Related
Hi all,
I know we can connect to the internet using desktop connectivity with ActiveSync.
Now, I want to develop some simple WAP application and place it in my http://localhost (desktop IIS) for testing purpose. How can I browse it this site from my xda?
Anyone can help? TIA.
try http://<ip-number of Desktop PC>
It doesn't work at all. Beside, I use dial-up connection in my desktop, so the desktop doesn't have any ip before connecting to the internet, and I want to develop the application offline.
I tried to assign permanent ip address to my desktop in without connecting and it still doesn't work.
internal network
I doubt you have networked computers but here goes...
If you have a network card in your PC for networking. Then you have an IP address with this. normally "192.168.???.???" so you could use that.
Hope this may be of help ..
or http://127.0.0.1
You will need to be connected to the internet on your PC before you try to browse, or you will need to configure internet connection sharing while your xda is cradled for it to work.
Though I can't test this (no webserver running), it's gotta work:
Put your XDA in the cradle, and the go in VXutil and go to info. There, under the adapter called "Serial on USB," you should see some IP config info. The "Default Gateway" should be the IP of your machine (as your XDA sees it).
Just for kicks, mine turns out to be 192.168.55.100
I've tries http://127.0.0.1 but since my desktop computer is not network and I don't have any ethernet card installed, I cannot assign IP address to this machine?
What is Vxutil anyway?
Thanks.
rezz16 said:
I've tries http://127.0.0.1 but since my desktop computer is not network and I don't have any ethernet card installed, I cannot assign IP address to this machine?
What is Vxutil anyway?
Thanks.
Click to expand...
Click to collapse
POCKET HOSTS worsk ok
yes use usb asycn to pda -
setup VPN or non-vpn
first setup VPN network in computer
link to that in pda
no password ect
admin or guest with autologon on direct contact will do
I use say 192.168.100.100 etc
Is it possible to sync using activesync over the internet without running an exchange server? I'd like to be able to sync my XDA while I'm out and about to my PC at home.
:shock: :?: :?:
been trying to do the same for ages , but never found out how to do it
It can be done, under a few conditions:
1. You need to have a static IP address for you PC
2. You need to install Pocket Hosts or a similar free utility to map the WINS host name to your PC's IP address.
3. Your carrier / ISP must not have a firewall that blocks ports 5678 or 5679 (T-mobile seems to block this)
Remote active sync was designed with a local area network in mind and it is configured to connect to you computer by using the WINS name and not using an internet based DNS name. When you connect over an internet connection from your XDA, it is not able to find you PC.
If you install a free utility such as Pocket Hosts (http://zimac.de/cestuff.htm) you can configure the Pocket PC to be able to find you PC. This utility will allow you to configure you Pocket PC to map your PC Name to an IP address (similar to the HOST file on a Windows based PC)
Before I had the unlimited GPRS plan, I created a dial up connection to an ISP on my PocketPC Phone and it works perfectly. However, when I try the same thing over the GPRS connection, it does not work. From my end, it looks like T-Mobile blocks ports 5678 or 5679 on their firewall, which are the ports that remote active sync uses to complete the connection. (It looks like it is about to work, but then fails to complete the connection)
I have tried to convince t-mobile to fix this, but they keep claiming that it will not work out of the box, they don't know how to make it work, and they won't support it. They try to "upsell" me the sidekick or other device. I can't seem to get through to the right people. It seems crazy that a setting on their end blocks us from being able to sync over the air. After all, what is the point of a data connection if you are still restricted to using a cradle to sync. I understand that they don't want to support this and walk people through setting this up, but blocking the functionality seems pointless.
Anyone tested this on ATT? With number portability starting, I may have to explore other options. Anyone have an in at T-mobile that can get them to open up these ports on the firewall?
try www.yahoo.com
get an account (if you don't have one already)
login -- click on mail
the click the tab for addresses
on the next line to the right you will see the word "sync"
this will take you to download intellisync for yahoo
then follow instructions
sync you pda and your good to go, you will have your info on the internet and sync from anywhere
one more thing if youown a palm os and a pocket pc pda and you want to have both devices with same info (contacts, mail, notes etc. etc.)
the change the settings on your intellisync for your other device and resync
hope this helps it did for me...
Hi, I'm from the Philippines and my Network is SMART Communications. I tried synching with my active sync via GPRS but it seems it can't find my PC eventhough I used Pocket Hosts utility. It seems they block the port too. Anybody from Smart to please open the gate for us.
I've setup up my Win2k PC as dial-up server. And with the help of the Pocket Hosts utility, I can now be able to sync my Outlook over the air. But the call charges is killing me.
Jose
I've been investigating this myself too - and have to say T-Mobile's attitude is also alive and well here in the UK on O2 (via crapphone-whorehouse data support team).
I was actually shouted at by one of their 'tech' guys when I tried to persuade them that it could technically be done, but I needed to find out whether they were blocking the relevant ports. He eventually hung up on me! Fantastic service, eh!
I've been trying to get ActiveSync working over the Internet for the past few days and have finally managed to get it to work reliably. There are a couple of things that I have found...
Firstly, at least one of the ports required for ActiveSync does seem to be blocked when using GPRS (Vodadone UK in my case). Setting up a normal dial-up ISP connection results in first time connections to ActiveSync every time. It would be nice to know why there is problem over GPRS.
Secondly, my device was still connecting as Guest. Whilst reading through various other forums I found a fix that seem to work for this but it involves deleting a registry key. I wouldn't recommend it as I have know idea what else this key might be used for but it certainly solved the problem for me. The key I removed is HKLM/Ident/Username value is guest. The key is replaced automatically at some point (maybe after a reset) so if it stops working, you have to go and delete it again! There must be a better way....
That's great information, thanks.
I now have my device remote synching!
Just to summarise my steps to get things working on my XDA II:
1) XDA: Set up new work connection (don't you just hate the organisation of conenctions...) to a dial-up ISP over GSM, as O2 UK also block the ports required for activesync.
2) PC: Open sockets 990, 999, 5678, 5679 on my firewall
3) XDA: Use pockethosts to set up the IP address for my PC name
4) XDA: Change HKLM\Ident\User from guest to my normal PC logon user id
5) PC: Set allow network connections in activesync
6) XDA: Manually Connect to the ISP connection
7) XDA: Open activesync and click synch - away we go!
As an update to this, I had to do a full restore at the weekend after loosing all my data on the XDAII. The problem was not related to these changes but it made me look again at the Ident key. There are two keys normally like...
HKLM/Ident/Name Value<Your chosen PDA Name>
HKLM/Ident/OrigName Value<Pocket_PC>
This time I changed only HKLM/Ident/OrigName to the same value as in HKLM/Ident/Name and it connected first time. Also, this value does not seem to be reset unless you do a hard reset on the device. This may be better than changing the Username value though I have yet to try either on another computer where my preferred connection should actually be as a Guest.
Got it working
Thanks to andyclap's suggestions I finally got it working. It looks like T-mobile does not block any ports, but without the registry hack the error I got was the same as when I tested this over a dial up connection and blocked the ports on my firewall.
The other change since my last post is that I am using WM2003 and it requires you to set up a VPN connection to the PC instead of just using PocketHosts for the name resolution.
I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (for the Hermes). It should currently be "BTPAN1".
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc")
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
And it works!
Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. I imagine this will drain your battery in a hot minute, so bring your charger.
UPDATE (28-Oct-2007): Attached are some more beta releases of patched intshare.dll. I've created versions for most of the adapter names people have requested. By renaming this dll to intshare.dll and copying it to \Windows, Internet Sharing will use TIACXWLN1 (or whichever dll you use) when Bluetooth PAN is selected. I.e., if you use this, you will not need to make the registry changes above.
This will handle the registry part, but of course you'll still need to set up the ad-hoc network on your own.
UPDATE (03-Nov-2007): I've attached a beta version of the patched Internet Sharing app. It's in its own cab so it won't overwrite your existing IS. This app replaces Bluetooth PAN with 802.11b/g Wireless Ethernet. No registry hacking required. This app is well suited to replace the MS version on cooked ROMs.
If you use an adapter other than TIACXWLN1 then replace intshare.dll just as before.
UPDATE (08-Nov-2007): Attached is v 0.9.1 of the Internet Sharing Mod. This update addresses the 10 minute disconnect bug most people have experienced.
best,
fluxist
This is the first thing I'll try when i'm at home again!
I can't believe this! Waiting for this since i got my Hermes. Thx for this development. This is the greatest effort since Hard-SPL and WM6 upgrade.
Now I can connect my XBOX360 to the Internet without starting my PC and sharing it over PC-LAN. USB-Charger is at the Front of the XBOX360.
I hope it will work.
You said the Max-Connections can be reworked. Does this mean it will support Ad-Hoc AND WLAN-Routing to many recepients too?
This worked for me too on a Kaiser/TYTN II
I'm doing some additional experimentation to see what exactly this can do - for instance to replace a bluetooth connection to a laptop with a wifi one?
odessaranger said:
I'm doing some additional experimentation to see what exactly this can do - for instance to replace a bluetooth connection to a laptop with a wifi one?
Click to expand...
Click to collapse
not sure what you mean by replacing the connection. With ICS, obviously you cant share your connection over BT while sharing it over WIFI. and you can normally use wifi to connect to another computer by using an ad-hoc connection and manually entering a private ip on the same subnet for each computer.
this is awesome. worked perfectly for me.
After trying to stuff around with a proxy server for days and then you come along with something as simple as this....
boniestlawyer said:
this is awesome. worked perfectly for me.
After trying to stuff around with a proxy server for days and then you come along with something as simple as this....
Click to expand...
Click to collapse
Were you able to use more than one client connected?
I'll admit..when I saw this my first thought was that this was another "How can I do internet sharing via wifi" and the title was just misleading..instead I find myself very impressed with your accomplishment. Very well done! As a "hack" untill you figure out how to mod the dll which I'm sure is only a matter of time now that you have pointed everyone in the right direction, you can export the registry key for both the Bluetooth adapter and the Wifi one and "import" whichever one you want to use at a given time...it's not pretty but it should work.
Some issues of concern would be that the AP is wide open and can be connected to by anyone with no password etc...the bluetooth pairing allowed some security but using the wifi doesn't have the same shared key protection...or am I missing something obvious?
fluxist said:
I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
And it works!
When I used it I was only able to get one client to connect, however there is a reg value, HKLM\Comm\BTPAN1\Parms\MaxConnections that may help if it is changed from 1 to 2 (or whatever). But I haven't tried.
Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. So that's a good thing, although I imagine this will drain your battery in a hot minute, so bring your charger.
I was going to release a patched intshare.dll so that the normal Internet Sharing utility can do this, but I'm having trouble changing the section addresses in the dll to the right values after I add data. If anyone knows how to do this PM me and I'll give you the details.
best,
fluxist
Click to expand...
Click to collapse
thank you.
this work actually stemmed from my trying to share my phone's tethered connection with another client. by which i mean, my laptop is in a cafe online through my 8525 using Internet Sharing(IS) over usb. and i want to provide a connection, through wifi or ethernet, to my gfriends laptop. this actually isnt normally possible b/c WM IS and XP Internet Connection Sharing (ICS) both have 192.168.0.1 hard-coded as the gateway IP. so the phone uses that IP to give my laptop a connection, and my laptop tries to use the same IP with ICS. anyway, it fails because of this. i was able to get past that problem by going into Settings -> Wi-Fi -> Network Adapters -> Remote-NDIS and manually setting 192.168.1.1. This lead to the breakthrough with regards to wifi. prior to that id been trying all different ways to have the wifi adapter spoof the bt pan, however i could never get dhcp to assign an IP to the client. this is what it took.
and it's great that DHCP does in fact work here. it makes it dead easy for any arbitrary client to get online. just join the adhoc network as if it were an AP.
anyway, security-wise the ad-hoc network can use WEP or WPA, so security doesn't have to be a problem. the procedures for doing this are the same as normal.
and i haven't tried that reg key to enable multiple clients. but it looked like an obvious choice. i'll leave that as an exercise for the reader
fluxist
I ran into same issue with XP internet sharing. Another workaround is to have a linux machine do NAT( since you can specify the IP used there) to whatever other clients you want and have it connected via bluetooth dun or bluetooth PAND (which is the solution I use to give internet to my replaytv and a couple of laptops in the house)...my edge connection is my main internet feed..a cacheing proxy such as wwoffle, squid of my personal preference "polipo" helps alot to when using gprs/edge etc since it helps with the latency.
fluxist said:
thank you.
this work actually stemmed from my trying to share my phone's tethered connection with another client. by which i mean, my laptop is in a cafe online through my 8525 using Internet Sharing(IS) over usb. and i want to provide a connection, through wifi or ethernet, to my gfriends laptop. this actually isnt normally possible b/c WM IS and XP Internet Connection Sharing (ICS) both have 192.168.0.1 hard-coded as the gateway IP. so the phone uses that IP to give my laptop a connection, and my laptop tries to use the same IP with ICS. anyway, it fails because of this. i was able to get past that problem by going into Settings -> Wi-Fi -> Network Adapters -> Remote-NDIS and manually setting 192.168.1.1. This lead to the breakthrough with regards to wifi. prior to that id been trying all different ways to have the wifi adapter spoof the bt pan, however i could never get dhcp to assign an IP to the client. this is what it took.
and it's great that DHCP does in fact work here. it makes it dead easy for any arbitrary client to get online. just join the adhoc network as if it were an AP.
anyway, security-wise the ad-hoc network can use WEP or WPA, so security doesn't have to be a problem. the procedures for doing this are the same as normal.
and i haven't tried that reg key to enable multiple clients. but it looked like an obvious choice. i'll leave that as an exercise for the reader
fluxist
Click to expand...
Click to collapse
Impact on BT?
What a brill find. Well done.
Does it break anything with bluetooth?
Tx
can someone elaborate what this is for, maybe give a sample scenario on using this?
Is this basically allowing a computer to use the internet connection of the pda phone (ie EVDO, 1RxTT, etc.) through wifi, instead of bluetooth or USB cable? (ie tethering?)
if someone manages to get this working with xbox 360 make a tutorial plx ;D
superflysocal said:
can someone elaborate what this is for, maybe give a sample scenario on using this?
Is this basically allowing a computer to use the internet connection of the pda phone (ie EVDO, 1RxTT, etc.) through wifi, instead of bluetooth or USB cable? (ie tethering?)
Click to expand...
Click to collapse
thats what i wanna know , could i use my hsdpa connection via wifi to my psp?
I'll do a tutorial when i'm at home again. Maybe somebody with know-how can make a cab-file v1.0 for this "WLAN-Modem hack".
This surely will be a great app.
yes, your xbox and your psp should be able to connect just fine, as long as they support ad-hoc wireless (which i imagine they must). this hack will allow the phone to act like any normal wifi access point. the only difference is the client has to be seraching for ad-hoc networks in addition to normal APs.
the difficulty with creating a cab file at this point is that the registry setting is not persistent. that is, it must be set each time you enable IS. the setting is lost every time IS starts. this is why i am trying to patch the dll - so wifi will work as a normal, additional option in Internet Sharing (and hopefully this should be ready soon).
fluxist
when you say click "IEEE 802.11b/g Compatible Wi-Fi" do you mean the wifi network adapters in my case would be "tiacxwln compatible wireless ethernet"? im trying it on a 6700 WM5
I would LOVE to get this working on my TMO WM6 Wing, but I'm having issues:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
Got it - except on my device it's Programs -> accessories -> IS
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
Check - but is the T1ACXWLN1 device specific? If so, how can I find the interface ID on my device?
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
For me it's settings -> connections -> network cards, but I don't have an IEEE 802.11 listed. I connected to an existing AP, and found that my 'SDIO WLAN Wireless Adapter' does receive a DHCP address, so I tried changing it to 192.168.1.1...
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
Found this and set up my WING-FI network.
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
The client PC connects to WING-FI, but never receives an IP address...
What could I be doing wrong? Is it the hardware ID in the registry? I've created the network with WPA, then after the connection problems, with no security - but still no change.
Thanks!!
Ryan
neonstorm said:
I would LOVE to get this working on my TMO WM6 Wing, but I'm having issues...
Click to expand...
Click to collapse
Very likely the string TIACXWLN1 needs to be something different. Check HKLM\Software\WZCSV\Parameters\Interfaces\
There should be a key there with the name of your wireless adapter. It should end in "1".
And if not there, it should also be visible under HKLM\Comm\
Let us know how it works out.
EDIT: I just noticed you typed T1ACXWLN1. The string must be TIACXWLN1. That's "i" not one.
fluxist
I own a PPC6700 as well and I was able to get it working no problem other than the fact that our wireless adapter is not the same as the one mentioned. The reg edit is the same it's just the first network adapter in the list when you create the network settings.
fluxist said:
yes, your xbox and your psp should be able to connect just fine, as long as they support ad-hoc wireless (which i imagine they must). this hack will allow the phone to act like any normal wifi access point. the only difference is the client has to be seraching for ad-hoc networks in addition to normal APs.
the difficulty with creating a cab file at this point is that the registry setting is not persistent. that is, it must be set each time you enable IS. the setting is lost every time IS starts. this is why i am trying to patch the dll - so wifi will work as a normal, additional option in Internet Sharing (and hopefully this should be ready soon).
fluxist
Click to expand...
Click to collapse
If you send me the dll I could look into it.
i have some experience with editing dlls.
good work man
Greeting,
I have downloaded and install quite number of applications(eg: weather panel,weather watcher and etc) but it always prompts me internet connection not established, even through my phone dopod818pro conncected through USB to my pc and i can surf internet through my pc on my phone. Any ideas from any experts??
Thanks in advance...
The answer is the connection setting.
You should customize the connection setting and if you used proxy, please also correct the proxy setting.
Usually the setting use My work network for both, internet and local network, and also disable any bluetooth explorer.
I use also dopod 818pro and no problem with weather setting
asraf09 said:
Greeting,
I have downloaded and install quite number of applications(eg: weather panel,weather watcher and etc) but it always prompts me internet connection not established, even through my phone dopod818pro conncected through USB to my pc and i can surf internet through my pc on my phone. Any ideas from any experts??
Thanks in advance...
Click to expand...
Click to collapse
More detail...
What ROM, what IPL/SPL, any proxy settings etc...
Also, why is this in the "Prophet Mobile 6" Forum, when it is not directly related to "Mobile 6"?
I have created an SOCKS proxy server application to run on Windows Mobile phones. A SOCKS proxy is a proxy server that is capable of forwarding nearly all types of network traffic, similar to a NAT router. It is very simple to use. Simply type in the port you would like the proxy server to listen on (defaults is 1080), then click the large "Start Proxy" button.
In order to run this application you will need the .NET Compact Framework 3.5 installed on your device.
Some applications are SOCKS-ready and others are not. You can use FreeCap (freeware) to SOCKS enable any Windows application. ** FreeCap seems to have problems connecting to SocksProxy. Let me know if it works or doesn't work for you. **
I am *NOT* responsible for any fees charged to anyone for the use of this software. There is no warranty and no guarantee.
[UPDATE 2/25/2009]
I've completed the new version of SocksProxy. It implements socks version 4a. There is no security, so it will allow anyone to connect with any user id.
Please let me know of any issues you find.
[UPDATE 2/24/2009]
SocksProxy v1.0 Reboot
--------------------------------------------------------------------------------
I've completed the new proxy server. It looks pretty much like the old one, but I've anchored the controls to the edges so it should scale properly with VGA devices.
I've written a new Socks 4a proxy from scratch and completed ditched all the old code. It seems to be working pretty well, though a bit slow. I think I need to increase the size of my read buffers. I will have to write a smarter heuristic for determining the size of the buffer per connection though. I have them at 128 Kb now. I need to grow each buffer dynamically according to how it's being used, that way I don't create large buffers for connections that are only transfering small amounts before closing (downloading a small gif or javascript file, for example).
I'll probably release it tomorrow after some more testing.
BTW: I'm posting this through the proxy right now!
[UPDATE 2/24/2009]
I've decided not to move forward with the J2ME version of SocksProxy. I will however be writing a new .NET CF version. The current version's proxy is based on code I ported from a proxy targeted to the standard .NET framework. Some features in the standard framework are absent in the compact framework. When porting the proxy I pretty much just did it as quick and dirty as I could because I really wanted something that just got the job done. I didn't care how stable or 'good' it was because I hadn't even intended on releasing it to anyone. Since it looks like there's still a lot of interest I will be writing a new one from scratch. Don't expect too much; It'll be the simplest thing that possibly works, but it'll be stable and reliable.
I'll be naming this version SocksProxy 1.0 Reboot. I'm not upping the version number because I'm really not going to be adding any new features.
[UPDATE 11/4/2008]
I am working on a J2ME version of this application. I will no longer be maintaining the .NET version of the application. The SVN repository for the .NET version will continue to be available. I have no plans on taking it down.
I have decided to switch to J2ME because I will be able to reuse source code in a future Android release -- that is, if Google or someone adds the ability for Android to have more than one IP address.
[UPDATE 10/27/2008]
There is a usage issue with the application with certain configurations of Windows Mobile and Activesync. It seems that when the Activesync host (your PC) has a connection to the internet the handheld device will prefer to connect to the internet via the PC's connection rather than its cellular connection. This completely eliminates any benefit to using the proxy. Does anyone know how to prevent the handheld from routing its internet traffic back through Activesync? Note that this is NOT solved by setting the "Allow data connections" setting in Activesync.
[UPDATE 10/27/2008]
I have updated the SVN respository (https://pchasco.homedns.org/svn/SocksProxy/trunk). Here are the changes:
* Changed "Listening on" box to list all IPs on the handheld
* Added an IP box. Enter an IP to listen on that IP or leave blank to listen on all.
* Rearranged form
* Added "Use selected IP" button to insert into the IP box the IP selected in the list of available IP addresses.
You can enter any IP address in the IP box, but the proxy will fail to start if the IP is not valid for your device.
Hi pchasco,
Could you explain a bit more what this does (and how it works)?
The reason I ask is that I'm looking for an application for the PPC which allows me to share its internet connection by pointing the Desktop browser' proxy to the PPC.
This allows me to be connected to the wired network and using this proxied browser to browse even the blocked sites ...
Can your application be used for this?
If so could you also explain how it works..
I've ran the App on my PPC, and clicked start, this gave me an IP address
next i hooked it up to USB and pointed IE's proxy to that address...didn't work
I also tried to activate the 3G first and/or with ICS activated
but both times I didn't see a IP address...
I'm probably doing something wrong..
Thanks
This is a SOCKS proxy, so it does not work in quite the same way that a normal HTTP proxy does. For internet explorer you'll have to open the advanced proxy options and fill in the information for the SOCKS hostort entry.
Can someone please explain a sample usage of this software on Windows Mobile?
pchasco said:
This is a SOCKS proxy, so it does not work in quite the same way that a normal HTTP proxy does. For internet explorer you'll have to open the advanced proxy options and fill in the information for the SOCKS hostort entry.
Click to expand...
Click to collapse
Have you used this with ICS? In other words, share your internet connection with a computer and then have the computer connect via your sock proxy to the internet?
abdulzis said:
Can someone please explain a sample usage of this software on Windows Mobile?
Click to expand...
Click to collapse
I'm not sure what you mean. An example of how to use it or an example describing why someone would want to use it?
hoopsbwc34 said:
Have you used this with ICS? In other words, share your internet connection with a computer and then have the computer connect via your sock proxy to the internet?
Click to expand...
Click to collapse
I am not sure why you would need to use both SOCKS proxy and ICS at the same time. They are both means to provide internet connectivity through your phone to another device. If ICS were an option on my phone, I would use it over SOCKS unless the client device did not support it.
pchasco said:
I am not sure why you would need to use both SOCKS proxy and ICS at the same time. They are both means to provide internet connectivity through your phone to another device. If ICS were an option on my phone, I would use it over SOCKS unless the client device did not support it.
Click to expand...
Click to collapse
Basically, I'm trying to allow access to two networks at the same time. So I want to adjust my settings in firefox to point to my WM phone and your socks proxy. Then my other applications and IE can use my LAN. Otherwise, to get my WM ICS to work I have to disable my LAN connection which I need for certain apps.
edit... I'm good with using it without ICS, but that doesn't seem to work either. No matter when I click start proxy, I get an IP of 0.0.0.0 and if I connect my computer via USB I can't ping that address.
hoopsbwc34 said:
Basically, I'm trying to allow access to two networks at the same time. So I want to adjust my settings in firefox to point to my WM phone and your socks proxy. Then my other applications and IE can use my LAN. Otherwise, to get my WM ICS to work I have to disable my LAN connection which I need for certain apps.
Click to expand...
Click to collapse
Then setting the SOCKS proxy setting without setting any other proxy settings should work in Internet Explorer. I've been trying to test it, but my phone refuses to access the internet through the cellular connection right now; it's always going through my PC while activesync is connected. I can't get it to stop! The funny thing is IE on my PC is making its HTTP requests through my phone, then my phone is going right back through my PC to the internet!
pchasco said:
Then setting the SOCKS proxy setting without setting any other proxy settings should work in Internet Explorer. I've been trying to test it, but my phone refuses to access the internet through the cellular connection right now; it's always going through my PC while activesync is connected. I can't get it to stop! The funny thing is IE on my PC is making its HTTP requests through my phone, then my phone is going right back through my PC to the internet!
Click to expand...
Click to collapse
That's what I tried... but the IP address I get is 0.0.0.0 from your app. What IP do you usually get back when you run it? Do you just connect via USB? If ActiveSync is running is that an issue?
pchasco said:
Then setting the SOCKS proxy setting without setting any other proxy settings should work in Internet Explorer. I've been trying to test it, but my phone refuses to access the internet through the cellular connection right now; it's always going through my PC while activesync is connected. I can't get it to stop! The funny thing is IE on my PC is making its HTTP requests through my phone, then my phone is going right back through my PC to the internet!
Click to expand...
Click to collapse
I think there is a setting in ActiveSync that says "allow wireless connections when connected" sounds like that might be your problem.
Mr_Gee said:
Hi pchasco,
Could you explain a bit more what this does (and how it works)?
The reason I ask is that I'm looking for an application for the PPC which allows me to share its internet connection by pointing the Desktop browser' proxy to the PPC.
This allows me to be connected to the wired network and using this proxied browser to browse even the blocked sites ...
Can your application be used for this?
If so could you also explain how it works..
I've ran the App on my PPC, and clicked start, this gave me an IP address
next i hooked it up to USB and pointed IE's proxy to that address...didn't work
I also tried to activate the 3G first and/or with ICS activated
but both times I didn't see a IP address...
I'm probably doing something wrong..
Thanks
Click to expand...
Click to collapse
Sounds like the same thing that is happening to me. I finally got it to give me an IP address, but only if my data connection is inactive. As soon as the data connection is active it becomes a 0.0.0.0 IP address. Bug?
I tried to establish the IP, then activate the data connection... still doesn't work when I enter the IPort into my proxy list for firefox.
hoopsbwc34 said:
That's what I tried... but the IP address I get is 0.0.0.0 from your app. What IP do you usually get back when you run it? Do you just connect via USB? If ActiveSync is running is that an issue?
Click to expand...
Click to collapse
I am not sure why you are receiving 0 as your IP address. Check in Settings->Connections->USB to PC that "Enable advanced network functionality" is selected.
Gave it another try
Connected to ActiveSync (AS) loaded the application
removed the AS connection, started the application
It showed me the IP address op 127.0.0.1 (localhost)
Stopped the App, initiated the gprs and started the App again.
now i'm getting an IP of 0.0.0.0, I restarted the App a couple of times but no dice
I also checked if the advanced network functionality was enabled and it was..
Mr_Gee said:
Gave it another try
Connected to ActiveSync (AS) loaded the application
removed the AS connection, started the application
It showed me the IP address op 127.0.0.1 (localhost)
Stopped the App, initiated the gprs and started the App again.
now i'm getting an IP of 0.0.0.0, I restarted the App a couple of times but no dice
I also checked if the advanced network functionality was enabled and it was..
Click to expand...
Click to collapse
Hmm... I'm not sure what's going on here. 127.0.0.1 is the loopback interface-- It is only valid for your phone to connect to itself. If your computer attempted to connect to 127.0.0.1 it would connect to itself, not your phone.
pchasco said:
Hmm... I'm not sure what's going on here. 127.0.0.1 is the loopback interface-- It is only valid for your phone to connect to itself. If your computer attempted to connect to 127.0.0.1 it would connect to itself, not your phone.
Click to expand...
Click to collapse
Yes I know... :-/
Well, if I have time in the next few days I will take a look and see whether there is anything I can do. Maybe there is another IP address available on your device but for whatever reason I'm displaying the loopback instead of the external interface.
What happens when you set your proxy client up to go to 169.254.2.1:1080?
Mr_Gee said:
Gave it another try
Connected to ActiveSync (AS) loaded the application
removed the AS connection, started the application
It showed me the IP address op 127.0.0.1 (localhost)
Stopped the App, initiated the gprs and started the App again.
now i'm getting an IP of 0.0.0.0, I restarted the App a couple of times but no dice
I also checked if the advanced network functionality was enabled and it was..
Click to expand...
Click to collapse
Sounds like the same bug I am getting.
An example describing why someone would want to use it?
abdulzis said:
An example describing why someone would want to use it?
Click to expand...
Click to collapse
If you can't use ICS and want to connect to the internet from your desktop, you can connect your phone using USB and start this proxy, then you can setup your desktop connection to use the proxy to get internet access.