Control HD2 with unresponsive touch screen - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

I'm thinking this is impossible, but thought someone may know a solution.
I dropped my hd2 a few mths back and the screen cracked. It was fully functional up until this morning when a piece of glass was hanging out, so I pulled it off, now the touch screen wont respond, only the physical buttons.
I am looking for a way to be able to use the handset with a pc so I can do back ups of data etc..
Anyone got any ideas?
My first thought was the wifi access tool which lets you get full control of the unti via wifi, but I cannot run it.
Catch 22 situation.
Any help appreciated. Thanks.

i think its possible with mymobiler.
connect your phone via usb (active sync) and it should work...
but i'm not sure if you have to accept the installation on your phone..wouldn't be nice to you
DN41

DN41 said:
i think its possible with mymobiler.
connect your phone via usb (active sync) and it should work...
but i'm not sure if you have to accept the installation on your phone..wouldn't be nice to you
DN41
Click to expand...
Click to collapse
I'll give that a go later (cant download it in work ), hopefully no acceptance is required on the handset.
Thanks for you help

no problem mate.
maybe this could help you: broken-screen-thread
DN41

DN41 said:
no problem mate.
maybe this could help you: broken-screen-thread
DN41
Click to expand...
Click to collapse
I'm an active member of that thread and have been since April
Thanks
Off to HTC it is for my HD2

lol =)
DN41

Related

Com1 is DEAD

hi all,
the problem is the following: my COM1 port is completely dead. no application can initialize it. no application is running in the backgorund. the other COM ports, USB, IR, etc work fine. i didn't do any updates, it just went dead, one morning i wasn't able to connect to my GPS anymore. i already did a hardreset, it didn't help. anyone any ideas? thx in advance!!
Not sure what to say, sounds like a hardware issue to me. Return it for warranty repairs, I'd say...
Wasn't there a hint to turn of the irda to get the COM-Interfaces working?
Just try it. You can't loose anything....
Start->Settings->networks-irda.....
XDA developer Peter Poelman said:
Not sure what to say, sounds like a hardware issue to me. Return it for warranty repairs, I'd say...
Click to expand...
Click to collapse
yeah that's what i did.
LumpiStefan said:
Wasn't there a hint to turn of the irda to get the COM-Interfaces working?
Just try it. You can't loose anything....
Start->Settings->networks-irda.....
Click to expand...
Click to collapse
the support also told me this, but the IR was alerady off. however, i started and then canceled IR, didn't help.
thanks for your responses anyway!

Comm Manager and Phone messed up after AKU 3.3

For some reason my 8525 does not work with any rom with AKU 3.3, when I try to enter the comm manager it gives me that wait sign, and when it goes away nothing happens. Also the phone always says no service, and it does not even recognize when I don't have a sim card in. But the biggest problem is when I downgraded back to my old rom my Wlan does not work. No matter how i try and turn it on it does not start. If I try to start it in comm manager, i get that wait sign, and when it goes away the wlan is still off, the keyboard shortcut doesnt work either. I have reflashed the phone many times, and that hasnt fixed the wlan problem. BTW i flash from an sd micro card because I have windows vista and the regular upgrade method doesnt work on it.
Is there anybody that could please help me, it is out of warranty because I bought it on ebay, and I don't have the money to go about buying another one or repairing it (do they even repair pocket pcs these days?)
I toook the battery out and smelled the inside of the 8525, I think it smelled kinda funny, is it possible for the wlan chip to burn out?
btw, i will be willing to reward the person who helps me fix my pda (don't expect too much, im broke, probably $20 through paypal)
The first thing you need to do is flash to original ROM using XP and a USB cable.
wpbear said:
The first thing you need to do is flash to original ROM using XP and a USB cable.
Click to expand...
Click to collapse
Just asking, but would that be any different from getting the .nbh file from the original rom and flashing from SD, or does something different happen that could be causing my problem?
cjchriscj said:
I toook the battery out and smelled the inside of the 8525, I think it smelled kinda funny, is it possible for the wlan chip to burn out?
Click to expand...
Click to collapse
So just out of curiosity, what made you smell your Hermes? Because I tend to smell things, and I wondered if it was just the urge to smell it, or if you anticipated the burning-electronics smell...
cjchriscj said:
Just asking, but would that be any different from getting the .nbh file from the original rom and flashing from SD, or does something different happen that could be causing my problem?
Click to expand...
Click to collapse
I wouldnt trust flashing in two ways:
1. Retractable usb cable
2. SD card
You never know what can go wrong. Use XP and a REAL USB cable. If you still have a problem, very possibly you still will, but at least we can mark that off the list.
richy240 said:
So just out of curiosity, what made you smell your Hermes? Because I tend to smell things, and I wondered if it was just the urge to smell it, or if you anticipated the burning-electronics smell...
Click to expand...
Click to collapse
lol, I dont' usually smell things just out of the blue, I thought that I was going to smell burning electronics
wpbear said:
I wouldnt trust flashing in two ways:
1. Retractable usb cable
2. SD card
You never know what can go wrong. Use XP and a REAL USB cable. If you still have a problem, very possibly you still will, but at least we can mark that off the list.
Click to expand...
Click to collapse
would using Virtual PC to run an image of XP on Vista be adequate?
cjchriscj said:
would using Virtual PC to run an image of XP on Vista be adequate?
Click to expand...
Click to collapse
I never used virtual PC before, I dual boot.
hypothetically, If I flashed to the original rom using XP and the wlan still didn't work what would I do next? Also i just realized that my pda is hotter than normal, and sometimes when i plyg it in the amber light blinks instead of being solid.
LOL. I hope you have a warranty.
I dont know, if your WLAN wont even power on after a SUCCESSFUL flash of a confirmed good ROM (the original ROM) then you sound screwed to me.
wpbear said:
LOL. I hope you have a warranty.
I dont know, if your WLAN wont even power on after a SUCCESSFUL flash of a confirmed good ROM (the original ROM) then you sound screwed to me.
Click to expand...
Click to collapse
That's not good, I don't have a warranty.
Well anyone have any info about the AKU 3.3 and phone module problem? I think it might have something to do with the radio
@cjchriscj
I think you already know you have an issue. Base on this thread and your responses, it sounds like you have a feeling things are not right. Most of the time when you feel that way, you are usually correct.
cjchriscj said:
That's not good, I don't have a warranty.
Well anyone have any info about the AKU 3.3 and phone module problem? I think it might have something to do with the radio
Click to expand...
Click to collapse
Maybe but the WLAN is not a Radio ROM issue.
wpbear said:
Maybe but the WLAN is not a Radio ROM issue.
Click to expand...
Click to collapse
yea, I kinda assumed that, but my 8525 has many problems, I posted about another problem that I have where I can't use the onboard microphone for voice calls, only note recording, and the wired headset's mic doesnt work either. The only way that I can use my 8525 as a phone is with a bluetooth headset which I fortunatley have. But, I'm over that problem. I need help with the AKU 3.3 roms messing up the phone radio
cjchriscj said:
yea, I kinda assumed that, but my 8525 has many problems, I posted about another problem that I have where I can't use the onboard microphone for voice calls, only note recording, and the wired headset's mic doesnt work either. The only way that I can use my 8525 as a phone is with a bluetooth headset which I fortunatley have. But, I'm over that problem. I need help with the AKU 3.3 roms messing up the phone radio
Click to expand...
Click to collapse
you need to go back the shipped original ROM since we know that ROM works. AKU 3.3 is TEST so it is not good to use it as a hardware diagnostic tool.
wpbear said:
you need to go back the shipped original ROM since we know that ROM works. AKU 3.3 is TEST so it is not good to use it as a hardware diagnostic tool.
Click to expand...
Click to collapse
whoa, thats news to me, I thought cingular officially released the new rom
Is there any sort of diagnostic tool for the hermes? I remember when i had my Ipaq Hx2415 it had a self diagnostic tool that would check all the functions (wifi, bluetooth, sound, touchscreen, buttons, etc). It would be great to see if something is really wrong with my wifi
OK now i think that the wifi is running but the pda doesnt know it. The battery is draining faster than normal and also it runs very hot. I put it to charge and when i came back it was blinkin amber and almost dead (yes, it was plugged in)

Atom's Wifi module only functioning after storage in the fridge! Is there a solution?

Dear Xda Experts!
My name is Guy, I own an Xda Atom and I critically need your help...
About a month ago my life became miserable as the wifi module of the poor device has stopped functioning completely: It doesn't start when I click Menu->Turn on Wifi, doesn't respond to wireless manager clicks, fails the self diagnostics test etc.
After looking all over the relevant internet forums, I've found This post, suggesting I put the atom in the fridge for a few minutes. I've done that - and suprisingly - the wifi began functioning for a few minutes time. After that, it returned to its normal state of misfunctioning.
I understand that the problem is being caused by some sort of a heating problem within the device.
Is there a solution to this problem?
Rom experts (especially Jiggs) : is there a registry edit that might help, maybe to take some pressure of the processor, or to prevent the disappearance of the wifi as the device heats?
I bought the Atom especially because the wifi ability, as it is highly important to me, and as for now I'm seriously disappointed. The O2's support's laconic response was "Try the official ROM" (My warranty period is over).
Needless to say, I have already tried Hard resets, Rom upgrades of all kinds, flashing and reflashing, taking out the battery for a few days and nothing worked.
Please try to assist,
Your help will be much appreciated.
Thank you all,
Guy Sando.
Same with me.
Hi Guy,
I have the same problem with my Atom.
I tried to reinstall ROMs/Hard Reset and nothing helped.
One day in the morning after charging it all over the night, the WIFI suddenly started to work, but only for few hours.
Hope someone would have an idea.
Yaniv.
Do not used wireless manager or the wrlsmgr. try using Wifi Utilty by ALE**** i forget
Bye try to flash with the AKU 3.3.3 or AKU3.3F
http://forum.xda-developers.com/showthread.php?t=329181
jeffkewin said:
Do not used wireless manager or the wrlsmgr. try using Wifi Utilty by ALE**** i forget
Bye try to flash with the AKU 3.3.3 or AKU3.3F
http://forum.xda-developers.com/showthread.php?t=329181
Click to expand...
Click to collapse
Dear Jeffkewin, thanx for the response.
Do you have a link or maybe a bit more specific name of the software that you recommended? (Btw, Software replacement seems a bit like a long shot, because of the fact that the "fridge-therapy" works for the wifi...)
As for the AKU's - I've tried them both, they're really nice, but none of them has fixed my wifi issue...
Maybe The upcoming WM6 Rom will. I keep my fingers crossed...
Thanks again,
Guy.
Can u goto the Settings, Connections, use the Wi-fi Utility.
Ignore the Turn on and off button. Turn on is turn off, turn on is turn on.. that the only text bugs, but the software is working fine.
Try SPB phone suite wireless icon
it happened to me one time while trying to reflashed ROM. When im going to Wireless Manager, I cant open my wifi. But if im trying to open it in SPB Phone suite , its working...maybe try this software. download it and i will give to you the serial for registration. But first try if it is work then thats the time i will give to you...
jeffkewin said:
Can u goto the Settings, Connections, use the Wi-fi Utility.
Ignore the Turn on and off button. Turn on is turn off, turn on is turn on.. that the only text bugs, but the software is working fine.
Click to expand...
Click to collapse
generalriden said:
it happened to me one time while trying to reflashed ROM. When im going to Wireless Manager, I cant open my wifi. But if im trying to open it in SPB Phone suite , its working...maybe try this software. download it and i will give to you the serial for registration. But first try if it is work then thats the time i will give to you...
Click to expand...
Click to collapse
Thank you Jeffkewin and Generalriden,
Unfortunately, The solutions you proposed are not working. I have tried Phonesuite, Hitch-hiker and many more - none have worked.
I have also tried ignoring the text in the "Wifi utilities" application (In many different Rom versions) - still no good...
Has someone encountered the same problem and got it solved? Is there something about the Rom version that can fix this?
Thanks again,
Guy.
If you're using the official ROM and it's not working, then this is more hardware related. 'Fridge Theraphy' is not normal for your device. You have no choice but to go to service center, have it estimated for cost. You can buy now a brand new Atom at $250 or less.
Alternate solution would be a $50-$100 SDIO wifi card, but I think none would fit the miniSD slot.
There are miniSDIO wifis. They're pretty much the only miniSDIO devices. However, you're still better off getting a new device.
Sounds like your wifi module's overheating. This is a hardware problem (just like cracking speakers) and there's no way to fix it permanently short of a physical repair.
Good News
I had the same problem.
I tried almost every single possible solution which was discussed on this forum, including the Fridge Therapy. Fridge therapy really worked for a couple of minutes.
Finally, I took it to the service center and they said, the problem is with the board and the cost of repair is $400/-.
I was put off and challenged to see, something which works after the fridge therapy will stop working at room temperature.
Finally, I realized, the last thing beyond the ROM which I changed was the MS Active Sync. I had using Active Sync Ver 4.5. It seems to have some conflict. I reverted back to Active Sync Ver. 4.1 and reflased the original rom.
It worked and Active Sync Ver. 4.1 is working perfectly fine for my device. After the WiFi worked, I reflashed it to Jiggs latest WM6 ROM and its working well.
Might sound wiered, but the fact, I could resolve this issue by reverting back to Active Sync. 4.1.
Hope this helps to all dissappointed users of Atom.
Regards,
Anand
Anand Bhargava said:
I had the same problem.
I tried almost every single possible solution which was discussed on this forum, including the Fridge Therapy. Fridge therapy really worked for a couple of minutes.
Finally, I took it to the service center and they said, the problem is with the board and the cost of repair is $400/-.
I was put off and challenged to see, something which works after the fridge therapy will stop working at room temperature.
Finally, I realized, the last thing beyond the ROM which I changed was the MS Active Sync. I had using Active Sync Ver 4.5. It seems to have some conflict. I reverted back to Active Sync Ver. 4.1 and reflased the original rom.
It worked and Active Sync Ver. 4.1 is working perfectly fine for my device. After the WiFi worked, I reflashed it to Jiggs latest WM6 ROM and its working well.
Might sound wiered, but the fact, I could resolve this issue by reverting back to Active Sync. 4.1.
Hope this helps to all dissappointed users of Atom.
Regards,
Anand
Click to expand...
Click to collapse
Dear Anand,
Thank you very much for your help.
I'm anxious to see if that's gonna work for me as well.
I'll try going back to AS 4.1 right now and will let you know.
Keep your fingers crossed for me!
Many thanks again!
Guy.
I'm happy for you mate, but that just sounds like the biggest load of bollocks I've ever heard it just proves how unpredictible and unreliable our Atoms are, my Wifi has also gone on the blink for one or two weeks at a time and then for no apparent reason it fixes itself. Although I suppose running the Atom Exec rom in the Atom doesnt help nor the fact we run overclock apps to 624MHZ
I have now finished downgrading to AS 4.1 and to the official ROM.
Unfortunately, that did not do the trick. Thinking about it, seems like Homer is right:
The AS doesn't start communicating with the device until its connected to the desktop, after the HR and the SR that follow the ROM upgrade. therefore, there's no obvious reason why it should affect the wifi module, which seems to be off even before that connection. In addition - Anand, how did you get the AS 4.1 to work with the WM6 ROM? Isn't AS 4.5 the only version that works with WM6?
As been said, our devices are totally unpredictable, which is really disappointing. I'm happy for you, for getting everything running, and I hope that my device will do that as well soon.
I'll be more than glad if someone here will be able to assist in that matter.
Thank you all,
Guy.
guysando said:
I have now finished downgrading to AS 4.1 and to the official ROM.
Unfortunately, that did not do the trick. Thinking about it, seems like Homer is right:
The AS doesn't start communicating with the device until its connected to the desktop, after the HR and the SR that follow the ROM upgrade. therefore, there's no obvious reason why it should affect the wifi module, which seems to be off even before that connection. In addition - Anand, how did you get the AS 4.1 to work with the WM6 ROM? Isn't AS 4.5 the only version that works with WM6?
As been said, our devices are totally unpredictable, which is really disappointing. I'm happy for you, for getting everything running, and I hope that my device will do that as well soon.
I'll be more than glad if someone here will be able to assist in that matter.
Thank you all,
Guy.
Click to expand...
Click to collapse
i think guys,IMHO, if the problem doesnt have a solution, change mobile and get the better one. So far, my atom pure is working great so i can wait to buy an iphone ;-)
guysando said:
I have now finished downgrading to AS 4.1 and to the official ROM.
Unfortunately, that did not do the trick. Thinking about it, seems like Homer is right:
The AS doesn't start communicating with the device until its connected to the desktop, after the HR and the SR that follow the ROM upgrade. therefore, there's no obvious reason why it should affect the wifi module, which seems to be off even before that connection. In addition - Anand, how did you get the AS 4.1 to work with the WM6 ROM? Isn't AS 4.5 the only version that works with WM6?
As been said, our devices are totally unpredictable, which is really disappointing. I'm happy for you, for getting everything running, and I hope that my device will do that as well soon.
I'll be more than glad if someone here will be able to assist in that matter.
Thank you all,
Guy.
Click to expand...
Click to collapse
I have not yet syncronized my device with WM6 and AS 4.1. I just used it to reflash the Atom.
Also, I have heard, of AS to have an impact on WiFi Connectivity in the past.
Mine is still working fine. Infact, WiFi with WM6 is working much better than WM5.
Also, another thing which my help to have a logical conclusion is the fact, that when I used to sync with my laptop's WiFi on, my PDA's WiFi used to dissappear and when the Laptop's WiFi was off, it used to work well.
To be honest, I tried many things, starting flashing the first Atom update to the cooked roms, with AS downgrade. I wanted to share my experience, was quite excited that it may help many other like me.
Feel sorry for you :-(
Regards,
Anand
WIFI mulfunction
It sounds completly reasonable - a sofware conflict.
I have the same the problem.
However, one morning after recharging my ATOM for a complete night, the WIFI module suddenly worked in the morning till I......used the active sync 4.5 to synchronize it.
I will try to reinstall the 4.1 version and see how it works for me.
Yaniv

[Q] Ideas on how to root Telechips TCC8925 with no USB OTG

I purchased an Enco B046 Android-powered head unit for my car, and there are some things I'd love to be able to fix, if I could somehow acquire root access. Most importantly, the GPS functionality. Here's what I know about it:
1. It's a Telechips TCC8925
2. It only has one USB port (Female-A), and it appears to be Host-only. Hooking up a Male-A to Male-A cable between it and a PC, the PC doesn't detect anything on the other end. Hooking up an OTG cable between it and another Android device, the Enco B046 tries to mount the other Android as mass storage..
3. It's running ICS (4.0.4)
4. There's no pinout on the board for another USB port, nor any other pins that are giving +5vdc
5. It does have an SD slot and a card in it. It mounts and works fine.
It's relatively similar in size and form to this:
http://www.slatedroid.com/topic/36988-cx-01-cortex-a5/
Since I can't connect to it via USB and control it with ADB, that eliminates all of the ways to root the device that I have come across.
The most important thing that I need to do is to update the framework.jar, as it suffers from an incorrect GetSpeed function that throws off pretty much every GPS application. It's calculating my land speed at 1.852% of the actual speed. I have fixed the error, and repackaged the framework.jar, but to updated it, alas, I need root access.
It's a shot in the dark, but without some sort of physical connectivity, I'm at a loss. Does anyone have any ideas how I might acquire root on this thing, via software only? Or other ideas as to how I might be able to connect to it?
Thanks!
After further examination, the board has one button on it. If I hold it down during bootup, it goes to a black screen, but a red LED light stays on solid on the board. Generally, that light flashes. I'm wondering if that button doesn't enable FWDN, or Fastboot mode. Maybe that's the ticket.
Hi my friend! Any news?
mpaulonic said:
Hi my friend! Any news?
Click to expand...
Click to collapse
No news yet. I do think I've figured out how to get into FWDN mode, so I should be able to take a complete backup of the NAND, etc. That doesn't do me a whole lot of good, though, since I don't think you can inject something into an FWDN image.
I suppose I could try to recompile it completely from source, but I'm not sure what all drivers are compiled into the current system, and have no experience doing anything of that nature with Android before.
I wish there were a magic "root" apk I could install, and be done with it!
derpderpy said:
No news yet. I do think I've figured out how to get into FWDN mode, so I should be able to take a complete backup of the NAND, etc. That doesn't do me a whole lot of good, though, since I don't think you can inject something into an FWDN image.
I suppose I could try to recompile it completely from source, but I'm not sure what all drivers are compiled into the current system, and have no experience doing anything of that nature with Android before.
I wish there were a magic "root" apk I could install, and be done with it!
Click to expand...
Click to collapse
As usual if we push hard enough and make enough noise on the forums we'll get there, if Charles has to refund every paypal customer because the GPS is crap....he'll find a way to get us root, it's as simple as that
Found this, I don't know if it can help but perhaps the guys who are playing with it can help you....
http://www.cnx-software.com/tag/telechips/
I think the button on the board may actually put it into FWDN mode, but the USB port configuration doesn't seem to allow the board to act in Device-Mode in any way. If you power it on while holding down the button, it seems to do something. The screen shows "NO SIGNAL" which is what would happen if it goes into FWDN mode. But, I can't get anything to communicate with it. It doesn't show up in device manager at all, on multiple PCs.
Looks like for now, our only hope is for someone to create an APK that somehow magically roots the thing. I'll go ahead and hold my breath.
Also Searching
I am also searching for an answer to this one as i have the same issue.
Got it! follow this link and use the package and instructions provided
http://goo.gl/uAJvg
Booyeah!
Yeah, but does it work on our 8925 ? It is said t work on earlier models but not on this one....
Did you test it ?
Thanks
jchuillier said:
Yeah, but does it work on our 8925 ? It is said t work on earlier models but not on this one....
Did you test it ?
Thanks
Click to expand...
Click to collapse
Sure did just rooted my car stereo... had to update the Superuser app and a few others...... next task is to figure out what tweaks to build.prop i need to get all apps in play store.... especially the google apps.
FYI - after applying the update the screen flickered on the boot up. I reset the device (power cycled via the reset button) and then powered it back on and all is good!
I may be able to post some screen shots in a little bit if you like.....
Car stereo..... as in Enco B046 ?
Screenshots.......Enjoy
jchuillier said:
Car stereo..... as in Enco B046 ?
Click to expand...
Click to collapse
This is the one I bought.....
http://goo.gl/fvfyq
attached is a picture of the Android Board inside the device.
WHOA!!! That bad boy is $800 now I only payed $378 shipped
For which car was it ? Because 800 is a bit expensive, we're at 450-500 for a BMW unit, look at www.szenco.com
Thanks a lot for the link anyway, I'll try that tonight....
---------- Post added at 05:04 PM ---------- Previous post was at 05:01 PM ----------
Well, because of you it can be rooted now so the price went up the ceiling
I bought it to use in a 2005 Ford F-150
If you can pay for the gas you can pay 800 for the stereo
jchuillier said:
If you can pay for the gas you can pay 800 for the stereo
Click to expand...
Click to collapse
I don't have to... I already have mine
swjpilot said:
Sure did just rooted my car stereo... had to update the Superuser app and a few others...... next task is to figure out what tweaks to build.prop i need to get all apps in play store.... especially the google apps.
FYI - after applying the update the screen flickered on the boot up. I reset the device (power cycled via the reset button) and then powered it back on and all is good!
I may be able to post some screen shots in a little bit if you like.....
Click to expand...
Click to collapse
This is awesome, thank you very much! Going to try it tonight.
Any luck with build.prop?
Have you guys experienced of the following problems(before rooting)?
-SD Card error message(not related to external microsd)
-Some apps installs but then give a "no sd card present" error
-Google Nav: works for a short while then all you get is "searching for GPS"

[Q] Bluetooth connection issue with MegaFire

I'm having Bluetooth connectivity issues, specifically with my car (Volvo XC60, Bluetooth 04.23_R). For the last 2 or 3 weeks I've been using MegaFireMj2V6. Bluetooth was fine with other devices but the car wouldn't connect, always bringing up the "Unfortunately Bluetooth Share has stopped" error. Yesterday I upgraded to MegaFireMj2V7X, and now I'm having issues with connecting other devices as well, in other words the problem is now even worse.
I'm new to ROMs and flashing. Is it possible to replace and audition alternative Bluetooth elements in the hope of fixing the problem? Failing that I'll have no choice but to try another ROM entirely. That would be a shame because I'm enjoying MegaFire. But Bluetooth connection between my phone and car is essential. I'm not a power user, I just need a simple ROM, preferably no bloatware but definitely good, reliable bluetooth. Any recomendations, please?
You can replace your Bluetooth now..
Frezi Evan said:
You can replace your Bluetooth now..
Click to expand...
Click to collapse
Could you be more specific?
I've researched and have found that the Bluetooth stack, "Bluetooth Share", can be replaced. I've tried out three backups of my own, created by Titanium Backup in recent weeks, but unfortunately, this hasn't solved my Bluetooth issue. I have Bluetooth Share v 4.2.2. Is that the only version available, or can anyone let me know where I can find and audition alternatives? Failing that, I'll be re-flashing MegaFireMj2V7X later today and keeping my fingers crossed that that does the trick (although I don't think it will!).
trurl3 said:
Could you be more specific?
Click to expand...
Click to collapse
Yes. I can..
Thanks, Turl3. Reinstalling MegaFireMj2V7X repaired Bluetooth, but I'm left with the issue that I can't run two devices at once. I want to connect to both my Sony Smartwatch2 and my car at the same time. I've posted in the Q&A forum to see if anyone can help.
Frezi Evan said:
Yes. I can..
Click to expand...
Click to collapse
So? Lets go with it...
AidanBell said:
Thanks, Turl3. Reinstalling MegaFireMj2V7X repaired Bluetooth, but I'm left with the issue that I can't run two devices at once. I want to connect to both my Sony Smartwatch2 and my car at the same time. I've posted in the Q&A forum to see if anyone can help.
Click to expand...
Click to collapse
Hmm.. at least you can connect to one device.... it's kind of progress.. . Sorry, I can'ot advice nothing more...
trurl3 said:
So? Lets go with it...
.
Click to expand...
Click to collapse
OKay. thanks
trurl3 said:
Hmm.. at least you can connect to one device.... it's kind of progress.. . Sorry, I can'ot advice nothing more...
Click to expand...
Click to collapse
Thanks.
Bluetooth is weird! It wouldn't connect ... it wouldn't connect ... But then today, without my doing anything at all, I got into the car and all of a sudden both devices are connecting perfectly!! And it's been like that all afternoon. I'm not going to touch any settings on any device, and hopefully things will stay as they are
AidanBell said:
Thanks.
Bluetooth is weird! It wouldn't connect ... it wouldn't connect ... But then today, without my doing anything at all, I got into the car and all of a sudden both devices are connecting perfectly!! And it's been like that all afternoon. I'm not going to touch any settings on any device, and hopefully things will stay as they are
Click to expand...
Click to collapse
Thanks GOD...
I will hope it will stay many days..
I think it was some technical problem..
Frezi Evan said:
Thanks GOD...
I will hope it will stay many days..
I think it was some technical problem..
Click to expand...
Click to collapse
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
AidanBell said:
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
Click to expand...
Click to collapse
:good:
AidanBell said:
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
Click to expand...
Click to collapse
ok Thanks..

Categories

Resources