[Q] Barnacle on wildfire - Wildfire Themes and Apps

now that we have a soft root for the wildfire, has anyone got barnacle (or any other wifi tethering app) to work? i'm trying to tether my ipad and it seems to connect to the access point, but there's no internet connection.
it seems as DHCP is not functioning correctly, the ipad doesn't get an ip for the gateway.

s3000 said:
now that we have a soft root for the wildfire, has anyone got barnacle (or any other wifi tethering app) to work? i'm trying to tether my ipad and it seems to connect to the access point, but there's no internet connection.
it seems as DHCP is not functioning correctly, the ipad doesn't get an ip for the gateway.
Click to expand...
Click to collapse
try reposting in the android dev fourm

Related

[Q] Barnacle WiFi tether from phone to A70

just received my A70, installed GApps and a few programs through the file viewer after transferring via USB.
Then, I wanted to download a few apps from the market...
I got Barnacle setup on my X10, and my laptops can both see the new WiFi network created by it, but the Archos can't
Has anyone tethered using this method before?
If so, I think I am using the wrong channel to connect, but can anyone advise which WiFi channel the A70 would require??
I can pick up other WiFi networks, but can't actually connect to them due to restrictions on the routers (I'm at work, they require MAC addresses and for some reason wont let me add this to the network )
Try any channel below 11. It's a known kernel issue.
if it creates an AD-HOC connection, then that's the issue.
Aha, yes it does. Damn
I'll have to try the proper tethering method then using the cell phone tether option (which I briefly tried but failed to connect through bluetooth)
Try "Wireless Tether for root users" with it's bluetooth option. Works for me Have the tether activated on the phone while pairing it with the Archos though.

[Q] Want to share PC DSL connection with my Vibrant. How can I do it?

Hi Guys. Need a little help.
Scenario: I have a wired ADSL connection in my home for internet. I have Windows 7 on my PC installed. I have a TP-Link TL-WN321G WiFi card in my PC as well.
Now, I want to share my PC's ADSL connection with my Vibrant through my WiFi card.
So far, I have failed to achieve it. I have tried doing it the TP-Link way by establishing a Soft AP through a software provided by them, but no success. I have tried connectify, no luck here either. My vibrant detects the network but never connects to it...
Any help, what so ever will be really appreciated...
Easiest way, get a $30 router at your local store. Will save you a headache. Otherwise bridge your wired and wireless connection using windows.
Sent from my SGH-T959 using XDA App
Well what you will need to do is allow ICS (Internet Connection Sharing) on the wired NIC card and allow other users to share the connection. It should DHCP the wired NIC and assign your wireless card an IP address like 192.168.137.1 and Subnet of 255.255.255.0.
Actually I don't want to buy a new router, want to use my WiFi card. And it is possible through it, so I think I should not spend money on a router...
I have tried everything... ICS is not working... Connectify is not working either...
There is some way of doing it through Adhoc network, I read somewhere but I have also read that Adhoc network is not supported in Android...
If someone can help, that would be great...
Odd because I'm doing ICS via Windows 7 and mine works perfectly..
***Edit...you might have to add in the default gateway ip and primary dns server ip on the wireless card for it to look for your wired NIC
just right click on your wired NIC and go to status and then details
Hmm... I am going to try this but do I share the internet with my WiFi card or the Virtual WiFi Miniport?
You share the wired NIC "allow other users to connect " it will act as your DHCP server and assign an address to your wireless card
Nothing is happening for me...
My Vibrant detects the WiFi AP but does not connect to it... It evens show the signal strength to be "Excellent" but does not connect to it...
Man... Its really frustrating when you can not get something to work...
So it just wont connect period?? Not even to network? Or will it connect and just no internet.... Hmmmmm
It just wont connect. Period...
Thanks for your willingness to help though...
Google "set up adhoc windows 7" to get your wireless set up properly, then should be easy. Keep it simple at first. Broadcast ssid and one you will recognize, and no password to eliminate any problems. Once configured and workinggo back and set up a password.
Sent from my SGH-T959 using XDA App
I have tried this Ad Hoc connection as well but I have read somewhere that Android does not support Ad Hoc connection. If there is some way around, please do tell me...
Finally... Got it working guys...
Here is the link: http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/
Followed it and it just worked...
Man, I am relieved...

Does FoxFi work when not rooted?

Hi all,
Does FoxFi work for WiFi tethering when NOT yet rooted, on Dinc 4? Anyone actually tested it? I'm between this and the S III, and tethering will be one of my uses. Since VZ locked S III I think I may get a Dinc 4.
Thanks for any inputs!
I have the Dinc4g, and have not rooted it just yet.
I have been trying to get FoxFi to work. My laptop will connect to FoxFi and receive an IP address via DHCP with no problem (using WPA password). I can successfully ping the phone while connected, but can *not* get out to the internet. I may be rooting sooner than later, as I too need to tether on occasion. In the mean time, I will be settling for a USB tether..
Edit: FoxFi does appear to work if you use the Proxy option (requires the FoxFi add-on). I was able to browse using FireFox after setting up the FireFox network settings to use the Proxy.
junkmail9 said:
I have the Dinc4g, and have not rooted it just yet.
I have been trying to get FoxFi to work. My laptop will connect to FoxFi and receive an IP address via DHCP with no problem (using WPA password). I can successfully ping the phone while connected, but can *not* get out to the internet. I may be rooting sooner than later, as I too need to tether on occasion. In the mean time, I will be settling for a USB tether..
Edit: FoxFi does appear to work if you use the Proxy option (requires the FoxFi add-on). I was able to browse using FireFox after setting up the FireFox network settings to use the Proxy.
Click to expand...
Click to collapse
Absolutely 100% same issue here, connects, grabs an IP instantly, but it cannot browse out. The proxy-add on gives me instant web access when configured, but obviously I cannot use any other services over the proxy (like RDP, Ping, VPN, etc.) It seems almost like there's a firewall or routing issue on the phone on the NAT side of things. I can ping the gateway (192.168.43.1) but cannot route beyond it.
Can't grab IP
I'm using a Motorola Atrix HD and I can't seem to get my Nexus to grab an IP from FoxFi, even with the app.
working for me right now: FoxFi Addon, Firefox set on 'no proxy'

Android VPN + Tethering

I use Android's native PPTP VPN connection to manage computers at my office or at my home if I need to do something when I'm not physically present.. If my phone is connected to the VPN however, and I tether my internet connection to my tablet, I can't seem to get access unless I make a second VPN connection from my tablet.
Does anybody know how to share VPN access to tethered devices? I'm sure its possible, just not sure how to make it happen...
possible solution see cross-link
See http://forum.xda-developers.com/showpost.php?p=33749904&postcount=10
And why are you trying to do that?
I haven't tested vpn "sharing" , but it is simple to vpn with the tethered device to the vpn server. Wifi tether passes the vpn traffic fine.
I will poke around with it sometime.
Sent from my ADR6425LVW using Tapatalk 2

[Q] Tether to my iPad

I do not have a tethering plan and I know about creating a new APN with the epc, but when I go into my Mobile Hotspot to do the tethering to my iPad, it says Error under the words Mobile Hotspot after I turn it on (I can still connect to the Internet on my phone with this error message)
My iPad can see my phones tethering connection under the WiFi connection choices and my phone shows me as being a connected User under users. I just cannot actually get on the Internet on my ipad with the Mobile Hotspot tether. I can get in the Internet still on my phone using the new APN.
Am I doing something wrong or is there another work around or way to tether FREE to my iPad using my phones Internet?
(I also tried a third party app called FoxFi and same thing happens where my iPad sees it as a connection access point but I cannot actually get on the Internet at all)
(Also what is Bluetooth Tethering?)
TIA!
Don't mess with that worthless mobile-hotspot app...
Just install WiFi Tether for Root Users from the Play Store, use the APN settings listed below, and go with it....

Categories

Resources