Hi,
I'm looking for a good case for the MDA Compact 5. It should be something like silicone or anything else where I don't have to pull it out and which is not too thick...
I'm just concerned that most of the TD2 cases wouldn't fit since the MDA Compact 5 (as well as the AT&T Pure) have a different shape on the bottom of the case...
So any recommendations?
yea same here i bought a skin for the hd 2 it does fit but little gap at the bottom i can live with it there are no other skin cases for the tmobile compact v looked allover so i recomend get a skin for hd2
Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
Does anybody know if there'll be a pouch for the diamond 2 like for the diamond? Or simply will the Diamond pouch fit the diamond 2?
the diamond 1 pouch does not fit the d2
Don't think there is an official pouch, pdair have quite a few different ones available tho.
G
If you look at the Tracy & Matt unboxing video, its shows an HTC Pouch in the box. However, everyone so far has said it doesn't come in the box. Conclusion? I think there is/will be one, but it will a separate purchase like the with the D1.
I've been looking at the Beyza pouch for the Samsung Pixon. The Pixon has identical size stats to the D2 (well its 1mm wider), so if its just a pouch you are after, that may fit the bill.
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
galvinize said:
Pdair are now selling a vertical pouch without belt clip, just ordered one myself.
available here
Click to expand...
Click to collapse
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Not sure how long delivery will take but will do when I get it.
Horizontal Pouch, HTC Brand
I bought this one: http://www.negrielectronics.com/touch-diamond-leather-pouch-p-2424.html
It is a Velcro closure and the phone does not fit well. further, it does not have a hard side to protect the touch screen. I assume this is a general case by HTC. I bought this, but I will probably continue to use the case from my Trinity, the fit is the same but this at least has some protection on the sides.
In a word, Disappointed. I am not sure why they skipped the case, and then fail to offer a decent one at launch time.
http://www.noreve.com/index.php
Looks like Noreve are going to do one too. Expensive, but nice, classy cases. See upcoming products at bottom of web page.
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Just be aware of these pouches
I did not get one with this or the TD1 ... with the TD1, the original one went on stock very quickly and I bought it for almost £10!
While the fitting was slim and snug, I couldn't help thinking that the tight fit had potentially caused light scratches on the rear (front I was not bothered as it had the protector on)
On the day I sold it, I did a very intensive clean on it and noticed there were indeed scratches that corrosponded with the pouch.
It only takes a small bit to be trapped in the pouch - you then slide the TD1 in and that bit goes down with it
I still don't know however what I want for my TD1, at the moment, I am using the original Ipod velour case that was bundled with I think the original 20gb ipods!
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-flip-top-_p04094c1213d039.html
http://mobile.brando.com.hk/htc-touch-diamond-2-bw-leather-case-pouch-type-_p04093c1213d039.html
or Krusell Luna fit
hsukirk said:
Asia model comes with those pouch similiar to original Touch Pro.
http://www.eprice.com.tw/mobile/talk/?prod_id=3306&tid=4110889
Click to expand...
Click to collapse
is it possible to buy these pouches any where, as i personally like these the best
da_daman said:
is it possible to buy these pouches any where, as i personally like these the best
Click to expand...
Click to collapse
Yes, I prefer this pouch too. Unfortunately the HTC designation of that pouch is not mentioned on their website (i.e. the HTC PO S390 as for the D1), so a purchase seems to be tricky....
I just bought this http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=360151845729 since i want as thin as possible.
This isn't going to appeal to everyone since they aren't bargin basement cheap but I've just got one of these cases delivered this morning. I went for Nappa cowhide black B on the outside and red suede leather for the lining with no belt clip attached and hidden magnet closure. The case itself looks fantastic, stiching quality is excellent (not a loose piece of thread visible anywhere) and overall protection where its needed the most (on the screen) is hard to beat with the wrap over flap on the front. It took a couple of weeks from order to delivery, but for a case which is made to your own specification, right down to having your name embossed on the front, that isn't bad. If you want a quality product made to you want it, and personalised, give them a go, I'd definitely recommend them. They do a range of different styles so if a fold over horizontal pouch isn't to your liking have a look at the other options.
Nice, i just orderd one too
Nice cases, not cheap although they look very nice...
I have found my HTC Kaiser case that came with phone and I'll use that until something better comes along.
Darrenives said:
I was looking at that too. I just want something slim and simple to not add bulk so it can slip in a pocket. Can you let us know what you think when it arrives?
Click to expand...
Click to collapse
Got the case yesterday, it adds quite a bit of bulk so if you're looking for a really slim fit then look elsewhere, other than that it is of good quality and has a nice professional look about it so is ideal for work. It also offers lots of protection for the device.
G
@galvinize: is it possible to take the belt clip off? doesnt look like in promo pictures - but in yours.
edit: could you please take a picture with the front up - or is it just a sliding case?
Hi Guys
Searching for that perfect case for my ATT Pure
I've not really found one I like for the Pure
(Leather flip/cover prefer book but horiz hinge is ok)
I've bought/tried some that where meant for the Diamond2
that unfortunately just did not fit
(shame some very nice inexpensive leather clip types for the D2)
Part of the problem might be that the Pure has a long metal trim bar around
the camera lens opening. The D2 as you probaly know has the triangular metal piece (I dont know what the Compact V has on its back?)
The problem with the Pure and the clip case was that the metal bar extended up from the surface of the case enough so the phone would not seat into the clip
Also appeared the clip in the D2 case was wider than correct for the Pure?
(but specs say D2 is narrower than the Pure?)
Anyway I'm hoping someone has seen the two side by side or
at least knows the facts
Thanks
KJL
PS I think I've found a case I really like but its for D2 and Compact V
Its not a clip but more strap or sleeve so it should be forgiving of a little
difference in width. I'll post what I find.
(its amazing the limited choices available for the Pure)
Yep, they are the exact same housing size
Hi
can anyone recommend a case preferably a rubberised one for my t mobile compact V, all the diamond2 cases i have triued dopnt fit.
some thing like this would be #Fab
http://www.htcpureaccessories.com/cases.html
many thanks in advacne
Does anyone using this case?
Luxmo Dual Black Leather Case Tmobile Htc Touch Pro 2
http://cgi.ebay.com/Luxmo-Dual-Blac...wItemQQptZPDA_Accessories?hash=item4cec5edd18
I have the original T-Mobile leather case that I bought on the release date, but it looks nothing like this. In fact, the one on the T-Mobile website doesn't even match the one I have. It's high quality rugged stuff.