I have a weird problem with my SGSII. If i connect my phone to my car bluetooth with the car charger, it stay connected for as long as I am in the car. If however i connect to the car on battery, once the screen turns off I lose bluetooth connect. I have tried changing the screen time and that didn't work, I also tried making my bluetooth visable always and that also didn't work. Can't understand why it only happens while on battery.
Any suggestions?
I have the same issue with bluetooth on my SII.
Whenever the screen is asleep bluetooth devices will not connect, I have to turn the screen on to allow the devices to connect.
I've setup auto pairing in the linkkeys file which works fine if the screen is on (so no prompts to pair devices, just works).
The main device I want to use is a liveview, which I understand has problems, but I've tested other devices and the phone seems to be at fault.
It can't be designed that bluetooth will only connect if your using your phone, kinda defeats the purpose of most bt devices.
tried making my phone always visible, and even tried disabling the lock screens.
using CM7 stable, and a fix would be highly appreciated!
Hmmm.... I don't have that problem.
Maybe some weird power save option?
that's what I was thinking, but I've not been able to find any settings on the phone or through google.
I've just updated to the latest cm7 nightly and the problem seems to be the same. It has an addition bluetooth setting called 'Fast Connections' but this doesn't seem to change anything.
The only other thing I've noticed is that the linkkeys file that I edited to allow the liveview to auto pair (without me having to pull down the notification bar nad authorise it) seems to keep re-editing the file so the phone prompts to pair, so I'm assuming now that's the issue rather than a power thing, so how to prevent that?
Hello guys, I would have posted this directly to the MROM thread but I can't due to not having 10 posts....so I'm posting here and hoping somebody can help me or draw attention from someone in that thread that is running this rom. I'm having a few issues with this ROM that are leaving me unable to use my phone at times and others that are just annoying.
[ROM] MROM-Olympus [CM7] build:20130330
Problems with the Phone function:
1. The biggest problem for me is sometimes trying to dial or receive calls stops working, and you don't know this, when everything else on the phone is functioning fine. A reboot will allow the phone to be able to dial out and receive calls once again. I have not noticed any patterns ...just when I get ready to make a phone call it says "dialing" and then after a few seconds a beep and it hangs up. Also as noted when this happens I'm unable to receive calls and everyone gets my voice mail. It was doing this after a install and without anything else being installed...I do feel that it's gotten worse as in happening more often but that could just be my frustration making it seem that way.
2. Another phone issue since day one: Sometimes after dialing a number the screen goes off and pressing the power button may or may not bring the screen back on or if it does the screen comes on for a split second then goes back off. It's impossible to end a call this way or to enable speaker phone, look up contacts. When it's functioning correctly a call is made then the screen goes off when i place the phone close to my ear and comes back on when i take it away. A reboot fixes this issue usually for awhile, I've also had to take the battery out twice because the power button did nothing.
Problems with the wifi tethering function:
3. Wifi tethering works but I've noticed problems on upstream packets. On 4G the phone can hit 5-6 Mbps down and 1.5 Mbps up on T-mobile. I've ran test via "speedtest dot net" which they have an android app so you can test your data speed right from the phone. Now when I connect "wifi tether" my computer to it and run the test from the computer I get the 5-6 Mbps down but the upload test takes forever to start and when it does I usually get anything from 25-220 Kbps. I performed this from linux, windows and an android tablet ..all report slow upload speeds while the phone directly running the same tests get very good performance. I'm wondering if this could be a issue with the wifi driver or possible kernel issue of sorts.
I choose this rom because from what I read it was one of the most stable and everything on the phone works which is the most important thing to me.
Thanks in advance!
Happened again today, phone uptime was 17hrs. I'd made a few phone calls and received one, pulled the phone out of my pocket to make another latter and it did it's thing where it says dialing .....a few seconds then the beep like when you hangup and then back to the contacts. I checked this time the status and it showed in service and data connected. I was also able to txt and browse the internet just not make or receive calls until a reboot.
Hi everyone.
I need help with adb.
The problem is, that i don't know how to make "auto connect" with device.
I need connect with cell phone without touch on the screen.
Is ny way to this?
Or, if it is impossible. How to force pop up with connection type menu on the phone screen. I known, that this pop windowe is showing after plug cable, but after five second is hide. How to maintain this pop menu while user choose type connection?
Rest regards.
When i got this device i thought how stupid this was and hoped after flashing a custom rom maybe it would eliminate this stupid feature of this device. It seems HTC thinks it's a good idea to turn the screen ON after ending a phone call, WTF?
At work i use my bluetooth headset all day with my phone in my pocket. I will take my phone out, dial the number i want to speak to, press power to turn screen off, put device in pocket and have my conversation. I end the phone conversation with my bluetooth headset and guess what? The dang phone's screen turns on while it is in my pocket. I guess the light sensor has zero effect here! So now since this happens and my device has a timeout of 2min i set before screen turns off my phone accidentally "butt dials" people and without me knowing i'm now calling people randomly while i'm working!
Another case. I have my phone in my car's cupholder, i use bluetooth to make a call with my car, it initiates the call to my phone and again it turns the screen ON to make the call. WHY? I never pressed power on my device to turn the screen on to make a call. So again i press the power button to turn screen off while in call. I hang up the call when i'm done via the bluetooth in my car and again the device turns the screen back ON once i disconnect the call via bluetooth.
I just don't understand the logic behind this? Is this some HTC thing or all android? Coming from iPhone 4 never had this issue so was a first for me with this device. Just don't see the reason or logic for this?
Anyway to prevent this or stop this from happening? I mean isn't that the point of bluetooth to not need to touch your device thus no need for the screen to be turned on????
+1
It seems that this is not a HTC thing because I have the same behavior on my Samsung device. Same problem as well with pocket dialing during/after a call. Really annoying. I had the same thing on my old HTC Nexus One running Froyo, so this is not a new bug. Back then I tried a lot of different apps, and none helped. I even flashed CyanogenMod on it and it didn't change anything.
I really hope someone has run across a fix whether it's an app, a patch or a whole new ROM, because pulling my phone out of my pocket to turn the screen back off TWICE for every call I make or receive is getting to be a pain.
I can't believe this behavior is voluntary on the part of the designers. If it is, please someone explain why.
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
ethanon said:
You can use TASKER(automation app at Play Store ) to Get you screen off after a call or while connected to the bluetooth ..
Click to expand...
Click to collapse
Just downloaded but no idea how to use this thing. Not very saavy with this type of stuff. How can I use tasker to turn the screen off when ending a call ONLY while connected to a Bluetooth headset? This is my biggie since it's in my pocket.
Got it to work
Ok, I downloaded Tasker and I'm impressed.
Here's how I got this to work:
1: Create new profile using STATE, then go to NET, then hit BLUETOOTH CONNECTED. Here you can specify if you want only a specific device or any Bluetooth.
2: Set new task: SET plsLock to ON
3: Set exit task: SET plsLock to OFF
4: Create new profile using EVENT, then go to PHONE, and hit PHONE OFFHOOK.
5: Set new task as: SCREEN, SYSTEM LOCK
6: Hit IF, and specify if plsLock is ON
7: Create new profile using EVENT, then go to PHONE, and hit PHONE IDLE.
8: Set new task as: SCREEN, SYSTEM LOCK
9: Hit IF, and specify if plsLock is ON.
You're done.
Since I had the same problem with the wired headset, I also created a profile with HARDWARE, HEADSET that sets the variable plsLock to ON and exit task sets it back to OFF. You can name the variable anything you want and it will still work.
If anyone has a better/simpler way of programming this, please share. I just started using this program and am still trying to wrap my head around the way this is structured.
As this stands, it works... But it's still a patch on something that should be an option in Android.
Let me know what you think.
Ok thank you I'll give it a try. Yeah could never understand why my device thinks it's a good idea to turn screen back on after ending a call via Bluetooth or not? I receive call, I then press power button to turn screen off bit continue my call, the caller hangs up, boom my screen turns on displaying the phone dialer until my time out settings turn screen off. Dumbest feature I swear. Hello phone I pressed power offbutton to turn screen off, get the hint and keep screen off until I press power button and want it back on again. No sense...
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
ethanon said:
Deeznuts, did you manage to get it working with tasker ? I guess it is the only possible way to get to your objective. Learning Tasker will give a new dimension to your phone. More over I will try to make a profile for your and get working .
For some reading
http://www.pocketables.com/2013/06/...rt-0-tips-and-tricks-for-learning-tasker.html
Click to expand...
Click to collapse
No unfortunately not. I would greatly appreciate that! I would think it's a simple task but honestly I'm very handicapped when it's comes to stuff like this.
Basically a string for tasker that would simply just do this:
When my device is connected to a Bluetooth device whether it be my car kit, headset, stereo headset, etc. and a phone call ends where by me pressing the End Call on screen button, by ending call with car kit, headset, etc, doesn't matter but will make the screen turn off. That's it.
When connected via Bluetooth, a phone call ends, screen turns off.
Now here's a kicker and not sure if this part would be harder. I'm connected via Bluetooth headset or device, I have screen on to manually make a phone call, then while on the call I press the power button to turn screen off while on call and put device in my pocket. Now when the call eventually ends I would want the screen to stay off.
I will read into the link you provided and mess with it somewhere. Thank you for your time and help.
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
ethanon said:
Correct me if I am wrong , you mean to say that no matter what you want your screen to stay off after a call ...
Click to expand...
Click to collapse
Correct BUT only when connected to a Bluetooth device. My gripe is on a Bluetooth call, place a call manually then talk on headset, car kit, etc. I press power button to turn screen off then put phone back in pocket, when call ends the phone turns screen back on for some reason. Never understood this?
Hi all,
The problem is, I need to have Google Messages running on a phone and paired with my other phone (so I can receive my SMS messages from my primary number on this second phone).
The thing is, that it's possible to pair Google Messages app running on a tablet (it shows the QR code needed for pairing at the start) but when started on a phone, it goes right to my messages list.
I think it's because it recognizes a phone as a phone, not a tablet. Would it be possible for a phone to pretend being a tablet somehow ?