I've owned a Touch Pro for a few months now and overall it's a good device. It has its quirks, but then again what phone doesn't? There is one problem in particular, however, that I can't seem to figure out. I've searched up and down in XDA Forums, and on Google, and I just can't find out a fix for my data connection always turning on for no reason. I have all my e-mail accounts set to "manual send / recieve", the weather program set to "update weather manually", and as far as I know there are no other programs on my phone that have access to the internet without my permission.
The problem I have is sometimes I will wake my phone up from its sleep mode, and I will discover that the data connection is active and appearing to be transmitting. Also, EVERY time I restart my phone and it goes through the boot process, the data connection will re-activate even before TouchFLO 3D opens up on the today screen. It's really annoying, because I have no idea what's causing it to do this, or why it does it at random times, or whenever I reset my device.
Does anyone have any solutions to this problem? I hate having to manually go in periodically and make sure my data connection is set to "off", instead of having it stay that way when I set it.
So no help on this one then?
I don't have a solution but I can help by bumping your thread and saying I have the same problem on Verizon. I was at a friend's place all weekend, and he has wifi all over, so I turned off data and used his wifi instead. Well sure enough all weekend my data connection kept turning itself back on. It seemed to happen only when going into sleep mode. So I kept the phone plugged in so it would never totally "sleep". Wifi stayed connected with no data connection starting automatically. Annoying especially considering the 5 GB data limit on the PDA plan.
Well I'm glad I'm at least not alone on this one. It's weird too that even though your device is on a different carrier, it still does the same thing. I wonder if it's a hardware issue?
I know that someone has to have an answer for this...
go into pocket express and press menu then go to express settings then on the top left theres a pulldown press it and go into auto updates and turn it off.. pissed me off when i got the phone.. couldnt find a fix till i started going through all the programs to find the one doing it.. and it was the stupid Pocket Express
I have had my MDA Compact V for a few months now, and it's only recently that I've had the same problem. Each time I switch on, my data connection starts or alternatively if I loose signal then get it back then I see my data connection is on again. Thankfully I have the Solo 20 package with unlimited net usage (although you're are limited to 1Gb/month) but it drains my battery really badly.
I went through every possible setting and program to switch off location settings or auto downloads/updates and I still have the same problem, but I downloaded Data Controller v1.00 from Freewarepocketpc.net and I can toggle my data connection on or off as I please.
Heres what you need
Install below cab, then use the NODATA app, select what you want off, PHONE AS MODEM and DATA are your two options I believe... Your data will never come back on... until you re-enable it that is....
PS... THIS IS NOT MY CAB, THIS IS SOMETHING I FOUND WHEN TRYING TO ADDRESS THESAME PROBLEM YOU ARE HAVING. THIS CAB WAS DOWNLOADED FROM MoDaCo BUT I DONT HAVE THE LINK... ALL RESPECTS GO TO HIM... I AM JUST SHARING WHAT HAS WORKED FOR ME IN THE PAST...
Seems it's one or the other
What sucks is on my Sprint HTC touch pro 2 (cdma), I was having a problem where I couldn't answer calls all the time, but sometimes I could, and eventually found that it was always when the data connection was showing active is when I couldn't answer a call. But when that was happening, my data connection would turn back off after a few seconds when I was done using it. It was driving me crazy not being able to answer my calls and I finally found a post that let me correct that problem, it was changing the HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume value that fixed this problem... the value of this registry setting was originally "GPRS_bye_if_device_off". This setting made it so the data connection would turn off when not being used, but it apparently messes up cdma phones from being able to switch over to answer an incoming phone call if the data connection is active. I changed this registry entry to "#777" as the post said to do, and sure enough, that corrected the problem with being able to answer my calls if the data connection is active. I'm real happy to have that working now, but when I changed this setting, my data connection is now always showing active (white arrows showing in status) and even if I turn it off manually, it comes on by it's self way more often than the every 4 hours I have it set to check emails.
There is a registry setting called CacheTime under the same Settings key as the above mentioned registry entry that I changed, that when the "GPRS_bye_if_device_off" value is used, the CacheTime key value will indeed control how long the data connection stays on before automatically turning off. But When I change the Entry to "#777" which is necessary to allow me to answer calls when data is active, then changing the CacheTime value has no effect and the data connection stays on until you manually turn it off.
I'd like to find a way to turn the data connection off, while still not messing up me being able to answer calls when the data connection is active, and seems to me that if both of these things can be done separately with two different registry settings, that it must be possible to do both.... so if any of you tech wizards can find a way to do this, I'd love to see it!
Possible Fix?
Hey, I have noticed the same problem. It is annoying from a battery life aspect as well as a system slowdown when coming out of sleep. I could not find much of a workaround except one of the settings in TD3 Tools I installed. In the "Data Connection" tab you can yurn on an option that makes your "End" key also terminate an active data connections. So if you hit it after waking your phone you won't have the annoying slowdown with your Sense UI...
Hi, I've searched extensively on this and other forums about this issue with no luck...
My problem is my HD2 (1.72.841.0 telstra ROM) has stopped suspending when unplugged from AC power. Changing the backlight settings from sound & display doesn't help. This modifies HKLM/SYSTEM/CurrentControlSet/Control/Power/Timeouts/BattSuspendTimeout to the corresponding number of seconds. However, the phone stays on. I would have thought I have a hardware problem where it thinks it is still on AC power, but other battery-specific tmings, like dimming screen, are working.
Setting BattUserIdle to some values works (it either has to be <=120 or <= BattSuspendTimeout, haven't worked out which). However, something is resetting this to 0 after a while and I don't know what or when.
This is killing my battery life & driving me nuts. Manual suspend is not a good solution because it stops music playback after current song. Does anyone have any ideas what might be going on?
I've done a little extra testing on this problem. By setting the AC power suspend settings to five minutes I've been able to confirm that the HD2 isn't going into suspend from AC power, either. BattUserIdle, and the backlight dimming settings, must use a different set of rules to decide when the device has been idle. So I'm suspecting there is a process/service running on my HD2 that is keeping it awake. The question would be what? The only things I can think of that have changed just before the problem started is I installed Schap's Setup VoIP (v0.3), and I set up a push email account through windows live. I can't uninstall Schap's Setup VOIP (uninstall fails); I'll give disabling the push email a try...
Well, after trialling disabling Windows Live push email it looks like this is the culprit. I take it BattUserIdle must be the time from last user interaction to standby, while BattSuspendTimeout must be affected both by user interaction and by certain system activity. Push email keeping it awake must surely be a bug. Has anyone else been using Windows Live or other push email? I'd like to hear other people's experiences on this.
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off) - UPDATE: I see now this one will not work in the HC OS as the system requires user interaction to set GPS
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Never heard of that but it sounds like an awesome app
Sent from my Transformer Prime TF201 using xda premium
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Haven't gotten my Prime yet, but that Tasker app sounds pretty cool. It sound kind of like JuiceDefender, except there's a lot more options.
With those settings, what kind of Battery life do you get?
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Lock-N-Load said:
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Click to expand...
Click to collapse
That's epic.
Sent from my Transformer Prime TF201 using xda premium
Tasker is pretty awesome!
A bit of a learning curve, but once you figure it out, the sky is the limit.
I have a profile that if I receive a text while driving, it autoresponds telling the person texting and driving is dangerous and I am currently driving at xx MPH and will get with them later.
I get a lot of people inquiring about that one.
The most useful one I have is it looks at my calendar and if it is during the time of my meeting, it automatically puts my phone on vibrate. That way I don't have to worry about it. When meeting is over, it reverts back to normal.
Yes, tasker is INCREDIBLE. Once you figure it out, it can almost double your battery life (at least it did on my phone).
You can try reddit.com/r/tasker, where most people post awesome tasker profiles and ask for help accomplishing certain settings. There are also a ton on the internet if you google search for tasker set-ups:
http://tasker.wikidot.com/profile-index (this is a great one)
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Tasker is one of the defining differences between ios and Android. Really shows off how powerful android can really be if you're willing to take the time
OP wanna post your profiles? And maybe a quick writeup (or link) how to apply them for those who dont know...
I used to use tasker for BLN to enable notifications from various apps that normally didnt work with BLN, as well as making my phone vibrate every minute or so if theres a missed notification (text, etc) for aprox 5 minutes just so that way if i was with a customer at work (retail) i could deal with the customer but wouldnt forget about the messages i got
Awesome app indeed.
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
Put a small SD card in the dock. Have Tasker check when it mounts/unmounts.
Might not work since there's no notification on unmounting /Removable/SD. Maybe have it check for access to /Removable/SD every X minutes?
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
if you are rooted, keyboard manager is a free app in the market that does this. when im not docked, i gvet thumb keyboard 4. when i am docked, asus stock. hasnt failed me yet
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
I have 4 profiles that I copied from my phone to do the same tasks:
Home: When near my Home wi-fi AP, turn on wi-fi. When no longer near the AP, turn off wi-fi.
Sleep Mode: Put device on silent, turn on airplane mode (11PM-5AM).
Work Location: When near my office wi-fi, turn on wi-fi, turn on silent mode. When no longer near the AP (i.e. not at work), turn off wi-fi, turn off silent mode off.
Work Timer: During work days/hours (M-F 6-3), turn silent mode on. After work hours, turn silent mode off. Exception: if there's an event with a description of "Vacation" on the calendar. If that exists, device does not go into silent mode.
There are others that I use on my phone.
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
BRILLIANT! I have actually seen no use for tasker for myself til now. I've always REALLY liked he concept, but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
stretchwookie said:
but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
Click to expand...
Click to collapse
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Lock-N-Load said:
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Click to expand...
Click to collapse
i understand how powerful this tool can and is. but i shut my prime off at night... there is no battery to conserve... lol sorry. im glad it works for you guys though! it REALLY may be worth investing the money into though JUST for microsd unmount alerts.
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Lock-N-Load said:
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Click to expand...
Click to collapse
i believe you are correct. but i am not very imaginative. so its very possible that i cant just find a use for it, doesnt meant that it isnt there. i plan on doing some research into some of the already made profiles to see if someone interests me. so far, the unmount microsd seems to be the only plausible for me
Not sure how I missed this thread before; I'm a huge fan of Tasker. All of what follows was written for my Samsung Epic 4G: I don't even have Tasker installed on my TFP because so much of what I do is smartphone-focused. Sooner or later I'll get around to putting together some tablet-specific scripts.
Surreptitiously snaps a photo from the front-facing camera every time the screen is unlocked, with no visual or audio indication. This is set up so as to always keep the last 2 photos stored, and will overwrite older photos. Images can be retrieved remotely via a secret text message.
Set up secret text messages that trigger the phone to gather information such as GPS location (reverse geocoded to an address), speed, heading, altitude, local cell tower ID and signal strength, nearby and connected WiFi SSIDs, WAN IP, currently open app, whether the screen is turned on, battery strength, and covert photographs taken from the front and rear cameras (including the one that was captured from the front camera when the screen was last unlocked) and text/email me back without notifying whomever has the phone. Another message will make my phone freak out, announce it's been stolen, announce that all of the above information has been sent to the owner of the phone, flash the LED in an SOS, and force all outbound calls to go to me.
If I send a secret message to my phone, it calls me back, and enables speakerphone, so I can speak with whomever has my phone. It also reroutes any outbound calls to my number. I can also ask it to send me photos from the front and rear cameras on the phone.
Ensured that when the phone is connected to my home's local cell tower, it always rings when I call it. I never have to worry about it being on vibrate while under a couch cushion or in a snowbank next to the driveway.
When I plug in a headset or it connects to my car's bluetooth, it pops up a list of media applications for me to use, and if I don't select one or back out of the selection, it automatically starts my Pandora, and kills the app when I unplug / disconnect. Basically, I get in my car, my music plays. I get out, it stops. Same with headphones.
When it detects the cell tower near my work, it enables vibrate.
If it detects a cell tower that is not the one near my home or work, it turns on the ringer and disables WiFi (unless I re-enable it).
If someone calls me that I don't even want a voicemail from, I add their number to a list in Tasker, and when they call me, it picks up the line and immediately hangs it up. Working on one that will play back a fake "Your call could not be completed as dialed" message.
Checks accuweather.com in the morning on work days to see if it's raining, snowing, sleeting, or hailing. If any of the above, it rings an alarm 30 minutes early. I also built in snooze functions and a voice notification in the morning about the outside temperature and conditions. This script recently broke (accuweather probably did something to affect the output of my HTTPGet) so I've been using the voice notification in Alarm Clock Plus, though it doesn't wake me up early. With current weather conditions I'm going to have to get my script fixed for the head start. My how-to on this script is on Tasker's wiki, here: http://tasker.wikidot.com/weather-clock
If I start Google Navigation with GPS disabled, it closes the app, enables GPS, and starts the app back up again. No more fiddling with GPS settings while on the go. Sometimes this script is not 100% reliable... I've got to look at it again some time to figure out why.
I made a blog post a while back about how to take the pictures remotely with the camera, and you can read about it here:
http://sean-the-electrofreak.blogspot.com/2011/10/more-fun-with-tasker-covert-mugshots.html
The email-attachment part can also be used to send audio recordings, which I've not actually implemented yet but wouldn't be difficult.
I've been putting off for the last 6 months or so my write-up on all the rest... I just have to find time for it!
I'm configuring an old Galaxy Fame to serve as sat navigator fixed on my car dashboard, aiming at using the always-up-to-date and free OpenStreetMap.
When I turn the key, the phone's usb is powered at 5V, when I turn off the car, the usb has no power. The phone is able to detect these events and I scripted some actions upon them, aiming at providing an instant-on and instant-off navigator service.
The phone remains always on, just switches to a power-save status when the car is off. The navigator app – OsmAnd – starts automatically at boot, but boot does not occur between a car-on / car-off cycle, because the phone remains on to detect the mentioned usb changes.
Currently, what happens when I start the car and the usb gets powered:
Display is lit (echo 200 >/sys/class/backlight/panel/brightness)
Sat receiver is activated
Cpu frequency set to max
What happens when I turn off the car and usb loses power:
Display's backlight off
Sat receiver goes off, along with wify and bluetooth, in case they might have been active
Cpu frequency set to minimum
Up to this point everything is working. My problem now is that, when the car goes off and the phone enters this quasi-standby mode, the touchscreen still accepts input and, if the phone is handled or touched for whatever reason, it will stealthily react to those commands while the screen is unlit.
So I'm looking for a practical way to disable and re-enable the touchscreen – and possibly some or all the physical buttons – via the command line. Maybe I can unmount some kernel module?