...at 11:31am since last week. Any ideas, searched the forum and cannot see anything similar.
Nothing changed apart from installing a registry editor (Mobireg) and doing the following...
39. Speed Up Web Page Loading Considerably
The following registry tweak will enable almost instantaneous web page loading in the web browser. It apparently enables wireless N mode but seems to work with cellular data too. Go to:
HKLM/Comm/BCMSDDHD1/Parms
11nModeDisable = Change from 1 to 0
manila : 2.5.19211619.0
Rom : 1.66.405.2 (76641) WWE
Radio : 2.06.51.07
thanks in advance for any assistance.
Related
Not sure, but might be the Cache things
cause last night I try to set my Win2k3SE CHS to other value
it only show me 4 Profile on Today Screen
then I set it back to Original value back to 7 Profile , not sure why
so here is the different between 220 & 206
CHS 220 (value data = 61440)
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:0000F000
ENG 206 (value data = 8192)
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00002000
Today will test on my Eng 2.06 see will it improve or not
hahahhah tested this way
no improve,
now try to copy 1.72wwe profile.dll over to 2.06 and see will that make any diff
---------------------
tested , cant copy over.... :shock:
I upgraded(only ROM upgrade) to Schap's 4.31 WWE (Full edition) ROM and the performance of WM6 was pathetic without installing any extra applications. I thought thats becuase the ROM is fully loaded with all nice applications. Because i didnt need many of such applications i flashed Schap's 4.31 WWE (Lite Edition) ROM. On the LITE ROM i have installed ONLY the following applications:
1. JBED JAVA(Storage Card) : GMail and Opera Mini
2. HTC Diamond Keyboard(Device)
Still the performance is pathetic.
1. It takes a while to open up Messaging. 2. If Contacts are open, i can see the system crying and slowly comes up.
2. When someone calls it takes a while to show up on the screen though i start hearing the ringtone much earlier.
3. I press the call button and it takes atleast 3-4 seconds to respond, sometimes even more.
Memory Statistics(immediately after soft reset) as below:
Storage: Total = 63.48MB, In Use = 15.12, Free = 43.85
Program: Total = 50.77MB, In Use = 20.89, Free = 29.88
Physical Memory: Total = 50.77MB, In Use = 22.62, Free = 28.15
Virtual Memory: Total = 32MB, In Use = 5.81, Free = 26.19
Experts please advise. Are there any tweaks or is this with everybody after upgrading to WM6 and i should start living with it.
Install .net 3.5.
Not sure what version of .net you have (if any) but try this
1. Install NetCF3.5 on main memory
2. Open registry editor
3. Go to HKLM\Software\Microsoft\.NETCompactFramework
4. Change the DWORD value of 2.0.7045.00 from 1 to 0
5. Change the DWORD value of 3.5.7283.00 from 0 to 1.
6. Reboot
It's a tweak for The PDAViet os 20226 3G.
Makes it REALLY quick.
If wm6 doesn't do anything for you, try 6.1, Its heaps faster...
Cheers...
I have no performance issues using wm6.1. Flash it or do some tweaks here (note the cache info)...
http://wiki.xda-developers.com/index.php?pagename=Performance tweaks
regards
Here is what i did.
Flashed CRC v11.1 ROM WM6.1. Modified 6MB PP to 8MB PP.
I have installed quite a few softwares now all on Device:
1. JBED (GMail)
2. HTC Keyboard
3. Registry Editor
4. HTC Home
The device is stil very responsive.
sahuja said:
Here is what i did.
Flashed CRC v11.1 ROM WM6.1.
The device is stil very responsive.
Click to expand...
Click to collapse
you might want to go to 11.2 the 11.1 has corrupted coredll.dll file, surprised it works at all lol...
Hello Everyone!
Firstly I would like to say thank you for the amazing input you put into this site - I have gone *very* far on the path to learning about my PPC 6800 just from reading past posts.
Problem
When trying to use data services on a Sprint Mogul configured for Alltel - Dialing #777 results in a "Cannot connect for unknown reason" message.
Voice and Text works fine.
Current Setup
PPC 6800 - SPC Reset to 000000 via QPST
oliPro 2.4
Radio 3 42 50
DCD 3 2 6
Alltel Carrier Cab 20080824 (I simply double clicked to install this right?)
PRL: 30031 and 40036 tried
ALWAYS ROAMING (I'm never in an Alltel Area)
Windows Connections settings: Alltel Wireless - #777 - login: [email protected] pass: alltel domain: empty
My Flash Steps
1) hard reset
2) Installed olipro 2.4 (and even tried with no2chem 2 47) via RUU
3) Flashed alltel Stock 3.35.671.9 with Radio via RUU
4) Let customizations run
Data at this point does not work but has (last week!!)
5) install radio 3 42 50 via flash
6) install dcd 3 2 6 via ruu
7) let customizations run
8) double clicked on Alltel carrier 20080824 and installed to device
data says same problem
I've tried a *228 Option 2 (update roam) and Option 3 (activate). No help.
I'm stuck
EPST Settings
Security:
HDR AN: [email protected]
HDR AN pass: my hex esn in all caps
PPP user id: [email protected]
PPP pass: alltel
MIP Default:
nai: [email protected]
mn ha: 101
mn aaa: 3E8
reverse tunnel: enable
home address: 0.0.0.0
primary address: 0.0.0.0
secondary address: 0.0.0.0
ha shared: rzU4LCHIJp+Efdtf (it worked last week!?)
aaa shared: alltel
dmu public key: 0
mn authentication: 0
MIP
mip mode: mobile ip preferred
mobile node ha: disable
send reg retry: disable
dormant handoff: ena
QPST Settings
By putting my phone in DIAG mode and running QPST I have the following settings
DATA
MDR Mode: SVC opt 33 Prefd
Service option: Pre 707
Data qnc - unchecked
data scrm - enabled
Mobile IP
Behavior : simple only
mn auth calculation: unchecked
My Questions
1) am I flashing this correctly?
2) Could someone please verify what my DATA and M.IP settings should be in my QPST section?
3) does my HA shared key in EPST have anything to do with this?
Thanks for any guidance or help in getting me setup - I'm hoping that by making stating all my settings nice and clear we can help others that search in solving their problems as well!
ShaneOMak said:
Hello Everyone!
Firstly I would like to say thank you for the amazing input you put into this site - I have gone *very* far on the path to learning about my PPC 6800 just from reading past posts.
Problem
When trying to use data services on a Sprint Mogul configured for Alltel - Dialing #777 results in a "Cannot connect for unknown reason" message.
Voice and Text works fine.
Current Setup
PPC 6800 - SPC Reset to 000000 via QPST
oliPro 2.4
Radio 3 42 50
DCD 3 2 6
Alltel Carrier Cab 20080824 (I simply double clicked to install this right?)
PRL: 30031 and 40036 tried
ALWAYS ROAMING (I'm never in an Alltel Area)
Windows Connections settings: Alltel Wireless - #777 - login: [email protected] pass: alltel domain: empty
My Flash Steps
1) hard reset
2) Installed olipro 2.4 (and even tried with no2chem 2 47) via RUU
3) Flashed alltel Stock 3.35.671.9 with Radio via RUU
4) Let customizations run
Data at this point does not work but has (last week!!)
5) install radio 3 42 50 via flash
6) install dcd 3 2 6 via ruu
7) let customizations run
8) double clicked on Alltel carrier 20080824 and installed to device
data says same problem
I've tried a *228 Option 2 (update roam) and Option 3 (activate). No help.
I'm stuck
EPST Settings
Security:
HDR AN: [email protected]
HDR AN pass: my hex esn in all caps
PPP user id: [email protected]
PPP pass: alltel
MIP Default:
nai: [email protected]
mn ha: 101
mn aaa: 3E8
reverse tunnel: enable
home address: 0.0.0.0
primary address: 0.0.0.0
secondary address: 0.0.0.0
ha shared: rzU4LCHIJp+Efdtf (it worked last week!?)
aaa shared: alltel
dmu public key: 0
mn authentication: 0
MIP
mip mode: mobile ip preferred
mobile node ha: disable
send reg retry: disable
dormant handoff: ena
QPST Settings
By putting my phone in DIAG mode and running QPST I have the following settings
DATA
MDR Mode: SVC opt 33 Prefd
Service option: Pre 707
Data qnc - unchecked
data scrm - enabled
Mobile IP
Behavior : simple only
mn auth calculation: unchecked
My Questions
1) am I flashing this correctly?
2) Could someone please verify what my DATA and M.IP settings should be in my QPST section?
3) does my HA shared key in EPST have anything to do with this?
Thanks for any guidance or help in getting me setup - I'm hoping that by making stating all my settings nice and clear we can help others that search in solving their problems as well!
Click to expand...
Click to collapse
DMU Key Reset. Either activate an old phone... wait a bit... get it working... then re-activate the new one. Or... call them.... tell them your phone doesn't get data, and you just did a hard reset. They might be able to fix it for you while you are on the phone.
Case Closed!
I called alltel and asked them to look at at performing a DMU Reset - while looking at my account they realized a few glitches (why they did not catch it before I'm not sure) and made changes.
They included:
Updating my Service Class to Simple IP only
Double Checking my AAA Authentication log and realized that a billing issue was not connected (Damn, they should have left this alone )
Thanks for your help!!1
*case closed* !
Hi, I am currently trying to compile a list of carrier specific aGPS servers to make a profiling tool that will allow people with custom ROMs to access the correct aGPS servers. The information that I need is contained in your registry (I would suggest using total commander attached to this post if you dont already have a registry editor)
Please can you let me know the information contained in the Following key:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"ServerIP"=
"ServerURL"=
"GPSMode"=
"ServerPort"=
"DynamicURL"=
"TLSHostName"=
Please reply using the above format and maybe I can add this to my profiling app
Excellent!
With the recent AT&T changes, we're going to need this.
Cheers,
Hi there here is mine
Rom:Vodafone UK 5.10.161.1 WWE
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"ServerIP"=10.1.101.63
"ServerURL"=missing
"GPSMode"=0x2 (2)
"ServerPort"=0x1C6B (7275)
"DynamicURL"=missing
"TLSHostName"=missing
So by the looks of it uses an Internal IP address specific to Vodafone UK.
HTH
b0yce
b0yce said:
Hi there here is mine
Rom:Vodafone UK 5.10.161.1 WWE
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"ServerIP"=10.1.101.63
"ServerURL"=missing
"GPSMode"=0x2 (2)
"ServerPort"=0x1C6B (7275)
"DynamicURL"=missing
"TLSHostName"=missing
So by the looks of it uses an Internal IP address specific to Vodafone UK.
HTH
b0yce
Click to expand...
Click to collapse
Actually, I think that's the generic IP address HTC ships with all their ROMs. See below, which I got from the OEMDrivers RGU of the new AT&T ROM (the AT&T aGPS server updates are done via PROVXML):
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000000 ; 0:Disable AGPS
[B]"GPSMode"=dword:00000002 ; 1:GPS_FIX_MODE_MSA, 2:GPS_FIX_MODE_MSB, 3:GPS_FIX_MODE_MSS[/B]
"NumberFixes"=dword:3B9AC9FF ; 999999999
"TimeBetweenFixes"=dword:00000001 ; 1
"QoSAccuracy"=dword:00000032 ; 50
"QosPerformance"=dword:00000059 ; 89
[B]"ServerIP"="10.1.101.63" ; Set CHT AGPS Server IP as default[/B]
[B]"ServerPort"=dword:00001C6B ; Set CHT AGPS Server Port as default[/B]
It appears that aGPS is in fact disabled by HTC, by default, as not all Carriers support it (Vodafone UK might be one of them that don't).
Yeah, just found that in the T-Mobile ROM i have dumped as well Though there does seem to be a mention of supl.agps.emome.net in the gpsdriver.dll....
B4PJS said:
Yeah, just found that in the T-Mobile ROM i have dumped as well Though there does seem to be a mention of supl.agps.emome.net in the gpsdriver.dll....
Click to expand...
Click to collapse
If there ARE aGPS settings, they'd probably be in one of the PROVXMLs in the "OperatorPkg" OEM folder. In the AT&T ROM, they're in the "mxipupdate_oemoperators_107.provxml".
AT&T a
This is what I have for stock at&t rom.
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"ServerIP"= 199.88.233.169
"ServerURL"= h-slp.mnc410.mcc310.pub.3gppnetwork.org
"GPSMode"= value:2 (Dec)
"ServerPort"= 7275 (Dec)
"DynamicURL"= h-slp.mnc000.mcc111.pub.3gppnetwork.org
"TLSHostName"= h-slp.mnc410.mcc310.pub.3gppnetwork.org
re: supl.agps.emome.net
This is the server referred to here:
"ServerIP"="10.1.101.63" ; Set CHT AGPS Server IP as default
"ServerPort"=dword:00001C6B ; Set CHT AGPS Server Port as default
emome.net is a cell phone provider, see http://www.emome.net/channel?chid=256
Anyway, their name is Chunghwa Telecom, (CHT) - it's an internal IP for their SUPL server, similar to AT&T's
Imagine that Chunghwa is a large provider near HTC, so they use that for testing..
Yeah I kinda guessed they were something local to HTC, strange that it is hard coded in the dll though...
T-Mobile USA AGPS Settings
Compliments of a T-Mobile Rhodium ROM. Any Fuze users running on T-Mobile in the US should be able to use these, I guess?
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001
"ServerPort"=dword:00001C6B
"ServerIP"="10.176.29.225"
"Network"="T-Mobile Data"
"GPRSConnection"="T-Mobile Data"
"ServerURL"="lbs.geo.t-mobile.com"
"GPSMode"=dword:00000002
"TLSHostName"="lbs.geo.t-mobile.com"
There's no entry for "DynamicURL".
Captain_Throwback said:
Compliments of a T-Mobile Rhodium ROM. Any Fuze users running on T-Mobile in the US should be able to use these, I guess?
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001
"ServerPort"=dword:00001C6B
"ServerIP"="10.176.29.225"
"Network"="T-Mobile Data"
"GPRSConnection"="T-Mobile Data"
"ServerURL"="lbs.geo.t-mobile.com"
"GPSMode"=dword:00000002
"TLSHostName"="lbs.geo.t-mobile.com"
There's no entry for "DynamicURL".
Click to expand...
Click to collapse
any luck for t-mobile uk settings?
maybe it's an idea to change the title of the thread to all agps settings?
it could be useful to also have the open servers up here in stead of only the carier specific ones...
Maybe we should spread the word and not keep it to Raphael specific, since the AGPS servers are used on more devices..
just trying to increase our chances in getting a working AGPS setup for everyone who's looking, even not carier specific.
Maybe we can move this thread and change the title to AGPS settings wanted, try these and and report back if they work for you?
That an idea?
Hope we can get this thread widely spread so everyone can use it...
Da_G, could you check if the Nokia server is back in business?
I can't really figure it out..I get a $GPSCEL in my nmea log, but can't get a lock under my roof..
So don't really know if it's actually working..
ta a bunch..
Hi, I will check soon (very busy with image update)
for $GPCELL string, the paramater is degrees LAT / LONG - does it translate to location nearby? if not supl server may be feeding incorrect data.
Greeting.
Please note, this is not a solution for HD2. Only tested on TP2, Rhod100.
Thanks to yozgatg to his little but great work:
http://forum.xda-developers.com/showthread.php?t=623792
The cabs should work easily as yozgatg described in his thread. But a problem seems to annoy many people, included me, is the error message:
sub __main_bootandroid
Win32Exeception
Continue?
The solution I find out by doing some research on Bing, is:
1. Unlock the Registry on WM by changing:
HKEY_LOCAL_MACHINE\Security\Policies\Policies
00001001, Dword, 1 (originally is 2, change it to 1)
00001005, Dword, 40 (originally is 16, change it to 40)
2. after step 1, turn off the security warning by changing:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\
0000101a, Dword, 1 (Originally is 0)
After that the problem is solved.
Please note: This solution is only for people who has the right setup of Gen.Y Dualboot. If you see any information like "android is missing", that means your setup has problem.
My device is TP2, Rhod100.
Hope this solution can be useful to some people.
didn't work on my tp2 verizon ?