i have an HTC Headphone set, that i got from a touch diamond, apparently when i was using it earlier the person on the other line was saying that they could hear static but when i used the USB Dongle with a pair of 3.5mm headphones they dont hear the static anymore, then i try to plug the headphones on the usb dongle along with the 3.5mm stereo headphones, i unplugged the stereo headset and left the HTC headphones on there, and the person said they dont hear static but when i take it out and just put the HTC headphones back in to the phone they could hear static
is there something wrong with the microphone on the headset? because i flashed a different ROM and still the same, but the good news is, is that i can hear audio from both ear pieces
plz help me out, thanks
I've had this happen to me before. Don't know why but a simple soft-reset seems to do the trick. BTW have you modified the Audiopara csv file to increase or decrease your volume in anyway? MAYBE that has something to do with it but don't quote me on that.
That stupid flimsy connector is breaking......well the wires inside are. I've been through 2 in 6 months
Related
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Finally I've made a move. TyTN X Sony Crossover Custom Headphones.
I've used a solder to remove the original earbuds wire and soldered a pair of cut SONY MDR-EX71SL headphones on. They sound 100 times better than the stock ones. This will ease my frustrations for now. I was tempted to solder my MDR-EX90LP on but they are $100 a pair. Too much for now
Later on I will try to rework the stock mini USB headphone and make a 2.5mm connector for it so I can use all kinds of headphones(with mic) and connect to a speaker system as I want!
EDIT: It appears that the original mini USB headset has 6 wires, 4 should be for the headphones and the remaining 2 for the mic, I can simply cut up the wire right after the mini USB port and connect the 6 wires to a standard cell phone headset 2.5mm connector then I should be able to connect the TyTN to all kinds of headsets![/img]
Arent you essentially doin this? http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html as seen in another post, seems like the most universal way to solve the problem.
I do like the way you built a set without a plug, cleaner..less cord and weight, but I know myself, I go through a pair of headphones about every 2 months on my mp3 player, Id hate to have to redo the soldering everytime, I expect with the headphones being such an issue for most peple that the market will be flodded in a month or so with headphones for the tytn, or atleast adapters, shoot, the one guy in the above url even offered to do it for free, as long as you bought the plug.
is there still no adaptor available to buy?
i just do this way........
can swap any earpiece....
crash74 said:
i just do this way........
can swap any earpiece....
Click to expand...
Click to collapse
@crash74
Looks very good, even more solid than the other solution, but how do you open the unit to reach the print, is their any trick?!
Can i also use the new connection as a line-out for little active stereo boxes, or is this to tricky for TyTn/boxes?
worked like a dream i have no more crapy hissing inbetween tracks and now i can play my song thu my hi-fi that 1 to the modders and 0 to htc
Adapter usb to 3.5 jack
Go to semsons.com, they have the adapter
qing84, I have the same headphones as u=) firstly I solve this problem like you, but I smash the small "black box"=) with mic and volume control, and i was need connect my mdr-ex71 directly to TyTN without "black box"=(
I was glad that i did it, because sound became much more louder, and more clean...
qing84 said:
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Click to expand...
Click to collapse
umm...you could have just bought this.... http://www.cellphoneshop.net/auadforci85.html
i think its a good idea to replace the head phone leaving the mic in workin condition.as there is no connector is still available at least in my town.i ll try it tomorrow.thanx dude
Does anyone know if the HTC P3350 W100 Wired Remote Control
http://www.expansys.com/htc/p_htc_item.aspx?i=147564[/URL]
will work with the Cingular 8525 (Hermes, TyTN)? This is sold in Europe and can be had in the US from Mobile Planet which seems to be the same as expansys.com.
On the European HTC site there is also a media fix that may apply to this accessory as well as the Y connector.
HTC audio Drivers
Downloading and installing this driver update will provide your HTC mobile device with the latest available optimised software for use with the following accessories:
YC A120 Y-Cable adaptor
The hot music setup for Mogul and 8525
I just purchased the HTC RC W100 Remote from Mobile Planet. It connects to the phone's extUSB and provides a 3.5mm headset jack that carries the mic port out to the connector. It has a 36" cord so there is a lot of cord if you have a long headset cord.
The head has controls for fast forward, pause, +/- volume and you can answer/end calls, mute and put a call on/off hold. This assumes that you have a mic on your headset to talk into.
The http://www.Europe.HTC.Com site says it is for the TyTn II but it seems to work with both the 8525 and the Mogul . . . It is not on the USA site at all.
I use the Sure SE110s stereo headset (individual internal sub-woofer component) and added their MPA-C cable that has a mic in it (Thsi would work for any headset). I have not found any other solutions that wok this well.
The standard headset really has poor quality and is uncomfortable for my ears. Bluetooth is either a mono headset w/ mic or a stereo headset (no mic) and the battery life is unpredictable.
This way I can ride my bike and control my music while the Mogul stays in my camel-back and when a call comes I can actually answer it and then go back to listening.
Very cool setup.
So this doesn't solve the headphone problem? Can't I just buy this and a pair of headphones? I don't need handfree anyway
E: Why a 36'' cord? I totally lost interest
Headphone Problem
N1c0_ds said:
So this doesn't solve the headphone problem? Can't I just buy this and a pair of headphones? I don't need handfree anyway
E: Why a 36'' cord? I totally lost interest
Click to expand...
Click to collapse
N1cO;
I do not know what headset problem you are referring to but this is definitely a solution if you want to listen to music with a good stereo headset. I just happen to like the Shure stuff because they eliminate some road and wind noise while I am riding my bike or skiing. Also the higher end ones actually have miniature tweeters and sub-woofers built in.
All you need is the W100 and any headset with a 3.5mm jack.
As it turns out, I just found out the unit has a built-in mic and that eliminates the need for a more expensive headset that has a mic. There was nothing in the manual that came with it that talked about the mic! So RTFB does not work!
It also comes with a small disc that has the driver in it. I tried to install it on my Mogul but it said that I had the latest driver . . .
As far as the 36" cord, my Shure headset comes in 2 pieces, the earphones are on a short cord so it is not too long. If you had a standard headset, it might get a little long.
The other side of the Shure headset has the connectors that go into the device(s). This way you can have several different connectors for different phones, MP3 players, etc. Blackberry's and Razor's have different jacks and most cell phones like the HTC 8125 (Cingular) use a 2.5 mm jack.
Hi guys,
I recently lost my Shure SE420's and have upgraded to a set of Ultimate Ears Triple Fi 10 Vi IEM's. I bought the 'Vi' version as it has a built in mic for handsfree and a button to answer/hang up. The box said for iphone and blackberry compatible but I assumed the x10 would have no worries as its the same 3.5mm jack.
Turns out I cannot use them as the button appears to be inverted for the x10 / Android, ie its permanently in 'hang up' position. Tring to make a call immedialty displays 'call ended', but if I hold the button down it allows me to call out and releasing it hangs up.
Listening to music is terrible, it sounds robotic and keeps chopping the sound, but when the button is pressed it works fine.
Tested the headphones on my old HTC Touch HD (wm6.5) and a friends iphone and they work perfectly so appears to be an android / x10 issue. The only work around to listen to music is using a 3.5mm extender which doesnt use the mic (one less connection on the jack)
Is there something ive missed in the settings or does anyone know a workaround? Its driving me nuts!
Thanks
its because the wires dont go to the same conections in the x10 compared to the iphone, if you know what i mean. there is no setting because they are hard wired. if you are good with that sort of thing you could make an adapter, afaik that would work but its a lot of hassle.
Does anybody have a headphone with build in mic that actually works on the X10?
yea my stock sony headset that came with the x10 have built in mic and they work fine....
-------------------------------------
Sent via the XDA Tapatalk App
Really? What model headphones are those? The ones I got with my X10 came with an extension remote/microphone that you can use with any headphones, but the extension makes the cables too long so I'm looking for heaphones with the microphone build in.
I tested my Ultimate Ears Triple Fi 10 Vi on an EVO before I bought mine and they worked great. They also worked until around the time of the latest OTA update. Now they don't control music or answer phone calls. I highly doubt the headphones broke but I ordered a replacement cable just in case so hopefully that's it but I suspect they broke something with the update.
Hi! I was wondering of an app that can live monitor my voice on my omnia, in other words I want to hear my voice on the headset so I can connect my phone with an amplified loudspeaker and hear my voice live (without delays) in the loudspeaker. Is that possible? That wold be cool, turn your phone into a speaker system. Please if you can do a reserach and give me an answer, thank you!
mic in headphone jack?
So, does the X10 have the 4 connector-type of headphone jack? Mono headphone jacks have only two conductor areas separated by an insulator; stereo headphone jacks have a third zone; and there are some devices that use a fourth zone adding a presumably mono mic to the mix.
I've been thinking Bluetooth is the only way to add a mic to the X10.
I have one of these mic/headphone combos for my ipod (for skype) and it does the same thing with my X10. I found that if I plugged it in the X10, then pulled it out by about 2-3mm, it worked fine for audio and microphone, but the button would be inactive. Best workaround I can think of.
the original headphone with mic is the best, don`t need to change it
wow so now my skullcandy's w/mic decide to work on pandora radio..
I found this adapter, which might be a fix for the hard-wiring. It's called "FiiO LU1 smart adaptor cable converter".
I am also looking for a wired headset (not in-ears). I know the one from Koss iPorta Pro isn't working.
Today, I found this other one, pretty cool, which claims to be working for most sonyericsson phones: Cresyn C550S black.
Not sure if the adapter is needed though. Maybe it would fix the problem with the
Let me know if you are using any nice wired headphone with mic that is working with x10!
Alright, my friend has a blackberry and when he's listening to music and his phone rings he can hear it ringing through the headphones. Not only that, he can answer the phone and hear the person in the headphones while talking to him. He basically holds the phone in front of his mouth and talks with his headphones in. Also he doesn't have a mic on his headphones.
I've always wondered if this was possible with the x10. When my phone rings and im listening to music my music stops but the phone rings out loud and not through the headphones. I tried to answer it and see if I could hear them through the headphones but I can't and the person who called can't hear me either unless I unplug them.
Is there any way to fix this so I can hear the person through the headphones and talk to them by talking into the phone?
Sorry if the post doesn't make any sense, I'm tired as hell, just got back from work.
Your head phones come with a mic, imo I think that's better than holding the phone to your mouth.
Sent from my X10a using XDA App
I understand that the default headphones come with a mic, but they never stayed in my ears, which is why I use my own in-ear headphones. I want to be able to use them to listen to the call tho.
But the default headphone cable that comes with the phone has a headphone jack to plug in any headset you want to it, and still have a mic?
I've fixed all my headset issues by buying a £10(roughly) wireless headset adapter off eBay. roughly 12-14 hrs battery life out it (so lasts about a week with moderate usage as I mostly use it in the car on 1-2 hr journeys and do them once or twice a week). Good buy!
Hi Hypercore,
We seem to have gotten our phones from the same place. The default headphones came with a removable mic. When I got mine, I had headphones (with a 2 contact TRS 3.5mm connector + a shorter wire with a microphone that sports a 3 contact TRRS connector).
Heres's the way the tips rings and sleeves work (I think... correct me if I'm wrong)
The headphones TRS
Tip: Left
Ring: Right
Sleeve: Ground
The "Mic TRRS jack"
Tip: Left
Ring1: Right
Ring2: Mic
Sleeve: Ground
So you need a TRRS connector that includes a mic + TRS Headphones or a set of TRRS headphones that include a mic built-in.
There are some pics on wikipedia, just search for TRS connector.
Hope this helps.
I know what you mean, the mic comes with the phone but when I hook my headphones up to it the wire is WAY too long.
Boohoo, just bundle it up a few times and put a rubber band around it keep that end in your pocket.
I just snipped the headphone's wires, slipped some shrink tubing, heat wires up with a lighter (to remove the "varnish/wax/stuff" they put on the copper wires these days), solder, slip the shrink on top, heat up one last time and voilà! Headphones with a short wire.
Hurray!
I have to admit that the mic wire + normal headphones make for a really long wire.
I have the official Samsung cardock, and connected it to my car radio (the cardock has a 3.5mm jack output). Nice, now I can listen to the music on my phone over my carspeakers!
BUT:
Whenever I make or receive a call, the sound of the conversation keeps channeling through the phone's own external speaker. Disabling the phone's external speaker (either during the call or beforehand) does not fix it. It just néver get's through the 3.5mm jack output to my car stereo. Annoying, since my car is pretty loud when speeding.
[Q]How to channel the audio of a voicecall to the jack-output? Does anybody know of a fix for this? I have looked around-and-around-and-around, and have asked this before. Just can't believe I'm the only-one that is bothered by this!
I AM NOT LOOKING FOR BLUETOOTH-CARKIT-SUGGESTIONS, no matter how nice you guys mean it
Anybody any idea?
Nobody no ideas?
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
rickgillyon said:
I would like to do this too, speeding along the motorway the phone speaker is just too quiet.
Click to expand...
Click to collapse
Ah, at least I'm not the only one... Now let's hope some dev is bothered by the same problem
I guess this is gonna be one of those unanswered questions...
Bump-bumptie-dum
I recon if I bump long enough, someone with the solution should notice this question sooner or later; Although I realize that moment might be somewhere around 2015, with an answer like "Buy a galaxy S9 mate..."
Anyone?
Is the S9 there yet? Or else a solution to my problem?
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
EzDingo said:
I have a std aux input into my car stereo. Plugging a stereo 3.5 lead from the phone jack into the stereo aux I can listen to all sounds from the phone over all car speakers including calls... Just like when a headset is connected. Calls go over car speakers and phone mic picks up voice.
It would seem then that its the official samsung dock being treated different to a simple direct lead connection.
My only gripe is during calls the phones mic works but thinks its on a std call and is a bit weak. Wish I could force the mic into speakerphone mode or the levels associated with that mode anyway. Btw... Turning on speakerphone while lead is connected stops the output over the speakers.
I have a trrs mic / stereo splitter adapter and a seperate car 3.5 mic but again the mic levels on the phone in headset mode need boosting.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hmm... So maybe if I use a splitter to merge the signal from both the cardock AND the phonejack...
Thnx m8! Not entirely what I was looking for (one more thing to do when plugging in my phone in the car), but it just-might-work!
Will report back
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
EzDingo said:
Just note I do not 'need' the splitter to make it work. Without a splitter it works just fine using car speakers and the phones mic (as the aux lead is std audio lead only - not including the third ring position for the mic).
I just got the splitter to use a seperate external mic in the car. The splitter simply has all 3 rings to make phone think its a full headset connected like the set that comes in the box with the phone and splits audio and mic into 2 seperate connections. This way I then take the std aux lead from the audio split to the stereo for listening over the car speakers and use the mic split for plugging in any std 3.5 external mic.
Click to expand...
Click to collapse
I understood that, it's just that I would probably need a splitter in my specific situation, since all my music gets played through the cardock by default as soon as I plug in the phone... It's possible to disable this automatic switch of audiorouting when the phone get's plugged in though, but somehow it just doesn't feel right to NOT use the audio-out feature of the cardock