Hey guys, i've got a rooted x10i (024)
I've also got the 026 firmware WITHOUT root...
I overwrited the 024 fw with the 026 fw in the root folder on my pc (step1 of 2)
The i started the step1.bat
- done -
I've got the 026 without root on my phone....
Step 2
It says i have to connect in usb debugging mode...
Usb debugging checked, connected
Then it says i have to klick on the 6th button on the phone (update from sd....)
But my phone doesn't show up the screen with those buttons...
Can some1 help me pls?
I'm going to add the pics later... i can't go to my pc for now
Sry i'm from austria, 13 years old and not so good in english ^^
Sent from my rooted X10i using XDA App
Try the exploid method, easy way to root.
Sent from my X10i using XDA App
PoTi_96 said:
Hey guys, i've got a rooted x10i (024)
I've also got the 026 firmware WITHOUT root...
I overwrited the 024 fw with the 026 fw in the root folder on my pc (step1 of 2)
The i started the step1.bat
- done -
I've got the 026 without root on my phone....
Step 2
It says i have to connect in usb debugging mode...
Usb debugging checked, connected
Then it says i have to klick on the 6th button on the phone (update from sd....)
But my phone doesn't show up the screen with those buttons...
Can some1 help me pls?
I'm going to add the pics later... i can't go to my pc for now
Sry i'm from austria, 13 years old and not so good in english ^^
Sent from my rooted X10i using XDA App
Click to expand...
Click to collapse
off course it will not work.
In step 1 folder there is no 024 firmware but 016, which have fota debug entry allowed (all latest have it disabled).
that explains why the screen not shows up on your phone.
in step 1 of root, you are actually doing a downgrade of your firmware from any to the 016. After in step two where root hapens you are upgrading to the 024 fw (thanks to file fota.pkg).
there are many solutions in thread here.
allowing fota.pkg in latest firmwares.
make 024 root and update to 026 by jeprelea.
use exploit to root 026 fw
or the easiest method via root apk where you will just simply push the root button
Oh thx ^^
Can u post the link or the file here pls, i can't find it...
#edit: found
Sent from my rooted x10i using XDA App
Related
Has anyone successfully debranded using the usual tutorials anymore?
Nope, the quick swap method on seus didn't work anymore.
You can try looking at this thread though. It's a bit less simple, but it does the trick.
http://forum.xda-developers.com/showthread.php?t=683793
I used the method @Gentimp referred to in the link and it worked first time, hook up your phone and press any key on the command it will install a 026 generic version on your phone, simple
vengeance
the old method worked fine for me. I debranded last week using it, although took 7 tries.
yeah last week it still worked, but now it wont. there was a little update on the SEUS, i think this prevented us from debranding
you can use this method to debrand too :
http://forum.xda-developers.com/showthread.php?t=711907
Check the X10i mini section, there is another method to debrand your X10.
I tried it today and success.
I cannot post the link here because the owner doesn't want to share it anywhere
dundun1701 said:
Check the X10i mini section, there is another method to debrand your X10.
I tried it today and success.
I cannot post the link here because the owner doesn't want to share it anywhere
Click to expand...
Click to collapse
If its posted on an internet forum its public knowledge. Link it up. Link to the thread, not the creators tools or whatever directly.
Use this metode:
1. Download the firmware you want
2. Use SEUS or PC COMP to update your phone
3. Go to Program filles /sony ericsson and replace those 2files with the one that u download at step 1... dont forget to rename the filles
4. Now run again SEUS or PC C... it will say taht u are up to date so u need to give repair
Job done
Sent from my X10i using XDA App
Use this method by Grospolina. I did it yesterday and took me like 5 minutes. Just apply step 1 if you just want to debrand and the rest for root and market access. I think its the easiest.
These are the steps I did:
http://forum.xda-developers.com/showthread.php?p=7490733#post7490733
1)Download for your model X10a or X10i
2)Run RootX10a_v2.cmd
3)Select option 1 (A message appears, don't click just yet)
4)Connect your phone in flash mode (turn off, wait 30secs, press back while connecting the usb cable)
5)When the green led light appears on your phone quickly hit a key and the process starts
6)Let it finish and Bingo!! You got Generic LAM R2BA026
If you want to root and market access select the other options. (I used the Stand alone root on another post and installed market access)
hramos20 said:
Use this method by Grospolina. I did it yesterday and took me like 5 minutes. Just apply step 1 if you just want to debrand and the rest for root and market access. I think its the easiest.
These are the steps I did:
http://forum.xda-developers.com/showthread.php?p=7490733#post7490733
1)Download for your model X10a or X10i
2)Run RootX10a_v2.cmd
3)Select option 1 (A message appears, don't click just yet)
4)Connect your phone in flash mode (turn off, wait 30secs, press back while connecting the usb cable)
5)When the green led light appears on your phone quickly hit a key and the process starts
6)Let it finish and Bingo!! You got Generic LAM R2BA026
If you want to root and market access select the other options. (I used the Stand alone root on another post and installed market access)
Click to expand...
Click to collapse
I tried this today works perfect! fixed my brother's X10 it was bricked with explanation mark!
just to add he needs to write his device ID in Device ID.txt before running Root10a_v2cmd
I've tried z4root, after it reboot, still not rooted.
Superoneclick didn't work, it pushed rageagainstthecage then it just loops and didn't work, any idea?
ukakit said:
I've tried z4root, after it reboot, still not rooted.
Superoneclick didn't work, it pushed rageagainstthecage then it just loops and didn't work, any idea?
Click to expand...
Click to collapse
Maybe this thread will be your answer :
http://forum.xda-developers.com/showthread.php?t=920746
=[ I tried pressing the root button and it says to connect your device and enable USB debugging.Which I've done.
It worked for me OK, o2 .24 firmware update, but I didn't do a factory reset when I updated via seus, maybe that is a factor?
Sent from my X10i using XDA App
I had it rooted before, it was slow so I unroot it. Later I saw an update and after the update, I couldnt root it anymore. So I reset it to factory settings and now im stuck. =[
@ukakit:
thats what happened to me too!! i rooted my x10i using z4root... and i updated it via pc companion yesterday.... and now i cant root my phone...
even after reinstalling z4root or redownloading z4root... worst of all... i realised the update did nothing at all!! except for unrooting my phone
have you found a solution?
If you are on build 2.0.A.504 then use this.
If you are on build 2.0.2.A.0.24 then use this.
I'm unable to root my X10, I do not know why! I tried with z4root, universal androot and SuperOneKlick,I even search on youtube and nothing succeeded. I don't know what to do anymore . Perhaps the thing that I have the latest software of Android OS (firmware v. - 2.1, the baseband v. - 2.0.49, build number - 2.0.2.A.0.24). I have read almost all posts on the XDA about root and still impossible. PLEASE HELP !!
batman_112 said:
If you are on build 2.0.A.504 then use this.
If you are on build 2.0.2.A.0.24 then use this.
Click to expand...
Click to collapse
Thanks, This really helped
I have the same issue, but my build number is 2.1.A.0.435
firmware is 2.1-update1
help?
Thake 1 click Root 1.55
works fine for me
educated fool said:
I have the same issue, but my build number is 2.1.A.0.435
firmware is 2.1-update1
help?
Click to expand...
Click to collapse
Had the same issue yesterday.. solved it with a little logic..
Just follow the steps..
1. You will need x10 flashtool installed on your computer.
2.open it.
3. Turn on Usb debugging mode in your x10 under applications->Development.
4. Turn your phone off and remove battery for 20 sec.
5. Put the battery in and hold back key without turning on your phone.
6. Plug the usb cable without leaving the back key. A green led light must appear.
7. Now press the root button in x10 flashtool. It will say connect your phone and enable usb debugging.
8. Disconnect your usb cable and Turn on your phone
9. Reconnect it ro computer BUT DO NOT MOUNT THE SD CARD.
10. then just press the root button again in flashtool..
11. The phone will now be rooted.
NOTE: YOU MUST HAVE ADB INTERFACE DRIVERS INSATLLED ON YOUR COMPUTER FOR YOUR PHONE
HIT THANKS BUTTON IF HELPED IN
ANYWAY..!
Sent from my awesome X10i running freex10 beta4..
greenglow theme...using XDA premium App..
kaisan1 said:
Had the same issue yesterday.. solved it with a little logic..
Just follow the steps..
1. You will need x10 flashtool installed on your computer.
2.open it.
...............
Click to expand...
Click to collapse
Greattttt. It works to me.
Many thanks kaisan.
educated fool said:
I have the same issue, but my build number is 2.1.A.0.435
firmware is 2.1-update1
help?
Click to expand...
Click to collapse
Have the same issue before;
Try this --> http://forum.xda-developers.com/showthread.php?t=803682
jufoyo said:
Greattttt. It works to me.
Many thanks kaisan.
Click to expand...
Click to collapse
My pleasure buddy..!
HIT THANKS BUTTON IF HELPED IN
ANYWAY..!
Sent from my awesome X10i running freex10 beta4..
greenglow theme...using XDA premium App..
educated fool said:
I have the same issue, but my build number is 2.1.A.0.435
firmware is 2.1-update1
help?
Click to expand...
Click to collapse
Both the .24 and .435 root with SOC 1.5.5
Hi guys good day!!! I do have a x10i with FIRMWARE 1.6, BASEBAND 1.01.14, BUILDER NO. R1FAO14 which was working perfectly fine. Until I tried to update it using SEUS which was successful (as per the software) then I restarted my phone and saw it was updated to FIRMWARE 2.1 UPDATE1, BASEBAND 2.1.54, BUILDER NO. 2.1.a.o.435. The problem was after 5-10 mins buttons no longer work and only the touch screen works. Please if anybody has a solution please let me know.
I’m thinking of two things, FIRST is reverting it back to 1.6 if possible (I don’t know how...) SECOND is to continue using the current firmware (2.1 update1) but resolving the button issue.
Thanks...
yammy35 said:
Hi guys good day!!! I do have a x10i with FIRMWARE 1.6, BASEBAND 1.01.14, BUILDER NO. R1FAO14 which was working perfectly fine. Until I tried to update it using SEUS which was successful (as per the software) then I restarted my phone and saw it was updated to FIRMWARE 2.1 UPDATE1, BASEBAND 2.1.54, BUILDER NO. 2.1.a.o.435. The problem was after 5-10 mins buttons no longer work and only the touch screen works. Please if anybody has a solution please let me know.
I’m thinking of two things, FIRST is reverting it back to 1.6 if possible (I don’t know how...) SECOND is to continue using the current firmware (2.1 update1) but resolving the button issue.
Thanks...
Click to expand...
Click to collapse
Buddy my suggestion would be to go for free x10 beta4 2.2 custom froyo rom.. its 1000 times better than stock rom..
HIT THANKS BUTTON IF HELPED IN
ANYWAY..!
Sent from my awesome X10i running freex10 beta4..
greenglow theme...using XDA premium App..
cannot root
Hi,
thanks for all your tries - it didn´t work for me so far:
I have an SE X10, Firmware 2.1-update1, Baseband 2.1.54, Kernel 2.6.29 and Build 2.1.a.0.435
I tried SOC in different Versions - no success - used Flashtool and Z4Root - no success.
My last try of Flashtool is attached - any ideas are welcome. I know - this WILL be my LAST time using SEUS to perform an update - before this, rooting worked fine.
Now it does not work anymore...
I reformatted my computer and after I couldn't get my phone to connect using debugging mode, I had to use a different computer to root it. Do you have access to a different computer? It solved my problem...Hope this helps! I have rooted every version from Sony no problem except the latest one, flashtool didn't work even with the patch, so I used superoneclick.
hey guys help me out i cant root my xperia
whenever i try to do it command prompt just gives a message " device offline "
the one click root app just hangs up when i run it
nothing is working for me please help
i put my xperia in usb debugging .......... installed PC companion my pc is detecting my phone as "adb interface " device still something is going wrong
HELLO PLEASE HELP ME SOMEONE
what firmware do you have ?, i rooted my x10i 2days ago i was on 2.1 update-1 and i used SuperOneClick1.5.5 just followed that guide... http://forum.xda-developers.com/showthread.php?t=824788
maybe you turned off your phone.. just connect the usb to the comp close SEUS and Companion and check usb debugging.. dont turn it off.. and open super one click and root.. i am not a dev but if you could better describe your steps someone will help you shure
Did you also remember to allow 3rd party apps?
Sent from my Chefens_X10i using XDA App
depending on your firmware theres a few way to root it
1.6, x10root.apk and universalandroot.apk
Just install em and root
2.1, at first there was z4root but SE patched it out, but i used superoneclick and it looped once and rooted straight away
or you could just flash your phone using Zdzihu method which installs a pre rooted 024 firmware
or use this HowTo
http://forum.xda-developers.com/showthread.php?t=920746
H,
I used the X10root app to try and root my X10.
the problem comes when it says": wifi on followed by wifi off.
I've done the steps...but it seems to be frozen right at this point...there is no further message, no indication that anything is happening.
Can someone help?
the easiest way, it takes me 1 min, no apps or anything required, download flashtool from xda to your computer, connect your usb and click root. click root on top left with flash tool, it will do things, and you phone will restart, when it restarts, you will have root access. thanks me if i helped!
flashtool: http://forum.xda-developers.com/showthread.php?t=920746
I found superoneclick to be the easiest.... z4root is easy as hell too
First time i was using Z4. Worked like a charm!
Last time i was on .435 firmware. Z4root, X10Root, Flashtool... all didn't work!
I found out that the .435 can only be rooted by suuperoneclick v1.55 or v1.63.
Before you connect (with USB debug mode on), be sure to have the SE drivers installed on your PC. Else superoneclick won't be able to find your xPeria.
Good luck!
on my .435 i used flashtool to root as well =)
I really need this done please anyone
Sent from my U20i using XDA App
use z4root one touck to root and unroot your phone (link below)
http://forum.xda-developers.com/showthread.php?t=833953
dont forget to click the thanks button
Z4root doesn't work on my x10 Mini Pro.
I've just reflashed it using SEUS, which gave me 2.1.1.A.0.6. Downloaded and installed z4root, ran it, the app did its thing, gave no error messages and...my phone still isn't rooted.
I've just done a quick bit of Googling and it looks like z4root isn't compatible with this build. As far as I can tell, there isn't anyway to root your phone, if this is the build you're on, without using a PC. Maybe it's worth trying to borrow a friend's for a few minutes? Or sneaking down to an internet cafe and hoping that they haven't disabled the USB ports..