Sorry for annoying every one here. The problem with phone is this.
I have a O2 XDA Mini S which I recently bought. The person I bought it off had removed the O2 stuff with some other ROM. There was a few niggly problems mainly the symbol keys were assigned to the wrong keys etc.
I followed a link on the O2 website which said it was an upgrade. I installed this and it appears to actually have "downgraded" the phone. Now my phone once again has all the O2 branded stuff, I'm not an O2 customer. I'm on Meteor in Ireland.
I've tried downloading almost every file I could find related to this. New ROMs etc but once I try to install them the screen goes RGB and I get Error 300 invalid update tool
As I said I've try almost all links I can find to rectify this with no joy.
Could some very nice person out there, talk me through the steps to get my phone back running with an up to date ROM?
I'd greatly appreciate it guys. I'm a total newbie at this so I hope you'll take it easy on me
you need to use shelltool.
you will find it at the top of the G4 forum.
hope this helps.
Thanks Stabloid.
I'll give that a try when I get home. Do I just run the shell tool and then install the ROM?
Hey Stabloid,
I downloaded Shelltool. Unfortunately there was no instructions with it.
From what I could figure out I put the two cab files on the xda/ wizard and installed them there. I rebooted the xda then tried running the shell tool.
I've tried it a few times. I let the program run for an hour last night and nothing happend it just kept saying "Do not disconnect..."
The other error I kept getting was "please make hard reset" followed by a list of instructions which I followed and yet still got the same results.
Can someone please help me out with this or supply full instructions for the shell tool?
Thanks.
Hi guys,
I'm having a serious issue, I recently upgraded Mysterious ROM, and I changed the page pool size to 4mb using paradise one(I didnt realize Mysterious has its owns), and the DOS window just flashed for bout 2 seconds, and I thought it successfully updated, so I restarted, and then i found out my program memory is still the same (49.95mb)... and later i found out I cannot run VoIP Settings, and I cannot install some cabs (that i used to be able to install and other people can too).. so I thought it might be the page pool thingy, and i tried to do hard reset, but all the problems are still there, so i tried to downgrade (Prophet_PV_Temp) so i could reflash it again, then I could not downgrade, the utility keeps on telling me
ERROR [224] : DEVICE NOT RESPONDING
I've tried to search everywhere, but couldnt seem to find any solution, and I've run out of way to fix it.. please help me!!! =((
Not sure did you try this...
Hold "Communication Button" only and press reset button.
The screen will show the image of red-green-blue-etc. tabs.
Then connect your Prophet in that status to the PC.
And run Prophet_PV_Temp again.
If you did, I have to say sorry I can't help.
yeay!!
oh wow!!! U R the man! I didn't know that would work, thanks alot man! u saved my Neo... Respect!!!
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx