Hello,
Could you please answer the question in subject.
I have read thread: "[SCRIPT] Root v2 for 4.1.57 (Stock 1.2.6 REQUIRED)". It says it requires 1.2.6.
I went to "[GUIDE] Flash SBF to Motorola Atrix 4G " about how to falsh stock 1.2.6. Therefore it's known that flashing back unlocked atrix can cause problem with WiFi.
As all I need from rooting is to use my device as WiFi hotspot for tethering I need WiFi to work with no problems.
Additional information: I live in Ukraine and I am using local carrier services, so I will have to provide real carier's APN to make newtork working.
thanks in advance,
Alex
My friend, i also have an unlocked atrix and i installed the 1.2.6 sfb file without having problems on wifi, then i applyed the root and updated to 4.1.57!
I installed barnacle and use it to wifi tether!!
All works perfectly!!!
Sent from my MB860 using XDA App
Good afternoon all;
I've been frequenting XDA and installing custom roms on my phone now since before Christmas :3 and all the developers are amazing!
I am currently running wolf's rom with doomkernel 1133 and have an unlocked BL
My question is regarding the network connectivity with all other roms... I can connect to Rogers network just fine with wolf's and my stock firmware, and despite reading on the CM7 roms that GSM function is working... I'm still unable to connect to any network... Was wondering if anyone else ran into this problem... and if so what can I do to correct it?
Thank you for your time!
Is this not possible to correct? Am I missing something?... I would love to be able to use a CM rom or anything other than Wolf's for a change if someone could assist... Could I be missing something in the flash process?
Has anyone else had this problem?
Thanks all!
Input APN
http://forum.xda-developers.com/showthread.php?p=21485459#post21485459 try manually inputing the APN: Settings>Wireless Settings> Mobile network? meh, youll find it.
Sorry should have mentioned that the APN network settings are all there, Rogers Network is showing Im just not able to connect to it... It's appearing as though GSM/HSPA functions of the ROM aren't working...though the ROM states otherwise.
I was wondering if someone with a rogers tab could pull the rogers live tv apk and post it?
The store will not allow me to download it for my note, i want to try and install the proper apk to see if will work
Thanks in advance for your help
Sent from my SGH-I717R using XDA
AT&T custom to i717R model for rogers live
I wanted to know the same thing.
I flash the unofficial emily 1.5 rom and it went to AT&T network. I fix the APN to get LTE but I can't get Rogers Live because my model has change to i717 instead of Rogers stock i717R. How can I get the model to watch Rogers Live?
i think you need to modify build.prop file
I got myself a MediaPad S7-302u on Tesco Thailand yesterday, and the first thing I did was to update the firmware to the International ICS available on the website. New firmware is great, all is working, I might change to a "modded/tweaked" version here from XDA like I do on my Galaxy S2, former Galaxy S, gf's Galaxy 5, etc...
Little problem... apparently the version on the website is for MediaPad S7-301u. Only difference between them seems to be frequency of the 3G networks. The tablet is working beautifully, GPS, mobile data, etc, EXCEPT for 3G, in the network I use, AIS/1-2-Call. I don't have a big problem in using Edge, I do the same with my S2, to save battery, and I don't care about the reduced speed (Edge here works well, I get usually close to the 384kbps max speed), but I'd like to have the option to, eventually, one day... go to 3G. The problem is that I can't seem to find ANY firmware versions for the 302u!
Any idea where those are hiding? Tks!
Install huawei mediapad Russian version which was released on 30th May, it solved my 3G issue with my network.
Sent from my HUAWEI MediaPad using xda premium
supun said:
Install huawei mediapad Russian version which was released on 30th May, it solved my 3G issue with my network.
Sent from my HUAWEI MediaPad using xda premium
Click to expand...
Click to collapse
Thank you supun, but unfortunately it hasn't changed anything here. Still only on Edge, and no sign of 302u file on Huawei website.
LeoViotti said:
Thank you supun, but unfortunately it hasn't changed anything here. Still only on Edge, and no sign of 302u file on Huawei website.
Click to expand...
Click to collapse
I'm not sure will my post would help u on this matter or not but try no harm,
Try search this rooted OEM version and install into ur Mediapad.
HUAWEI_S7-301u_FIRMWARE_android4.0_C232B002_General_Channel_05010YBX-root.zip
* before insitall this , pls installed unrooted version.
* U also can refer to below post.
[ROM][ICS] [UNOFFICIAL] Root-ready Huawei MediaPad/SpringBoard ICS International ( 1 2 3 ... Last Page)
Originally Posted By: shiranmotha
6th June 2012 01:51 AM
by brickchamp
Interesting. The 303U is the T-Mobile Springboard which is what I have.
I have two SIM cards in Canada with different 3G-only carriers, and a 303U Springboard unlocked from T-Mobile. One carrier uses AWS 3G (same as T-Mobile) and the tablet sees the network but cannot connect to it at all. The other carrier uses 850/1900 3G and the 303U supports 1900 but not 3G, so it does get connectivity with occasional dropouts.
I was never able to connect to the AWS network before the upgrade but I didn't try very hard. After the ICS upgrade I have still been unable to get on the AWS network and I tried in-store with a SIM from another AWS network too, to no avail.
From before the upgrade, I did capture an update.zip that seems to contain modem files for the T-Mobile Springboard, but the last time I tried to flash modem files directly I lost my IMEI and SIM unlock until I did a full reinstall of ICS.
Not sure either about 302U firmwares.
I just read on development forum a 302u ICS firmware has just been released. I might try that one later, it's just quite annoying to lose everything on every flash, specially on stock ROMs, with no root.
Sent from my GT-I9300 using Tapatalk 2
LeoViotti said:
I just read on development forum a 302u ICS firmware has just been released. I might try that one later, it's just quite annoying to lose everything on every flash, specially on stock ROMs, with no root.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
You can add root to any ROM. Download the CWM-based recovery from here (note it does NOT do backups properly so you can't rely on that):
http://forum.xda-developers.com/showpost.php?p=23601045&postcount=7
And also place the SuperSU zip from here on the root of your external SD card:
http://forum.xda-developers.com/showthread.php?t=1538053
Flash CWM in fastboot as described, to both recovery and recovery2, and then you may have to try a few times to get into recovery. From a totally off state, hold down the volume "UP" key (which is the one pointing AWAY from the power button) and hold down power until it vibrates. Let go of power and hold on to the volume key. Then in CWM you can find the SuperSU zip on SD and flash it. Now you're rooted and you can take a Titanium Backup.
BUT if you ever want to do an official upgrade now, you will need to revert to a stock recovery. Take the recovery.img from any ICS firmware package and flash that in fastboot to recovery and recovery2. Or if you are every currently on an HC ROM you need to use an HC recovery.
Something else to try... worst case scenario is you'll have to wipe anyway. Download the Huawei firmware zip, extract the dload directory, and then open the update.zip. Delete the userdata.img.ext4 from that zip. Put the modified dload directory on external SD and proceed as usual. If it installs correctly it should (I hope?) leave your data partition alone.
According to member cmstlist below are the different between huawei official releases.
302u is an 850/1900/2100 version
301u is 900/2100. T-Mobile Springboard is 303u
AWS/1900/2100. AT&T's is 312u.
I thinks because of using wrong FW updates some times experienced 3G/HSPA issue.
Should I ?
[QUOTE=supun;28441328]According to member cmstlist below are the different between huawei official releases.
302u is an 850/1900/2100 version
301u is 900/2100. T-Mobile Springboard is 303u
AWS/1900/2100. AT&T's is 312u.
I thinks because of using wrong FW updates some times experienced 3G/HSPA issue.[/QUOTE]
------------------------------------------------------------------------------------
Can I quickly hijack this thread.
I have the 7A-301U. (Orange Tahiti UK) that came with ICS (Andy4). Works perfectly BUT abruptly stops ringing after one second on attempting to reach any 3G Signal Provider. (correct Orange EE sim inserted) . Similarly, if I attempt the simple task of dialing for my own IMEI ..... #06# Question: Should I re-Firmware from the Huawei site.
Ciao,ringrazie salute.
There's a new Mediapad s7 302 firmware on Huawei site (Dec 13). It says network function and official release version. It's still ICS.
312u = 302 ?
rurou said:
There's a new Mediapad s7 302 firmware on Huawei site (Dec 13). It says network function and official release version. It's still ICS.
Click to expand...
Click to collapse
Can I use the official 302 Firmware in my AT&T 312u?
I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
f64club said:
I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
Click to expand...
Click to collapse
the x10a was made for AT&T, you must first sim unlock the device to get it to work with t-mobile. you can download x10a firmware from THeLogiC's thread here: http://forum.xda-developers.com/showthread.php?t=1749426
since the x10a doesn't have the aws radios required for t-mobile's 3G network, you would only get 2G at best. good luck & hope this helps.