Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.
Related
Been trying everything on the Internet and managed to make some headway with Monet (Virgin Lobster 700tv) unlock (this might work for Meteor/C700 as well).
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
[see attachment]
a. copy "SP_AllowCertificateInstall.cab" to the root of Monet memory or card
b. Use file explorer on monet to navigate to file. Click to run. Should run ok.
c. Unzip "SDA_ApplicationUnlock.zip" on PC and run "SDA_ApplicationUnlock.exe" whilst Monet is connected via activesync
2. Copy registry editor onto Monet. I used PHM, but others should work. Note install PHM loader on PC whilst monet is connected via activesync. It might install correctly on Monet, it might not. This does not matter. Just navigate on your PC to Program Files\phm and find the .exe file and copy to root of Monet memory or card.
Also nice free remote registry editor here (works from PC whilst phone is connected via activesync):
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Excellent 'free' combined file explorer and registry editor (perhaps for later - after app. unlock) SGS:
http://www.handango.com/PlatformPro...925777&Ntt=registry&productId=195244&R=195244
3. Using phm (or the registry app you like) change the four keys specified in this guide (you might find the above process has already reset 1001 and 101b:
http://wiki.spv-developers.com/HTC_Application_Unlock_Guide
They are:
Under HKEY_LOCAL_MACHINE\Security\Policies\Policies:
a. Change the DWORD named "1001" to 1 (could originally be 2)
b. Change the DWORD named "1005" to 40 (could originally be 16)
c. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128 or 16 (before) 144 (after)
d. HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 101b = 1 (this key might not exist, if so, create it).
4. Restart
5. HOORAY. Now your phone is fully application unlocked.
-----the following procedure is to SIM Unlock, this currently does not work. Possibly spv-services will be updated at some time to work with the Monet---->
6. Now download spv_services:
http://www.spv-developers.com/forum/showthread.php?t=236
a. copy the cert.cab file to you Monet. Select and run using File explorer. it should run fine.
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
Will investigate. Anyone have any luck please say. At least we can now get the phone app.unlocked.
------------------------->
Note: I have read that the phone might again become app.locked if you do a hard reset. If this is the case, just follow the above again.
rgds
colonel said:
(...)
b. Next step. Run SPV_services from PC whilst phone still connected via Activesync. Should unlock ..... however I get checksum error....
(...)
Click to expand...
Click to collapse
So this thread should not be named Full unlock for HTC Monet :>
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
bongmaster said:
apparently wen i tell spv services to use simlock tool. it freezes at a blue screen trying to load a php.. this is after i input AGREE into the box..
it opens fine b4 that.. am i doing anything wrong?
Click to expand...
Click to collapse
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
colonel said:
SPV-Services needs to access the internet.
A php is an active type of web page.
It would appear that there is something blocking it from access the internet. Most probably a firewall on your PC, either the internal windows one, or a 3rd party package you have installed. You need to check this.
If its for the Monet I wouldn't bother anyhow as SPV-Services can not currently SIMunlock this phone.
rgds
Click to expand...
Click to collapse
1st thing i checked was the firewall..
i know wat a php is i run a phpbb forum and yea it is a Monet (lobster 700)..
shame ( i really need to unlock the networks on it ) i have an O2 sim and wen i put it in it askes for a network unlock code.. if only i had that code.. any idea how to obtain it?
the only way currently is to use virgin or a commercial service
If you put at least £30 of talk time on your virgin account, they will send you the unlock code for free.
Otherwise search google or this forum for a commercial unlocking service.
rgds
colonel said:
1. Firstly you need to get rid of the 'registry security policy' lock.
Download cert install sp.zip:
http://www.spv-developers.com/forum/showthread.php?t=425
Click to expand...
Click to collapse
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
burticek said:
Hi, I have a question. I would like to try it but the link above shows: Invalid Thread specified. If you followed a valid link, please notify the administrator :-(
Click to expand...
Click to collapse
Edit: Never mind. I have found it ;-)
Virgin Lobster
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
classicxda said:
I have followed all the instructions
I get an error when running the sim lock to as follows:
Encrypted checksum not found
I then use a vodafone sime and get Network is locked. PLease input unlock code.
Any ideas?
SteveW
Click to expand...
Click to collapse
simunlock is not working yet on the monet.
this procedure only app. unlocks
rgds
c.
Lobster unlock
What would it cost to do this?
Cheers
SteveW
just phone virgin if yu have a lobster. they require £30 of airtime to be purchased before they give you the code
Application Unlock for HTC Monet
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
leadweight said:
Hi colonel
I have been trying in vain to do an application unlock on my Lobster 700tv. I have managed to install and run the "SP_AllowCertificateInstall.cab" which went ok. The "SDA_ApplicationUnlock.exe" also ran ok. However, running PHM required a copy to be placed on the Monet which I did. Attempting to run the "setup.exe", gave the following message:
"ALERT: Setup is Not a Valid Windows CE Application"
Because of this, I attempted to change the registry keys using "Mobile Registry Editor.exe" which seemed to do the job. However, applications still wont work (I'm trying to install TomTom Navigator 6).
I have since managed to load and run "MobileRegistryEditor.exe" on my phone without problems but I still cannot get TomTom Navigator 6 to run, although it loads onto the storage card ok.
Please can you help?
Regards,
leadweight
Click to expand...
Click to collapse
I also have been trying to unlock my Lobby to no avail.
Used a couple of reg editors but when u change the values the phone comes back "Unable to perform this operation".
I also used the HTC unlocker which came back with the same message.
Lobster headache
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
leadweight said:
Hi bocsta
I had problems to start with but I had failed to read colonel's instructions correctly. I couldn't get PHM to run on my phone so I tried some of colonel's other suggestions. I found that "SGS Explorer" did load ok and I used its registry editor to change the registry keys as listed. I am assuming that my phone is now unlocked but TomTom Navigator 6 will not run.
Can someone please help before I throw my lobster back in the sea?
Regads .....
Click to expand...
Click to collapse
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Find File
bocsta said:
Colonels zip file comes nack as not a valid archive ?
Where can I find the first file in his list being : SP_AllowCertificateInstall.cab ???
Click to expand...
Click to collapse
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
leadweight said:
The file you require is "cert install sp.zip"
You can get it by clicking on colonels attached files link on the bottom left of his list.
Regards
Click to expand...
Click to collapse
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
bocsta said:
Have you tried downloading it recently The zip file says it is not a valid archive or is damaged ?
Click to expand...
Click to collapse
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
leadweight said:
I have just tried it again and it downloaded ok. I'm not sure why you have had problems - keep trying as it could be just a glitch.
Regards ...
Click to expand...
Click to collapse
Yes it dowmloads OK. I just cant unzip it. Can you try to unzip it please ?
If it fails and you still have the Zip file that you unzipped originally cann you please PM it to me ?
Thanks
Hey, could someone please send me a link and explain to me how to install the TouchFLo on my MOGUL? It would be greatly appreciated. Thanks
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Thanks a lot! What extra does the cube add? Thanks
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Oh...sorry 1 more thing, once you download them onto your mogul what do you have to do to get them to work because I have tried something similar before and the files are on my MOGUL but nothing changed in apearance? Thanks again
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
kidnamedAlbert said:
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
Click to expand...
Click to collapse
thanks for the help
no problem
on that video it shows everything being saved to the memory card. How do you do that? because it always just automatically saves all my programs to the main memory? In that video, what is it even doing? Everything is going so fast I can hardly tell what is going on. Thanks
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
does anyone have anymore info? Thanks
dcshoeco024 said:
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
Click to expand...
Click to collapse
did you put the cube files in application data? thats they only way itll work
yea i put them there
this may sound stupid but did you enable touchflo?
what do u mean enable? Like, i downloaded it and it said that it was running.......
I really like Poorlyduck Vista cube
For me a stop having probleme with the WM 6.1 and cube when installing vista-cube .cab that also contain touch flo. I run and older version tha the one ''Vista suite'' I tried hard to make this in OEM package to include in option in DCD kitchen taht i customized a bit but for now i run it from cab version. ...
ok so i followed the instructions and set it up just like the vid, went back to the today screen and no different home screen. I went to choose touch flo, and it pops up as already running. Can someone help me please
The file "xx" cannot be opened. Either it is not signed with a trusted certificate...
I keep getting this error whenever I try to open a couple applications, like Navizon, HTC Home Customizer, MS Live Search, and a lot more (but googlemaps and a few work just fine). Anyways I flashed to a DCD 3.0.1 rom I cooked... I added a few apps from the titan kitchen by copying the OEM folders into the DCD OEM folder and it all went pretty fine....
has anyone ever encountered these errors? I think I'm gonna have to cook a clean rom with just the basics and have to install everything one by one again unless someone knows what to do..
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
nickles96 said:
I had the exact same problem.
you didn't include the .NET framework in your build.
re-cook with that option selected, and those apps will work.
Click to expand...
Click to collapse
im using dcd 3.0.1 kitchen, i dont even see it listed as an option and i thought it was already built in anyway
Did this ever get resolved? I am having the same issue with Garmin and I know I have .net installed
if you are installing to a memory card, try installing to main memory... that worked for me with MusicID
Bump having this issue helpplease
trying to install or try some different Radio cabs I keep getting this error few other programs as well fairly new so I am pretty confused. oh this is is on My Kaiser Tilt though was hoping not to have to start a whole new thread.
getting the same error message
i keep getting the following error message
"The file 'xx' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
every time i do a soft reset all my installed programs get like this, and i have to reinstall them for them to work. This only happens to the applications i've installed on my own, not the ones that come with the phone.
if there is anyone out there who has a solution, please let me know.
File Explorer error on MDA Vario 2
Hello ppl
i uninstalled a game & a worldmate live program from my windows mobile in the morning.. from the very next moment i'm unable to browse through my file explorer
i click
start>file explorer
i get the following error
"The file 'Start' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
help pls..... on this issue..
regards
Prasad
SOLUTION!!!
Most of the cases this is not a CERTIFICATE problem-
if you go to your file explorer and look for the PROGRAM FILES directory you will be surprise -
actually this happens when you install cabs on the storage card - those apps write temp files all the time - so when you take out your SD card - those apps continue writing this temp files -
in the bottom line = go to your device and rename the FOLDER storage card to storage old -
now you will see the icon for your SD CARD next to the name STORAGE CARD 2-
the last thing is to remove the SD CARD an re insert it again - now you will see that it return to its original name (STORAGE CARD) .
enjoy
Thank you mate, same problem here solved with your help
uZardWebP
I m not able to rename the storage card to storage old pls help and i m getting the same error message with uzard web browser.
http://www.yourmobileblog.com/2010/09/working-solution-for-errors-like-file-cannot-be-opened/
I got the solution here, check out yourself
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
This is my first post, so apologies if this is in the wrong place or has been asked before (I have searched and found some answers, but none of these worked)
Basically, last night whenever I tried to use an application on my HTC HD2 I was getting the following error message:
"The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one if its components cannot be found. If the problem persists, try reinstalling or restoring this file."
In searching for the solution, a lot of people are saying that I need to edit the reistry. (Specifiaclly HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1)
I have tried downloading the recommended registry editors on the forums (Resco Explorer etc.) but am unable to install because the "program is from an unknown publisher." I click yes to get pass this initial message, like I always have done in the past, and the following is displayed:
Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate."
I have also tried using a program recommended called CeRegistryEditor and using my PC via ActiveSync to edit the registry, but am getting an error message "Access Denied!".
Does anybody know any other way of editing the registry? Am I actually doing the right thing? Are there any security settings that I need to disable to allow CeReistryEditor to edit the registry?
This is really bugging me, I have only been without my apps for about 12 hours throughout the night but it is hard to live without them!! I REALLY don't want to perform a hard reset and will do anything to avoid this!
When I get this I just remove evertyhing to do with it on the phone and re download it (the cab file usually) and it seems to work.
thanks for your reply. I have tried this but when I try and reinstall I am getting the message: Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate.
I think that the security settings have been changed, but I cant see how to change them with editing the registry which I am struggling to do
Can I ask what app you are trying to install? Or is it any app?
Multiple Apps that were running OK yesterday, but not today. I think it is all the apps that I have downloaded from Omarket.... Omarket isnt working either!
Hi,
Any luck on this. I m also facing similar issue after installing Android on my HD2.
I have the exact same issue after running Android from SD card. No application (non-stock ones) are working anymore. Like 3rd party certificates are being blocked or something...
For everyone with this problem, download Mobile Registry Editor and connect your phone to your PC via USB, then start the Editor and go to "HKEY_LOCAL_MACHINE\Security\Policies\Policies" and search for the DWord "0000101a" and change the decimal to "1", that will fix your problem. This problem happens to me if I "reboot" while in Android instead of turning the phone completely off and then back on.
Edit: Added link to download.
As a side note, I always did this to mine while running Windows Mobile, then booted Android after fixing the registry.
and when this is not possible
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Niine said:
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Click to expand...
Click to collapse
Hi,
I also have the same issue after loading android from the sd-card. I have also re-installed the stock rom and the problem still persists. Im also unable to install any reg editors as keep getting the "not signed with a trusted certificate".
I read that a cooked rom may be a solution around this but I liked the set up I had and wanted to keep my original rom so any other suggestions would be appreciated.
Thanks
Lee
Exactly the same problem.
Non-stock programs not working after failed boot of android from SD card, and I'm unable to change any registry entries either. Practically I'm locked out of my phone, just the basic functions working. Any help would be greatly appreciated!
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
I have the same problem, just remove the program that was not working, pull out your memory card , then delete the files in the sd card except the application installer, hard reset your phone, and remember to go to SETTINGS-UPDATES&FEEDBACK-ERROR REPORTING-DISABLE ERROR REPORTING, and turn off your phone, put in the memory card and turn your phone on and install the application one by one, the application installed will work as normal, Good Luck, remember to back up your data before hard reset
larrytango said:
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
Click to expand...
Click to collapse
i tried this methode but unfortunately this message pops up all time:
"phone is not unlockable"