Is it possible ? Will it be sim-locked ?
Alternatively, possibly to get the t-01a unlocked ?
thx !
sanbeiyan said:
Is it possible ? Will it be sim-locked ?
Alternatively, possibly to get the t-01a unlocked ?
thx !
Click to expand...
Click to collapse
Its not possible to flash a t01a rom to a tg01, first you must do some conversion.
I am no expert and do not claim to know how this is done but here are a couple of things to get you started,
Cedesmith TGTool Info
arag0n85's TG01 to T01a convertor
These pages tell you how to convert a TG01 rom to a T01a but i'm sure it can be done the other way round, consider PMing them maybe.
leeston2379 said:
Its not possible to flash a t01a rom to a tg01, first you must do some conversion.
I am no expert and do not claim to know how this is done but here are a couple of things to get you started,
Cedesmith TGTool Info
arag0n85's TG01 to T01a convertor
These pages tell you how to convert a TG01 rom to a T01a but i'm sure it can be done the other way round, consider PMing them maybe.
Click to expand...
Click to collapse
Thanks for your advices.
But, I want to put the t01a rom to a tg01 for a Japanese guy. 'cos the
docomo t01a is sim-locked, and the normal tg01 didnt come with jap fonts and
input method.
Novembre5 flashed his TG01 with Japanese Radio and it got sim locked.
now if I understand right you want to flash a TG01 with T01A rom, I belive you should try http://forum.xda-developers.com/showthread.php?t=659589 and then change radio before flashing.
wafeeq said:
Novembre5 flashed his TG01 with Japanese Radio and it got sim locked.
now if I understand right you want to flash a TG01 with T01A rom, I belive you should try http://forum.xda-developers.com/showthread.php?t=659589 and then change radio before flashing.
Click to expand...
Click to collapse
I already posted that link 2 posts up, that will only change a tg01 rom to a t01a rom, to go the other way some modification of the batch file will be required.
I'm also trying to flash a Japanese ROM on my TG01. But so far, none of these methods seems to work.
1. flashing the official ROM from Docomo, using both SDDL and PIN-method, returns a file error, the tool from docomo says the file's corrupted (I didn't change anything)
2. changing the flash files' extension from .tsd to .tsw/.bin, same error
3. use the tgtool.exe/cotulla tool to repack the flash file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This seems to be the most promising way. I tried to unpack the original .tsd-file with the -T01A parameter and repack it with the -TG01 parameter, but still no luck. Anyways, I'm not too sure how this tool exactly works, so maybe you have better ideas. Any suggestions?
Related
As title is it possible to install the Tytn rom on the orange m3100 without problems?
I have a Hermes 100 (same as the M3100) that failed ROM upgs
I have a Hermes 100, that I believe is exactly like the Orange m3100 that I have tried to flash with both roms and it is now stuck in boot loader mode until I figure out how to get a rom flashed to it. No OS.
I have another one that is also a Hermes 100, the same, that flashed fine with the CHT9000 ROM.
*shrug* Not sure what's up. But I know what's down....one of my Hermes 100's!!!
Re: I have a Hermes 100 (same as the M3100) that failed ROM
holywood63a said:
I have a Hermes 100, that I believe is exactly like the Orange m3100 that I have tried to flash with both roms and it is now stuck in boot loader mode until I figure out how to get a rom flashed to it. No OS.
Click to expand...
Click to collapse
If it's a production model you should be able to flash from the boot loader. If you have tried the method described in the wiki (run the RUU two times, without disconecting the device) and that fails, you can try using the MaUpgradeUt_noID.exe and report if this method works for you.
BUT if it is a preproduction model (the one with 300Mhz processor) then most probably the rom upgrade will fail and you'll need to wait until sombody finds a solution for flashing those units.
Re: I have a Hermes 100 (same as the M3100) that failed ROM
pof said:
holywood63a said:
I have a Hermes 100, that I believe is exactly like the Orange m3100 that I have tried to flash with both roms and it is now stuck in boot loader mode until I figure out how to get a rom flashed to it. No OS.
Click to expand...
Click to collapse
If it's a production model you should be able to flash from the boot loader. If you have tried the method described in the wiki (run the RUU two times, without disconecting the device) and that fails, you can try using the MaUpgradeUt_noID.exe and report if this method works for you.
BUT if it is a preproduction model (the one with 300Mhz processor) then most probably the rom upgrade will fail and you'll need to wait until sombody finds a solution for flashing those units.
Click to expand...
Click to collapse
how do you tell if its a production or preproduction unit?
Re: I have a Hermes 100 (same as the M3100) that failed ROM
vapor said:
how do you tell if its a production or preproduction unit?
Click to expand...
Click to collapse
The preproduction unit has a 300 MHz processor, without the final button layout and slight different color.
EDIT: See both units here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello to all professional user:
As I check the informations of the softank with mtty.exe and device infomation, found some questions for CID, radio and rom upgrading.
On device informatin show as following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom date: 07/24/06
On boot mode:
Softbank SPL1.04, IPL1.01
mtty.exe shown the CID is HTCSVODAK801??HTCEUSB, and Level = FF,
(Not SuperCID)
Think the seller in H.K. only did changed the rom from 1.33.761.4 ?? to 1.23.708.4 07/24/06, but didn't made it SuperCID.
I'm wondering how can I use it in H.K. without SuperCID ??????
Because of bootloader version 1.04 is allow to flash rom without checking CID, and the rom date is before 12/01/2006, I assume it can be upgrade to new radio and rom versoin (as XDA reminder: X01HT which sold after 12/01/2006 is not allow to upgrade) !!! Am I right ?
So, can I make it SuperCID with " HTC_Hermes_SIM_Unlock_v2a " software pack and SSPL-HERM.exe under the above conditions ?
If not, is it possible for just bypass the procedure of SuperCID and go ahead for radio and rom upgrade ?
Thanks for your reply first,
I just wanna know, base on the existing hardware and software conditions, does my machine can/need unlock or not?
Because I'm afraid it hangs after update the AKU3.3, thanks thanks thanks !!!
I also got my Softbank X01HT in HKG, Mongkok to be precise and it was also flashed with Dopod rom 1.23 (english version). I just made it supercid as per instructions contained with in the wiki. Since then I have flashed it with the SA HTC rom 1.35 then downgrade the BL to 1.04 and have now loaded aku 3.3 HTC Test rom. All in english. I believe if you spend sometime reading the upgrade procedures contained in the wiki you will have no probs however I cannot comment on the chinese roms. This is a great site with some truely clever people working on these devices
Thanks the reply !!!
What is your SPL at first ??? does it unlocked before your flash the new rom ???
ricorico said:
Thanks the reply !!!
What is your SPL at first ??? does it unlocked before your flash the new rom ???
Click to expand...
Click to collapse
Originally it was SPL 104
When I flashed it with the SA rom 1.35 it went to SPL 109 so I downgraded back to SPL 104.
Now I have flashed it with HTC test rom aku3.3 and it is SPL 109 again
@all
anyone know how to change CHT to WWE or vice versa?
please teach me..what i needs and step by step guide..
thanks in advance..
serialzs said:
@all
anyone know how to change CHT to WWE or vice versa?
please teach me..what i needs and step by step guide..
thanks in advance..
Click to expand...
Click to collapse
It's easy to change from CHT to WWE, dump the rom, delete all *0804.mui (CHT or CHS, forgot) files, because the default mui is 0409 (WWE). Then rebuilding it. But the difficult thing is some róms have been locked, or without rgu, or even no dsm so that you can't dump it to build package.
But why don't you build your own rom ? the kitchen tools is out there posted by abusalza, with new sys found in hermes thread, and about OEM you can get OEM from jiggs' Rom. It's not difficult to build your own rom. Very very easy, I think.
Good luck.
medkid said:
It's easy to change from CHT to WWE, dump the rom, delete all *0804.mui (CHT or CHS, forgot) files, because the default mui is 0409 (WWE). Then rebuilding it. But the difficult thing is some róms have been locked, or without rgu, or even no dsm so that you can't dump it to build package.
But why don't you build your own rom ? the kitchen tools is out there posted by abusalza, with new sys found in hermes thread, and about OEM you can get OEM from jiggs' Rom. It's not difficult to build your own rom. Very very easy, I think.
Good luck.
Click to expand...
Click to collapse
bro,
you said i must delete all *0804.mui..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is this all i have to delete? or should i replace this with other files?
and i search all the files there's no *0409 files..
HELP..HELP..HELP
-=[serialzs]=-
try to delete all 0804 mui, then rebuild it. You don't need to replace by 0409 mui, because it's set by default interface for a WWE rom. 0804 mui is to create a CHS interface.
Try it, and report.
Edit: forgot one thing, you will have to work with initflashfiles.dat (in CHS rom it's in Chinese soo you can't use it in WWE rom), it will create your device's structure, like : Folder windows, in Windows there are Startup, start menu... quite difficult, but to make it easy the only thing you need is the new sys (with new build, you can get it from CHS or CHT rom, after delete all 0804.mui, or any languages) and OEM from jigg's Rom.
I hope you could understand what I mean.
please help me..i dont understand it..and this is the first i will modify my ROM..
i already delete all the *0804.mui files..whats next?
and can i emulate this rom first before i put in my unit? what's needed?
thanks in advance..
Now I been reading all of the stickies and after much confusion and some more readin i found myself into the correct Vista RUU loader, now for the ROM I found through orange one that has an extension of .nb0 and one on this forums ftp of .nbh which is the one I should be using once I do the soft spl and cid unlock?
I also kept getting a error connection saying my update utility is out of date, then with the Vista one(after installing all drivers etc) I get a connection error but only with those tool I am able to connect with the vista mobile device center with no problems before and after installing the 32bit drivers, should I be trying to load the files in the main phone menu or in boatloader? Cause I've tried both ways and receive the 2 previous mentioned errors.
I just don't know what I am doing right with those, if helps you guys help it is a Orange M3000 with I believe german ROM...sorry If I couldn't find the answer I have been reading for a few hrs before I decided I need to post for proper direction on doing this....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ahh, well, let me commend you brother for actually reading and searching before posting a problem! Much appreciated! But lemme ask you this...what is your phones info? IE-IPL/SPL, is it a G3 or G4? Once you can provide us that information, then would should be able to better assist you!
Sorry forgot that info for the SPL, I know its a G4 since the examples I read talked about the 3 leading 0's, but specifically it is
IPL/SPL: 2.16.0001
GSM: 01.04.10
OS: 2.16.1.1
Mkay, what I would recommend is going ahead and Hard-SPLing your phone(look for the Hard-SPL thread in this subforum, and follow the instructions EXACTLY!), and then upgradeing your GSM radio ROM to 1.69.X or something similiar, seeing as the one that you have is REALLY old. Upgraded radio ROMs offer better connectivity then older ones do. After you do both of those things, you can then safely upgrade to either WinMo 6 or 6.1...hope that helps!
Tried the HardSPL and got this:
Do I need to have a ROM(nb.nbh) loaded in the same folder as the Hard-SPL.exe I used?
No ! you don't have to have a Rom in the HardSPL folder,just Activesync with pc and run the HardSPL,it'll start to flash,don't worry if the screen goes white,it part of the procedure,but I assume you are trying it on WinVista.HardSPL doesn't work on Vista,better try on a pc with WinXP.
Hi All
A Search Orginal ROM for the HTC Monet/Lobster
AnY Ideas
If Help me, then Create New Os for this Device
And even someone here has this device?
Alas I gave mine to my dad two years ago; he still uses it but wouldn't be bothered with a new ROM.
But, I just need the original.
Itself, which gave Virgin Mobile - original
I won't be seeing him for a while, but if it is simple to dump the ROM (it wasn't for my X1), and you give full instructions, I may be able to do it.
I am sure there are others on here that can do it sooner.
ETA: Which ROM do you have on yours?
ROM WM6.5 is some uploaded, but probably without the USPL.
I need original dump to SD card
lobby rom
Hi, all my kids have lobbies and a 6.1 or 6.5 rom with the dab radio would be awesome. If you can tell me how or point me at a how to I'll get it sorted for you..
cheers
I do not know if I understand correctly
You have orginal System (ROM) for Lobster?
Hi,
I have devices I can do a rom dump from if you can tell me how.
As far as I know there is no rom available but I will give virgin a call on monday and see if there is anything I can get...
I am already in touch with Virgin Mobile on the original ROM
I search now, how to backup ROM to SD Card
Sorry, but you must tested metod backup ROM to SD
See this http://www.modaco.com/content/typhoon-variants-typhoon-modaco-com/201334/backup-your-typhoon-rom/ or maybe this http://forum.xda-developers.com/showthread.php?t=235734
Look http://translate.googleusercontent....le.com&usg=ALkJrhhQQrT4EdH_DtjErxDRw28cnbIaZQ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any progress?
Could you clarify why you need it?
From your first post I thought you were a developer going to create a new improved ROM, but is this just for you to fix your lobby?
I'm sure it is just a translational thing, but it's a lot of work to dump a ROM (if you are new to it), so people should know clearly why.
Hopefully someone can help you though.
I create new ROM, but first, I need to BackUp the original ROM from this device.
You understand, my Lobster run only into bootloader.
I must unlock CID in BL
Hi, sorry i didnt get an email notification of your replies,
Will take a look at those pages and have a go over the next day or two.
zarn said:
Hi, sorry i didnt get an email notification of your replies,
Will take a look at those pages and have a go over the next day or two.
Click to expand...
Click to collapse
Ok my friend, thanks
I'll have a go too if you like, and if I can find my Lobster after all these years.
@grayme Funny to have two guys from Hertfordshire on one tiny thread
It would be nice
Do you know how to get it into the bootloader? I've tried some normal combinations but haven't got it so far. After that I'm ready to go
Never mind... Just found it.