Related
This is the stuff I have bought for my G1.
I will post pics, to try and help anyone trying to make a decision on what to buy.
(alot of credit goes to ITSMEMORPHIUOS on youtube, He reviews iphone stuff. and through his reviews I got the confidence to buy half this stuff)
1) MOSHI case (ipouch=for iphone)= fits G1 perfect: excellent "everyday" case. Has special cloth sewn on inside that really cleans your G1. www.moshimonde.com (f**K IPHONE, had to get that out of my system). Washable, extra pocket for headphones. comes with really nice lanyard (to whip your kids with). SEVERAL LAYERS OF VERY THIN FABRIC NOT BULKY AT ALL.
2) niteize s-biner, size #1= to hang on moshi case
http://www.niteize.com/productdetail.php?category_id=29&product_id=152
3) SENA case= ULTRA slim case=, executive case REMOVED!!! NO NEED FOR COMMENTS LIKE THAT/THIS!!!!. www.senacases.com
4) SEIDIO retractable USB cable= it's ok, kind of short only 2'. really handy to carry though.
5) Cellet retractable wall charger.= travel charger, (*NOT TO SURE ABOUT THIS ONE, ONLY 500mA). BUT the car charger looks like a excellent product (but at the same time looks like a d*ck and balls????). (wish I had a car)
6) ZAGG invisible shield. OK ready, great protection, very UGLY look. DO NOT USE THE SCREEN PIECE.
---USE www.powersupportusa.com CRYSTAL FILM instead, can't even tell something is on the screen.
WHY: the Zagg gives orange peel affect (distorts image), Also you can see adhesive acts like little prisms and distorts image.
---Also I covered my wife's phone with Zagg completely and it totally takes away from the phone (women!!!).
--------SO on my phone I just used two small stripps on where the phone makes contact with a surface. much better look.
TIP: buy 70% isopropyl Rubbing alcohol from local pharmacy( will cost $1-$2 for huge bottle), same stuff that is in expensive computer screen wipes. But find good lint free cloth.
spray phone:
1) to clean
2) can apply crystal film when wet with alcohol
This is not a purchase but a great tip:
7) Piece of leather cut 4" x 6" ( and old leather jacket will do) great place to rest your phone while charging.
8) Turbo Charger= on the go, emergeny charger(uses AA)
9) AMZER 82000= cradle. ( got extra battery from t-mobile for free) still waiting for it to arrive in mail.
http://www.amzer.com/accessories-de...el=T-Mobile G1&mcid=1&category=&make=T-Mobile
10) sandisk 16 GB microsdhc = must have= works.
If you have any questions about these items, let me know, hopefully it will help you make your decision.
Oh and this is my first post with pics sorry if i F it up.
PICS are here
http://www.flickr.com/photos/[email protected]/
the pics were to big. see enlarged pic for details and don't forget to click on second page.
more pics, more pics, more pics
more pics, more pics and more pics
A bit G1 obsessive if you ask me, but I can see y, I love my phone too. But I dont think all the cases/pouches r necessary.
I didnt like the bulk of the pouch it came with. so I got the sena case, but
the sena case is very slim line and doesn't cover the phone 100% and you have to break it in to use it.
So then I ended up with the moshi pouch (black pouch), which is good to just throw around, phone slides in and out of it with ease. (the gay pink or peptol bismol one is my wife's).
I'm getting the same cradle. Do you know if the phone fits in it without removing the USb cover?
you don't have to take off the little cover there is little space for the little cover to sit within
Great, thats what I was worried about.
For the cradle can you charge the G1 and the spare battery at the same time? I was just wondering because I bought a crappy dock a while back and I could only charge the battery with the dock and had to connect a usb cable to charge the phone. Also is it hard to put the G1 in the dock or is it pretty easy. Thanks for the info man
AMZER 82000= cradle
http://www.amzer.com/accessories-de...el=T-Mobile G1&mcid=1&category=&make=T-Mobile
I got mine off of ebay, from Hong Kong, so I did not have the pleasure of unboxing ( came in Manila Envelope). But saved a couple of bucks.
NO IT IS NOT EASY TO PUT PHONE IN AND OUT. if you plan on using phone alot it is not easy. but if phone just sits in one place and you have bluetooth headset then it's OK. There is nothing wrong with cradle, The problem comes in with the little door has to be opened, then lowering the phone onto little usb connector. It's great for people who have there own desk at the office.
Comes with:
1) cadle: nice build quality (for made in china cradle),has charger port, usb port and 3.5mm stereo out. fingerprint and dust magnet. but I'm happy with product.
Blue and red led indicator on front of cradle, very bright. Might have to cover at night.
BLUE: glows when charger is plugged in. even if there is no phone or battery in charger.
RED: glows when battery is charging.
2) wall charger: 1.5 AMPS, nice can charge battery and phone at same time.
3) usb cable.
more pics of cradle.............
Where did you get that cradle?? OMG, I was just tell ing my friend I needed a cradle that had a charge port AND an audio out port. That's so freaky.
Doesn't look nearly as nice as yours, but all I really want is to be able to put in in the cradle on my dresser and plug my speakers into it. WOuld this work?
http://tinyurl.com/dxfge8 ?
http://cgi.ebay.com/USB-2nd-Battery...|66:4|65:12|39:1|240:1318|301:0|293:1|294:200
got cradle off of ebay. came from hong kong.
omg, love the cradle! I wish we had bluetooth stereo headphones capabiliy (A2D2). this would be perfect for that. I could just use it to charge my spare battery while streaming music or just get the giant 2400 mAh battery. What do you guys think?
How well does the Crystal Film screen shield fit on the g1, since it's made for the iPhone? My stock screen is getting really scratched up and I desperately need a new one, and you seem to have done your research
Also, I have been thinking about buying the cradle as well, and I have an extended battery that I use as my backup, and since the g1 won't fit on the charger with the extended battery on, I'd like to be able to place it on the extra charger, I just wanted to make sure it'd fit
I too am loving my cradle. Also wishing for Bluetooth Stereo. We'll see what this month brings I guess.
CRYSTAL FILM: was from powersupportusa.com But I don't see it on their website anymore.
It has an exact fit and is very smooth, people can't even tell i have a film on.
CRADLE: yes the extended battery fits in the back part of the cradle. the only thing is you cant close the back cover of the cradle.
You can put the phone and the extended battery (in the back part of the cradle with the cover door open) in at the same time.
Thats one spoiled-lucky G1 hahaha.
can someone post a working link to one of those cradles for me.. thanx a lot
I've had my shift for a few months now and I haven't bought a shoulder bag for it yet only because I was looking around for a particular bag, something like a gun holster that would fit right underneath the arm. Unfortunately, they don't make holsters like this for the shift (they should because I would buy one haha).
So I'm here asking what type of bag are you guys using with your shift? Links, pictures, experiences would greatly be appreciated. Thanks.
labnotes said:
I've had my shift for a few months now and I haven't bought a shoulder bag for it yet only because I was looking around for a particular bag, something like a gun holster that would fit right underneath the arm. Unfortunately, they don't make holsters like this for the shift (they should because I would buy one haha).
So I'm here asking what type of bag are you guys using with your shift? Links, pictures, experiences would greatly be appreciated. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=374137
Ladies might like this one: Coach Planner. It fits perfectly inside once you remove the address book. Use velcro dots to keep it in place.
Why not custom make to your own leather bag , just go to your own local leather makers , u can choose the type of leather - soft , thick , color , finishing , also the design - holster , shoulder , backpack , hand carry , pockets , any design u want . U will be surprised how nice it will look and also it will fits your daily usages with it . It may cost a bit more or double - depends on the design , material and so on , but it is worth it because it is the only one in this world ! So be brave and explore this , thks and best rgds - jimmunsw
anyone able to find one yet?
all the ones ive seen have the 4 circular face buttons
Yeah, i picked up some case from the pacific mall and the buttons where all for the g1 ( round holes ) .
Another thing ive noticed is that all the cases are not built to fit any extended batteries.
ahhh pooopooo
droid01 said:
Yeah, i picked up some case from the pacific mall and the buttons where all for the g1 ( round holes ) .
Another thing ive noticed is that all the cases are not built to fit any extended batteries.
Click to expand...
Click to collapse
do you mind posting pics
I ended up getting a seidio 2600mah battery and it is amazing. Not using a case until i find a shell made for dream users. Most of the round hole g1 cases are no good for our rectangular buttons. As for pics, now that ive got the extended battery i dont use the case anymore. I got it for like 8 bucks in pacific mall but it was only until i found a better setup.
I went to MEC in downtown toronto ( mountain equipment co-op ) and i found some awesome holsters in the backpack section. Neoprene cases with a velcro storm flap ( not magnetic so it wont effect the compass ) and a solid loop instead of snap attachment. for 8 dollars!! Awesome.
Needless to say i am all set now and also picked up a pelican for white water travels on georgian bay.
I highly recommend the bigger battery and the MEC holsters.
Anything less is just a condom over your phone.
Hi,
Does anyone have a battery cover for the MDA Compact V that they don't need, or are willing to sell?
Dropped my phone and took a chunk out of the battery cover, lets in a lot of dust now.
Can't find the battery cover for sale online anywhere, only full body kits.
Thanks,
FrankyG
A little search on ebay ...
http://shop.ebay.de/i.html?rt=nc&LH...pt=Handy_Zubehör&_fln=1&_trksid=p3286.c0.m283
anyone got that (custom..) back-cover with "rubber coating" ?
is that any good?
looks interessting.. as the standard backcovers for htc/o2 xda are just plain
plastic ..
love to have a backcover which is not that slippery/shiny .. also i love to use my phone lying on the table without the need to hold it withe the other hand ..
i owned a sony-erricson p1i before.. THAT was a perfect rubber-backcover.
tx
i bought a rubber battery cover two months ago. take a look on this post where i've put three pics of it.
http://forum.xda-developers.com/showpost.php?p=7932389&postcount=268
yes.. it looks great and exactly fitting ..
guess i take a try on those.. better than wrapping some ruber-glove the handy ..
gsm4world still sells them atm
search for ebay-item 130438357456
I was searching for a metal one, found not really sth interesting ... smb has a tip?
this wont do .. i think because of the anntenna major parts of the backcover must be of plastic ..
maybe magnesium would do the trick (the stuff my old HP HX4700 is made of)
have not received my new backcover yet (the rubber one) ..
Do you want Maximum Protection and Maximum Batterylife Yet you can only choose one or the other. well ive got news for ya . Introducing the Otterbox MAXIMUM edition Extended Case
This otterbox DEFENDER series Sets a good example for other phone cases on how they should be built. this case fests a Wamping 3500 Mah Hyperion Batterypack and Fits absolutely perfect Without even violating a percentage of protection.
This case took 2 hours to prep and 2 hours to make.
The case was a success !.
And now for the pictures.
Awesome! Just what I've been looking for. Gonna Google this to see how much it cost.
I'm afraid its doesn't exist till now . I crafted this whole design except the patent patent of otter boxes design
Ah, makes sense now!
What's protecting the battery's heat from the rubber?
some type of heat resistant tape. there are just a few things left that I have to do to complete it-
Maybe Otter will see this and start developing something like it! I would love to have a 3500mAH with the protection of the case.
Yeah I have like 4 of those for free.
Sent from my PG86100 using xda premium
Nice work man,
I did a mod like this on my defender for the hd2 HERE the case for that phone is a slightly different design + the battery is right in the middle of the case which helped.
I just did one for the Ballistic for the EVO which isnt as tidy but has been going strong for about 2 months.
I want to do a V2 of the ballistic a bit tidier this time .
Did you have to cut your backplate? I used the remainder of the extended one I used for the "bulge"
pics below>
EDIT Inspired by posting here last night, I was up late in the workshop V2!
Bottom 3 pics are the re-worked mod.
More people should try this mod on either Ballistic or Defender it takes some skill and the right materials but its totally do-able
Guys keep this up! I definitely need a case for this 3500 battery. I dropped this phone twice today. Face down! My luck may run out if I do it again.
oohaylima said:
Guys keep this up! I definitely need a case for this 3500 battery. I dropped this phone twice today. Face down! My luck may run out if I do it again.
Click to expand...
Click to collapse
Butter fingers lmao Ya man I know what that is like to drop one.. I had someone bump me and knock my brand new evo 3d outta my hands hit he hardwood floor face down 4 foot drop with a tpu case on it lol...
Glass didn't break phone worked fine But made my guts rolll
I always carry my phone with the screen facing outward in the Otterbox Defender holster/clip. You can't even tell there's a Seidio 4000 battery in there. My phone looks absolutely stock.
I'll posts some pictures when I get some time.
mail2n said:
I always carry my phone with the screen facing outward in the Otterbox Defender holster/clip. You can't even tell there's a Seidio 4000 battery in there. My phone looks absolutely stock.
I'll posts some pictures when I get some time.
Click to expand...
Click to collapse
Yeah man, throw some pics up soon, I love these mods!
one of the reasons why I got the evo3d over the sensation was the Extended battery/rugged case potential
Here are pictures of my 3D with the Seidio 4000.
First picture shows the back of the 3D.
Second picture shows the inside of the holster. It was dremeled to allow the bigger battery to fit comfortable.
Third picture just shows the phone sitting on the holster.
Fourth picture shows the phone clipped inside the holster. You can't even tell that there's a big fat battery inside there. =)
The last few pictures shows the cradle that i made out of pvc pieces. Besides not having to take the phone out of the case, you can angle the phone forward or backward when watching videos so it's very convienient.
(I've also made a simple mount out of plexi glass for my car that will work with the 3D inside the Defender. Which I will take pictures of and post after I get my car back from the body shop sometime this week.)
So is anyone going to put a tutorial on how to do these mods? I would really like to protect my phone with this beast of a battery on.
I wish I had taken photos as I was making the mods, but I didn't think about it. However, all you really have to do is SLOWLY cut out the back of the cover with a dremel tool.
*edit*
Oohaylima - if you were planning on using the 3500mah battery, then you don't have to dremel out the inside of the holster or cut the rubber on the case, bcuz I didn't have to when I had my 3500, but that battery didn't work as well as the Seidio 4000. I was trying to save a few bucks by buying the cheaper battery but in this case, you really do get what you pay for.
i have the same case and battery but i havent done this and i was wondering if the battery stays in or does it fall out
chamucoliz said:
i have the same case and battery but i havent done this and i was wondering if the battery stays in or does it fall out
Click to expand...
Click to collapse
The holster is what keeps the battery in. So if you use the case with the holster than it shouldn't be a problem.
mail2n said:
if you were planning on using the 3500mah battery, then you don't have to dremel out the inside of the holster or cut the rubber on the case, bcuz I didn't have to when I had my 3500, but that battery didn't work as well as the Seidio 4000. I was trying to save a few bucks by buying the cheaper battery but in this case, you really do get what you pay for.
Click to expand...
Click to collapse
Outstanding. I shall try this at once!
reaper24 said:
Glass didn't break phone worked fine But made my guts rolll
Click to expand...
Click to collapse
Right! That's one of the worse feelings in the world when it comes to damaging a vital electronic device.