Related
I know it sounds noob´ish and it surely is, but I just cannot flash anything onto my Hermes right now. I´ve already WM6 and SPL1.13 on it. I also tried SPL1.09ds but all I get from the RUU updater is an Error260 when I try to flash a new WM6 version onto it. I also tried unticking USB connections in ActiveSync and manually starting the bootloader on my Hermes100. Can anybody give me a tip how it can be done?
PS.: Just tried the micro SD card flashing method which used to work here but doesn´t anymore! I´m really stuck now
what is your current SPL/IPL version??
to check press and hold the side ok button and the power button, then insert the stylus into the hole in the bottom of the device.
Hamudi2000 said:
I know it sounds noob´ish and it surely is, but I just cannot flash anything onto my Hermes right now. I´ve already WM6 and SPL1.13 on it. I also tried SPL1.09ds but all I get from the RUU updater is an Error260 when I try to flash a new WM6 version onto it. I also tried unticking USB connections in ActiveSync and manually starting the bootloader on my Hermes100. Can anybody give me a tip how it can be done?
PS.: Just tried the micro SD card flashing method which used to work here but doesn´t anymore! I´m really stuck now
Click to expand...
Click to collapse
For me, I have same experience. I have tried 1.09ds and 2.10 (Hard-SLP), it alos not work for flash rom, display error[260] at final.
Do you have admin rights onyour machine? Also if you dont try with Force SSPL option. I get that error form work when I am not logged in as admin.
were are you stuck? if your stuck in bootloader or splash, look here
If you can still boot to OS, try to flash HardSplv7. if this is successfull, try to flash the new wm6, instead of using autodetect, click spl2.10, and check "is it hard spl?".
good luck!
sorry, I am not stuck on my Hermes, it´s all good, but it won´t flash anything and yes, I have admin rights on XP. I´ve got IPL 1.00, SPL 1.13.Oli. I´d really like to update to a newer version of WM6 but I can´t. I even tried with force SSPL and even the HERMimg.nbh flashing method from card didn´t work.
What I can do off course is booting into WM6, but my WM6 version is a quite old one
PS: Troubleshooting info: When I try to flash HardSPLv7, my device is going into Tricolor mode (like it should) showing IPL-SSPL by Des and SPL-1.09.ds and XP hardware assistant is searching for drivers for an unknown USB device and after a while I´ll get the error260 :/
are you up to date on your .net framework? 3.0?
framework 3.0? no, I think I have 2.0, but thanks for the tip. But my problem is now solved I formatted my micro SD to FAT32 and that helped flashing directly from card. After that I tried flashing via USB and now that also works!
Hi all
Rather than hijacking other threads I thought it might be of help to others if I start a new one.
Having spent hours trawling thru the other threads I have now concluded that I need the help of one of the wise sages such as Cmonex or Olipro.
I decided that a thread might benefit others rather than just pm'ing them.
Ages ago i bricked my ameo.
I had upgraded to spl 3.5 and had been playing with one of michy's roms. Whilst the rom worked fine the boot-up splash screen had become corrupted, I also noticed that the camera had stopped working/initialising.
In an attempt to get the camera back I tried various other roms and decided to downgrade to spl1.2 so that I could go back to a stock rom. In a moment of stupidity I accidentally tried to reflash using a spl3.5 rom.
This resulted in a invalid model id message.
In desperation I did the old vol key down and reset pin. Told the ameo to restore.
From that point onwards the unit is no longer recognised by my pc, in the tricolour boot screen it initialises and says loading 0058002 and then displays
IPL-v1.00
SPL-v1.20 Olipro
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Pdajoy kindly suggested using a mini sd card to flash the unit. I purchased a micro sd with a mini adapter. Formatted the card to fat32, renamed the ndc file booted to the tri colour boot screen and hit reset. All that happens is that is tries to boot the old fecked o/s and gets as far as a blank grey screen and no further.
I really do miss my ameo- the screen on my touch pro is just too small!!!
Any help will be greatly appreciated.
Thanks
Hope is a typo error here, should be
"rename the RUU_signed.nbh to ATHEIMG.nbh"
Did you removed your SIM card before applying?
Sorry my bad for not warning you in advance.
Grey screen, you mean no text at all. Total blank grey?
Am just curious.
hi Pdajoy
I had renamed the files ATHEIMG.nbh, the reference in my post above is a typo. There was no sim in the phone either.
The screen after it tries to load the old corrupt rom is just a grey mass- nothing else, no text or images.
The two pics listed show the ameo booting and then the grey screen.
http://imaginarynumber.co.uk/ameo/IMAG0033.jpg
http://imaginarynumber.co.uk/ameo/IMAG0034.jpg
hi imaginarynumber,
Thanks for the photo.
hey 4.00 on screen, I believe your set is still spl 3.5
If it is my set, I will definitely flash AP4 again.
Best wait a little while for kind sage to drop by with to assist you.
Don't wish to see you bricks yours.
I have the same problem what can we do ?
I found a way to bring back the normal bootloader you just have tu press the reset button then you press the camera button and you will have your bootloader again
IT IS NOT WORKING you get back to the original bootloader but when you want to put back a rom even the official one after 1 percent it gets back to the grey screen PLEASE HELP
Srry athena works again place the mmty tool with mac bin file in the root of c and try again dont forget the task 32 command before the bin command that worked for me
I had the same exact problem (even the screen was the same) and didn't realize that the initial screen that shows up isn't the bootloader. fixed it by waiting for the grey/white screen, holding the volume button down then reset button and camera button + reset which brought me to the actual bootloader. From there I installed the latest AP rom, updated my radio and installed mitchy's 6.1
Big problem: Mac Address? Still getting dark screen and blue stripes!
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
You need to flash a rom
puffo said:
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
Click to expand...
Click to collapse
It looks like you did the wifi fixx correctly but the rom is still corrupted
Go into bootloader to confirm your SPL and then flash an spl appropriate rom
cheers
So, how to proceed now?
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
puffo said:
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
Click to expand...
Click to collapse
You have confirmed that you have spl1.2 by quoting what you have seen in the tricolor screen.
Get back into that screen , making sure you have removed the sim and sd card and then conect to your computer via the usb cable.
You would have downloaded an spl1.2 rom ( you previously stuffed the radio by trying to flash an spl3.5 rom) and then run the romupdateutility .exe .
then you should be sweet!
having read a reply of cmonex to another post I am starting to think that all hope is lost.
It seems that if windows is unable to recognise the phone it is possibly the case that it is completely f*cked!!!
It would be nice if someone could clarify this...
Which WM to ul now?
Dear Iakeman,
thank you so much for your kind reply. So at this stage I can try to upload to my Athena device, basically, any spl 1.2 rom of WM 6.0, or 6.1 or even the 6.5 beta?). Or I must start with spl1.2 rom WM 6.0 ?
Yes! It works!
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
imaginarynumber said:
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Thanks
Click to expand...
Click to collapse
just a thought.
Once you finished doing mtty, did you reenable usb in activesync as per this post
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=2
the other thought was is the usb cable and the usb port able to sync with other wm devices? maybe the slot on your athena is faulty?
Hi Lakeman
Thanks for the reply.
It is possible that the usb port is faulty but it seems improbable that this should have failed at exactly the same time as me stuffing up the O/S.
I will try to find the cmonex post to which I am refering later today (the one that suggests that the phone is stuffed).
Tnx
when i type task 32 show this plz help
Cmd>task 32
Level = FF
puffo said:
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
Click to expand...
Click to collapse
HI PUFFO,
WHICH Cmonex POST 33 R U REFERRING TO?
I M FACING EXACTLY THE SAME PROBLEM THAT U FACED AND AM WAITING FOR THE NEXT STEP.
KINDLY REFER ME TO THE POST SO THAT I CAN START USING MY ATHENA.
THANX
I have a problem:
I flashed my hd2 from a stocked rom 1.42 dutch version, with hspl 1.42. I installed a custom rom from: HTC HD2 Laurentius WWE 21891UltimatePOWER.
it worked fine for 2 or 3 days and then it stocked, i reseted the phone and
When i turn on my HD2, i get a white screen. and it doest go away. Even after softreset (volume button down in bootloader)
When i go in to bootloader i see this screen:
Pb81100 hx-bc
Spl-1.42.hspl xe
0x05
Cotullahspl 0x30
Click to expand...
Click to collapse
When i try to instal a rom by going in to bootloader en then start in win xp the update wont start, it stocked at 0 %
Then i tried to flash a orginal romt by sd:
it stocked at 7 % and i get this screen:
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
- Then i tried to flash a radio rom by activesync, in xp it wont start,
- i tried flashing by sd and it stocked on 98%
- I tried different to install a rom and radio rom by vista, but also no succes
- I tried task 29 (by the Attached Task29 into a single exe.) to erease all data from the phone, but in windows by activesync it wont start
i tried al the above from windows 7.
Is there anyone that can help me, please i getting very desperate.
VERY VERY IMPORTANT! Try and read 2-3 times what is written here http://forum.xda-developers.com/showthread.php?t=609477
Only afterwards proceed to the following :
First of all....try and use Windows Vista or Windows 7.
Second of all....do not try to use task 29 because its a bit more complicated and it involves some drivers and so on!
Use this little thing here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 and after its completed....flash a proper radio something like 2.08.50.xx which you can find on Radio dedicated section here http://forum.xda-developers.com/showthread.php?t=611787
After all these....flash a custom ROM but be careful to be one suited with your radio! Which is a radio appliable for most of custom ROMS BUT be VERY careful!
Another thing.....do not flash from SD Card....Use the CustomRUU tool and flash it via ActiveSync!
Do you get any particular error message? When in bootloader mode, does "usb" show at the bttom of the screen? If so, try moving to a different usb port, preferably at the rear of the pc, or try different cable or even different pc. If still no luck, try uninstalling and then re-installing the latest version of Activesync.
The White Screen issue sounds like the incorrect radio version for the rom. I'm not familar with the details of the particular rom, but there are certain rom/radio combinations that will do that if they do not match eg running a 2.10 based rom with a x.xx.51.xx radio. The phone works intially until a reset and then hangs.
viperd said:
VERY VERY IMPORTANT! Try and read 2-3 times what is written here ......
Click to expand...
Click to collapse
Thanks for the replay
I tried, flashing by activesync. i flashed it the first time by hspl (the tread you link to) and then by activesync. But like i said, the hd2 stops at a white screen, so i tried by every possible way i could think of. Also i tried task 39 by the tool you mention, but it still does not work.
But i will correct my ts.
@clydeb1
I tryd to flash different radioroms, but if it try by activesync it wont start and by sd-flash it stocks at 98%, but i will try a different active sync
Okay,
I tried the following options:
- I installed a newest activesync and tried to instal an new rom under windows xp. The update stocked at 0% and i tried to install radio rom, with the same results
- I installed the windows mobile on windows 7, and tried the same as in windows xp, and still the same results.
Then i tried flashing every rom from the site by the sd-method (after every bad flash i formatted the sd-card with fat32)
With the sd method the phone stocked at 99% and then gives the next images:
00018003
LEOIMG.nbh - Fail
Radio_V2Fail
Update terminate
update fail
Click to expand...
Click to collapse
IS there any one how has a solution for this problem
Ok....try from the beginning!
1.Get from here http://forum.xda-developers.com/showthread.php?t=611433 HSPL2_RUN.zip (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....http://forum.xda-developers.com/show...3&postcount=19
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
viperd said:
Ok....try from the beginning!
1.Get from here (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
Click to expand...
Click to collapse
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Give the phone to someone who can get it to work??
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
korenbloem said:
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Click to expand...
Click to collapse
Thanks mate, if my suggestion doesn't work hopefully you can help him.
xmoo said:
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Click to expand...
Click to collapse
@Korenbloem,
A simple hardreset would have fixed your issue as well.
Instead of all kind of panic experiments like mtty/ flashing radios/roms from sd you could have come to me and I would have helped you.
You flashed a very old rom from the rom archive but never the less that rom is intensivily tested by me and the beta team.
I have no idea what kind of software you installed/tweaks you did or anything else but also with installing the wrong software it could cause the rom not to boot anymore.
Sorry to tell you but these 'bricking' stories are mostly caused by unexperiened users and it
making me sad to see more people are opening threads like this blaming a rom and causing a panic reaction in public destroying our work.
I realy hope you fix your device and I will try to help you but this isn't a rom issue.
Leo
Laurentius26 said:
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
Click to expand...
Click to collapse
Thanks for the adivse, but i already tried that with an orginal rom, but i will try it again, mabey there is a difference with a shipped rom.
The first thing i did was a hard reset, but that did't worked. (the phone is in this shape for 1 month now).
Second. I am not blaming you or anyone. I flashed the wrong radio rom i think (cant remember witch one) And that is my own fault. I never wanna make the suggestion that it is because of youre rom.
I took a risk by flashing my phone. and i is my responsibility.
Edit: I tried a shipping rom nld. But it gives the same error as always, only after 7%. But thanks for the advise
@ Xmoo, First of al thank you that you want to help with a sollution. But what does that mean a goldcard and what are the consequences of using it.
Laurentius26 helped me with fixing my device.
The problem was the radio. and by flashing a factory rom from t-mobile, the hspl was reset to spl 2.00. After that he flashed a orginal shipped rom (the orignal one from my device). And the rom is fixed again SPL 1.66 is now on the device.
Laurentius thanks for al the help!!!!!
HD2 bricked?
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
vanbasten88 said:
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
Click to expand...
Click to collapse
Do you have a branded Leo? If so, enter bootloader (remove battery, press volume down, insert battery), connect via usb (maybe you have to wait for driver installation), start the latest *.exe from your operator/carrier...
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
andreftx said:
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
Click to expand...
Click to collapse
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
silverwind said:
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
Click to expand...
Click to collapse
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
andreftx said:
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
Click to expand...
Click to collapse
The 1.66 ROM you posted above has radio version 2.06.51.07 with it. So have you considered trying to flash that radio version and then flash the ROM. I know if you get the ROM to flash it will flash that radio anyway. But you seem to think you flashed a wrong radio so just thinking out loud here.
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Marshalll said:
Hi, sorry for capitalized title...
I searched and tested for weeks for a solution in this helpful and very professional forum... but I still haven't found a trick for my problem:
I have a NIKI100 - 20key that ActiveSync doesn't recognize (usb port still charge in Windows environment but no data transmission seems to work).
I tried many PCs with many OS, and now I can say that THIS IS NOT A SOFTWARE PROBLEM (or not?).
So i tried SD flashing, and it works only with signed ROM, so I can't flash WM 6.5
Because of USB issue, I can't flash HardSPL.
MTTY doesn't find the NIKI on COM or USB port.
The question is:
Is there a way to flash HardSPL via SD or is there a signed ROM with WM 6.5??
THANKS A LOT IN ADVANCE!!!
ROM: 2.16.831.3
Radio: 1.65.29.22
NIKI100
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
Can you tell me what happens when you connect your device with your computer, when it is already in bootloadermode.
You can turn the phone in bootloadermode to turn your device off and press then on/off button and camera button on the same time, and keep them pressed until bootloader appears.
If I'm correct you will see Serial in the white block, just let me know what you see in the white block when you connect the phone with the computer, if I'm correct Serial will change in Usb, if not just let me know.
Greetz,
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Marshalll said:
Tnx for reply...
I see USB when I connect the cable, Serial when I disconnect the cable.
I'm searching for a SD-card-method for flashing HardSPL: is this a good idea or I'm just wondering ?
Click to expand...
Click to collapse
Ok, can you tell me if you're device has a simlock ?
Greetz,
Hi.
No simlock.
Tnx.
Marshalll said:
Hi.
No simlock.
Tnx.
Click to expand...
Click to collapse
Ok thanks, I'll do some searching and see if we can fix it.
Regards,
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Rataplan said:
Ok, if I where in your situation I should try it this way, just be aware that I can not test it because I don't have such a problem, and you can brick your device if it went wrong.
1. Copy sspl-1.16-nike.exe to your sd-card
2. Copy sspl-1.16-nike.exe from your sd-card to your device
3. Turn phone off and remove sim and sd-card
4. Turn phone on and connect device to your computer
5. Run sspl-1.16-nike.exe on your phone
6. Wait until usb appears in your device
7. Unplug and replug the usb cable
8. Now flash the HardSPL 1.22
If you can run the HardSPL you should be able to flash a wm 6.5 rom.
Click to expand...
Click to collapse
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Rataplan is the expert one on this area,
but wath is your operating system? Seven or XP?
Because i just was able to hardspl on XP, all other things I was able to do on Seven.
Marshalll said:
All right from 1. to 7. but when I run flashin it shows error code 260 (unable to connect).
Is there a way to run SPL "JUMP" and then flash HardSPL via SD card? I think it's the only way to flash HardSPL
Click to expand...
Click to collapse
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Rataplan said:
Did you try to run the HardSPL 1.22 from the bootloader ?
Let me explain a little bit better, did you connect your device with your computer when your device is in bootloadermode and then run the HardSPL 1.22
If this fails, you can rename your nbh-file, hardspl-1.22-nike-shipped.nbh into nikeimg.nbh, copy nikeimg.nbh into the root of your sd-card and turn your device on while pressing the on/off button and the camerabutton on the same time and follow the instructions on the screen.
Succes,
Click to expand...
Click to collapse
Yes, I tried all of this method...The PC can't recognize the niki in bootloader mode.
When I put HardSPL on a tested sd-card (renamed NIKEIMG.nbh), I'm stuck in white screen with "Loading...".
I found some method for flashing HardSPL via sd-card (for Kaiser: http://forum.xda-developers.com/showthread.php?t=433835):
is there a SSPL Jump for Niki that run from sd (as with Kaiser sd-method)?
BTW, I think this is the right way... I'm trying and searching!
For Openview:
I tried with many PCs with XP Pro and 7. The niki usb port seems to be broken (only charges, but no data connection).
Nothing seems to work. If anyone has somethig for flash SSPL and HardSPL from SD, please post!!!
Any other ideas???
I think we tried everything but unfortunally the answer is that it isn't possible to flash the hardspl via sd, the only person you can ask is cmonex, she is the only one who can set this straight.
Here is her User cp but she is a very busy lady.
If you fix it, plse post it in this thread it can help others.
Goodluck buddy
Ok I'll try to contact mrs. cmonex. Of course, I'll post any solution (hope to find one... ).
Tnx for all!
SOLVED!
I solved the issue!! It was only a hardware problem with HTC ExtUSB port!!!
I cleared the pin and resoldered the port on motherboard. Then I flashed HardSPL via standard method and now I can flash anything form sd-card!!
Thanks to all.
Mr. Rataplan, now we can close this post!
Thanks!!
Great Marshalll, I'll ask Electroz to close this thread.
I have flashed my x7500 before using the Athena_WM6_TMUK_2.35.110.4 rom and that worked. Bootloader said spl v1.0 so I tried the authenaunlocker which said it worked and from then the bootloader said spl 1.2 olipro
I then thought I could update to AGB v3.0 , it seemed like it worked but when it rebooted, it shows some mad pixels like a corrupt image and then seems to boot but with a black screen. I can hear it do the ping it does when it asks to calibrate the screen but it is entirely black :-(
I have tried an sd card method of loading a new rom but it always fails after a few seconds with red numbers 68002 and then goes back to the tri color boot loader.
I tried ultravanilla rom renamed to ATHEIMG.nbh in the sd card (formatted to fat32) and that does the same thing with the red numbers.
have I completely bricked it?
I should say that I'm on Windows 7 and I've tried the MAC change fix but the mtty app doesn't give me a usb port to select, just com1 and com2
I tried the windows exectuable for updating the rom but it always fails with error 244 invalid model id.
here's the images I see
[edit] hurray! the mtty thing worked after I found an old laptop that had xp on it to use, as soon as I had that I downloaded activesync , unchecked allow usb connections and fired up mtty, that had an entry for usb and then I just followed the instructions and was able to change the id, after that, I was able to use the windows exe rom update. I'm now back to where I'm started and have donated to cmonex!
hi i have the same problem with my t-mobile ameo.
the tri-screen even shows the same digits as yours.
did you manage to get a fix for it. or is it totally bricked
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Purzelkater said:
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Click to expand...
Click to collapse
hi I have the same problem this guy had, I have one question what rom should I use ? can you give me a link please
Purzelkater said:
If you can enter the bootloader (tricolor screen) it should be possible to reactivate your Ameo. I have flashed my Ameo with wrong SPL ROM too (because it was labled as SPL 1.2 but is SPL 3.5).
If you don't have a WinXP system on your hand, try to flash with SD-card. You need a FAT32 MiniSD card (not SDHC!) or FAT32 MicroSD with MiniSD adaptor.
Format the card and copy the ROM file (for the right SPL!) to it, rename the file from RUU_Signed.nbh to ATHEIMG.nbh. Then go to the bootloader and the Ameo should be ready to flash the new ROM.
If you have a WinXP system you can try to enter the bootloader (remove the MiniSD card before) and then connect your USB cable. The bootloader should change from "Serial" to "USB" and should be ready to flash a new rom.
If your Ameo is fractious you can find some good tutorials here.
Click to expand...
Click to collapse
it is not working...
keep your cool
the most important thing is to keep your cool, I've been in trouble before and managed to sucsses, first of all if you are able to go into bootloader you're fine, it seems to mi you flashed wrong spl, the AGB v3.00 is for spl 3.5 only and for what I understand you have spl 1.2, also i my experience you should work with win xp, i have my laptop with 2 os xp and 7, just to do rom loading on my 3 advantages, so if you are able to put your athena in bootloader plug it to your pc your athena sould change from serial to usb, if you can manage that you are almost done, now all you have to do is flash a compatible rom spl 1.2, if you still want agb v.3 you need spl 3.5 and the only way to achive that is to flash athena projet 4 rom, only when that is acomplished you would be able to load an spl 3.5 rom. I hope this help, keep us posted.
hi i have a pc on windows xp sp3 with htc 4.5 it does not pick up my phone bit it will try to load the windows 6 advantage rom,but after it reaches 2 percent ,the phone resets.i have done the same thing as above,i tried to flach a michy 3.5 rom over windows 6 on 1.25,i can get into bootloader but everytime i flash my phone resets.my mini drive is formatted,so could the problem be with the onboard sd card? if so in plain english could someone take me thru it step by step on hpw to access and format that,to see if it makes a difference,many thanks,and a nice contribution to anyone who can help me,and please if you start talking about hot keys,please state which ones,as every key is a hotkey many thanks curzie,if anyone ever needs pc or laptop advice pm me thanks
Who reflash device with this trouble ???
Working - or not ???
flash rom problem
hi, I'm in the same situation and sorry for my English, I have a X7500 I unlocked the radio, and then I installed the 3.0 rom agb all went well, but on the first reboot the system does not start, black screen, if I press the volume button turns on but displays the volume and the touch does not work, I can not make it go into bootloader because it turns on and remains on the flag!
Can you help me?
thanks
Solved
Check out my post http://forum.xda-developers.com/showthread.php?t=2172291