Hi XDAnians,
I'm new to Android, being a previous WinMobo user I need some help.
I just purchased a White Xperia x10i through ebay.
The phone comes with chinese firmware from Hong Kong.
I would like to change it to Australia Optus latest firmware branded or un-branded i don't really care, as long as it has everything in english.
Currently running;
Firmware: 1.6
Baseband: 1.1.31
Kernel: 2.6.29-rel
Build: R2BA026
Can anyone direct me to the ROM / Firmware download suitable.
Any help would be really appreciated!!!
Thanks heaps.
Check out the decrypted roms thread.
Sent from my X10i using XDA App
Just use the latest ROOT method and you will get the newest firmware
The simplest way to get onto the optus branded firmware is to signup @ www.omnius-server.com download omnius flash tool from here.
and download the optus .16 firmware from here. (Both links came from the omnius site in case they dont work when you click them).
Then use omnius to flash the phone.
Once completed, you can updated to the latest .26 firmware via SEUS or PC Companion.
You now have a fully branded optus X10. Should you want to root the phone, download the exploid package from the xda forums and root the phone from there.
Have done this a few times now for people that used the unbranded roms and wanted to go back to stock.
Works well and is nice and fast once you have all the files.
dangerzau said:
The simplest way to get onto the optus branded firmware is to signup @ www.omnius-server.com download omnius flash tool from here.
and download the optus .16 firmware from here. (Both links came from the omnius site in case they dont work when you click them).
Then use omnius to flash the phone.
Once completed, you can updated to the latest .26 firmware via SEUS or PC Companion.
You now have a fully branded optus X10. Should you want to root the phone, download the exploid package from the xda forums and root the phone from there.
Have done this a few times now for people that used the unbranded roms and wanted to go back to stock.
Works well and is nice and fast once you have all the files.
Click to expand...
Click to collapse
YOU ARE A GENIUS!!! Did everything you stated and now have latest Optus Branded ROM / Firmware. I can not Thank you enough!!!
Again, everyone here Thank you! I was so burdend by this... lol
Just out of curiousity, why do you want the Optus FW back?
They add something new? I was so sick of seeing that football icon
Sent from my X10i using Tapatalk
2twiztid said:
Just out of curiousity, why do you want the Optus FW back?
They add something new? I was so sick of seeing that football icon
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Well like u, being sick of the football icon, I was sick of the chinese stuff lol I didn't know what was going on! (Figure of speech) haha
Optus firmware was easier to setup. I did this mainly test the difference in firware and the android limitations.
Turns out, they're the same. LoL back to good old drawing board.
Sent from my X10i using XDA App
2twiztid said:
Just out of curiousity, why do you want the Optus FW back?
They add something new? I was so sick of seeing that football icon
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
I myself had the same issue with the optus firmware. I like being on the branded firmware for the time when they will release the next update.
If you root using exploid, you can then install titanium backup and freeze the football app, moxier mail and anything else thats annoying you.
So now I still have the official optus branded firmware, but without the extra crap I'll never use.
Would one click exploit work? Cant we just uninstall moxier etc. . .
Sent from my X10i using XDA App
Because moxier is a system application you need root to be able to have read/write acces. Thus allowing removal of system apps.
I run the Optus branded software and have removed the football app etc. Just open Titanium Backup go to preferences and select chuck norris mode it should delete fine after that.
Yeah but your phones locked to optus. try sticking a telstra sim in it and see what happens.
mine's running a uk branded firmware because i know australia will be a few months behind europe for the 2.1 update.
on a side note, i was playing around with a desire today but i still can't understand what people get so excited about - lags, browser freezes, full of plastic. this thing really is a cheap piece of tawainese crap. give me the x10 any day (and i only have the mini).
Will the optus firmware update to 026? or will we be stuck on a later version.
I want to go back to optus firmware for the usage app etc and then root it (I believe that is possible now) but if i'm still stuck on an older version, I'll stay on the generic and update to 026.
Punnisher_42 said:
Will the optus firmware update to 026? or will we be stuck on a later version.
I want to go back to optus firmware for the usage app etc and then root it (I believe that is possible now) but if i'm still stuck on an older version, I'll stay on the generic and update to 026.
Click to expand...
Click to collapse
You'll notice from the guide I posted on the first page that I stated to update the phone once back on branded firmware.
You will not be stuck on a certain revision and your phone will continue to recieve optus OTA's etc as they become available.
The reason I say to use the exploid method to root is it doesn't matter if you update at some stage you simply reinstall/rerun the same app and BOOM rooted phone again.
So to summarise....
Yes you can root your optus firmare
Yes you can upgrade on rooted optus firmware
No you will not be stuck on a certain firmware revision.
Related
when UK got the update, is it possible to "catch" 2.1 and flash it onto devices in other countries? like the firmwares? (r2ba026 and so on)
or do we need root first?
Sent from my rooted 030 x10i using XDA App
PoTi_96 said:
when UK got the update, is it possible to "catch" 2.1 and flash it onto devices in other countries?
Click to expand...
Click to collapse
I would have thought so, but will obviously have to wait for the devs to work their magic.
Alternatively you can "unbrand" your phone with a UK 1.6 build and get the UK update when it's out since your phone will then be recognized as a UK device.
sl1nk3 said:
Alternatively you can "unbrand" your phone with a UK 1.6 build and get the UK update when it's out since your phone will then be recognized as a UK device.
Click to expand...
Click to collapse
That is true, this is the one of the easiest way. I hope we have UK branded ROM ready.
I already mention this on the 2.1 news thread, just to get trolled by two fellow from my one country, miss-read that i was talking about 2.1 release in singapore.. sigh
http://forum.xda-developers.com/showthread.php?p=8171482#post8171482
Wait, so if the UK is the first country to get the 2.1 update then noone will get Eclair update until the end of November? What happened to the updates starting to roll out at the end of October?
Yes, it's already been stated a million times. If you are on Rogers in Canada the update won't be available until November/December.
Sweden, the UK, and Japan, being their largest market will most likely get 2.1 first imo.
i do have unbranded phone i used north america method . so lets say i put a uk rom in there would it change the frequency of the phone? cuz i wana use the 3g same as at&t
How does the update service know the phone is UK, AUS or whatever? Is the firmware itself embedded with this, or is it determined by the IP address of the network connection its updating from?
Could that Market Access app be used to make it appear like its from the UK? In the version I have it doesnt appear to have any UK providers pre-programmed, anyone know the number to program the SIM to?
On my x10 that I got from at&t I flashed unbranded x10I with no effects to 3g. So that doesn't affect it at all. Phone works great so the uk flash should in theory work.
Sent from my iSOCK using XDA App
ok thx to all...
one question.... does anyone know when 2.1 will be released in AUT (austria)?
Sent from my rooted 030 x10i using XDA App
PoTi_96 said:
ok thx to all...
one question.... does anyone know when 2.1 will be released in AUT (austria)?
Sent from my rooted 030 x10i using XDA App
Click to expand...
Click to collapse
no..............
2.1 related information on the 2.1 thread in the general section....
I need to send my phone back in for warranty (Camera stopped working) i've tried searching the previous threads but all the old methods like omnius dont work (can't download it) I've got the original root packages but that only gets me back to debranded x10i firmware. Kind of a new i've tried using the current flasher made by bin4ry and loading the firmware a_WWE_R1FA014_DEK.zip but i'm not even sure its rogers firmware and it hasnt yeilded me much success.
if anyone could help me out and give me a brief step by step
If all else fails use:
www.davinciteam.com
About $14 USD
Chunky Munkayy said:
I need to send my phone back in for warranty (Camera stopped working) i've tried searching the previous threads but all the old methods like omnius dont work (can't download it) I've got the original root packages but that only gets me back to debranded x10i firmware. Kind of a new i've tried using the current flasher made by bin4ry and loading the firmware a_WWE_R1FA014_DEK.zip but i'm not even sure its rogers firmware and it hasnt yeilded me much success.
if anyone could help me out and give me a brief step by step
Click to expand...
Click to collapse
I'm not 100% sure but I don't think a Rogers branded fw for the x10a was ever uploaded to XDA.
Edit: davinciteam should work too -- man it's been a while since I used that... I used to have a w650 a w800 a w850 and a w900 at different points. Haha.
The newest flasher from bin4ry doesn't work with version 1.6 as far as I know, so you'd have to use the old flasher (from those root packages you have) to flash it.
Unless someone can link to the OEM Rogers fw, your best bet is to go for the debranded one you mentioned in your post, with the older flasher from the root packages.
dude, I replaced mine, sent it back with generic 026, Rogers didn't say a word, I wouldn't stress about it.
Sent from my X10i using XDA App
Chunky Munkayy said:
I need to send my phone back in for warranty (Camera stopped working) i've tried searching the previous threads but all the old methods like omnius dont work (can't download it) I've got the original root packages but that only gets me back to debranded x10i firmware. Kind of a new i've tried using the current flasher made by bin4ry and loading the firmware a_WWE_R1FA014_DEK.zip but i'm not even sure its rogers firmware and it hasnt yeilded me much success.
if anyone could help me out and give me a brief step by step
Click to expand...
Click to collapse
Make sure you have download the WWE_R1FA014 for X10a from post # 2 in the following link, and flash it to your x10a with flash tool.
http://forum.xda-developers.com/showthread.php?t=683793
Once that done, connect your x10a with SEUS and perform an update. SEUS should update your Rogers X10a to the latest Roger's firmware version.
Regards
phuangk said:
Make sure you have download the WWE_R1FA014 for X10a from post # 2 in the following link, and flash it to your x10a with flash tool.
http://forum.xda-developers.com/showthread.php?t=683793
Once that done, connect your x10a with SEUS and perform an update. SEUS should update your Rogers X10a to the latest Roger's firmware version.
Regards
Click to expand...
Click to collapse
Oh thats a good point too. I forgot about that. Evil evil SEUS.
I'm in a similar situation here, my USB connector broke and i need to send it back in. I'm on build 023 and i've also rooted my phone too, i know that voids the warranty for sure. What do you think?
which flash tool and firmware files needed to restore photo to original x10a rogers 1.6 from nordic 2.1 x10i ?
didn't like 2.1 so want to restore my rogers x10a, anyway ?
Hi, I've seen so many threads now on this that I'm kind of confused. Can anyone tell me exactly what I need to do to update to 2.1? My phone is a X10a 1.6 on Rogers network in Canada.
Apparently rogers is releasing 2.1 tomorrow so unless u want to root just wait until Friday
Sent from my X10a using XDA App
Where did you get that info?
Waiting is the easiest thing. We're potentially so close to the update, you'd have to have a major issue to update with 'unsupported by Rogers' firmware at this point...IMO.
I suppose your right, if the update is in fact tomorrow then there really isn't a point in me doin anything but waiting. I just thought it would take rogers awhile to send out the update, Canada never usually gets anything else the world gets very quickly.
Morgyy said:
I suppose your right, if the update is in fact tomorrow then there really isn't a point in me doin anything but waiting. I just thought it would take rogers awhile to send out the update, Canada never usually gets anything else the world gets very quickly.
Click to expand...
Click to collapse
It's really hard to resist I know...up to you. There are tons of threads on it...no one that's done it seems to regret the decision but for me I have nothing wrong with my phone now...so i can wait
I don't believe that it will come out on Friday. I only hope. I have decided that I will do the root explorer method and change the code to Brazil generic unbranded x10a then do the update through pc companion if it does not come out byssunday. Very easy and simple method.
hi i need little clarification
so to flash 2.1 on your phone you need to root your phone first??
tetracortica said:
hi i need little clarification
so to flash 2.1 on your phone you need to root your phone first??
Click to expand...
Click to collapse
To flash to another country's verions of 2.1 yes, you'd need to root it first, debrand it second and then flash the update.
To install the update from Rogers you wouldn't need to do any of that.
Well you can root your phone with one click root or what ever the bleep its called and then install root explorer from the market or 4 shared and then open system folder then edit default.prop file and edit the country codes. There is another thread on that.
Then do update through pc companion (this is the same software that you will do update with once Rogers releases the update) all you are doing by editing the country code with root explorer is tricking pc companion into thinking you have a debranded Brazilian phone. After you do update it will not be rooted anymore cause the update wipes your phone clean.
Smoked33 said:
To flash to another country's verions of 2.1 yes, you'd need to root it first, debrand it second and then flash the update.
To install the update from Rogers you wouldn't need to do any of that.
Click to expand...
Click to collapse
WRONG. You don't need to be unlocked OR rooted OR debranded.
Once you put the phone into flash mode, you can flash any signed (official Sony) ROM, including the Global & Nordic generic ROMs (v2.1).
The bootloader hasn't been cracked so there are no custom ROMs (hence no 2.2) but official ROMs from around the world can still be used.
I flash my Rogers X10a a few hours after Nordic was released and a 2nd X10a once global came out. The only issue is that the Rogers APN information has to be entered in manually for 3G/3.5G/HSPA data.
Or you can do a flash but many ppl are scared to go that route as it requires a bit more effort.
My bad. I didn't key into flash part. Listen to the guy with two phones!
Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
draget said:
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net
Click to expand...
Click to collapse
Which no doubt stems from xda, so you might as well use the original guides from here.
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
And give this a read too - Step By Step Flashing 1.6 - 2.1
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
http://forum.xda-developers.com/showthread.php?t=895351
After that you'll be set to start enjoying your X10...
Jim
Sent from my X10i
jimbo77 said:
Aside of Xperiax10user advice. After you are done with the upgrade to. 504 2.1 version I recommend you to follow this easy thread to install Xrecovery, delete Junk apps and install Zdizihu's JIT v2...
Click to expand...
Click to collapse
Do that after getting to .24
draget said:
Hi All,
I've recently purchased an X10 and while its quite a nice phone, I'm sure it would be a hell of a lot nicer if it was running 2.1 - some things which are "missing" in 1.6 have started to annoy me haha.
To this end, it would appear Telstra are about the slowest telco on the planet to release an update. My current firmware is as follows:
X10a
Country: Australia, Brand: Telstra
Phone Software Version: 1227-4612_R2BA023 GENERIC
I understand that if I follow a tutorial such as the "Debrand your Xperia X10 [Tutorial]" on xperiax10.net (google finds it, I'm not allowed to link yet sorry!) and debrand it, SEUS will then automatically update my phone to 2.1 next time I try to update.
Can anyone tell me what is a good X10a firmware for use in Australia? Note that it needs to be X10a since I use an 850MHz "nextg" network. The list on the link above appears to give me a rather limited set of choices, none of which sound generic or australian (what makes latin america latin america??).
If anyone could give me some hints that would be most apprecitated!
Thanks,
Tom
Click to expand...
Click to collapse
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Tom, I had exactly the same issue with Telstra. My brother is with Optus and had his months ago. I finally cracked it and de-branded my phone, installed 2.1 and it all went fine. Trust me its worth it. Then i rooted it and have'nt looked back... goo luck mate
Hi,
Thanks for the advice! I followed the tutorial and updated to 504, then flashed again to .24, however on both of these my bluetooth does not work :-/ Windows 7 shows nothing in the services menu and the phone seems to pair with devices but never connect. Also the .24 ROM available appears to have been a X10i ROM, this doesn't seem to have mattered though as 850MHz HSDPA still seems to work.
Any thoughts on fixing bluetooth?
I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Fixed BT - turns out it didn't like to talk to my MacBookPro on Windows - updating Boot Camp drivers to 3.2 fixed that.
As for xrecovery, what does it do? And how does one root 0.24?
Thanks for the help!
Tom
draget said:
=I haven't installed the rooted version btw and I'm not quite sure what xrecovery does? Thanks!!
Click to expand...
Click to collapse
You could have saved time and flashed straight to it using SEUS if you didn't want to root.
draget said:
As for xrecovery, what does it do?
Click to expand...
Click to collapse
Allows you to flash to the phone at boot, so you can install custom and user ROMS, themes, and pretty much anything else.
draget said:
And how does one root 0.24?
Click to expand...
Click to collapse
XperiaX10iUser said:
X10Flash 2.1 final & 2.1 Firmware (Update Flasher 14.11.2010)
That will debrand and update you to 504 firmware, then you can install xRecovery, then install a prerooted .24 which is the latest FW, which can't be rooted in the usual methods just yet.
Click to expand...
Click to collapse
So you need to use the flashtools to flash back to 504, root, install xRecovery, then install the Pre-rooted .24.
batman_112 said:
1. Watch this tutorial.
2. Go here and download the flash tool and the X10a 2.1 world generic.
3. Flash the firmware as in the tutorial.
4. Enjoy!
Click to expand...
Click to collapse
Thanks for clarifying - it seems to be working nicely now so I'm pretty happy haha I'll get bored and have a go at rooting it eventually! After putting 504 on SEUS told me I was up to date, but all is good now
Ive seen this on the arc section and it works !
Do not try this if you have an unlocked bootloader or if you dont know what your doing! I'm not resposible if you break or brick your phone!
If you're already on a rooted .184/.181 firmware and OTA update is available for you just update your firmware. If not:
- Backup the apps you need (if you have root)
- flash to .184 UK firmware with the flashtool (Do a clean install or else you will have alot of force closes)
- heres the .184 UK firmware and the flash tool http://forum.xda-developers.com/showthread.php?t=920746
- Use Gingerbreak http://forum.xda-developers.com/showthread.php?t=1044765 or Superoneclick to root your device
- Update your Play using a OTA(over the air) update(Got to settings->About phone->Software update)
- Restore your apps
- Enjoy your rooted 2.3.3!!!
NOTE !!! : The only thing you should do after you flash and before ota update is to root and nuthin more.
NOTE 2: The Generic UK firmware works worldwide. Doesn't matter what phone you have except for the Verizon model. So if you have an AT&T R800a dev/google conference unit or UK or Rogers or France or any other phone. It will work It will not brick your phone
emann56 said:
Ive seen this on the arc section and it works !
Do not try this if you have an unlocked bootloader or if you dont know what your doing! I'm not resposible if you break or brick your phone!
If you're allready on a rooted .181 and OTA update is available for you just update your firmware. If not:
- flash to a 3.0.A.2.181 firmware with the flashtool
- Use Gingerbreak or Superoneclick to root your device
- Update your Arc/Play using a OTA(over the air) update(Got to settings->About phone->Software update)
- Enjoy your rooted 2.3.3!!!
Note this only works on .181 firmwares
Click to expand...
Click to collapse
I just saw this too in the arc section does it actually work?
Sent from my R800i using XDA App
thatsupnow said:
I just saw this too in the arc section does it actually work?
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Only xperia plays that would work are from NZ or canada. Both of them comes with .181 Ive been waiting for an OTA update but no dice. thatsupnow didnt you say you got one?
Yea man I've flashed the UK generic awhile ago and I've had this ota update for a bit now but didn't want to update didn't want to lose root
Sent from my R800i using XDA App
thatsupnow said:
Yea man I've flashed the UK generic awhile ago and I've had this ota update for a bit now but didn't want to update didn't want to lose root
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Check your build number. UK generic is .184 not 181
Yea I just saw that sorry I'm on .184
Well damn where can we get a .181 ftf file? Or do they exist for this phone
Sent from my R800i using XDA App
does it work with the 3.0.A.2.184?
need to wait til the weekend to try it~
uccoffee said:
does it work with the 3.0.A.2.184?
need to wait til the weekend to try it~
Click to expand...
Click to collapse
No it does not work with .184 just tried it downloaded the update went thru its process then rebooted phone and said could not update phone
Sent from my R800i using XDA App
I just looked on the phone and pc companion and I dont see the update, has anyone else in Canada done this yet?
I have my play rooted only.
Hi guys,
So far this methode only works with the .181 global generic firmware(1247-1061) on the Arc.
I think if you flash the global generic .181 firmware for the play this methode should also work for you guys.
good luck!
kistigun said:
Hi guys,
So far this methode only works with the .181 global generic firmware(1247-1061) on the Arc.
I think if you flash the global generic .181 firmware for the play this methode should also work for you guys.
good luck!
Click to expand...
Click to collapse
I don't think there is a .181 firmware for flashtool for the play just the .184
Sent from my R800i using XDA App
thatsupnow said:
I don't think there is a .181 firmware for flashtool for the play just the .184
Sent from my R800i using XDA App
Click to expand...
Click to collapse
someone at the arc forum did the same with the uk generic .184 arc firmware
kistigun said:
someone at the arc forum did the same with the uk generic .184 arc firmware
Click to expand...
Click to collapse
Did the same? Likes someone on the arc forum had .184 and did the ota update and it worked?
Sent from my R800i using XDA App
thatsupnow said:
No it does not work with .184 just tried it downloaded the update went thru its process then rebooted phone and said could not update phone
Sent from my R800i using XDA App
Click to expand...
Click to collapse
thatsupnow , please do not give incorrect info.
the 184 uK generic actually work!
use flashtool and flash to 184 UK, gingerbreak, and OTA = 2.3.3 with root!
please push up my thanks meter if you are happy with my post.
uccoffee said:
thatsupnow , please do not give incorrect info.
the 184 uK generic actually work!
use flashtool and flash to 184 UK, gingerbreak, and OTA = 2.3.3 with root!
please push up my thanks meter if you are happy with my post.
Click to expand...
Click to collapse
And where would i find the 184 generic?
uccoffee said:
thatsupnow , please do not give incorrect info.
the 184 uK generic actually work!
use flashtool and flash to 184 UK, gingerbreak, and OTA = 2.3.3 with root!
please push up my thanks meter if you are happy with my post.
Click to expand...
Click to collapse
Whoa wait a minute!, it didn't work at all when I tried it AFTER I had uninstalled all the apps on the safe list, and plus it was also said to have just been working on .181 so I take what I previously said back and I'm pretty sure I confirmed it working also BEFORE you put this up
Sent from my R800i using XDA App
uccoffee said:
thatsupnow , please do not give incorrect info.
the 184 uK generic actually work!
use flashtool and flash to 184 UK, gingerbreak, and OTA = 2.3.3 with root!
please push up my thanks meter if you are happy with my post.
Click to expand...
Click to collapse
remember there is lots to search thru BEFORE you go and make sensationalist claims like "giving wrong information" out just a thought tuff guy!!
I can confirm that this is not working for me. I've flashed the UK generic 1.84 a while back. I've removed some bloatware after rooting with gingerbreak.
Today I read this thread and gave it a try. It downloads the update and when I click ok it shuts off and does it's thing with the four dots. When it reboots it goes through the Sony txt and bootup anim and then the lock screen and says it's unable to update?
I've tried it twice. My phone is sim unlocked from purchase. Could it be the removed bloatware or a modified framework that causes it?
Regards Dousan...
e: I did it OTA.
help......
i have a strange problem i was on 2.3.3 unrooted
i tried to downgrade to the uk generic firmware in this post with
flashtool, it flashed ok i restarted phone but
when phone goes to desktop its blank just the darkblue wallpaper with nothing on it
kust the time in the top right taskbar and the signal strenth and the simcard symbol with a red x on it and the battery status bar
and that it.
it wont scroll left/right for more home screens, none of the buttons do anything
apart from power button and volume up/down
when i scroll the notification bar down it just says emergency calls only
and then in the top left its got the numbers 1980 3 8
what the hell is goin on
my fone boots up but i cant use it in any way
Is the OTA update available everywhere? Mines on 2.3.2 but if i try to OTA it says im already on the latest firmware.