Can someone point be in the right direction on how to get swype for the hd2 running android?
yes i would like to know too im not used to typing im used to swyping
http://www.mediafire.com/?my2apyivhuua7qy
there you go. I reuploaded it for you guys. Someone posted it earlier but I seem to have forgotten where
i believe shapewriter is still on market....use it... wonderful app for swype
looks like shapewriter was pulled from the market. The last available version was 3.0.9. It is available in the wild and the company that apparently owns the code isn't providing an alternative. In my opinion they are using the code in their paid non android keyboard apps.
Seems like swype is the next "display rotation" controversy. Companies are desperate to hold onto something to corner the market IMO. The swype beta also expired. I haven't found any available swype apps anywhere. I think there is one in the market but it's expensive. Preying on desperation. Guess we all have to pony up or buy a new phone.
Sorry to be negative, maybe it'll get better but be careful of copywrites guys. The software development world is looking for the next cornerstone after the hardware world has trickled us up to a point we don't need to buy a new phone every 3 months. They don't make cars like they used to do they?
**Edit** SlideIT is the app. Not sure of the price atm as I'm back in WinMo for a moment to upload these apks and I'll let you know which one is decent. But again, whichever it is, it may not last forever as the only one that was legally free with a lifetime ownership was shapewriter 3.0.9 but it may lose kernel support at anytime. Maybe android or some dev will create an alternative. I'm sure patents are all out there on this by now. Stupid but whatever.
I've tried numerous swype.apks for the past week or so and none is as responsive as the original. maybe its because android is still ran through the SD that swype (also ran from SD) is conflicting? but this is my opinion...
i've tried the swype apk from the EVO and DESIRE. desire link is dead but the EVO link is floating around somewhere still.. BUT, responsiveness is no where to be found. its slow.
I'm using the red themed version from this Droid Incredible thread and with the 7/23 zImage there is next to no lag. It works just about as well as it does in WinMo.
http://forum.xda-developers.com/showthread.php?t=701198
Tested both the above Swype and found Shapewriter 3.0.9. Both gave me Force Close errors and I had to switch to stock. Going to try the Droid keyboard now
**Edit (again)** Sorry, bad information. I was trying to use the apps by just dropping them in the AndroidApps folder. I uninstalled them and reinstalled using Astro and it looks like they all may be working. I'll have to do some testing to see what works the best. I apologize
Thanks for all the suggestions on this and posting a link to the Shapewriter 3.0.9 file looks like it may be a grey area in regards to copy-writes as I think you had to get it from the market while it was still hot which looks like it was brought down early June. O well.
This is probably a retarded question but how do you install the file once you've downloaded it to your SD card? Or do I need to download it from within Android to run it?
Nevermind, figured it out. Thanks anyway.
You can use Astro or Dropbox and just click the .apk file to open it. If the file you find is .apk.zip just remove the .zip. You may have enable Windows to show file extensions to do that.
Astro is in the Android Market
Dropbox is an app for your PC and an app for the phone so you can transfer files without rebooting into Windows everytime.
pappadj said:
You can use Astro or Dropbox and just click the .apk file to open it. If the file you find is .apk.zip just remove the .zip. You may have enable Windows to show file extensions to do that.
Astro is in the Android Market
Dropbox is an app for your PC and an app for the phone so you can transfer files without rebooting into Windows everytime.
Click to expand...
Click to collapse
Yeah I noticed the mention of Astro and went and got it and figured it out. Thanks anyway for the information without even meaning to give it lol.
Anytime, I'm just killing time waiting to see if GPS is going to be compiled tonight. I should probably just get some sleep. So looks like the post xanderdad referenced is what I will stick with. It's the only thing out there that's available that's free and updated. It's working fine so far so unless there's something better, I'll stop bumping this thread constantly.
Thanks for bringing this topic up dbiggs and everyone that replied. Hope I was of any help. This app is a must without a physical keyboard IMO.
Any reviews or anyone try the driod red one? My Swype is almost unusable it's so slow to respond. But i don't think it's a swype option. Cause when i set the pattern unlock code on mine, i have to draw really slowly cause it lags behind as well. Unless i just had an old one
xanderdad said:
I'm using the red themed version from this Droid Incredible thread and with the 7/23 zImage there is next to no lag. It works just about as well as it does in WinMo.
http://forum.xda-developers.com/showthread.php?t=701198
Click to expand...
Click to collapse
I am using the Green HTC one so looks like these 2 are decent options. The others worked fine too but I think I'm sticking to this one.
After the .apk is installed go to Menu > Settings > Language and Keyboard and Check the keyboard you want to have available. Then find an empty text box and long press till you see Input Method and then just select the keyboard you want.
Additionally, there are some settings within the Language and Keyboard you can tweak around to make it a little faster but it's pretty good stock. It takes a bit to load the first time and like anything, if you have a lot of apps running in the background, live wallpaper, old Android image and widgets while running on a Class 2 SD card it will probably be slow. Change as much of that as you can and it should get faster with newer Android builds and if\when NAND is in place to run off internal storage.
I've used swype for almost the entire time I was in windows and cannot even compare the speed to swype on this android. Swype on android right now is slow. This is using the EVO swype, and DROID swype (above post). Droid swype is much faster than the EVo, but still, will not compare to the swype from windows. I cannot even speed swype lol...
I'll wait patiently for faster builds in the future. For now, its back to the stock froyo keys.
And yes.. I've done almost ALL that is possible to speed my hd2oid up. Swype is still slow.
Ok, i got the droid keyboard with the 7/23 zimage, and holy smokes this is a godsend... it's basically identical to the winmo version. So glad it worked out good.
Not getting swype keyboard on darkstone's froyo .. I have zimage of 23rd as well
I Have enabled swype from the keyboard settings.
http://forum.xda-developers.com/showthread.php?t=701198
does a how to find anybody know where I could find a french version of swype for froyo???
NEW version 1.60.36.8214
Hello,
i found this 2 apk for swype from evo4g xda forum
So i ask for your help on how to add the italian language to the modded version and how to install it since it's a zip file and the recovery tips didnt worked for me since when hd2 reboot, it obviously reboot into windows.
Can please someone post the "mic version" with italian language or all languages?
Thank you in advance
why dont yall just sign up for the beta, it takes like a day or two foor you to get an invite back, and you always get the most up to date version.
at least, thats what im doing.
Also, swype is working for me as fast as ever. i never have any lag in the trace line or the responsiveness. its probably because you guys are using old versions of swype.
You need to sign up for the beta and you will be able to get the most current version of swype.
I was going to upload the current version of swype that i have, but i could not find it in the tree anywhere. normally all applications install to /system/app but this was not the case for swype.
if anyone can find out where swype installs itself, please let me know and i will be more than happy to throw the current versios of swype up for download.
Related
So I think this is a problem. Sometime when I swype certain word, I don't get the word I want. It's almost like the swype program had its own idea of which word I was trying to spell. For example, it doesn't know the word funny. I had to add to the dictionary. It also keep giving me "knorr" when ever I tried to write know.
I can only think of a few possibilities. (1) the original swype dictionary database isn't an american version (maybe uk english). (2) my touch screen calibration is off.
I'm am using axura's build, version 2271. I wonder if anyone is experiencing similar problem. I have tried adjusting the accuracy/spewed meter to no avail. I have used swype before on my hd2 (wm6 + android version) and never had this problem even though the screen calibration on my hd2 android was off.
Any advice, guys? Much thx.
I think couple of older versions of swype had that problem. Upgrade to newest one and it is much better. Just sign up for beta at their website and install the new one.
azzzz said:
So I think this is a problem. Sometime when I swype certain word, I don't get the word I want. It's almost like the swype program had its own idea of which word I was trying to spell. For example, it doesn't know the word funny. I had to add to the dictionary. It also keep giving me "knorr" when ever I tried to write know.
I can only think of a few possibilities. (1) the original swype dictionary database isn't an american version (maybe uk english). (2) my touch screen calibration is off.
I'm am using axura's build, version 2271. I wonder if anyone is experiencing similar problem. I have tried adjusting the accuracy/spewed meter to no avail. I have used swype before on my hd2 (wm6 + android version) and never had this problem even though the screen calibration on my hd2 android was off.
Any advice, guys? Much thx.
Click to expand...
Click to collapse
I had the same problem with a couple of different roms. I just retrained it. It does make you wonder tho
Like the 2nd poster said, some versions of swype are missing words. If you go to the Bionix V discussion thread, there is a new version of Swype. Correct me if I'm wrong, but I'm pretty sure that would work fine with Axura. I would flash that if I were you. I had that problem and it pissed me off until I found out about it (in the SBG thread somewhere, I think).
download latest swype.apk
go into your files on phone, with w/e u use.
system/lib/
delete swypecore.so
go to system/app/
delete swypetips.apk and swype.apk
go back to system/lib/ make sure the swypecore.so is not there, if it is delete it.
reboot, you must reboot.
now put the new swype.apk in system/app/
now use swype installer from www.beta.swype.com
to update your language files, and BAM you got you a new language pack and new swype.
Much thanks for all the help, guys. One more question, do these beta expires? The last couple of them I have (on my HD2) kept on expiring which was really annoying (but not as annoying as dealing with the bad words my swype is outputting).
Thanks again.
Update: Alright. Got it all sorted out. Much thanks, guys. This was driving me nuts. The newest swype also look pretty nice too.
So now that the new Firefox 4 Beta 5 is out, I personally think Firefox is the best Tablet browser available. Its unique approach to tabs works well on a tablet, as does the back button. The earlier versions were super slow, but I think this new one has caught up a lot. I now prefer it greatly to Dolphin HD.
I have installed the following add-ons to maximize my Nook Color internet use:
-Quit Fennec- force closes after last tab closes, a must
-Phony- easy User Agent changer, another must
-readability- fixes messy pages to fit
-Full Screen- Does what it says and makes browsing a joy
What do you all think?
I agree. Seems stable and fast (compared to Dolphin). I also used Sync to import all my passwords and favorites from my desktop.
I'll give it a try, it was even slower and klunkier than Dolphin HD last time I tried it, I use Opera 10 on my NC and it's great. I've tried Mirin too but something about that browser bugs me, can't really put my finger on it.
Can you guys post an apk? I can't get to it from market or Mozilla's website.
Thanks for the tip. Every browser seems to have 1 thing wrong with it so ill definitely give this one a try. I would like opwlera best but i can't get over the terrible way it handles initial zoom.
I agree, I can't find a working link to download the apk. I fennec but it installed an update that didn't work and now I can't install Firefox. Bummer
Would appreciate the apk as well. Thanks
FTP is your friend, as old-school as it is.
ftp://ftp.mozilla.org/pub/mozilla.o...roid-r7/en-US/fennec-4.0b5-en-US.eabi-arm.apk
Thanks for the link. But everytime I try to install this, it seems to progress, asks about permissions, but at the end, says "program not installed". I've enabled usb debugging, used titanium backup to uninstall the previous left overs of Fennec, and I still get this message. A little stumped.
is this compatible with Android 2.1 with the latest dalingrin OC? I cannot get the apk to install. launched the Package Installer and installation would not get through saying "Application not installed"
Also each time I start the installer, it would warn that the app will replace an existing appl, but i do not currently have a fennec/firefox appl installed. Titanium Backup does not show any fennec/firefox app.
Can someone help please?
thanks
finally able to install by tweaking the the build.prop as suggested here:
http://forum.xda-developers.com/showthread.php?t=938114&highlight=firefox
if anyone else was having the same problem. that tweak fixed it for me.
I gave this a try based on this thread. While I do like the UI and it has a snappy response, the app itself is not ready for prime-time. If you try to enter numeric information into a field, it causes the insertion point to jump around. For example, I tried to visit the website for a local library and when it asked me to enter in my library card #, instead of "1234..." it would go "1243...". The insertion of characters as I typed them magically skipped around in the field. This was not isolated to just that website. Happened on a registration form on Adobe's site as well. Very annoying.
Looking forward to future updates.
--ex
I personally think Miren browser is the best for the nook. I have it set so that that status bar/tabs stays around all the time, and the floating buttons always hide. The only issue is that it doesn't work well with image links when they are opened in a new tab. In the new tab it will instead go to the link of the picture, not the actual link to the website. I will try this though, I tried the beta a long time ago so it will be nice to see how far they have come.
evilxenu said:
For example, I tried to visit the website for a local library and when it asked me to enter in my library card #, instead of "1234..." it would go "1243...". The insertion of characters as I typed them magically skipped around in the field.
Click to expand...
Click to collapse
I have noticed this too. The only (painful) solution I have found is to very slowly type with a pause in-between each letter. Thank goodness it can sync with my desktop Firefox and slurp up all my passwords to avoid this mostly.
OMG SERIOUSLY? I tried Firefox last night for about 20 minutes and it GROUND TO A HALT each time I tried to search or put input in the URL bar. It'd freeze, if I tried to do anything I'd get the FC/Wait dialog, I hit Wait several times.. Finally killed it, tried again... Same thing. Eventually it'd load the page.
If you all think it's great, I wonder wtf is going on with my install. Maybe I need to uninstall it, make sure any old sdcard stuff is cleaned (I had it installed a few betas ago) and try again. Totally unusable for me right now.
I'm hoping the FF Deskop Ad Block Pro extension works with the FF mobile soon. That can make the internet a much more bearable place.
Works for me. But can't t flash to work. Works in dolphin and stock
Sent from my Nook Color (zoom2) using Tapatalk
will75 said:
Works for me. But can't t flash to work. Works in dolphin and stock
Click to expand...
Click to collapse
Yeah, Flash doesn't work so far.
i haven't had a chance to try it on my NC yet, but i think we might now be official.
http://stage3-beta.swype.com/android/supported/
I'm installing the update now i will tell you if it works.
ngrenn35 said:
I'm installing the update now i will tell you if it works.
Click to expand...
Click to collapse
Thanks! Don't forget to include what ROM you're running.
Honeycomb build 4 not working w swype
I installed todays swype and i can tap out words but not swype. I know i am using the right keyboard because it does trace but the words wont display.... Honeycomb build 4.
Works great for me on CM7 v14
It looks great but I can't actually use the swype function, like the poster before said.
Running CM7 and when I swype the border flashes blue but no word appears. Otherwise, it's nice to see some large screen support from Swype. I love it on my Vibrant
Doesn't work for me (NF 0.6.8.3). I can type but can't Swype.
It worked for a second then quit, cm7 v14 Keyboard is nice for fat fingers. Soo close.
I have phiremod v4.1 and the swype does as the others said; I can see the keyboard and the swpe gestures, but no words appear, I can tap them out as with the regular android keyboard, but swyping does nothing. It does make a noise after a swype gesture though.
Also when I put the NC in landscape view, the skype app takes up the entire screen.
still not able to try on my NC, but when swype does that behavior on my nexus one, if i switch to the android keyboard then back to swype through the input method selector, everything works great.
fzr-r4 said:
still not able to try on my NC, but when swype does that behavior on my nexus one, if i switch to the android keyboard then back to swype through the input method selector, everything works great.
Click to expand...
Click to collapse
You may well be my hero. I can't confirm that it worked for sure, as it threw a licensing fit since I used it on HC instead of CM7, so I'll revert back to HC and try this again. The licensing fit never occurred until I tried what you suggested.
Tried that method of switching to Android KB and back, still didnt work for me, same as everyone else.
I'm getting the same results on CM7 v17. I'm also getting a message that says swype is configured for another device and may not work correctly when I first switch over to it.
g
Boinky said:
I'm getting the same results on CM7 v17. I'm also getting a message that says swype is configured for another device and may not work correctly when I first switch over to it.
Click to expand...
Click to collapse
yeah, shoot, me, too. eMMC Honeycomb 2nd edition.
Sent from my Nexus One using XDA App
I have read in another thread that Nookie Froyo tends to spout random IMEI numbers when an app asks about the device it is installed again. Swype authenticates the beta by IMEI and you are limited as to how many IMEIs you can install it on. Thus the licensing problem - install Swype and it locks itself to the reported IMEI. Then run it again, and it thinks it's installed on another device.
Licensing errors
I'm also getting licensing errors but the keyboard does appear to load correctly on, CM7 #17,
damn. Was so excited too. Wont swype. Have been dying to put it on my NC, typing on this thing sucks.
Sometimes the betas get hacked (but no posting warez here!) so they are not IMEI locked anymore. Unless we can figure out a way to report a stable IMEI on the NC across all firmwares per device, that may be our best bet .
Will try when the WSVGA will be supported in french..
Yes I can confirm what is being said here about the IMEI... Definitely the root cause here as reported on the swype official forums.
The way I see it, this can be worked around without the need to hack the Swype package. My understanding is all we need to do is spoof the telephony stack a little better, so that the IMEI is consistent. I am at work so I cannot do too much to find out how hard that would be.
android API call for getting IMEI is
android.telephony.TelephonyManager.getDeviceId()
First step would probably be to override this function and just report to logcat to confirm the Swype Licensing process (Would have to check both "Swype installer" and "Swype" applications this way, full end to end install process) calls that function to retrieve the IMEI instead of using another method.
Then if that works, override the function to return a static number. Does anyone know if the IMEI can be used to reverse lookup manufacturers and devices models the same way MAC addresses can? If so, we may need to carefully pick the number returned so that if Swype does a reverse lookup it thinks we are using a valid device - Such as Galaxy tab, which I believe is functioning under the latest beta.
I am definitely not an expert android dev, I barely understand this stuff so far. Just hoping to get the conversation started because I'd really like to swype.
Would someone be kind enough to send me a link to a STABLE version of a Swype apk for my Eris. I have tried searching the boards for a file, but I mostly find tuts that either have the newest unstable apk, or are for phones that are not even close to Eris specs. Thanks in advance and I am much obliged.
Sent from my ERIS GSBv2.1 using XDA App
I'm not so sure there's a stable swype release for the eris running gsb. I'm pretty sure you are either in the beta and deal with it or you get a different keyboard and deal with that....
I figured there might not be...more or less I want to try if out and see if I like it, I just don't want to install a build that has major bug issues.
Sent from my ERIS GSBv2.1 using XDA App
FWIW, I've been running swype beta on GSB and on FroShedYo's, xtr's, etc.. and the only bug that I've found that's consistant (to me) is that after you reboot, you have to long-press a text field to change input method back to the regular keyboard and back to swype before it will work...Otherwise, it works great for me again until I reboot.
Stable
I have a version that was sent to me that I haven't run into any problems with.
email me if you want the apk. I'm thinking about trying it out on my archos 101 tablet.
robert dot beers ii at gmail dot com
Matt
there are two that I know of but its against the rules to link to them directly.
search google for the following and find it yourself. =-)
swype_1.60.36.8214_HVGA
there is another one but I can't remember the file name since I dont have my phone on me today. but 1.60 that was floating around 6 months ago never expired. most of the other versions did, but I believe I had a 2.60 version (or close to that version) that worked just fine too.
oh, and i've found no issues running swype on GSB 2.2 or any other previous version. It sticks, and does good. the only issue that isn't a big deal is double tapping any word to change it (because of a bad swype) is testy as the new GB selection tool likes to auto apear "cut or copy" I have to select cut, in order to reswype in place of that selected word.
dan46n2 said:
FWIW, I've been running swype beta on GSB and on FroShedYo's, xtr's, etc.. and the only bug that I've found that's consistant (to me) is that after you reboot, you have to long-press a text field to change input method back to the regular keyboard and back to swype before it will work...Otherwise, it works great for me again until I reboot.
Click to expand...
Click to collapse
Thank you for that tip!! Mine had quit working but I tried that and now it works again. Awesome man
Thank you everyone for the help. I did a Google search and found what I was looking for...thanks again!
Sent from my ERIS GSBv2.1 using XDA App
Just in case anyone hasn't seen this yet
http://rootzwiki.com/_/articles/download-android-market-update-3311-r94
That's where I read about it.(someone mentioned it in another thread also...sorry can't remember your name...ill edit if u reply )
Here is a direct download link also found at bottom of the rootzwiki article http://lts.cr/BDW_
I just installed it and so far it looks great. They have finally brought back the "top NEW free" and "top NEW paid" sections for those that.miss that. I know I did.
some new settings options and nice UI tweaks.
I haven't made any purchase/download yet though. Will updated this post when I do.
Hopefully google got it right this time
If you do this I would recommend making a copy of your current vending.apk in case you want to go back. I just used root explorer and copied the apk to my sdcard and installed the new market after that as normal.
Have fun
::::::UPDATE::::::
For all those who are cautious
I have successfully bought apps, updated apps, downloaded new apps, and also downloaded apps I had previously bought but hadn't had installed.
Also when you look at an app it shows you how many of each different star ratings it has.
I.e.-- 5stars:20 users
4stars:60 users
3stars:30 users
Etc..
Working smoothly all around. Much better than 3.1.5 or 3.1.3 imho
thanks man, will be uploading now!!!
I'm loving the new market. It's very polished now. The icons are now sized properly on the screen.
thx im loving the auto update
I upgraded last night and am still running into compatibility issues with certain apps ... ended up going back to trusty 2.3.6.
Is there anyone running build.prop edits (in particular, enhanced screen resolution) who has been able to get this version of the market working without any restrictions?
Pj
Phoenix, AZ
Yeah finally there is no lag when switching between the screens. But it's NOT faster than the old version. :/
Sent from my HTC Legend using XDA App
pdinphx said:
I upgraded last night and am still running into compatibility issues with certain apps ... ended up going back to trusty 2.3.6.
Is there anyone running build.prop edits (in particular, enhanced screen resolution) who has been able to get this version of the market working without any restrictions?
Pj
Phoenix, AZ
Click to expand...
Click to collapse
I don't really mess wit build.prop other than vm heap, max window events, wifi scan interval.
and I have not once ever had a compatibility issue.
Did you send feedback about that to google?
They might have something you can do or may work on it for future market versions