Related
I've been trying for several months now to unlock my XDA1 Wallaby without success. I've loaded the Special Edition ROM 1.2 on my device and followed the Wiki instructions:
"To use XDAunlock.......tranfer XDAunlock.exe to any directory on your device using the 'Explore' funtion of ActiveSync. Run it and you will be prompted to ask if you really want to unlock, and then it's done".
I loaded the XDAunlock program into the Program Files directory of my device. However, when I click on XDAunlock.exe it gives me 'error getting unlock code'. It all sounds so simple but it just doesn't seem to work and nothing in the instructions relates to this error. Can anyone help. I'm even prepared to call anywhere in the world if someone has the solution.
Thanks
The special edition rom should unlock automatically, the xdaunlock is part of the rom so there is no need to transfer the xdaunlock program to your device. If it doesnt execute xdaunlock on first boot after buring the special edition rom you can run it from the programs list or explore for it. Have you tried a different sim to see if in fact it is unlocked?
Hey, thanks for the quick reply.
I'd already tried what you suggested and it's what I understood should happen but it didn't. It didn't automatically unlock on first boot and I was unable to find it in the Programs list so I loaded XDAunlock directly into my Programs Files directory. I then located it in File Explore and clicked on XDAunlock.exe, which is when I got the error. The reason I'm trying to unlock is that I was formerly a TMobile subscriber and recently got a cheap Motorola when I switched to Cingular. I've tried both SIM cards in the device with the same result. I'm at a loss but want to try everything I can to avoid forking out for a new device.
Which Radio Version do you have?
Stefan
Stefan,
I don't know which version I have but assumed it would be whatever loaded with the Special Edition ROM 1.2. How do I check?
David
Radio Version can be seen via Settings -> System -> Device Information
The Radio Version is independent of the ROM Version.
XDAunlock do only work with special radiostacks together. So there may the problem why it isn't working for you...
Stefan
I'm apparently using Radio version 6.25.02
Geordie said:
I'm apparently using Radio version 6.25.02
Click to expand...
Click to collapse
That´s why it isn´t working.....
Try these instructions....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
Stefan
Stefan, I don't know if you are a beer drinker but I owe you one. Your suggestions, once I changed the Radio version worked like a charm. Now I just have to find the best OS for Cingular here in the US.
Thanks again for your help and don't hesitate to let me know if you get to New York for that beer.
Glad to hear, that your device is well working....
In my opinion, on of the best ROM is the 4.01.12 Version. Its a WM2003 ROM including wmodem to use the Wallaby as modem.
Don´t know if you have already read anything of the ROMkitchen, but there you can include some applications diretcly in the ROM.
YOu can create your own ROM here:
http://lumpistefan.dyndns.org
Stefan
PS: Don´t know if i will ever be in New York, but drinking beer sound great. ;-)
So many Things and hardly any experience LOL
tried downloading the special edition rom from The site but It must either be down or not there any more. any one know where I can get it elswhere?
I also have a SIEMENS SX56 with a Simcard from AT&T, bad thing about it is I switched to T-Mobile and now I get a sim Lock SID password box.
Have no clue where to start. Definately needs unlocking.. Now does it make a difference if the T mobile sim card or the AT&T sim are in the PDA?
So many Q's..
Thanks in advance for any assistance
RATTLER1
I tried both links referred to in the thread and they worked. I'm assuming you have a cable connection as the Special ROM is 15+MB and would be a problem to download if not. Other than that, don't know what to suggest other than going back to ATT/Cingular, which I find much better than Tmobile after four years of frustration.
Good luck
Please dont tell me to read the other threads on this issue. Your better off skipping this topic and moving on to the next. I preffer this to go untouched with no replies than to have smart ass comments. Ive been reading pages and pages on how to do this for weeks with no luck. Theres about a few dozen options and with all the suggestions I have no idea where to start, nor what programs to download first, understand what these terms mean, etc. Maybe this isnt my cup of tea and I shouldnt even be attempting this but thats neither here nor there cause the fact of the matter is I screwed things up. Now Im looking for some help from the community.
Its getting real expensive and I need a serious expert who has patience and is very thurough. This is my second unit and I still have the 1st one that is still bricked as well. This is the situation for both. When I go to setting>system>device info, there was no radio version, no protocol version, no IMEI, and the call duration info was zero. I was able to use both units for thier PDA functions but not the phone prtion. I was attempting to SIM unlock and SuperCid em both. Now they are both stuck in bootloader. Im not sure what went wrong but I have done 3 other 8525's with success also updated roms and reverted back and no problems. I just cant seem to get the bricking undone. Now Ive done tutorials on housing swaps, step by step and provided pics as well. You know what, people still ask how to do it. Its a fact guys. some people just need a little more direction than others. What Im trying to say is Im looking for help not criticism, Im a grown man and the last thing I need is for some young punk to flame me,or telling me to read cause Its already been done. I can easily buy another phone but Im willing to learn how to get out of this bricking crap. So its back to reading. TIA
Heres How You Do It
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
ivan345 said:
I know how you feel because last night i bricked my 8525 cingular, Okay, If You Can Start Up Your DEvice All You Have to do is reset it to te factory condition and that would help you, unfortunatley all of your data would be lost, but its better than a bricked expensive phone. Oh, but your stuck in bootlaoder, well i have good news for you your not bricked your just stuck, go to the att website and a download and update and the update should recogize your phone even though the computer dosent, after that you have a brand new updated 8525 and that should get you out of bootloader.
Click to expand...
Click to collapse
Really??? This seems too easy. I'll try anything at this point. So you say its not bricked,just stuck in bootloader? So there is hope? Thats def bice to hear. I'll give it a shot. Thanks
LOL. Tried and and same problem. It sounded too good to be true. Thanks for the tip though
I'm not trying to be smart (believe me, I'm not equipped to do that!) just trying to help determine the exact state so that someone may be better able to help.
You say the phone's are stuck in bootloader, but that you're able to look at the device info on them, and use them for their PDA side. I always thought stuck in bootloader meant that when you switched it on, it came up with the multi-coloured bars but got no further (as if you'd reset it while holding the power and side OK button). Do you mean that the phone's work as normal but have no PHONE side of things, or can you get no further than the bootloader screen when trying to start them up?
Like I said, not trying to split hais just trying to get the exact symptoms for someone cleverer than me to help.
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
1. Which is your SPL version?
Put your hermes in bootloader mode (side ok + power button + softreset), the SPL version appears in yellow letters on the upper side
2. Which is your radio bootloader (HTC_BOOT) version?
If your radio version is <=1.27 your HTC_BOOT is 0106 or 0107, the only exception is Softbank X01HT 1.14 radio which has HTC_BOOT 0108
If your radio version is >= 1.30 your HTC_BOOT is 0108
If you don't know which is HTC_BOOT, but you have bootloader 1.01 MFG, 1.10.Oli or 1.04 you can access to the radio bootloader using the command 'rtask a', then type 'rversion' and hit enter (you won't see anything in the screen when you type rversion, because the radio bootloader has no echo, this is normal).
3. Is your device able to boot Windows Mobile OS?
This one is easy: If can you see your today screen and use your phone as a PDA means you can boot OS. If you only see the splash screen, bootloader screen (tri-color) or windows mobile splash screen you can't boot OS.
4. Do you see "No GSM" message in red letters on the first splash screen?
Reset your hermes, you will see some numbers and letters appear in red and disappear after a few seconds... your radio version is there, but if your radio is corrupted for some reason, you will see 'No GSM'.
5. Does your OS rom have KITL enabled?
Hold COMM MANAGER and POWER buttons together and reset with stylus, if you see the message "Select KITL Transport" your OS rom has KITL enabled, otherwise not.
Click to expand...
Click to collapse
Please post the answers back here when you are done.
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
jeffreyj900 said:
Stu has an excellent point. Need to know the exact state of the 8525. Exactly what you have done to it....
Example: I used Pof's free HTC SIM unlock and SuperCid program. It appeared to complete successfully. However, now when I start the 8525 up it automatically goes into the tri-color boot loader screen. I had not applied anything else to the 8525 prior to trying to unlock it.
Also, there is a sticky for dead hermes. I bricked mine as well, and was able to get passed it. I posted in the sticky. If you post in that sticky, then someone else may benefit from what you find out. Keeps everything in one place
Click to expand...
Click to collapse
Yeah, but, if you used V3a to unlock it, you actually got Oli's BL as part of the deal--hence why you can unbrick it easily!
WELP no smartass comments HUH? Well if you ****ed up 2 phones like this you really must be doing something wrong there buddy. your phone is not stuck in bootloader if you can see the device info thats for damn sure. first thing load SPLV7 on your phone then flash a a complete ROM including radio and OS and then you should be all fixed and if that dont work there is a WHOLE thread just for BRICKED phones so go read like you said you whrere doing.... To me its sounds like you dont have a clue what your doing since you have done this to 2 phones and if you did have a clue your first thing would have been to load SPLv7
so go enjoy your not really bricked bricks
and if i remember right your one of the fools that was making fun af elf because he charge people like you to fix phones over at hofo... so take your problem over there or call elf for some one on one and eat some ****....
Click to expand...
Click to collapse
I gotta give you a lot of credit for that post. Me and a few other members had a bet that it would take less than an hour before the first idiot would surface, Thanks LOL. Who the hell is elf, and I would like to see the post that I had made making fun of anybody. If your gonna try to put someone on blast, back it up. Its assholes like you that a community can do without. Your a true idiot man. No1 needs you around here with that type of attitude. I dont blame you though, I blame your parents for having you. Your mom should have flushed the toilet when she had you then we wouldnt have a piece of **** like you in this world, shame on her. They should be ashamed of themselves for they way you have turned out.
I was able to do all the PDA functions prior to gettting my phones stuck in bootloader. That is were I am now. I got myself stuck in bootloader while trying to load HardSPLv7. I had not done any type of mods or upgrades prior to doing this.
Elf, I want you and that moron to post topics if me bashing you, I cant imagine me doing that. I am 30+ years of age, 3 children and a beautiful wife. I dont have a lot of time, nor do I have the time or care to flame other on these forums. I know that I look to people here and other forums more than they will need me. So please back up that what you are saying and I make sure that I make it an effort to put in my sig that I am an idiot and that you are god. If this it was gets you thru the day, so be it. Just back them comments up. Its a bad tag to put on someone.
My phone reads on tri color screen
Herm100
IPL-1.01
HERM1
SPL-1.40. Olipro
I can do anything other than see this bootloader screen.
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
When I recieved the phone there was no radio version displayed nor was there a protocol version. I also noticed that there was no IMEI that was displyed under the device info. While I was attempting to load the HardSPLv7, that is when I got stuck.
Bro I need serious step by step instructions on this. I've taken all that had been posted about this stuff and a have a pile of info about it. Theres not a whole lot I can do in the boot mode si Im trying to make sure Im doing the steps properly. The info I have given is based on the 8525, I'll work on the TYTN after. Thanks
My appologies.. I just checked HoFo.. You were not one of the idiots on there, as far as I can tell..
Sorry.
Click to expand...
Click to collapse
Appology accepted. Im not worried about man. I got other things to worry about.
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
mrvanx said:
Again can you PLEASE answer the questions in my reply?? I need an answer to all FIVE of them, a simple task which will give us the correct status of your device, even if it seems stupid...do it. (the questions im referencing to)
Click to expand...
Click to collapse
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
FLiPinoy9oNe6 said:
1.SPL-1.40 Olipro
2.Dont know. Is there a way to check this now that I am in boot mode.
3.NO.
4.NO
5.Not sure. How can I find this out in the stage Im in
Click to expand...
Click to collapse
OK, right you need to flash ANY ROm that contains an OS only, DO NOT try flashing a ROM which has a radio or SPL etc...
Follow my WM5 Downgrade Guide, this will take you through the steps necessary, select the relevant ROMs by HTC and Cingular (found in the wiki).
If that works as desired then update to HArdSPL v7 for both devices then flash a new radio.
mrvanx said:
(directed at the OP)
Instead of wasting your time replying to posts which are off topic why dont you answer the question posed in my reply...then we can get your two Hermes devices back to working order. Otherwise a mod will inevitably lock this thread and you will be back to square one.??
Click to expand...
Click to collapse
wont lock the thread since the guy needs help... but instead i will play janitor and clean it up... since some people will never learn to play nice...
More to the point, have you managed to fix them using the procedure i described?
mrvanx said:
More to the point, have you managed to fix them using the procedure i described?
Click to expand...
Click to collapse
No sir, Ive got two computers working on this right now. One to look at replies and the other to do the update. I had to get a bite to eat so Im back at it. Im trying to connect to sync but not working. Im reading up again on this Sd card deal and mtty so Im trying.
Yes ofcourse i forgot, once you have rebuilt the nbh to make an OS only update (OS,Ext ROM and the 2 splashes) you cant update as normal because there is no activesync connection...the sd card technique is what you need to do. After the device can get into OS and connect over activesync you can do the rest (HardSPL and Radio).
ok mrvanx, after using device monitor I fianlly got a connection and tried downloading a rom. Process goes thru and at 12% it stops and gives me the 262 error message. I do wat it suggest when getting the message with sof reset and try again, still same error.
flash from a damn SDcard and be done with this **** man... your wasting time half assing around... flash an OS.nb from your card and then do all that was told to you from above... this is the only way you will get your hermes working again
mrvanx said:
OK by the sounds of it you are definatly NOT stuck in bootloader.
firstly can you please answer the following questions from the wiki:
Please post the answers back here when you are done.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=9664136#post9664136
Sir please help me
1 HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
2 - rite now dont show while OS is on
3 yes OS loads ok
4 (yes) No GSM shows while boot
m 05
s 04 No GSM
B 06 D 3.57
5 I can't find as comm manager button confused
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT !
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda(Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Alex- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex!))
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
Attached Images
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
__________________
HTC ADVANTAGE X7501 AT&T TILT 8925 VERIZON XV6700
THEQUARTZGUY said:
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT !
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
SORRY FOR LONG POST, JUST TRYING TO PROVIDE AS MUCH INFO AS POSSIBLE...
Click to expand...
Click to collapse
Hi
You could try Hard Reset BY Volume down+Stylus reset. if it turns on and load OS then you can use the unlocker again without Sim and Memory card(but your pc must have netframe work 2.0 installed and updated). If your device failed to load OS then you have to find the original rom for your device (which you can download from this website "use the search function") then unlock your device with olipro's latest unlocker.
Good luck
I got this once when I tried to flash from the memory card.
Remove both memory and sim card and battery for 10 mins.
make sure you are disconnected from the puter.
put battery in and hold the camerabutton all the way in and press the reset pin and hopefully you will enter the bootloader proper.
Which version of olipros unlocker did you use
Try to use the last version as it is less prone to trouble and works better on x7501
see this post as well(though not exactly your problem)
http://forum.xda-developers.com/showthread.php?t=374734
I would also recommend flashing from an xppro machine with the latest activesync
just reinforcing above post as well
I had a similar problem which I outlined here...
http://forum.xda-developers.com/showthread.php?t=368312
Notice the screenshots about a third of the way down.
Does your Advantage bootscreen look like this?
-Alex-
try inserting an SD card and boot to this strange bootloader screen
does it say Loading (then No image found)?
also, i assume you mean the PC does not see the device either?
what athena version have you all got? x7501? brand new? maybe HTC changed something about them...
Still No Luck!!! Any More Advice? It Would Be Appreciated...
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
if it can't load an image from SD and PC (with XP) can't see the device, then it needs to be sent back, if possible under warranty
bad choice
hay there first time some thing like that happen to me i was stuck for hours but then i got into boot loader in flashed the pk 3.0 and it worked so if u can see the olipro 1.20 thing then its all good and if u cant then mabee ur f***d that type of error u got its supose to cum near the end
THEQUARTZGUY said:
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM ME OR EMAIL ME AT [email protected] IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
Click to expand...
Click to collapse
Sorry that you are having the same problems that I did. Unfortunately, I can't bring you much comfort as I tried everything that I could find or was suggested. I searched every post and put out multiple cross-postings (that is a real sign of desperation for me!). Ultimately I had to get a new unit from Amazon as I could NOT get it back from the land of rainbow death that you see in the pics. I am no expert with the Athena/Advantage but I am also pretty experienced with computers and rarely ever get myself into a no-win like this. It takes alot for me to give up and declare a piece of equipment beyond my ability to fix, but this was one of those times.
I think that I traced the eventual cause to one (or a combination) of the following:
- Leaving the SIM and the Mini SD in the unit during the flash process
- Some glitch when using vista with the bootloader
- Using an older version of the OliPro unlocker (very likely the cause)
- Somehow panicing during the unlock and interupting the upgrade. You MUST do all three steps of the unlock to be safe.
I repeated the unlock with replacement unit being careful to use the latest bulletproof unlock and had no problems. But the original unit did have to go back.
I sincerely hope that you have better luck! Tell me how it turns out! If there is any other info you think you might be able to use from my experience, please ask away!
-Alex-
bairda said:
You MUST do all three steps of the unlock to be safe.
Click to expand...
Click to collapse
nope, the second and third steps are only for sim unlocking
But if you what to uprage a new Radio you have to do a SIM unlock?
cmonex said:
nope, the second and third steps are only for sim unlocking
Click to expand...
Click to collapse
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
marthynovak said:
But if you what to uprage a new Radio you have to do a SIM unlock?
Click to expand...
Click to collapse
nope, it's got nothing to do with the radio version
it's another area where simunlock info is stored
bairda said:
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
Click to expand...
Click to collapse
well it can't do much harm, of course less flashing means less risk, and step 2 and step 3 both flash a radio.
as a newbie i'd imagine it's easier to just do step 1 because step 2 can cause corruption to the OS so it needs to be reflashed and the black screen scares the newbies etc.
What I have noticed reading this board too is that sometimes the type of USB cables used matters. I do not know why, but this happened to me too. I failed at step #2 and couldn't figure it our why. To resolve this I changed everything. From computer to usb cables to fresh files, to restore old image and re-tried the process and it worked.
Also one thing I noticed is that the old unlocked is linked allot instead of the new unlocker which is almost bullet proof. Some folks did download the old unlocker and tried it on their x7501 and bricked their device....
Palonek's Business Management Systems and development http://www.edward-palonek.com/
Problem Resolved!!! Please Read, Very Important Information!!!
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
THEQUARTZGUY said:
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
Click to expand...
Click to collapse
Hi there,
Thanks indeed for the important info. I haven't yet tried the unlocker. But to my understanding the link " -BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831"
points to the latest version of the unlocker. The file I have downloaded is dated in November 2007. This is not correct? And what does the wrapper mean?
Could you please explain? I bought my X7501 in the US, but live in Europe and such a mistake could be totally fatal!
Thanks for your feedback.
Regarding The "bad" Unlocker....
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
THEQUARTZGUY said:
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
Click to expand...
Click to collapse
Thanks Ryan!
I see. I know that the X7501 is sold unlocked in the US and therefore only the 1st step of flashing the SPL would make sense. That means that if run the athena wrapper, all will be OK for flashing radio, ROM etc. I that correct?
Two more questions, if you don't mind.
1.Did you need to install .NET to run the Athena wrapper?, or is it kind of pre-installed mostly?
2.What is your experience with the cooked ROMs? Running stable? Can you flash back the original ROM if required?
Thanks
Dod.
I ran the 'wrapper' this week, step 1 only, so I could upgrade the radio driver. I first ran the bad unlocker and got the 'black screen of death', but after reflashing a good ROM, then the good 'wraapper', then the latest radio all is well.
Is there anyway that is 100% safe to upgrade or is there always some amount of risk that a unit will end up a brick ?
I've read so much here and on other forums my head spins lol. I was like all set to just do it and then I got the phone lol, now I'm getting cold feet because I read so many people have bricked their phone.
Also can the SPL be done by SD card or does it need to be done with a computer ? I know some will say do a search, I have and man there are so many choices is there just a page or link with a simple idiots guide ?
Its better to do all the upgrading through a PC. Its more safer than SD Card upgrade.
Simple way
Do the HardSPL first then do anything you want. Try to look for Mr.Vanx guides
I agree with beastfellow, install hardspl first then you can flash any hermes rom you like. I have flashed my heremes over 50 times,i even flashed it 12 times in a week as long as the roms you have have no radio or spl in them then they should be fine to flash. Just make sure they hermes roms you are flashing.
hardspl can be downloaded from here http://pof.eslack.org/hermes-unlocker/
guide to how to do it is located here
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
other guides and there links can be found here
http://forum.xda-developers.com/showthread.php?t=299462
anyway my advice is to go for it. I have only ever bricked one device and that was a wallaby back in the day.
good luck and make sure you read EVERYTHING ,twice if you have to
Dalork,
I felt exactly the same way as you a couple of years back. What I did was to read every scrap of info I could find, constantly assessing the risk, while looking for a stable rom.
Key criteria for my rom search was what other people were saying about that rom (good and bad) and the developers willingness to resolve issues. In the first instance this led me to Schaps and his brilliant roms. For my rom history see my signature.
Read the following threads very carefully, then read the threads on one rom from Schaps and, say, a rom from Kin0ken. Look at the 6.0 roms, NOT the 6.1 versions...
http://www.mrvanx.org/thg/
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes.
Also use these search tools:
wiki - http://www.google.com/advanced_search?q= +site:http://wiki.xda-developers.com&hl=en&lr=&as_qdr=all
forum - http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
entire xda site -
http://www.google.com/search?q=site:xda-developers.com
Once you are fully genned up then prepare your kit carefully, e.g. make sure your phone batttery is fully charged, then upgrade your rom as you logically and carefully work your way step by step through Mr Vanx guides.
First time I upgraded I had the Mr Vanxguide open on my desktop PC whilst I ran the rom upgrade off my laptop. Using the laptop meant that in the unlikely event of a power cut (does happen where I live) I wouldn't instantly end up with a bricked phone.
Good luck and PM me if you need help/any further info.
Cheers
WB
Thanks for the help folks, I'm just worried I'll brick it as I have a friend who tried this and his is a nice paper-weight now.
I must be getting confused as I thought doing the flashing direct frm the SD card was the safest ?
Anyways, I'm not certain at this point which is the best or safest ROM to go with. I was going to do the Hard-SPL-V7 (2.10 Olipro) and was think of the Schaps_WM6Pro_Hermes_4.31_WWE_Full.
ATM the unit has ROM 1.30.707.4 8/22/06 and Radio 1.20.31.10
I don't think it's ever been flashed as yet as the bootloader is IPL-1.01-SPL-1.06
ask your mate if i can have his paper weight i have a nice rock to swap for it
scousemartin, lol I had already asked him that before I bought my dopod as I was hoping to come here and find out if it could be fixed.
Another point, after upgrading the phone to say WM6 or whatever can you still recover/reload the original factory WM5 system/set-up ?
I guess I'm in-fact quite happy with how the phone is already I just really want to be able to use a 8GB Micro SDHC card so I can load more programs and music. I don't know if any of the radio ROM's will improve my signal as such but battery life seems to be ok already. Used the phone quite a bit today, started off with 80% battery and finished off tonight with still having 70%.
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
ultramag69 said:
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
Click to expand...
Click to collapse
Thanks heaps for that, and I agree I did think flashing from a SD card would be safer as there is no risk in USB/sync problems, no cable to bump...etc..etc... But then I'm a total newbie, what I think doesn't always make sense lol.
If I just do the Hard-SPL-V7 and then something like Schaps_WM6Pro_Hermes_4.31_WWE_Full and don't do the radio ROm is there really much chance of bricking the Dopod ?
While I say I'm not bothered with upgrading the OS and everything else, it's mostly because I'm **** scraed of bricking it lol. I guess it would be silly to say I wouldn't like the better features of a decent upgrade, I just have to get my head around it somehow. But I WILL need more space as I really like to put lots of music on it and some games/apps. Hence the SDHC, I'd like 4GB but would love 8GB as I doubt I'd ever run out of room then.
As it is with my current phone I have 3 x 1GB cards which I just swap around and I hate having to do that and I'm always losing/misplacing the damn things.
If you are SERIOUSLY thinking of upgrading, Hard SPL your phone. You can find the thread "Hard SPL or how not to brick your Hermes" in the upgrading section. Its best to do this as it is the safest we thing you can do. It won't prevent a brick but it makes it a lot more fixable. I have never bricked a phone that I couldn't fix (yet) with Hard SPL on it.
Its fairly difficult, I find bricking the hermes when using the sd card method, as long as you make sure you have Hard SPL, Unlock your Hermes(if needed, did this as wasn't sure) and make sure your battery is charged.
Unlock before putting Hard SPL on though as it downgrades the SPL to 1.10 olipro.
Also use Hard SPL ver.7 (should say SPL 2.10 olipro after upgrade) as ver 9 is the developers SPL (says SPL 2.60) and throws up error messages (if done from the pc) after flash.
As for the rom, no-one can say what is best... What is suitable for me may not be for you. If you ask this questiopn on a thread you'll be inundated with "This rom is best..." remarks. Search and you will see.
Hope this shines some light on the subject (forgive me if this seems scattered, too much caffeine and not enough sleep), anyway,
Cheers....
Thanks for the info and it does help/shed light on it. I have read heaps of info about most everything here, maybe more than I should have even to sart off with lol. I would normally not have been so concerned except that I have a friend close by who tried this exact way of flashing and still somehow bricked phone. Though he did say with folks help here he did get the unit working again but the radio never worked again I think he said.
I already downloaded a copy of Hard-SPL-V7 and Schaps_WM6Pro_Hermes_4.31_WWE_Full.
Not certain if this is the right one for me or not but seems alot of people like it and find it stable. I also grabbed this HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship though I'm not certain if it's any good or not. I haven't grabbed the unlocking file, not sure I need it or not. With flashing the Hard-SPL-V7 by sd card am I right in what I have read that all I need to do is rename the nbh. file and not the RUUWrapper_exe.
I am finding it difficult to get the Dopod to use 3G for web browsing/email though. But someone told me that the original set-up/ROM wasn't much good for the Optus/Virgin 3G network.
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
ultramag69 said:
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
Click to expand...
Click to collapse
You got me really confused now lol, I thought I only needed to run the Hard SPL and then whatever ROM I liked (was looking at ones without radio ROM's). Also do you think it would be wsie to flash it with a radio stack for Telstra when I'm using Virgin as it seems Virgin is using the Optus network.
Sorry if I sound daft just the more I read the more confused I'm getting. Also it seems that everyone does have a different opinion on how and what is best. Just want to work out what is best for me before I have a go at bricking my phone lol. I've not found setting up SMS/MMS hard at all. Seeed pretty easy, having most my trouble setting it up for Virgin's 3G access for web browsing. Just can't seem to get it to work, got it set-up for wifi at home no drama but don't really need web access from the phone when I'm at home and have several computers.
Sorry, Information overload...
1. CWW Enterprises Aus Operator Con.cab - this cab file does a quick loading of sms/mms setting on the phone. You can use ANY rom and then setup your messaging with this. First however, install 2.
2. ARCSoft MMSComposer cab - This allows the use of mms on your phone properly. Some roms don't seem to set up your mms properly. If you have this installed then run 1. it will fix it all up.
I believe it should fix up ALL settings (including the 3g ones) as when you flash a rom, no native settings are kept and I've never had trouble using 3g after installing 1. and 2. then running 1. (will be in programs). It will soft reset your phone after setting it up.
Confused...
Really, just find the rom you want, check in settings as some have an auto network wizard to set this up. I just like CWW Enterprises Aus Operator Con.cab as it was made by an Aussie to use here. Its good when you don't have the network setup wizard (lite roms generally don't come with the frills)
Hope this clears it up....(preferably like glass and not like mud)
Cheers...
I am intrested in buying a Hermes, most likely the unbranded HTC tytn that I believe comes all unlocked.
For that one the procedure is the same still, right?
Hard spl install and choose rome you like
I have seen eithe Schaps 6 or the newer 6.1 with diamond stuff in it
So would I have the same procedure. To find the hard spl (not sure which version to install) and then find the rom w/out a radio?
es_bih, yes. Its the same procedure. Instyall Hard SPL ver 7(ver 9 is the developer one. It tends to throw up an error after upgrading via pc, no problem though).
As for the rom, make sure its a hermes rom. Any you find on this forum are for the Hermes BUT if you go to the other forums (herald, kaiser, etc....) the roms will brick your device as it isn't compatible with your device. Cooked roms are good but until you get to know the vagaries of wm6.1 I'd suggest to stick with wm6. Its more stable than wm6.1. Play with that and then when you are confident enough to try, then go for wm6.1.
Most if not all cooked roms come without a radio rom.
Cheers...
Tried doing the Hard-SPL-V7 on Vista x64 computer and get error 260 problems.
Tried on a XP laptop and got a different option. The first screen that comes up after running the RUUWrapper.exe not only give me the choice of "Force SSPL" but also allows me to tick "Is this Hard SPL ? "
In the guides I've been reading it says you should only get the "Force SSPL". So my question is seeing as I have the option of ticking "Is this Hard SPL?" should I ?
Installing Hard SPL? Tick SSPL. After that you can pick either.
Hmmm, can't seem to get it to do it. Sounds so simple I must be missing something somewhere. No matter what I try I stillget the ERROR 260 (update error)
Hi guys,
Mods - first time post and im not a regular user so if im breaking the rules i apologise. I have spent hours already trawling the forums, but i am now admitting defeat and I need your help!
My Problem:
I have an x7501 SPL 1.06 0000, WM 5.0, GERMAN OS
I want to upgrade this to WM6.1 ENGLISH
I dont care what the SPL is, as long as it works, is reliable, and wont disable any standard WM functionality
I am not interested in tweaks, hulks, or other (non standard) tricks, i just want to get the device running a stock WM 6.1 rom
That said - if you guys think that going to 6.5 is the best (non beta, no risk) option, then im quite happy to go that route.
$50 reward to the first person who provides the following info IN A FORMAT THAT I CAN UNDERSTAND. im good with computers for a non pro (and can follow instructions , but this is just over my head!
I Need:
1) Link to an unlocker and instructions how to use, that will give me the required SPL (note my SPL is 1.06 - will this require two SPL flash steps??)
2) Link to a stable ROM that retains all windows functionality, and instructions how to use it.
If i find that i used two or more peoples help i will split the reward accordingly!
thanks in advance and keep up the good work!
Alan K
First you need to download the unlocker from this thread and follow instructions... http://forum.xda-developers.com/showthread.php?t=315831
This will give you SPL 1.2
Here is a handy thread with step by step instructions on upgrading your roms you should read through before beginning to flash...http://forum.xda-developers.com/showthread.php?t=429013
Unfortunately, the stock-like wm6.5 roms made by michy-prima that ran on spl1.2 are no longer hosted on any sites anymore. I can try to contact him for you and see if I can get a copy directly from him. I will see if I can do that.
Otherwise, you can change your spl to 3.5, which you might as well do anyways, as there are more roms for that spl and even the stock-like michy-prima roms were made in spl3.5 also, so if I can get those, I will get the spl 3.5 versions.
So to then change your spl to 3.5, you must have first used unlocker to make spl 1.2, then the only way that was made to change spl to 3.5 was to flash the Athena Project 4 rom, so go to this thread... http://forum.xda-developers.com/showthread.php?t=387409 and download the AP ROM V.4, unzip it, and run the flasher while your phone is connected with active-sync to your computer. This will install the spl3.5 and the AP4 Rom.
Now that that is done, you can choose any SPL3.5 ROM to flash... (make sure to only flash SPL3.5 Roms now... if need be, there is a way to go back to SPL1.2 if you need to, but there really is no reason you would need to.)
Probably the most modern rom with the most features would be the AGB Version 3.00 ROM, The Hulk one (I know you said you didn't want that, but it is the most current rom, and you can easily change the theme and wallpaper on it. This is the ROM I have on my Athena... its a nice ROM.) Here is the thread for that ROM... http://forum.xda-developers.com/showthread.php?t=614158
Just unzip the rom after you download it, and like before, hook phone up to computer and let it sync, then run the installer. You can also use the ealier AGB roms, too, if they look better to you, or any rom you come across as long as it is a spl3.5 rom.
And I will try to contact michy-prima to see if I can get one of his old clean wm6.5 roms or his stock wm6.1 roms, but I wouldn't count on me being able to get one from him. Personally I think the newer AGB ROMs are alot better and more recent and updated and would recommend using them.
Also, here is a convenient thread I just found that has links to many different builds and useful tools and guides... http://forum.xda-developers.com/showthread.php?t=397518 ... so if you want to try out a couple wm6.1 while you have spl1.2 or even after flashing spl3.5, as a lot of roms are made for both spls. Just make sure you only flash roms made for the spl that you have on your phone.
I hope this helps... if you have any more questions, feel free to pm me and I'll be glad to help. Happy flashing!
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
bigalk said:
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
Click to expand...
Click to collapse
Like I said, if you have any more questions or problems, feel free to ask here or pm me.
Sent from my HTC HD2 using XDA App
Also, if you prefer to have a winmo 6.1 ROM over the 6.5 ROM I suggested, there are links to many 6.1 ROMs in that last thread I linked. Here's the link again... http://forum.xda-developers.com/showthread.php?t=397518
MichyPrima's roms are no longer hosted, but I have heard good things about Taxists and Sogarths ROMs. You can easily try a rom and then flash another if you don't like it. Just remember, make sure to flash roms for the spl that you have. If you have SPL3.5 and want a spl1.2 rom, there are links to the tool to change back to spl1.2. The only way to go from spl 1.2 to spl 3.5 is to flash the Athena Project 4 ROM, then after that you can flash any spl3.5 you want. Let me know if you have any other questions or concerns.
Hi Zarathustrax,
just to let you know - i still havent managed to allocate time to this yet.
I havent forgotten about you, and im not pulling a fast one!
thanks again for your time and effort!
Al
Hi Zarathustrax,
In the very first step (unlocker link) Olipro says "follow the steps...."
I cant see the steps he mentions anywhere? This is one of the reasons for my original post
any ideas?
Al
Forget my last question - unlocker has the steps!
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
Hmmm... might be. I'll look into this and see if I can figure anything out.
Oh, by the way, sorry I missed your messages until now. I don't check these forums daily, so if you need to contact me quicker, send a private message to me.
bigalk said:
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Click to expand...
Click to collapse
I've been reading through the forums trying to find an answer... at what point does it show this error? Is it right away? Does the x7501 change screen at all or do anything? I think I remember having problems like this when I unlocked it years ago... but can't remember exactly what I did. Does the x7501 go to it's tricolored bootloader screen at all? It maybe is having problems installing usb drivers while it's in bootloader mode if it changes into bootloader mode when you get that error. Let me know asap so we can get this solved. Also, have you tried using another cable at all?
Putting phone in usb Mode
Try installing Enablerapi.cab before using the olipro unlocker.
Are you still on this
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
chappatti said:
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
Click to expand...
Click to collapse
I'm kinda thinking he gave up or something.... I've pm'ed him and have been trying to get more info on his problem for a couple weeks. I think he was having the problem on the first step... and the enablerapi will probably solve his problem.
But doing all this reading and trying to solve this problem has got me to pull out my old athena and start playing with it again... it's been a couple years since I've used it... I'm on the HD2 now, dualbooting WP7 and android.... but I've gotten an interest in getting my athena set-up and working again. The athena was way ahead of it's time.... if we could get devs interested in it again and get a good android build ported over, it would make an awesome tablet/phone. I think I'm gonna try to play around with getting android booting on it, but my knowledge of linux and low-level kernel work is limited to none. The best I can do is try to put together a build with what kernels/tools are already out and working on the athena, which isn't much. I think they had it booting and got touch screen working, but not much past that.
Hi zarathustrax,
no i havent given up . was checking in regularly to see if i had any response from you but never even looked at the pms. sorry.
i have a few hours to crack into this now so ive set up on a new machine (different av and firewall) and im going to have a go.
will report back - thanks for all the additional info my man!
al
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Well. I'm not an expert (my Ameo was unlocked as I bought it) but if I understand, the black screen is because the ROM on your device dont match the new SPL you have. Try to flash a new ROM (SPL 1.2, right?) should help.
bigalk said:
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Click to expand...
Click to collapse
Just replied to your pm before checking this thread, so I see that you can still get to SPL bootloader screen. So, what you should be able to do now is get your phone to bootloader screen and hook it up to pc like that. Then let any drivers that are installing finish, and where it says "serial" at the bottom should change to "USB".
At this point, you can now run a custom rom installer and flash a new rom. Since you want to change to SPL3.5, you should install the Athena Project 4 ROM.
Or if you want to leave it at this SPL for a while and test out a couple WM6.1 ROMS that use this SPL, just flash one of these. Here's a good thread that lists almost every ROM available with links and says what SPL they're for... http://forum.xda-developers.com/showthread.php?t=397518
I'll do a little more research also about the screen not coming on to make sure it's not some other problem, but it probably is just the current rom isn't compatible with the new SPL.
I'm sending this post to your pm too.
Also, make sure you have the SD card and sim card removed when doing flashing. And check what radio you have on your phone... you must have atleast radio 1.50 or higher to use Athena Project 4 or most WM6.1 or WM6.5 ROMS.