, it works fine.
Maybe the phone just likes the one connection per computer. I'll have to test that out in my work's PC.
Update:
managed to get a microUSB cable and tested it on my work's PC. Exact same situation. Both PCs run Windows XPpro.
Has anyone else noticed this?
Now, when you said that, i checked with my second usb por, and everything works fine .
So thanks for your help. One working with sgs2 usb port is enought for me
my problem is that when i coonect my phone to pc via datacable its only charging its not showing usb mass storage and debugging option and what ive tried
1)i correctly installed all the drivers from lg v3.7.2
2)i replaced my phone coonector
3)i replaced my usb cable
4)i freshly installed some cm7 rom and even tried cm9 roms
after this also the problem is not solving so please please help.....
any suggestions welcome...and thanks in advance...
Phone not recognized by pc
I am running Cm7.2.0 RC3
menu>Settings>Applications>Development>android debugging (checked on)
I use this driver on my windows 7 pc (LGAndroidDriver_Ver_1.0_All) downloaded from Microsoft
I can,t remember exactly why but the I had to uninstall the driver supplied with the LG mobile update tool as it interfered what i was doing at the time.
I have to have debugging on and connect the cable to the PC first then the phone
the PC will recognize and the driver will display in device manager. The phone will display USB Connected and USB debuging connected.
I Hope this Helps! I have attached the driver press thanks if It helps and post the outcome, I will try to help as much as possible.
fdaconta said:
I am running Cm7.2.0 RC3
menu>Settings>Applications>Development>android debugging (checked on)
I use this driver on my windows 7 pc (LGAndroidDriver_Ver_1.0_All) downloaded from Microsoft
I can,t remember exactly why but the I had to uninstall the driver supplied with the LG mobile update tool as it interfered what i was doing at the time.
I have to have debugging on and connect the cable to the PC first then the phone
the PC will recognize and the driver will display in device manager. The phone will display USB Connected and USB debuging connected.
I Hope this Helps! I have attached the driver press thanks if It helps and post the outcome, I will try to help as much as possible.
Click to expand...
Click to collapse
Thanks a lot dude I got little hope now ill surely try this
Sent from my LG-P500 using xda premium
check this......
[GUIDE][CM9][HOW TO ESTABLISH - USB Mass Storage]
Since you've stated that the problem exists irrespective of the ROM you use, there is a possibility that your microUSB port of your phone might be damaged.
Also try and install the drivers on a different computer and see whether it's working or not. Also, if you can, borrow another LG P500, connect it to your system, and see whether it is working as it should. This will help in identifying where the problem actually is.
Hope this helps.
If their aint earthing in the socket u plug ur pc then congrats ur pcb of the phone has been damaged
get it replaced via lg service center
+1
happened wid me too once