hi,
i previously had installed 1.42 HSPL version on my hd2 and the rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
i wanted a stock rom so i searched online for the stock one and found
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but this started heating up my mobile and so each time it gets switched off by itself.. so now i decided to reinstalled the previous one
so i re- cracked my phone using HSPL run and it was written we cracked it on the phone... then my phone went black again and it gets restarted by itself over and over again.......
help..wat am i supposed to do?
i didnt know that it would bve that big a deal to install a new rom on my phone and now my phone is useless...i cant reinstall the previous rom.....
everytime i come on the site new rom keeps on coming with beautiful themes and i want to installl them......
what am i supposed to do?
djameel said:
then my phone went black again and it gets restarted by itself over and over again.......
Click to expand...
Click to collapse
check for bent battery pins.
djameel said:
hi,
i previously had installed 1.42 HSPL version on my hd2 and the rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
i wanted a stock rom so i searched online for the stock one and found
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but this started heating up my mobile and so each time it gets switched off by itself.. so now i decided to reinstalled the previous one
so i re- cracked my phone using HSPL run and it was written we cracked it on the phone... then my phone went black again and it gets restarted by itself over and over again.......
help..wat am i supposed to do?
i didnt know that it would bve that big a deal to install a new rom on my phone and now my phone is useless...i cant reinstall the previous rom.....
everytime i come on the site new rom keeps on coming with beautiful themes and i want to installl them......
what am i supposed to do?
Click to expand...
Click to collapse
If I were you, I would do the following:
1.turn off the phone and charge it until full power (green light indicator).
2.go into bootloader (the four color screen) by pressing the vol down key and power up button at the same time
3.check your hspl and make sure it is 2.08 HSPL
4.plug your cable and wait until you see the "USB" at the bottom of the screen (it is advisable to use Win XP)
5.do Task 29
6.flash your Radio
7.flash your ROM
8. hard reset
Also need to be ensured that the ROM must be compatible with the phone (some ROM is not compatible with TMOUS)
Cheers...
(1) what is task 29.....
(2) it is written SPL- 1.42.HSPL
(3) how am i supposed to know which rom is compatible with my HTC....
My phone is useless once its start heating( which was not present when i first install the 1st ROM ,, my mobile was in Russian before so i installed the WWE, but on this version some programs weren't working, so i decided to install the original english stock ROM which found on the net as stated in my original thread.)
Please i really need your help guys...
Please tell me for my htc hd2 which english version rom is compatible and which HSPL is needed?
I really do not understand anything about the SPL, HSPL.... and ROMs....
so your help will be very useful to me... I spent a lot of my money on this phone and in MAuritius the phone is not yet on the market.....so please guys do help me...
which version of SPL or HSPL is needed for which ROM version?
and i noticed another thing...besides heating, the other thing that turns off restarts my mobile is when im using the internet.....2 mins on the net and then the mobile goes on restarting itself ...i have to take off the battery for it to stop and wait for the mobile to cool down again...
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
I need help my phone won't load up after HTC screen!
what can i do ? : (
Did you flash anything prior to this problem or even install a program or tweak the registry?
i flashed a rom..
i tried hard rest.
nothing works.
but i think i did a mistake ,Full TMOUS Compatible with 576 RAM + 1 GB Storage and i have normal HD Leo..
can that be the reason?
The problem is if you have a TMOUS and flash a non TMOUS compatible ROM or even worse a .51 Radio. There is no problem the other way.
Did you HSLP flash your phone first?
The ROM you are flashing, unless it is a stock one (ie from HTC) does not include a Radio ROM. These custom ROMs will specify what Radio ROMs work with their ROMs. These Radio ROMs have to be flashed first, although if you go into bootloader mode (Hold Volume-down button and switch on), then connect and flash the correct Radio ROM.
yes i have HSLP 2.08 .
and i also installed radio rom 2.12.50 before flashing to the rom.
the rom is VBNROM▐ Aug 16 - RC5.5 Android Compat▐ BLACK/GTX▐ 21915/24623▐ Test 23129/23569▐
and i have a European leo version not the american.
so can that be a problem?
so u say i can do the hold down and power then i can install a new rom?
fred_up
thanks i did the Down Vol And power and flashed to a new rom.
and works ^^ thank u so much
From the VBNROM ROM Thread
v-b-n said:
....
Btw...I do not recommend 2.12.xx radio with my ROMs due to RIL compatibility...they may work fine but are not a perfect match
....
Click to expand...
Click to collapse
oh i see that's y it didn't work probably.
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
hello evrey body
i installed miri "Miri & Steve0007 Elegancia V4.0 | Sep 13" rom on my mobile and evrey thing worked well then i made soft reset but Unfortunately while it was reseting it stopped on the white screen where it written htc in green font, then i thought maybe it take long to reset so i waited for about 30 min but nth happened. Then i made hard reset and nth worked.
After that i decide its better to make format but i faced the same problem while i was formating cuz its also stopped on the color screen where the color is red blue green white, I tried several times but it keeped stoping, I also tried to install new rom but its imposible, cuz the mobile doesn't boot to windows so the windows mobile center cant find it.
Can anyone help me please??????
Sir, you are looking fore help, but you don't give much information.
Oky you inform us witch rom you are traying to install, and that you have some problems with it. (it's obvious following your thread title)
but if you would some help there needed some more information.
HSPL version?
Radio version?
Device? Europa/usa model?
Did you tray to reinstall stock rom?
Did you read/follow the instructions on the threads where you got your cooked rom?
rafatgt said:
Unfortunately while it was reseting it stopped on the white screen where it written htc in green font, then i thought maybe it take long to reset so i waited for about 30 min but nth happened. Then i made hard reset and nth worked.
Click to expand...
Click to collapse
you did flash a matching radio, right?
You MUST use radio:
2.07.50.27 or 2.08.50.08_2 or 2.10.50.19_2 or 2.10. 50.08_2 or 2.09.50.29_2 or 2.10.50.26 -(Latest 2.13 T-MOU Radio)
Or 2.11.50.20 or 2.12.50.02
Click to expand...
Click to collapse
thats from elegancia post 1
rafatgt said:
I also tried to install new rom but its imposible, cuz the mobile doesn't boot to windows so the windows mobile center cant find it.
Can anyone help me please??????
Click to expand...
Click to collapse
dont need to have running phone to flash. Go into bootloader, connect usb, wait for 'serial' to become 'usb' and flash your rom or radio, , , for you you should now flash a radio and i bet the phone boots.
Hello guys i have a problem with my HTC HD2.
I have searched a lot on this site before posting my problem.
This is what happens and what i did:
The phone doesn't pass the white HTC screen with the RGD letters below.
What i have tried:
HSPL 2.08.HSPL, 1.66, 1.42, 2.08.000
Radio: Leo_RADIO_2.08.50.05, Leo_RADIO_2.15.50.14
Roms: Stock Vodafone (Dutch) rom, Energy rom
Hard reset (vol up +down on startup).
Tried task 29 and started everything all over again
I went to the a phone store, they couldnt help me. Afterwards i went to the official store but i don't have my receipt anymore so i don't have a warranty..
So i think i have tried everything i could find on this forum. Tried most of the HSPL versions with diferent roms. But all of them stay on the startup screen (white htc start screen)
If someone can help me please, this is really my last chance
Thanks,
Issam
ps. i hope this is the good section to post this problem.
Well the phone starts up now (it actually works for a few minutes!). I haven't changed anything, the only thing i did is leave the battery out for like 1 hour. But everytime i start up the phone it freezes and / or turns of after 1 min or something. Sometimes it doesn't even boot up like the usual problem, but then i remove the battery for 10 minutes and it boots normal again.
So i really don't have a clue
i was experimenting all day again with my htc.
What i found out was, the longer i keep my battery out of the phone the longer i can use it.
For example: I had the battery out of the phone for about 2 hours, when I put it back in i could use it for like 10 minutes.
But when i keep the battery out for 10 minutes it freezes within 1 minute.
Maybe this will help me get the solution to this problem.
I would format the sd card just in case, also make sure you have the correct versions of what you need, rom raido ect, because theres two types of HD2s, hope this helps!!
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
IssamRazza said:
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
Click to expand...
Click to collapse
You should remove hspl , and after that install the latest rom available on htc site for your device (download the rom from htc site, with your serial number ) . Official roms have included radio inside of them. If HSPL is removed and you have again problems with your device with an official rom installed, then you have a hardware problem. You could try to boot up without sd card installed, to see if the card is the problem.
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
IssamRazza said:
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
Click to expand...
Click to collapse
I see that you are on t-mobile network , so you should download your rom from here: http://www.t-mobile.com/wmupgrade/ . Just enter your imei and download the update. Remove HSPL and then install the official rom. Perform a hard reset after that , and see if is all ok . Keep us informed pls.
Hi, yes i have a T-mobile contract, but my phone is Vodafone branden so i'll have to download the Vodafone version I think.
But what i just did is this:
I had HSPL 2.08.HSPL and a Custom ROM on it. So I was planning on maybe sending it back. Thats why I performed a task 29 to delete all the previous (parts of the) Roms. After that i changed my HSPL to 1.66.000, the original spl I had on it.
But now the phone does vibrate when i hold the power butten (with vol down), but there is no picture, so i cant get into the phone or the Red green blue screen. So i think the phone will not boot because I deleted the Rom on the phone and also returned the spl to original.
Is there a solution for this problem? omg this phone just doesn't seem to be working for me (maybe it's me that is not working for the phone).
It is normal since you did a task29. Verify if you did it correctly here http://forum.xda-developers.com/showthread.php?t=644781
Yes i have read that thread thank you, but the question is:
How can i get the phone to connect with my PC, so I can install original ROM. Because the Boatloader screen won't start up, to make connection with my Computer. I press the power button and vol down butten at the same time. Tried it at least 20 times
Thanks you all. But i sent this phone back to HTC. The board was replaced and they sent it back, so it works again! finally my phone back
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
NeXuSqtek said:
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
Click to expand...
Click to collapse
battery out, connect to wall charger and turn charger on, insert battery, dont touch it for a good half hour. dont worry if charging light doesnt come on straight away.
It sounds like the battery is possibly over discharged. doing as i listed 'should' let the phone start charging without trying to turn itself on.
ktod_16 said:
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
Click to expand...
Click to collapse
yes send it back, silly to try and fix an error with a brand new phone. (Also, hijacking threads is considered bad manners. )
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
it's highly unlikely, but as with anything of this nature nothing is foolproof
elgeor said:
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
Click to expand...
Click to collapse
bad news for you i'm afraid. i'm not aware of any successful fixing of radio update error.
Ok,thanks, I hope that the battery is the source of this problem,not the device .
I went today at a local service,they've told me that the battery is 100% charged. Unfortunately the problem is with my HD2. I left it in service and I will pick it up tomorrow repaired I hope. Thank you for helping me.
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Nice thread
netvpn7 said:
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Click to expand...
Click to collapse
I knew I made a mistake, my question now is can it be fixed ?
Hi, I tried to instal Android 2.3 Gingerbread on my htc hd2 but when I installed MAGLDR it stopped working. I realized I had installed the wrong HSPL, but now it won't start or respond to a USB connection. I can't turn it on or off and it only shows a white image with HTC on it....Does someone know how to help?
Greetzz
pull battery, restart into bootloader, apply 2.08.hspl,restart.
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Mark-- said:
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
Click to expand...
Click to collapse
Finally I was able to load my HD2 into MAGLDR so problem solved..