Related
Hello all,
I am wondering if perhaps someone knows how to stop ALL the pop-up balloon msgs in WM2003? I there is a fix to get rid of the annoying battery low pop-up, but I want them all gone. None of them are of any use to me - the title bar icons do the job just fine!
I am especially starting to hate the "can't connect to GPRS" message when I am not in an area with good reception the phone tries to automatically check my mail...
Thanks,
xnappo
there is a regestry tweak to remove that anoying battery low pop up. search around the main site not the forum and you will find it.
Yeah, I know about that one, but I would like to know if there are any registry tweak for the GPRS popups (like can't connect because I am using the phone, can't connect to check email because there is no GPRS signal - check settings etc.
Regards,
Chris
Stop GPRS connection popups
Has anyone found a way to stop the popup balloons when the device goes in and out of service or tries to connect when it is out of service?
It is annoying to try to read offline content in AvantGo or Mobile favorites and have the balloon pop-ups appear on as it tries to connect to get other content.
In addition to the popup, when my device is out of service and tries to sync my mail it also turns the device on. Since have the device set the keep the backlight on for 5 minutes it is killing my battery life when it turns on in my pocket and I don't know to turn it off.
I am using the XDA1 on T-Mobile w/ WM 2003
I've owned a Touch Pro for a few months now and overall it's a good device. It has its quirks, but then again what phone doesn't? There is one problem in particular, however, that I can't seem to figure out. I've searched up and down in XDA Forums, and on Google, and I just can't find out a fix for my data connection always turning on for no reason. I have all my e-mail accounts set to "manual send / recieve", the weather program set to "update weather manually", and as far as I know there are no other programs on my phone that have access to the internet without my permission.
The problem I have is sometimes I will wake my phone up from its sleep mode, and I will discover that the data connection is active and appearing to be transmitting. Also, EVERY time I restart my phone and it goes through the boot process, the data connection will re-activate even before TouchFLO 3D opens up on the today screen. It's really annoying, because I have no idea what's causing it to do this, or why it does it at random times, or whenever I reset my device.
Does anyone have any solutions to this problem? I hate having to manually go in periodically and make sure my data connection is set to "off", instead of having it stay that way when I set it.
So no help on this one then?
I don't have a solution but I can help by bumping your thread and saying I have the same problem on Verizon. I was at a friend's place all weekend, and he has wifi all over, so I turned off data and used his wifi instead. Well sure enough all weekend my data connection kept turning itself back on. It seemed to happen only when going into sleep mode. So I kept the phone plugged in so it would never totally "sleep". Wifi stayed connected with no data connection starting automatically. Annoying especially considering the 5 GB data limit on the PDA plan.
Well I'm glad I'm at least not alone on this one. It's weird too that even though your device is on a different carrier, it still does the same thing. I wonder if it's a hardware issue?
I know that someone has to have an answer for this...
go into pocket express and press menu then go to express settings then on the top left theres a pulldown press it and go into auto updates and turn it off.. pissed me off when i got the phone.. couldnt find a fix till i started going through all the programs to find the one doing it.. and it was the stupid Pocket Express
I have had my MDA Compact V for a few months now, and it's only recently that I've had the same problem. Each time I switch on, my data connection starts or alternatively if I loose signal then get it back then I see my data connection is on again. Thankfully I have the Solo 20 package with unlimited net usage (although you're are limited to 1Gb/month) but it drains my battery really badly.
I went through every possible setting and program to switch off location settings or auto downloads/updates and I still have the same problem, but I downloaded Data Controller v1.00 from Freewarepocketpc.net and I can toggle my data connection on or off as I please.
Heres what you need
Install below cab, then use the NODATA app, select what you want off, PHONE AS MODEM and DATA are your two options I believe... Your data will never come back on... until you re-enable it that is....
PS... THIS IS NOT MY CAB, THIS IS SOMETHING I FOUND WHEN TRYING TO ADDRESS THESAME PROBLEM YOU ARE HAVING. THIS CAB WAS DOWNLOADED FROM MoDaCo BUT I DONT HAVE THE LINK... ALL RESPECTS GO TO HIM... I AM JUST SHARING WHAT HAS WORKED FOR ME IN THE PAST...
Seems it's one or the other
What sucks is on my Sprint HTC touch pro 2 (cdma), I was having a problem where I couldn't answer calls all the time, but sometimes I could, and eventually found that it was always when the data connection was showing active is when I couldn't answer a call. But when that was happening, my data connection would turn back off after a few seconds when I was done using it. It was driving me crazy not being able to answer my calls and I finally found a post that let me correct that problem, it was changing the HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume value that fixed this problem... the value of this registry setting was originally "GPRS_bye_if_device_off". This setting made it so the data connection would turn off when not being used, but it apparently messes up cdma phones from being able to switch over to answer an incoming phone call if the data connection is active. I changed this registry entry to "#777" as the post said to do, and sure enough, that corrected the problem with being able to answer my calls if the data connection is active. I'm real happy to have that working now, but when I changed this setting, my data connection is now always showing active (white arrows showing in status) and even if I turn it off manually, it comes on by it's self way more often than the every 4 hours I have it set to check emails.
There is a registry setting called CacheTime under the same Settings key as the above mentioned registry entry that I changed, that when the "GPRS_bye_if_device_off" value is used, the CacheTime key value will indeed control how long the data connection stays on before automatically turning off. But When I change the Entry to "#777" which is necessary to allow me to answer calls when data is active, then changing the CacheTime value has no effect and the data connection stays on until you manually turn it off.
I'd like to find a way to turn the data connection off, while still not messing up me being able to answer calls when the data connection is active, and seems to me that if both of these things can be done separately with two different registry settings, that it must be possible to do both.... so if any of you tech wizards can find a way to do this, I'd love to see it!
Possible Fix?
Hey, I have noticed the same problem. It is annoying from a battery life aspect as well as a system slowdown when coming out of sleep. I could not find much of a workaround except one of the settings in TD3 Tools I installed. In the "Data Connection" tab you can yurn on an option that makes your "End" key also terminate an active data connections. So if you hit it after waking your phone you won't have the annoying slowdown with your Sense UI...
hi. i,m new to HD2 and windows mobile.
whenever i connect my HD2 to my PC via active sync the time changes to +1 hr the current time. so i have to change it back to the correct time again and again.
I live in Pakistan where daylight savings time is not in practice but still don't know why the time keeps on changing.
I am not sure but i guess it sometimes changes even without connecting to PC.
I have turned the location services OFF in the settings but still can't fix it.
any suggestions?
an update to the question.
just realized that, the time also changes to "Current Time +1hr" even when i use my GPS navigation software garminxt. as soon as i get the satillite lock the time changes.
please urgent help needed...still waiting for responce.
now ive tried many key words and phrases to search, maybe im just searching wrong or something but i cant find any fix to this yet im sure others have experienced it.
basically my data keeps turning on every 10 minutes or so after i switch it off. no programs are running, weather not set to update, youtube hasnt been set to login and neither has twitter, activesync set to usb. the only home screen tabs i have are messages, internet, photos&vid, and weather. time isnt set to update via internet. auto update of database within the data connection are turned off, auto config turned off
im on the verge of hard resetting.
not sure, but maybe WMLongLife could help to identify the culprit, as with each new connection it asks you to define connection type/access
go to settings tab / more / connections / connections / advanced / choose networks -> programs with automatic internet access use: set to "firmennetzwerk" (i guess its work network or something similar).
now your phone doesnt connect data anymore..
if you want to connect it again, you have to change that again..
DN41
b-16707 said:
now ive tried many key words and phrases to search, maybe im just searching wrong or something but i cant find any fix to this yet im sure others have experienced it.
basically my data keeps turning on every 10 minutes or so after i switch it off. no programs are running, weather not set to update, youtube hasnt been set to login and neither has twitter, activesync set to usb. the only home screen tabs i have are messages, internet, photos&vid, and weather. time isnt set to update via internet. auto update of database within the data connection are turned off, auto config turned off
im on the verge of hard resetting.
Click to expand...
Click to collapse
Did you uncheck "My Location"?
have you tried the "no data.cab" file works for me
yea ive looked into the above solutions but didnt want anything semi-permanent.
ironically i soft reset the device about 4 times within 30min and its back to normal now...go figure.
Search for dialup enablerdisabler. Install it first thing after a new Rom. Goto start find it and disable data once and for all
Sent from my HTC HD2 using XDA App
I work and live in different time zones, I noticed the atrix doesnt update the time unless I turn off the wireless and then re-enable it. Is this supposed to be normal?
settings -> Date and time
is automatic checked? how often are you on wifi, and how often on mobile data? I'm not sure it gets a constant check when on wifi.
cegna09 said:
settings -> Date and time
is automatic checked? how often are you on wifi, and how often on mobile data? I'm not sure it gets a constant check when on wifi.
Click to expand...
Click to collapse
The time is technically correct except for it is an hour less than it should be. It is set to automatic, im on wifi 20% of the day the rest mobile data. If I turn on airplane mode then turn it back off the correct time is displayed. I think they may have a bug
I travel for business quite and go between time-zones. I also find same issue happening with my new Atrix phone. If I turn the airplane mode on and off several times, time correct based on time zone I am in. Automatic date and time setting checked on.
Hi Everyone,
Atrix did not adjust automatically the time fthis morning. Is anybody else experiencing this issue?
In date and time the 'automatic' settings is checked.
I had to reboot for the time to be automatically updated.
Thank you.
Alarm went off an hour earlier than all the manually set clocks.
No glitch here. In Indiana on an eastern time zone.
I travel for work and the Atrix has worked fine for me in different time zones. My captivate failed to auto-switch one time though - so i think it has something to do with tower signals more then phone.
I reported this at launch, Im in indiana and live in CST but work in EST. This phone has not correctly changed timezones once, and didnt even update to the correct time for daylight savings time yesterday. The only way i've found to fix is either turn on/ turn off airplane mode or cycle power.