alright well here the problem...ive been running energy for about 3 weeks now and its been running great! untill today.. it worked fine this morning..
but for some reason i let the phone go into lock mode and then i got a text..went to unlock it and the home screen just disappeared? sense trys to come on when i soft reset but nothing happens. it goes into lock mode i unlock( take forever to unlock) then all i get the windows menu..it seems like the system wont boot up or just freeses to the point of no return...does anyone have a clue or has this happen to anyone before...i have a u.s htc hd2
thanks for the help
Try this thread....
http://forum.xda-developers.com/showthread.php?t=594275
thanks! reading it right now!
You might also want to check back in on NRG's ROM thread. He has since released a new ROM. I remeber something in the change log about this.
Related
After i upgraded to this radio i have had interesting problems with my phone. ithought it was bricked and it very well could be. But sometimes it decides it wants to work but after a minute or two it cuts off. when a softreset or hard reset are perfromed i get nothing but a white screen. I can tell it goes thru the whole process bekuzz usually after putting it to sleep a few times i get my regular screen but the radio doesnt seem to be connected. any help would be appreciated. also the buttons on the face of the phone dont seem to work.Thanx
What is "Regular Screen"?
Regular screen means the screen u would normally get after your boot and splash screen. Or better said my today screen. Sometimes i cant get my today screen up. i had BL 1.04 before the upgrade if that matters any
Today screen is very good! your device isn't fully bricked. It may be a bad radio flash or it may be a hardware issue that merely coincided with your radio upgrade. Next time you get a today screen, try to flash one of the other sspl based radio only updates (find in wiki under radio only upgrades). Remember to practice safe flashing techniques!
usb on rear usb port. No usb hubs!
all winapps closed
running winXP Pro
activesync connected
screensaver/sleep mode off (flashing takes 20+ minutes)
i have flashed the 1.27 radio again without having my today screen and that did nothing. It went thru the whole process of flashing and everything but same results, just a white screen when booting up and afterwards. im downloading the 1.34 radio now.
You need to flash the sspl version which requires first being on the Today Screen (not white screen). Tri-color boot screen will show v1.09-Des if you do this.
i guess i will have to wait to see if i get another today screen and hope that it doesnt reset itself
does it matter that i can put my phone to sleep and wake it up over and over, i just keep getting the white screen. bekuzz now i cant seem to get my today screen back anymore
ok i have done what u said and flashed the 1.34 radio and still have the same problem. after the flash i had my today screen for a minute then it reset itself and now is gone and back to the white screen. also when i was on the today screen i didnt have control of the buttons only touch screen.
i think i may have a different problem. it doesnt seem to be resetting itself everytime it goes blank but that the screen is dying on me. hmmmmmm....... this is quite strange. i can also recieve calls. i cant answer them but the handset rings.
This may be silly but if I were in your place I'd just reflash everything with an official rom that replaces everything (i.e. SA 1.35) and see if that fixes the problem (though i might wait until somebody who knows more then me verifies this is a good thing to try). I'm wondering if the bad flash somehow effected something in your OS or something.
When I mess something up like this, I like to get back to a place which has been known to work - then I have a better idea of where I am (ie brick or bad flash)
Hope this helps
yea i actually went back to the original cingular ROM that came with the phone. so we shall see what happens from here. i also will have Cingular send me a new phone, i was tired of the scratches anyway. So far they havent noticed that my phones are supercid yet. Keeping my fingers crossed
Hardware problem IMHO...
Sleuth u are right. No matter what i do to the phone it yields the same result. My screen still turns off and the buttons dont work. iwonder what couldve caused this. i didnt drop it. well not recently anyway. BTW.... is there anyway to get the original 1.16 radio back on there. i tried doing it but it just hangs at 0%.
Thanks Sleuth for all your help, you are definetly one of the reasons this forum is helpful. That and that good ole WIKI.
When i restarted my Sprint Touch pro. It was working good for the first 20min then all hell broke loses.... My touchflo is flickering like crazy. Can someone help. I did 5 hard reset. That didnt work/
the same thing happen to me i had to get a new one from sprint
are you running stock rom? if not what mods have you done?
Try this .
turn off tf3d copy the files & insert in your windows file then restart.
see if it helps
Thank You but I got a new one.
this happens 2 me also ima try the fix but im getting a new one
I have a very unusual problem that i just googled and have not come across. I woke up this morning and found that my display wasn't turning on, as if the phone was off. I had encountered this problem before and a battery pull worked fine. Im on MR2 btw... but this issue is different, my diplay is completely dead, D-E-D, dead... after the battery pull i held the power button to start up again but all i got was the vibration on start up, no lcd screen response.
i know the issue is the lcd screen and i can replace it myself, if it had just been that. i have the total protection plan set up and can replace it, but my only issue is that the TB is rooted. upon fixing it they will realize it once the CM7 animation comes up. i need advice on how to handle this situation.
i cant bootload neither, display is completely off... i can hear sound going on so i know its on. Help please!
i had CM7 rc1.2, mr2 radio, clocked up to 1.6.. i was on bamf for a while but switched to cm7 2 days ago.
You cant boot into recovery mode? Try booting into hboot see if the screen works. If it doesnt just take it to VZW and when they fix it be like "What the heck! You guys rooted my phone?!"
alluzzion2o9 said:
I have a very unusual problem that i just googled and have not come across. I woke up this morning and found that my display wasn't turning on, as if the phone was off. I had encountered this problem before and a battery pull worked fine. Im on MR2 btw... but this issue is different, my diplay is completely dead, D-E-D, dead... after the battery pull i held the power button to start up again but all i got was the vibration on start up, no lcd screen response.
i know the issue is the lcd screen and i can replace it myself, if it had just been that. i have the total protection plan set up and can replace it, but my only issue is that the TB is rooted. upon fixing it they will realize it once the CM7 animation comes up. i need advice on how to handle this situation.
i cant bootload neither, display is completely off... i can hear sound going on so i know its on. Help please!
i had CM7 rc1.2, mr2 radio, clocked up to 1.6.. i was on bamf for a while but switched to cm7 2 days ago.
Click to expand...
Click to collapse
Have you tried running a RUU (ROM update utility) to return your phone to stock? Download one of the .exe RUU's (not the zip) to your computer from this page http://dougpiston.com/ThunderBolt/RUU/ and run it from your computer with your phone plugged in and turned on. With any luck it will return your phone to stock.
i cannot multi quote for $hit, anyways no i cannot get into bootloader because my display wouldn't boot up... but out of sheer luck i finally got it to work!!! and heres what i found! the screen has water damage! then i remembered this morning before getting my phone i tipped over a cup of tea my son left there. im lucky the phone even boots up! i guess facing the phone downwards saved my phone but not the screen... ill hit up VWM and see what they have to say.
nucher said:
Have you tried running a RUU (ROM update utility) to return your phone to stock? Download one of the .exe RUU's (not the zip) to your computer from this page http://dougpiston.com/ThunderBolt/RUU/ and run it from your computer with your phone plugged in and turned on. With any luck it will return your phone to stock.
Click to expand...
Click to collapse
does it matter which one i pick? of the RUU i mean?
[edit]
nevermind i got it, the process seems similar to updating touchpro2, half way through updating.. thanks man! although i got my phone working im going to be bothered with the watered down screen. i can simply open it up and clean it but that'll waste my total protection plan i have with VWM =P
alluzzion2o9 said:
i cannot multi quote for $hit, anyways no i cannot get into bootloader because my display wouldn't boot up... but out of sheer luck i finally got it to work!!! and heres what i found! the screen has water damage! then i remembered this morning before getting my phone i tipped over a cup of tea my son left there. im lucky the phone even boots up! i guess facing the phone downwards saved my phone but not the screen... ill hit up VWM and see what they have to say.
does it matter which one i pick? of the RUU i mean?
[edit]
nevermind i got it, the process seems similar to updating touchpro2, half way through updating.. thanks man! although i got my phone working im going to be bothered with the watered down screen. i can simply open it up and clean it but that'll waste my total protection plan i have with VWM =P
Click to expand...
Click to collapse
Glad you were able to get the RUU to work. I didn't specify one RUU because I figured you would use any one of them just to get your phone to stock, then you can take it to Verizon or mail it to asurion for replacement.
nucher said:
Glad you were able to get the RUU to work. I didn't specify one RUU because I figured you would use any one of them just to get your phone to stock, then you can take it to Verizon or mail it to asurion for replacement.
Click to expand...
Click to collapse
ye i already set up the order... cost $99 in deductables or some $hit... hopefuly it will be here tues/wednes.. thanks a whole lot for the help
alluzzion2o9 said:
ye i already set up the order... cost $99 in deductables or some $hit... hopefuly it will be here tues/wednes.. thanks a whole lot for the help
Click to expand...
Click to collapse
You're welcome. When you get the new phone don't hesitate to put CM 7 back on after you're rooted. I feel its they most flexible and up to date ROM you can put on an Android phone.
nucher said:
You're welcome. When you get the new phone don't hesitate to put CM 7 back on after you're rooted. I feel its they most flexible and up to date ROM you can put on an Android phone.
Click to expand...
Click to collapse
will come in tomorrow, i have 15 days to mail my damaged one or its 300 ;P. CM has always been my fav. its super fast. my favorite part is how fast booting up can be, unlike bamf sense 3.0. only problem i had with cm7 was that when it rings it rings once.. and when i get a voicemail notification it goes ape $hit.
other than that its still my fav.
alluzzion2o9 said:
will come in tomorrow, i have 15 days to mail my damaged one or its 300 ;P. CM has always been my fav. its super fast. my favorite part is how fast booting up can be, unlike bamf sense 3.0. only problem i had with cm7 was that when it rings it rings once.. and when i get a voicemail notification it goes ape $hit.
other than that its still my fav.
Click to expand...
Click to collapse
I had the same problem with the phone only ringing once, I changed the ringtone from Digital Phone to Bell Phone and that solved my problem. I read that certain ringtones don't work properly with CM7 and there is fix in the next update.
Hey guys i have the samsung galaxy tablet 10.1 model gt-p7510ma and the screen wont turn on. One day i accidentally hit the power and the volume buttons and now this device's screen wont turn on! I am at a complete loss as to what could be wrong. i was told that i may have to flash it back to factory to get it to work but i cannot find any stock rom download links. i have never dropped this thing so i dont know why the screen would just go out.
Does anyone have any suggestions tips or things that i may try to get this thing back operational? Right now it is just a 500$ brick. Has anyone ever heard of this happening?
EDIT: when you hook tab up to computer it shows up as APX in device manager under unknown devices. I dont know if this helps but that a little more info.
Steve
have you tried charging it?
Apart from that I believe this is non-dev related, should go to Q&A section.
It might be that your device has hung. Press Power button and keep it pressed for 10seconds or something like that. And then try to turn it on again.
Sometimes it hangs like that. Especially if you are on some unstable custom rom.
/Edzz
it is actually running the stock rom I never rooted it or anything like that. To the guy above, of course I tried charging it that didn't work. It doesn't even show that it is charging on the scree. I have pressed and held the power button trying to get it into bootloader mode, but that did nothing. Wonder why the computer is picking it up as APX. Wonder what that is? Thank for the suggestions so far!
If you are on stock and not even rooted, then just take it back to shop or service for warranty. You will get if fixed immediately or working back in a week. Better play safe.
In your case I would do so.
/Edzz
black screen and apx on the computer usually means you're in the mode needed for nvflash.
i forget how to get out of that mode, but google nvflash and apx you should be able to get an answer.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Hold the power button while holding one finger on the screen works everytime my locks up
dcj64 said:
Hold the power button while holding one finger on the screen works everytime my locks up
Click to expand...
Click to collapse
Ha!!!! worked thanx. Was sitting here trying to figure this out and Viola ur method worked right away.
I know this may be a day late and a dollar shoprt but i just wanted to let everyone know that i was able to fix the problem using the let the battery drain out and than power it on trick. I dont know how this guy put this device into APX mode but that is the only way i have found to get it out! Thanks for everyones help!
Hey guys,
I've been having this same problem the last 24 hrs or so now. I'm running custom rom Cynagoen mod ICS 4.03. This is apparently one of the more stable roms out there. Prior to this I ran an alpha stage jelly bean rom which ran just fine until last night. After leaving the screen off for an hour or so, the screen won't turn on after pressing the power button. I reboot every time and that seems to work. Is there something I need to do here? Should I look for another rom, maybe a 3.x? Thanks guys
AlphaJ1 said:
Hey guys,
I've been having this same problem the last 24 hrs or so now. I'm running custom rom Cynagoen mod ICS 4.03. This is apparently one of the more stable roms out there. Prior to this I ran an alpha stage jelly bean rom which ran just fine until last night. After leaving the screen off for an hour or so, the screen won't turn on after pressing the power button. I reboot every time and that seems to work. Is there something I need to do here? Should I look for another rom, maybe a 3.x? Thanks guys
Click to expand...
Click to collapse
Maybe try upgrading your CM9 install. 4.0.4 is the latest flavor of ICS.
AlphaJ1 said:
Hey guys,
I've been having this same problem the last 24 hrs or so now. I'm running custom rom Cynagoen mod ICS 4.03. This is apparently one of the more stable roms out there. Prior to this I ran an alpha stage jelly bean rom which ran just fine until last night. After leaving the screen off for an hour or so, the screen won't turn on after pressing the power button. I reboot every time and that seems to work. Is there something I need to do here? Should I look for another rom, maybe a 3.x? Thanks guys
Click to expand...
Click to collapse
You could try reading the entire thread. Hold the power button down while touching the screen. That fixes the SOD (Sleep of death).
Hey guys Im new to the forum, and new to android and I really need help. I bought an HTC one m7 today, used off kijiji, and it came with cynogenmod. While unrooting my phone and installing the stock firmware everything went smoothly until the end, I followed the guide, locked the oem, and installed from the rue file. I have a rogers htc one btw. After everything finished I went through the activation and to my disbelief my touch screen was barely working. It kept randomly clicking things in the middle, and I thought maybe after I restarted my phone it would be fixed. I restarted it, hard reset it, and even reinstalled from the ruu and it still isn't working. I figured if I was to reinstall cynogenmod than it would start working again, because before I uninstalled cynogenmod it worked perfectly. Can someone please help me because right now I want to cry like my phone is so hard to use right now, I can't even swipe down the notification bar. I've tried googling everywhere and I've found nothing. I've been trying to fix this for the last 4 hours
and guys it was perfect before I tried to unroot it, it was after that that all this started. Its a rogers HTC one, and the screens just going crazy like random apps keep opening and when i press back they open again. Does anyone know what I should do, I literally just bought this phone