i was looking for a WM 6.5 rom for atom and little did i realized that ive downloaded the ROM for exec. it did installed fine in my ATOM but it always bugs me when it is booting up. it only shows the boot screen with ATOM exec LOGO and suddenly shuts down. i was trying to install back the old rom but it says "The ROM that i am trying to install is not designed to work for this device...". is there any way i could remove the atom exec rom in my device and install my old ROM? i badly need help and this is the last place i could get them. thanks very much! any help will greatly be appreciated. More Power XDA-Dev Gurus.
My Device is: O2 ATOM
wrong ROM: O2 ATOM EXEC
Related
If you need PM
I modified the Atom exec's ExendedROM.img So it can be use in our Normal Atom!!!
Please NOTE:
unrar 5 rar package to C:\windows\TEMP
run device Software Update Utility.exe install!!!
Enjoy!!!
This pic is snap by CHT version
ENU version is same Ext0033 8)
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Ph4nt0m said:
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Click to expand...
Click to collapse
My sentiments exactly. Will this ENU version solve or i should say NOT have the flickering problem and the bootloader problem when reverting back to the original atom rom. I hope soooooo!!! Thanks for the hard work!!!
Has anyone tried this modified Rom atom exec 20060721 on ATOM.
I'm using ROM ATOM EXEC 20060614. This Rom is very good!!!
Cools !!! :lol:
lol
lol
lol
They are captured from a forum and I summarized them as followings.
Possible outcomes after flashing atom with exec rom 20060721.
1) Flickering screen if you REMOVE the battery (so stay away from exec roms if you plan to remove battery once a while, or you occasionally or accidentally deplete the battery). A possible reason is real atom exec use a different screen type (or hardware revision), as it show hardware revision "B" in system information of a real atom exec (later model)
2) New July exec rom does not allow you to return to any previous rom versions, neither via usb ActiveSync update nor bootloader mode, in fact, the bootloader mode in this version does not allow you flash any rom versions, if you try to flash rom in bootloader mode, it will stop and display "pls update in OS mode and synchronised"
3) Can't make a call without using bluetooth or headset, other people can't hear me when using phone mic. Some even added that other cannot hear voice from atom via headset.
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run july exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
thank you
Kyo said:
They are captured from a forum and I summarized them as followings.
Click to expand...
Click to collapse
Thank You! Seems that we should wait for a oficial Atom Update....
Thanks a lot buddy
I just want to know is how to backup the original rom,
using romupdate???
OK
Really cool
I installed the Atom Exec modified update on my Atom. And i tried to install the Old Rom Upgrade of Atom, am getting Country Id or Device Id error. Can anyone help me to install my old Atom ROM upgrade.
Try a hard reset. That should solve it.
Is it impossible to restore 426 after "full install" 0712? My screen flickering much and make me dizzy. Hope someone can help... thx
hard reset can't help. restore 0426 rom impossible.
If you want to revert to the 0426 rom, from the 0721 rom. Copy the eboot file from the 0426 installation to you miniSD card and go to bootloader, when its done you can install the 0426 rom again.
regards
yass
Anyone can help me !
I flash Atom Exec Rom at Atom, Now I can't flash any version at my Atom,
If can flash, it may stop at flashing Radio,than take it off can power up, but without phone mode[ just is PDA ] ,pls. help me!! Thank you.
You may put your atom to bootloader mode
Help!!!
My Atom Life goes Brick.
Yesterday I am planning to upgrade my atom life from wm5 CHT to wm6 ENG.
Unfortunately, I wrongly downloaded the Atom Exec rom in the forum and put into my atom life. Of course, flashing not successful, however the atom life stuck in the "device booting..." screen.
I can enter the bootloader and I try to reflash the correct rom. But either CHT or WWE rom also not successful with the same reason: "Customer or Model ID Error"
I already try to edit the pass.32 file and nothing changes and give the same result!
Anybody can tell me how can I refalsh my device?
Or I can use SD to reflash my machine?
henryto said:
Help!!!
My Atom Life goes Brick.
Yesterday I am planning to upgrade my atom life from wm5 CHT to wm6 ENG.
Unfortunately, I wrongly downloaded the Atom Exec rom in the forum and put into my atom life. Of course, flashing not successful, however the atom life stuck in the "device booting..." screen.
I can enter the bootloader and I try to reflash the correct rom. But either CHT or WWE rom also not successful with the same reason: "Customer or Model ID Error"
I already try to edit the pass.32 file and nothing changes and give the same result!
Anybody can tell me how can I refalsh my device?
Or I can use SD to reflash my machine?
Click to expand...
Click to collapse
You can try the procedure in the WIKI under upgrading problems. Since your bootloader has been changed. BUT instead of using the ATOM eboot.nb0, use the Atom Life eboot.nb0 as replacement.
Good Luck!
jiggs said:
You can try the procedure in the WIKI under upgrading problems. Since your bootloader has been changed. BUT instead of using the ATOM eboot.nb0, use the Atom Life eboot.nb0 as replacement.
Good Luck!
Click to expand...
Click to collapse
Jiggs,
Thanks for your suggestion!
I have try but not useful!
Henry
same too me
same to me got other solution ??
O2 Atom LIFE....
After the package file release (AL1_CB_0425_WWE_B1_DSUU.exe), he was copy all of file to MiniSD and reset Atom Life to bootloader mode and it was upgrade. So, upgrade to 99% it was notice error. He softs reset it after wait for minute. it can not power on and black screen.
My Atom is Blinking RED... & BLANK SCREEN.... ((((((((((((
I'm copy IPL.nb0 and EBOOT.nb0 to minisd card... & ... (((((((
PLZ HELP ME!
try to flash back the shipped rom from O2.
My atom Life is dead too
I just have got it yesterday andthen i flashed it today with the WM 6.1 rom from Medkid and then was working, then i wanted to get back to the original rom then i downloaded one from the wmg homepage and was not working, then i extracted the files and put on my minisd and it has flashed but then it was not working anymore... is just black screen... nothing works.. tried removing the baterry, reseting, hard reseting,.. no lights on.. just when i plug it to charge i see the charging light on.. Can someone please help me too.. pleaseeeee
thanks
My Atom
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
unplug MiniSD then Try to do hard reset...
you can rescue your devices (atom/Atom exec / Atom life/ HP 68xx/ O2 Flame) by JTAG
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
rizalnasa said:
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
Click to expand...
Click to collapse
Can you still get the bootloader?
If you can boot it up to the boot loader. you can plug into your computer and flash another rom. I had the same problem a week ago. now my atom is working again with Homers WM6 rom
I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
there is a solution...try searching the forum manually sometimes search doesn't help
i know i saw some threads about people flashing wrong roms
or if you want send him the phone back and request money because you bought it as an exec which is more expensive then atom...well he could make it as it happened accidently,but it might be a trick to sell the phone for more money
first of all thanks for replying.
I have managed to search and find
some stuff about wrong ROM flashing and
currently I am reinstalling an Atom ROM
over my existing ROM... hope this will solve
all the '256 colour' and flickering problems..
Again, thank you for helping me
I will post the results ASAP.
You can go through this.
http://forum.xda-developers.com/showthread.php?t=358442
JingerCha said:
I am very confused and sad right now
Basically the Atom was bought over the internet
with the seller advertising it as Atom Exec
and that is why I installed Atom Exec modified ROM.
Now he has e-mailed me saying that he actually
sold me an Atom.
Now I am getting massive problems, my Atom now
has an Atom Exec ROM and the screen cannot display
photos properly and it almost seems as if it is running
on 256 Colours. I am also getting massive screen flickering
although I have not installed any CPU increaser or anything.
When I try to upgrade the ROM using DSUU (the way I installed
Atom EXEC) it tells me that the Device ID or Country is wrong.
I have THOROUGHLY read the Wiki and the forum and tried
a Bootloader mode but when I put the eboot in my MiniSD and
go into bootloader it instantly says download complete and
when I try to upgrade it it does not work telling me to do it on
OS first.
I am not even sure if this community is alive or dead
I am just very confused since I am still a student and
I've spend all my pocket money buying this phone...
If someone IS out there, please give me a hand!
Click to expand...
Click to collapse
follow this simple steps:
1. download original ROM from o2/MWG website
2. flash the unit with the original ROM.
your unit should be restored.
Execute any Atom rom, goto Win/Temp<-PC, copy EBOOT.nb0 and save it somewhere.
Execute the Atom Exec rom you currently have installed and replace EBOOT.nb0.
Once finished you will then be able to flash back to Atom rom via bootloader.