Related
Hiya I am interested in compiling my own version of the android project from the latest sources for Hero but I am having a little bit of trouble, I have been attempting to follow this guide android.modaco.com/index.php?showtopic=301857&view=findpost&p=1179830 but it does not seem to make a lot of sense to me. For instance there is no .repo/local_manifest.xml file only a .repo/manifest.xml file and editing this as outlined gives me an error. Could somebody point me in the direction of a fairly noob friendly guide for this kind of stuff, thanks a lot.
Conb123
P.S Sorry about the dodgy link, newbie restrictions prevented me from formatting it properly
this should be in Q&A Section not development really. But im looking for this too! installed ubuntu using Wubi set up JDK,SDK testsign etc and repo but god knows how to do it all! I only want to port cyanogenROM
follow this: http://source.android.com/download
when you got everything synced you can basically type "make" and watch it compile for a while. i managed to do it with just above zero knowledge about compiling.
if you want the cyanogen sources try it with the according repo. i have zero idea about vendor overlays, as i needed to compile only the recovery (watched two hours of eclair compiling, then was told i need cupcake sources and can compile the recovery only...)
Yes I am aware of how to get sources and how to compile them, I am fairly well versed in linux. But I do not know how I can compile it into a usable rom for hero.
the result of the compiling are image files that can be flashed to the phone: system.img etc. you can extract them using unyaffs.
I ran the make command, but i really have no idea what to do from there. What is the end result of doing the first make command? Im fairly sure that it is not a single .img file you can flash onto your phone. You need to make a kernal if i am correct(anyone know how to do this?)
the result of the compiling is at least a system.img. if you compiled it correctly you can flash that to /system partition. further you need a boot.img, which also contains the kernel. the the rom-cooking howto in dev section how to create one, or just get one from a working rom.
fwiw, the .img files are in out/target/product/generic/ (although there probably is a device specific directory in there if you handled the vendor overlay correctly. <- this is just a guess, i have actually no idea).
Wanna link us to that how to thread? I cant seem to find a complete one with working links.
http://forum.xda-developers.com/showthread.php?t=551711
Hello,
I want to compile Android from source. I want to just build a fully default Gingerbread that would run nice on my phone. I got the Android source, kernel source (kernel-2.6.32-U8800-Froyo) and now I don't know what to do next. I compiled the generic one already (lunch full-eng) and it ran fine on the emulator.
My most important question is, if I make it otapackage and flash it, would it start? If it doesn't, can I recover? What folders/files are essential if I make my own device for example in "device/huawei/u8800"
Also, where can I find a GOOD porting guide? I have found some that are old and not used anymore.
Some links
Start by going through source.android.com for the general basics if you havent already.
Also, even though Google removed the PDK (Platform Developer's Kit) from the site, it has been mirrored on kandroid here: http://www.kandroid.org/online-pdk/guide/index.html
The stuff in the the PDK, although inadequate, is still very important and explains how to create the necessary makefiles to add to the build, configuring for a new market, etc. etc.
Also,
watch these two videos over here. These were very helpful in my ROM development:
http://www.youtube.com/watch?v=1_H4AlQaNa0
http://www.youtube.com/watch?v=rFqELLB1Kk8
Learn to use github. It is helpful for you to keep track of your changes as well as incorporate others works into your own.
http://help.github.com/
Finally, Cyanogenmod repos are your BEST friend. Almost all major AOSP ROM devs owe some sort of thanks to those guys who have done so much. If you want to check out some of the code changes and patches that you want to incorporate look here on their gerrit:
review.cyanogenmod.com
If you want to look at the other changes that are actually in the cyanogenmod builds, best to look at their git repos here:
https://github.com/CyanogenMod
I am still learning right now while I create my ROM but your welcome to PM me if you have any questions
Glad someone helped. Now that ICS is available, I will build that instead. Now, I will follow the kandroid tutorial and add hardware_msm7x30 from cyanogenmod's repos. Then I'll make my own makefiles in the huawei/u8800 and I'll see if that works.
Also, some things I am not still clear. If I am not adding any recovery files, it shouldn't replace it, right? I want to make sure I can recover. However, my phone has a bootloader mode, which should still work, even if other's messed up. And the kernel, if I already have a compiled kernel for android 2.2, should it work for newer versions?
Thanks
Well AOSP as far as I know adds the stock recovery into the build so if you have a stock ROM, then you will lose your recovery (unless you change the source to skip the adding of recovery to otapackage).
Your bootloader should be fine. so you will theoretically be able to re-flash a custom recovery with fastboot as long as your bootloader is unlocked (assuming your phone is already rooted and has a custom rom, then it should be unlocked)
If you are using CM7 as base, then you dont have to worry about it as it is configured to NOT replace the recovery during the building and creating the otapackage.
The kernel should not be compatible as there were significant changes from Froyo and you should not use it. By the way, for now, work on the ROM first. Creating a custom kernel from scratch is hard work and should be left as the last task to do (assuming you know linux kernel development). Just use the stock pre-built kernel that comes with the source.
Also, according to Google:
Starting with IceCreamSandwich, the Android Open-Source Project can't be used from pure source code only, and requires additional hardware-related proprietary libraries to run, specifically for hardware graphics acceleration.
Click to expand...
Click to collapse
This means you need to find the correct hardware drivers first. Where to find that is beyond me. Check CM repos. It would be easy if everyone had a Nexus S/ Galaxy Nexus as the drivers are immediately available on source.android.com. Ah...well....
Personally, I am going to wait a few weeks before dabbling into ICS ROMs. Wait till CM7 comes out with a nightly for my nexus one and then rip the drivers from their ROM and use it for mine
I got ICS source and made the necessary Android.mk, AndroidProducts.mk, BoardConfig.mk and u8800(my device).mk, also vendorsetup.sh . Now, when I am trying to build it doesn't give me an error, more of a suggestion. It says to include "LOCAL_MODULE_TAGS := optional" in the hardware/msm7k/liblights/Android.mk. I added that, and tried again. Got that message again, but with other type /libril/Android.mk
About fastboot, I am not sure if my device has that. It can be turned on with volume up and down + power, but it boots to so called "pink screen". When I mount phone using usb to my pc, I can browse the recovery.img and other related stuff. If I have the otapackage, can I just take the recovery out from there or what should I modify in source? Add something to the makefiles?
Yeah I am pretty sure you should add the LOCAL_MODULE_TAGS to all of the relevant pre-built files. maybe they made the compiler less harsh in ICS when compared to the one for gingerbread. In gingerbread, it outright crashed the compile and asked you to add the tags.
According to Google engineers, here is the reason why they use these tags:
Short answer: lack of time.
The urgent concern was to prevent new modules from using a user tag
(implicitly or explicitly), and we took care of that. We haven't had
time to deal with the existing modules, there are over 1000 of those.
JBQ
Click to expand...
Click to collapse
By the way, I hope you have git setup and the changes you have made are being staged and commited to your repo in github. If you ever make a mistake that hardcore crashes your compile and you dont know what you did, git will be there for you to rollback the changes as well as keep track of everything you have done from commit to commit
As far as I know, CM repos dont have everything complete for a full build of ICS but I could be wrong.
So you are working with AOSP correct?
As for the fastboot every android phone should have a fastboot by default but I believe each phone has a slightly different version. I will post how my fastboot looks like in a bit.
As for the removal of recovery, there should be somewhere in either source, makefiles or argument for the otapackage command that should leave out the recovery when making update.zip. You could just remove the recovery from the update.zip, change the updater-script and repackage it but its not a clean solution and those changes should be done in a uniform manner so you dont repeat this step every time you do a new build.
Where exactly is it, I have yet to know. Still learning much of this myself.
I now completely understand what modes of turning on my phone has... First one is normal, second is recovery, third is update-bootloader(I can access all files with it too) and four being the fastboot. The custom recovery I have on has an issue that it wants to boot to charging mode when I type "adb reboot bootloader". I can get to fastboot with the custom ROM I have on right now though. I think I am safe if I have issues.
I edited msm7k Android.mk to remove libaudio and libgralloc (errors with those), and it compiles to the step where it says it has no rule to make kernel requied by boot.img. I have put into BoardConfig.mk the line TARGET_PREBUILT_KERNEL with my kernel. I don't understand, what's wrong now...
My goal is to simply get it booting up. I'll look into libraries and other later.
-e-
Got the kernel thing sorted out. Copied device.mk from tuna device and edited to fit my device. Also modified full_u8800.mk and made the call to inherit from device.mk. Compiling now and I think I got past that.
-e2-
Got it built successfully. Fastboot won't let it install, because it has no mount points. Added mount points and let's see...
Nice to see you are making progress.
Got it built, but the fastboot is kinda buggy in my device, maybe custom rom issue. I can't make otapackage, it says "no rule to make target otapackage". I have a possible fix, trying that later.
Otherwise, I read its possible to flash system.img from recovery via advanced restore, update.zip package or advanced flash_image, but I don't know. Will post results.
Sent from my u8800
-e-
Tried make otapackage again. It still says "make: *** No rule to make target `otapackage'. Stop.". Maybe some things are still missing, I don't know. adb flash_image command will always post -1 to me, update.zip didn't work, advanced restore is not for this. I have a compiled image and I can't wait to test it, but I can't flash it...
If nothing works I'll revert to stock ROM and try again.
Blefish said:
Got it built, but the fastboot is kinda buggy in my device, maybe custom rom issue. I can't make otapackage, it says "no rule to make target otapackage". I have a possible fix, trying that later.
Otherwise, I read its possible to flash system.img from recovery via advanced restore, update.zip package or advanced flash_image, but I don't know. Will post results.
Sent from my u8800
-e-
Tried make otapackage again. It still says "make: *** No rule to make target `otapackage'. Stop.". Maybe some things are still missing, I don't know. adb flash_image command will always post -1 to me, update.zip didn't work, advanced restore is not for this. I have a compiled image and I can't wait to test it, but I can't flash it...
If nothing works I'll revert to stock ROM and try again.
Click to expand...
Click to collapse
If you successfully compiled, take the boot.img and system.img and package them into a zip and use dsixda's kitchen to make it flashable
Blefish, is it possible for you to share your device/vendor structures somewhere? I just finished setting up a build machine for ICS (using Cyanogenmod's repos in my case), and made a working full-eng image that seems to boot just fine in the emulator, so I'm seemingly all ready to hack around our device's specifics. But I would rather not do duplicate work, so I decided to ask
I'm also grabbing Huawei's new 2.6.35-based package to get the new kernel config, can't wait for them to release the actual sources for the update.
I'll share them on GitHib once I get a working build. I haven't got much time, and I changed to CM9 alpha now (repo branch ics). Since we got a 2.3 update, my first task is to port the latest clockworkmod recovery and then the ICS.
Compiling Android is long task and I'll do it in weekends, but the recovery should be available sometime, it shouldn't be hard to port that.
Oh yeah, look up stockwell's, dzo's and genokolar's github, they have done the device configuration. You can get much help from there. This weekend I'll propably test the build, I got otapackage command working now (it needed some things I can't write on mobile).
Sent from my U8800 using Tapatalk
Does it exist anywhere? What I mean is explaining what every directory and most files are for, where to find certain things, etc.
If not, would anyone be interested in helping create it and host it somewhere?
Also, the site should host a FAQ, like:
What happens to files I modified if I run repo sync again?
What, if anything, should I delete in out/ before running make again?
My build doesn't boot! Why not?
Some things like that.
This is just kind of a rambling of thoughts and issues I've had since I just did my first build this past weekend.
advancements
Just wondering if there were any advancements about this since last year?
Thanks.
jab416171 said:
Does it exist anywhere? What I mean is explaining what every directory and most files are for, where to find certain things, etc.
If not, would anyone be interested in helping create it and host it somewhere?
Also, the site should host a FAQ, like:
What happens to files I modified if I run repo sync again?
What, if anything, should I delete in out/ before running make again?
My build doesn't boot! Why not?
Some things like that.
This is just kind of a rambling of thoughts and issues I've had since I just did my first build this past weekend.
Click to expand...
Click to collapse
Hello,
I'm willing to try and build a custom rom, but I've been diving through the site for a few days and I still don't get it. I believe I do have the required background to do this: programming, linux, etc. and I have wide experience as a phone user, etc. It's just that either I'm not reading what I need or the way I want it. The problem, I believe, is that all I find are guides telling me to install this and those tools and then open this and that and voila! you got your rom. But they're not explaining WHAT exactly goes into those roms, or what is expected to go there, what's the purpose of those contents, etc., and I can't really catch with that. I feel at a loss and hate wasting my time turning around for nothing.
1. I don't understand the difference between a flashable rom and one that is meant to be installed through recovery, although I can see they're different. Do they both models contain the same kind of data? Is there any restriction to what one model can contain over the other one? If so, how would I convert from one to the other? But please, don't tell me to use this or that tool. I just need the theory behind it. Something of sorts like: "You need to extract this or that from this tarball, then mount this image, then the directory tree there goes in that directory over the other model of rom"
2. update-binary: Okay I guess this is run when installing from recovery, and this takes care of installing the rom, right?wrong?. Is this a per-rom thing, per-device thing? generic? If it's per-rom, how to generate it? do I need to compile something? Is there any generic source code that can be used as a start?
3. Although I have a basic understanding of how the Linux directory tree works, I know Android works on top of a heavily modified Linux. So can you explain briefly how the directory tree works? For instance, I believe /data/data is where Android apps install to, in /system/bin or xbin I can find busybox binaries/symlinks if present. /dev and /proc look the same as in Linux. I don't know about /sys. Also how are both rom models deployed to this tree? What is basically being copied?
4. If I were to compile a kernel, where do I find the Android kernel sources? or is it just a generic Linux kernel? where can i get a basic config for the device? Last time I checked my device hadn't /proc/config.gz but maybe I could get it from another rom with it enabled or something. What toolchain and where to get it? Oh and if you know of a native arm version of gcc or whatsnot, I'd prefer that. Setting up IDEs or toolchains is a nightmare. I don't like crosscompiling. But crosscompiling or not, a directory with all needed binaries without needing to set up system variables nor other stuff, would be amazing.
I surely have a lot more questions that I can't get from the back of my mind now, and I'll have yet more as you explain. But the point of my questions was mainly trying to explain the degree of the loss I'm at, so you can assist me better.
If it looks like a foolish petition, well, that's because I'm quite stubborn and can't catch things that don't go my way. I really need to understand the basics before I can move into actually doing something. I want to build a rom for the right reasons(to me). It's not just about packing a set of apps or themes with it, but about learning and doing other stuff like trying to fix things that are not supposed to work for the device in that Android version, etc.
If you can't help, congrats for reading through here anyways But any help is greatly appreciated :good:
oxiroxt said:
Hello,
I'm willing to try and build a custom rom, but I've been diving through the site for a few days and I still don't get it. I believe I do have the required background to do this: programming, linux, etc. and I have wide experience as a phone user, etc. It's just that either I'm not reading what I need or the way I want it. The problem, I believe, is that all I find are guides telling me to install this and those tools and then open this and that and voila! you got your rom. But they're not explaining WHAT exactly goes into those roms, or what is expected to go there, what's the purpose of those contents, etc., and I can't really catch with that. I feel at a loss and hate wasting my time turning around for nothing.
1. I don't understand the difference between a flashable rom and one that is meant to be installed through recovery, although I can see they're different. Do they both models contain the same kind of data? Is there any restriction to what one model can contain over the other one? If so, how would I convert from one to the other? But please, don't tell me to use this or that tool. I just need the theory behind it. Something of sorts like: "You need to extract this or that from this tarball, then mount this image, then the directory tree there goes in that directory over the other model of rom"
2. update-binary: Okay I guess this is run when installing from recovery, and this takes care of installing the rom, right?wrong?. Is this a per-rom thing, per-device thing? generic? If it's per-rom, how to generate it? do I need to compile something? Is there any generic source code that can be used as a start?
3. Although I have a basic understanding of how the Linux directory tree works, I know Android works on top of a heavily modified Linux. So can you explain briefly how the directory tree works? For instance, I believe /data/data is where Android apps install to, in /system/bin or xbin I can find busybox binaries/symlinks if present. /dev and /proc look the same as in Linux. I don't know about /sys. Also how are both rom models deployed to this tree? What is basically being copied?
4. If I were to compile a kernel, where do I find the Android kernel sources? or is it just a generic Linux kernel? where can i get a basic config for the device? Last time I checked my device hadn't /proc/config.gz but maybe I could get it from another rom with it enabled or something. What toolchain and where to get it? Oh and if you know of a native arm version of gcc or whatsnot, I'd prefer that. Setting up IDEs or toolchains is a nightmare. I don't like crosscompiling. But crosscompiling or not, a directory with all needed binaries without needing to set up system variables nor other stuff, would be amazing.
I surely have a lot more questions that I can't get from the back of my mind now, and I'll have yet more as you explain. But the point of my questions was mainly trying to explain the degree of the loss I'm at, so you can assist me better.
If it looks like a foolish petition, well, that's because I'm quite stubborn and can't catch things that don't go my way. I really need to understand the basics before I can move into actually doing something. I want to build a rom for the right reasons(to me). It's not just about packing a set of apps or themes with it, but about learning and doing other stuff like trying to fix things that are not supposed to work for the device in that Android version, etc.
If you can't help, congrats for reading through here anyways But any help is greatly appreciated :good:
Click to expand...
Click to collapse
I am not terribly knowledgeable about all of this, but I will take a crack at it. Others can feel free to correct me.
1. "Flashing" is usually done through the recovery from a zip with an update script inside. That script is in a language called "edify". Read more about Edify Here and Here.
The only other common way that I know of installing a ROM is through fastboot in the bootloader, but that is normally only used with official factory images. Also, I think Samsung ROMs are often flashed with a proprietary program called Odin.
2. I think that the update-binary is standard across all recent devices. I think it is just an interpreter for the Edify scripting language. Old versions of android used a somewhat different scripting language and required a different file. You can probably pull the binary out of another recent zip and use that. The main thing you have to worry about is the update script (instructions for what the zip does) and the folder structure of the zip.
3. I am not confident to explain much here, but the apps and their data are stored in different places. User apps are stored in /data/app with app data stored in /data/data, I think. System apps are installed in /system/app. There is more files stored on the "sdcard" partition which can be internal or external, depending on the device.
4. Kernel sources are usually provided in the source code from whatever repo you are using. Different ROMs use different bases. Here is some info about grabbing the AOSP kernel sources with git: http://source.android.com/source/building-kernels.html
Many of the more popular ROMS have specific build instructions on their individual github pages (Cyanogen, Paranoid Android, etc), so you might what to look at those, too. Also, depending on the individual devices, there might be proprietary binaries sourced from the device or hardware manufacturers for things like camera drivers, graphics chips, etc.
If you want a walk through of the basic build process google has a tutorial. The last time I checked there seemed to be some outdated info, but it might give you a general idea of the build process. http://source.android.com/source/initializing.html
Hopefully someone more knowledgeable can give you more info, but that is all I got
synesthete said:
I am not terribly knowledgeable about all of this, but I will take a crack at it. Others can feel free to correct me.
1. "Flashing" is usually done through the recovery from a zip with an update script inside. That script is in a language called "edify". Read more about Edify Here and Here.
The only other common way that I know of installing a ROM is through fastboot in the bootloader, but that is normally only used with official factory images. Also, I think Samsung ROMs are often flashed with a proprietary program called Odin.
2. I think that the update-binary is standard across all recent devices. I think it is just an interpreter for the Edify scripting language. Old versions of android used a somewhat different scripting language and required a different file. You can probably pull the binary out of another recent zip and use that. The main thing you have to worry about is the update script (instructions for what the zip does) and the folder structure of the zip.
3. I am not confident to explain much here, but the apps and their data are stored in different places. User apps are stored in /data/app with app data stored in /data/data, I think. System apps are installed in /system/app. There is more files stored on the "sdcard" partition which can be internal or external, depending on the device.
4. Kernel sources are usually provided in the source code from whatever repo you are using. Different ROMs use different bases. Here is some info about grabbing the AOSP kernel sources with git: http://source.android.com/source/building-kernels.html
Many of the more popular ROMS have specific build instructions on their individual github pages (Cyanogen, Paranoid Android, etc), so you might what to look at those, too. Also, depending on the individual devices, there might be proprietary binaries sourced from the device or hardware manufacturers for things like camera drivers, graphics chips, etc.
If you want a walk through of the basic build process google has a tutorial. The last time I checked there seemed to be some outdated info, but it might give you a general idea of the build process. http://source.android.com/source/initializing.html
Hopefully someone more knowledgeable can give you more info, but that is all I got
Click to expand...
Click to collapse
OMG Finally some light! THANK YOU, THANK YOU, THANK YOU for all the info. I didn't get much right now, I'll need to read through your post a few times before I get it all, haha. I'll be sure to check the links too. Thank you!
Hi everyone,
as title suggests, I'd like to "port" clean AOSP to be able to install and run it on the custom device.
Basically, the situation is following: I got a custom device, based on rockchip rk3288 SoC. The device currently runs Android 5.1 successfully. I'd like to update Android to version 6 (got AOSP sources and AWS builder image up and running), but the company that created Android v5 for us no longer exists.
Thus I am here to ask for advice(s) on how to proceed (or whether it even is a good idea to do that myself, given the fact that I have zero experience with Android ROMs development), possibly a step-by-step guide on what to do.
The question is, do I just find drivers for hardware components present in the device (usb hub, ethernet, etc.) and just somehow "link" those to existing sources (of AOSP) and just run the build with different parameters? Or do I need to build a whole new kernel for the given device-OS combination?
Thank you for any advice or opinion!
Well this is an interesting one. There are several routes you can take here.
If you have the kernel source code, and the source code for the drivers, you could probably build the kernel from source and use it to boot Android, however, as that's unlikely, you're looking at a more regular porting process, which usually consists of pulling the vendor blobs from the existing Android system, building AOSP/Lineage with those blobs involved, and hacking together a new ramdisk that HOPEFULLY will be compatible. It's a very long and very tedious process, but it's certainly possible.
From that you'll then get in to the debugging stage of finding out what works out of the box, you'll very well need to make changes to AOSP for it to work on that SoC.
abtekk said:
Well this is an interesting one. There are several routes you can take here.
If you have the kernel source code, and the source code for the drivers, you could probably build the kernel from source and use it to boot Android, however, as that's unlikely, you're looking at a more regular porting process, which usually consists of pulling the vendor blobs from the existing Android system, building AOSP/Lineage with those blobs involved, and hacking together a new ramdisk that HOPEFULLY will be compatible. It's a very long and very tedious process, but it's certainly possible.
From that you'll then get in to the debugging stage of finding out what works out of the box, you'll very well need to make changes to AOSP for it to work on that SoC.
Click to expand...
Click to collapse
Thanks for pointing in the right (or at least some) direction! I found some guide on porting ROMs which I followed, basically like you said. So I just replaced some files in System image. Will flash later today, so maybe I will get some results!
abtekk said:
From that you'll then get in to the debugging stage of finding out what works out of the box, you'll very well need to make changes to AOSP for it to work on that SoC.
Click to expand...
Click to collapse
So I was following this tutorial, although found some irregularities, let's say: For example, none of those 2 folders contained init.d/ directory, thus I didn't update it. Also, I haven't found META-INF folder therefore haven't updated updater-script.
Basically, when I did (or at least what I think I was doing was that I took /system partition from our current ROM, that is working on that custom device and replaced stuff in there by stuff from the new system I wanted to port. My idea from what I've read was that i took kernel (and boot/recovery) from the original, working ROM and "injected" the new system onto it. Is that correct? Is that what I needed to do? Because the problem is, I cannot boot into the system (might as well be because of Kernel version, because I am trying to port Android 6 on Kernel 3.10. which was used in the current ROM running Android 5). It looks like the device is stuck in bootloader, or "somehow doesn't know what to start" (sorry, I can't put it better), displaying only my device's logo.
When I connect it to the computer via USB cable, running adb devices shows me that device, but when I try to access shell using adb shell I got error saying that /system/bin/sh wasn't found, which made me thinking that somehow the /system partition isn't "linked" properly, like I stated in the beginning.
Was I doing everything correctly? Do I need to do something above that? (maybe do you know about some tutorial). I am trying to port AOSP 6 Android.
Thank you!