Hi all,
I am having a hard time finding a solution for this problem:
The phone unlocks itself whenever a call comes.But it dont lock itself after the call ends.
This leads to automatic keypress especially when i use the phone in my car as i answer via the car bluetooth and never take out the phone from its pouch.
I have tried using various programs but they all created some other problems and i even had 2 hard reset the phone a couple of times.
Is there any way to autolock the phone after a call without using any 3rd party software?
Thanks
hi i dont use bluetooth but if i have the phone in my pocket locked and listening to music and a call comes in i answer it and they cut me off my phone just locks again did you make any tweaks to youre phone?
Cookie home tab has an option for lock after call. Install the latest versions of Cookie's home tab and CHTeditor.
Demon_man said:
hi i dont use bluetooth but if i have the phone in my pocket locked and listening to music and a call comes in i answer it and they cut me off my phone just locks again did you make any tweaks to youre phone?
Click to expand...
Click to collapse
I did have few tweaks but now i have hard reset the phone to factory settings and the card too.
polo735 said:
Cookie home tab has an option for lock after call. Install the latest versions of Cookie's home tab and CHTeditor.
Click to expand...
Click to collapse
Well,i did try that.But that option is not there in the latest 1.8 version of CHT.Then i tried 1.7 which had that option but the lock wasnt working.
nessqn said:
Hi all,
I am having a hard time finding a solution for this problem:
The phone unlocks itself whenever a call comes.But it dont lock itself after the call ends.
This leads to automatic keypress especially when i use the phone in my car as i answer via the car bluetooth and never take out the phone from its pouch.
I have tried using various programs but they all created some other problems and i even had 2 hard reset the phone a couple of times.
Is there any way to autolock the phone after a call without using any 3rd party software?
Thanks
Click to expand...
Click to collapse
check this thread and read post #6: http://forum.xda-developers.com/showthread.php?t=638678&highlight=screen+lock+bluetooth
hope will solve your problem
waichai said:
check this thread and read post #6: http://forum.xda-developers.com/showthread.php?t=638678&highlight=screen+lock+bluetooth
hope will solve your problem
Click to expand...
Click to collapse
I did try that.
But the phone stays unlocked inside the pouch too...
What to do now?
install bsb tweaks
pakure said:
install bsb tweaks
Click to expand...
Click to collapse
Thanks 4 the reply but its already told in the thread that the option for lock after call is not there in the latest 1.8 version of CHT.
nessqn said:
Thanks 4 the reply but its already told in the thread that the option for lock after call is not there in the latest 1.8 version of CHT.
Click to expand...
Click to collapse
BSB tweaks is different from CHT.....
pakure said:
BSB tweaks is different from CHT.....
Click to expand...
Click to collapse
OOps...my apologies
But i did try the "Auto Lock" option in that.Dint work.
Also i had some problems while using it with CHT,so removed it...
Anyway,today i installed PocketShield and everything's fine now
Thanks to all for the suggestions !
Related
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Media Player hangs the device if try and start it
96dpi
guido oskam said:
I have the problem that the icons in the sms/mms textmessage not work. Realvga is a just in 96 dpi. By other DPi standaards i don't have that problem I have no problem with other things.
Click to expand...
Click to collapse
I believe this is a known issue with the RealVGA App.
Cheers
BR
Brau0303 said:
I believe this is a known issue with the RealVGA App.
Cheers
BR
Click to expand...
Click to collapse
Oke it's a problem with realvga. what can i do abou it. where can i find the icons. Maybe i can replace them
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
hellejoep said:
Great release but I found some bugs:
1.
When I get a call while my bluetooth headset is connected it is only transferred to the headset if I pick it up on my bluetooth headset; if I pick it up on my Athena it is transferred to the speakerphone.
HJ
Click to expand...
Click to collapse
its supposed to be like that. it assumes that if you are answering it from the phone and not the headset then you don't want the headset.
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
Done, see the results in my first post.
ltxda said:
Before reporting bugs, please ensure you're on the new ROM then hard reset. You should perform a hard reset regardless of bugs or not to avoid some issues. Hope this helps some. Also, please update your posts and let others know if you actually did a hard reset after flashing and confirming the 4.0 installation or if the bug was discovered without doing the hard reset.
Click to expand...
Click to collapse
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
the no softreset is a new feature. i cooked in EVERYTHING.
the delay could be because its loading the new enlarged start menu. if u dont mind that then leave it. if u want the regular menu in settings ull have the turn off or in the config app.
PAPPL said:
Small things:
-No automatic softreset after HR configuration. Is this normal, or is this aborted because of No SIM-Card screen (cancel)? Did HR with SIM Card and still no automatic Softreset like usual.
-Device popups (start menu) do have a small delay. Is this normal?
EDIT: No wktask problem
Click to expand...
Click to collapse
The "No Reset" after customization is Normal for this release there is a reset after the carrier settings however.
Cheers
BR
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
guido oskam said:
I have done a hard reset. The icoons do work with 192dpi. But i prefer 96 dpi. I hope there is a solution
Click to expand...
Click to collapse
thats one of the issues with 6.1 and realvga. we need to get tobias to fix them unfortantly.
theobabis said:
First impression? amazing even if wifi isn't working and media player crashes it.
Made a hard reset immediately after, radio 1.50, x7500, 96dpi, xp pro sp2.
I'll come back if i have more issues.
Officially now, as activesync and bt8010 declare, i have an x7510
Thank you all girls and boys
Click to expand...
Click to collapse
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Pawel062 said:
i wonder what would happen if u turned off htc home before starting the media player. try that and report back. wifi cmonex must fix.
Click to expand...
Click to collapse
What would be best to do; sent cmonex a pm?
hellejoep said:
Great release but I found some bugs:
1.
When I hang up an incoming call on my bluetooth headset the customised ringtone is back to standard????
2.
When I hang up an incoming call on my bluetooth headset the volume is set to zero and I have to manually turn it back on....
3.
Wifi is not working with my current radio 1.57.00.
Cheers and any fixes are welcome,
HJ
All of the above problems are still here after a hard reset......any suggestions?
Click to expand...
Click to collapse
were you able to find a solution for problem 1 the issue with the ringtone being set back to default ? i am going through the same thing!
Skype
Under AP4 could not start Skype. Internet connection ok.
anyone with wifi issues
I want to ask you a few questions
- does the wifi totally refuse to turn on?
- if yes, then, when flashing AP4, did you have an interrupted flash? in this case, please describe me exactly when the interruption happened and how.
also, in this case contact me on IRC at http://java.freenode.net/ (channel name should be xda-devs, and pick a nickname as well). but a program will soon be available to make the fix easier and it can be published so I won't need to help personally.
- if it does turn on, then just check your wifi settings, you set up something wrong.
Issue: dealing with menus.
The issue is when I open a menu, by defult I should be able to press certain bottons on the keyboard in order to choose certain options. For example, when I attempt opening a video in TCPMP I would press file on the screen then press the letter "O" from the keyboard in order to access the option "Open".
It doesn't work in AP4.
Hardrested after the update.
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
xborfi said:
hello
I have strange problem with ALL of WM 6 & WM 6.1 that i tested here. (+10)
My Device is i-mate Jamin G4.
the problem with Sound. the sound suddenly stop and dissapeare. after reading from and search i found only 1 solution for that, I should go to Settings>Sound&Notification>Notifications and play a ringtone to get the sound back. In the case sound disappear whole system sound gone and even when somebody calls or SMS there is no sound. the above solution works in 95% of roms and if it dosent bring back the sound soft reset is needed and everything ok then.
another hint is that when press green call button and keypad appears if i press buttons for around 1 minutes whole sound system went and i should use the solution . i said that because i though it might help.
this problem with wm6 & 6.1 just forced me to use official wm5 which doesn't have this problem. this problem is not only mine as i have found on forums many have this problem.
Thanks for your attention!
Click to expand...
Click to collapse
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
dioxda2 said:
My personal advise......
please give it a try to Korand's 3.1 rom, just try for luck. (if you never do)
Click to expand...
Click to collapse
thanks for your attention. I am now downloading it and let you know the results. thanks
Kornad 3.1 faild
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
xborfi said:
I installed it and did a test on it. although the rom is VERY fast but problem remains !
I just pressed green call button then keypad appeared and i pressed some numbers and sadly saw that the system sound disappeared! any idea? I went to notification and played a ring tone and sound came back
any solution pal?
thanks in advanced
Click to expand...
Click to collapse
I am currently using this 3.1, keypad tones working fine (do you mean this? ).... ( Mine is a G3)
1. Is your speaker works fine? ( like playing music...)
2. did you try a hard reset?
3. optional flash with the lazy tool,
4.
yes, I did all steps except 3. Ill upgrade with that and inform you the results.
BTW please press around 50+ time on keypad to here keypad tones. they suddenly stop! my device is G4. I know that G3 sre better than G4 in wm6&6.1
thanks
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
paul c said:
I've had a similar issue recently: Korand's WWE3.1 (WM6.1), been running faultlessly for 3 months or so, on a Prophet G4.
Without having changed any configuration, or any new programs, I lost "most" sounds. No ringtones, though I could hear the other person on a call, via either of the 2 loudspeakers. I tried to play an mp3, and I got an error message from Pocket Tunes/WMP (could not play...) - and no alarm calls
I went to Notifications, but could not play any files. I got sound back by doing a soft reset and/or running pocketmax's wake up tweaks (run clock/calendar cleanups - I doubt these had anything to do with it...)
And then normal service was resumed, phew. I missed one more alarm call, and since then, all has been OK.
Click to expand...
Click to collapse
Thanks for sharing...
i'm having the same problems sometimes. it happens mainly after changing the volume via the up/down switch from off to vibrate or back to certain volume.
the solution is the same as in the first post is mentioned. go to sounds & notifications and there to incoming textmessage. play the ringtone. sometimes a second time doing that is necessary.
but as im testing many roms as well, it happens very often on wm6.1, not so often in wm6.
before i forget to mention, i own a G4 Xda Neo.
//edit: another problem i had once was after using Shadow Vista "My Edition"(wm6.1) from with the ring volume-tweak. during call i rised the volume a little bit and then suddenly my speaker stopped working. even a softreset hadnt solved that problem, then i switched often the volume and after MANY attemps i managed somehow to get it working again. i was kinda shocked
greets
guro
PS: somebody has also the problem when recieving messages and press a key to early that the orange flashled doesn't went off?
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
xborfi said:
well, it looks as if there is not clear solution for this issue. well i think i should go back to WM4 and forget about all other wm6 speed and goodies.
Click to expand...
Click to collapse
Try a different WM6.1 ROM!
i tried lots of stuff to solve this issue...no luck at all, after flushing the stupid Thai rom, i lost the sound....still trying
well, I tried almost 90% of roms here. all wm 6.1 are having this bug . I found PDAviet 4.0.0.0.6 a bit better than other, the sound bug happens less in this rom how ever it is still there.
oh! i found this here!
http://forum.xda-developers.com/showthread.php?t=371926
it looks as if this problem is with all roms, I think there must be a way to fix it on this biggest forum. still searching and reading an trying roms!!
hey guys,
since I moved to wm6 I was getting this bug, specialy with the sms notification.
but there was one rom which I did'nt have this problem if I kept the default rigntones. it was "Prophet_S4V.19701.01_F".
i'm flashing Prophet_S4V.19213.01_C, hoping it is that good too. altough I had the micro based on the s4v.19213 and and it was driving me crazy with this bug, I couldn't make it ring...
looking forward to help.
cya
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
xborfi said:
well i only found a temporarily solution for this problem. i disabled the keypad tones and the problem occurs each 1-2 days once but the problem is that it is still big chance of missing important Calls and SMS I hope developers found a solution for this BIG wm6 & 6.1 issue.
Click to expand...
Click to collapse
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
dioxda2 said:
not 100% of prophet does the same way~~~
1. did you really manually hardreset the prophet every new rom flash?
2. any software installed will affect the performance of it?
3. will it happens same when newly rom flash?
Click to expand...
Click to collapse
yes, i do hard reset by pressing comm + cam + soft > send button . each rom i try i first open key pad and press 30+ on it and i sadly see sound dissapear! it looks as if prophet is not compatible with wm6!
I am now back to the wm5 and eagerly waiting to see a solution or patch from the great developers here!
well. no fix yet pals?
i had some problem too and what I had to do is...
When ever I hold the pda, I will press the volume up button even in lock mode and if there's no any sound, that mean the sound already disappeared, I had to soft reset... I had this problem at least once in 2 days....
Hope there'll be a fix for this issue sooner...
Anyone know how to solve this problem?? The phone won't go into standby mode. it just stays at the lock screen
Video on my problem
http://www.youtube.com/watch?v=ej_TzilZITk
Anyone can help please??
no one can help me??
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
watcher64 said:
Looks like you are using the CHT lock screen, know issue, buggy, a search would have found it ....
Click to expand...
Click to collapse
I made a hard reset, the problem still exist...
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Well that lock screen in the video is not the stock lock screen, what mod are you using on it ....
Whatever mod you are using, could be the problem ....
shadowblade1990 said:
I made a hard reset, the problem still exist...
Click to expand...
Click to collapse
Are you using CHT lockscreen? Just use the standard one and it should be alright.
nicedude_abad said:
Are you using CHT lockscreen? Just use the standard one and it should be alright.
Click to expand...
Click to collapse
Ditto ...
Not sure how many times this needs to be said ...
But going to join you in saying it again ...
Like i said, i done a hard reset and the problem still exist, which means that the problem does not lies on CHT.
btw i am not using CHT, this video that i posted is just for reference of my problem. (which the phone does not go into standby mode and need activesync in order for it to enter standby mode) the lockscreen that i am using is the orginal HD2 lockscreen.
Same Problem
I'm having the exact same problem with my hd2. I've tried the following things to resolve it:
- Soft reset
- Hard reset
- Task 29 reset
- Formatting my sd card
- Using Artemis and Chuckyrom, both same problems
I'm going to try a stock rom now and look if that works.
Are there more people having this problem? any solutions? Tx!
EDIT: I've installed the stock rom and replaced HSPL with SPL. I'm still having the same problem. I'm going to send it to the manufacturer. Good Luck!
Would you be so kind to come back with the result ? This is a very confusing problem. There are lots of people suffering from this already !
solved
i two have had this problem and have just found out how to sort it out. basically i tried everything new radio, rom, getting rid of CHT
and in the end all it was is the usb connection!!!!
all you have to do when unplugging your usb cable is make it come out on a angle left to right. there are obviously some very delicate contacts that get knocked out of kilter making the phone think its still on mains power when its not hence never turning off
you can confirm this error by unplugging your phone going into backlight settings and seeing if you can adjust you light setting on battery power if when you adjust your light setting nothing happens you got the same prob as me
i just notticed today that wheni call my voicemail none of the phone onscreen buttons work
keypad,end call, speaker etc are all non functional. i have to press the hardware key to end call.
im using CHT EDITOR with stock TMO rom
could be 2 things related to MinimumTapTime for screen sensitivity:
1. Do you have BSBtweak installed? DO NOT change the MinTapTime setting. Revert it.
2. Did you do tweak#44 MinTapTime from SBOY2000's HD2 tweaks thread? change that value back to what it was.
didnt tweak anything ust used bsb tweaks and changed it back to normal
still same.
at the moment i cant even get to the phone screen
the phone is completely fn cracked out.
im seriously on losing my patience with this sht, 3 phones cant be all having same issues thats just impossible unless the OS is ****.
yesterday i installed the WCX ILLUMINATI SERIES HD2 EURO/TMOUS 21911 2017
rom and it worked fine
call screen worked and keypad as well
i installed the BSB tweaks and cookie tab home
and getting same thing now the whole call screen is inactive
cant even push the hardware end button to end the call
and an error popped out:
a problem has occured with cprog.exe
the phone is very buggy in general with the cookie tab and bsbtweaks
ok so i just tested with both of them setup separately and both of them make my phone screen go stupid.
with bsb tweaks it doesnt turn on at all
with cookie tab it calls but then none of the buttons work on it not even hardware end call...
god damn i hate this phone, less than a week i own it and im about to throw it at the wall.
is anything supposed to work with microsoft at all?
wtf is active about active sync? it takes 50 tries to get one connection
sorry for the language but this is relaly fn frustrating.
fuzzysig said:
didnt tweak anything ust used bsb tweaks and changed it back to normal still same... 3 phones cant be all having same issues
Click to expand...
Click to collapse
fuzzysig said:
i installed the BSB tweaks and cookie tab home ...
and getting same thing now the whole call screen is inactive ...
Click to expand...
Click to collapse
fuzzysig said:
...with bsb tweaks it doesnt turn on at all...
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
You returned the phone twice because you keep installing an incompatible program and getting an error????????? Then why do you keep installing that program??????????? You're giving WindowsMobile users a bad name.
*HINT 1:Check what date BSBTWEAK was made. IT IS NOT MADE FOR THE TMO USA HD2! If somehow you feel you must use it, DO NOT FIDDLE WITH THE "TAP TIME" SETTING WITHIN BSBTWEAK.
*HINT 2: DISABLE COokie's Home Tab Lockscreen, it causes more trouble than it's worth.
Quote from the BSBtreak thread:
heybhouse said:
Edwin320 said:
Hello all! ...
I installed BsB onto my phone and it worked fine. I installed it on my wife's phone, and altering the Tap Time resulted in her screen not responding to the icons (speaker phone, hold, etc) while in a call. My phone did not have that problem. I did a hard reset and reinstalled everything except BsB and her phone is now fine ...
Click to expand...
Click to collapse
"in case this helps anyone: one of the tweaks would free my phone when in a call (not the whole phone, just the phone screen) so i couldn't bring up a the keypad or go to speakerphone, etc. I figured out it was the "tap time" tweak. i'm using the usa t-mobile hd2." (pg. 117) haven't seen the menu issue but if you have it backed up might as well save time and do the hard reset. i wonder if chainfire might be the issue there.
Click to expand...
Click to collapse
why doesnt it say anything about beeing incompatible in BSBtweaks post by the author himself?
aaaaaaaaaaaaaaaaaaaaaa back at you...
dude please dont help me anymore you really suck at it
THIS>>>>>>>"DO NOT CHANGE THAT BSBTWEAK SETTING!!!!!!!!"
DOES NOT HAVE SAME MEANING AS
THIS>>> DO NOT INSTALL BSBTWEAK!!!!!!!!!!!!!!!!!!
thats if you didnt understand
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
stlfx said:
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
Click to expand...
Click to collapse
I hope this helps someone else.
The OP doesn't take suggestions well. He just comes on here to vent about how he can't make his phone work.
Hi all,
I have searched the forums and have not seen anything related to my question so please forgive me if this is repetitive.
I have never used a BT Headset before and I just bought a little cheap one today. It works very well and I only paid $10 bucks for it so I am quite satisfied but...
In the instructions, it tells me how to make "voice calls" from the headset but it says to "enable the function" on my mobile device and I cannot find where you "ENABLE" this on my phone.
Can anyone point me to where and how I do this? Do I need an app of some kind to do this or should this function be native to the SGSII?
If this may be ROM related... Please see my siggy for info...
Please advise...
Thanks,
Just pressing the button on the Bluetooth device for a second should bring up the voice controls.
Thanks for the reply but that is the problem... Pressing the button on the BT device does nothing. I hear the tone in my ear as the instructions mention but nothing opens up on the phone.
I realized that I did not have the voice Dialer apk installed so I installed it but still nothing happens when I press the BT Device button. It only opens when I press the app on screen and I want COMPLETE HANDS FREE...
Try making sure you have VoiceToGo installed and your rom didn't replace it with that homemyhome app. I never had voice dialer work with the BT button either so I had to stay stock voice apps.
What rom are you on? I can't see sigs since I disabled them a long time ago.
shadowofdarkness said:
Try making sure you have VoiceToGo installed and your rom didn't replace it with that homemyhome app. I never had voice dialer work with the BT button either so I had to stay stock voice apps.
What rom are you on? I can't see sigs since I disabled them a long time ago.
Click to expand...
Click to collapse
I have "Vlingo" installed and I think that is what you mean by "voice to go" if Im not mistaken. Vlingo only works if you press all of the appropriate buttons on screen and only accepts commands from the phones mic and not the BT.
I installed another app called "Choice Dialer Free" and it is much better except that I still have to enable the app first on screen and then give commands so that is still NOT what I want.
I am on CheckRom Revo.v4
***EDIT*** I found the Samsung Voicetogo app and am installing it now. I will see how that works and advise...
On my phone it works fine from the BT device I start it using the button on the BT device then talk into it.
Your phone isn't pin or pattern locked right? Because Samsung stupidly removed the ability to use voice commands when locked (normal slide to unlock is fine though) I had to give up security for the ability to use my phone when driving because of it.
I am also from Alberta so I know the laws you are dealing with that require voice dialing.
I wonder if any others you installed are conflicting with voicetogo which is the preinstalled Samsung version of Vlingo.
shadowofdarkness said:
On my phone it works fine from the BT device I start it using the button on the BT device then talk into it.
Your phone isn't pin or pattern locked right? Because Samsung stupidly removed the ability to use voice commands when locked (normal slide to unlock is fine though) I had to give up security for the ability to use my phone when driving because of it.
I am also from Alberta so I know the laws you are dealing with that require voice dialing.
I wonder if any others you installed are conflicting with voicetogo which is the preinstalled Samsung version of Vlingo.
Click to expand...
Click to collapse
I am using the JKAY Deluxe Mod that comes with my ROM and yes... I have the "slide to unlock" but under it I have the "pin lock" as well however... even when the phone is unlocked it is not working.
I just installed the "voicetogo" and will give it a try and report back...
shadowofdarkness said:
On my phone it works fine from the BT device I start it using the button on the BT device then talk into it.
Your phone isn't pin or pattern locked right? Because Samsung stupidly removed the ability to use voice commands when locked (normal slide to unlock is fine though) I had to give up security for the ability to use my phone when driving because of it.
I am also from Alberta so I know the laws you are dealing with that require voice dialing.
I wonder if any others you installed are conflicting with voicetogo which is the preinstalled Samsung version of Vlingo.
Click to expand...
Click to collapse
You ROCK my friend!!! With the Samsung "voicetogo" app reinstalled this now works as it should and LIKE A CHARM!!! Best $10.00 I ever spent at HMV!!!
I have clicked thanks to you and THANKS TO YOU!!! Lol...
No problem.