First of all, this is not a post to seek help in using the volume key. Please do not post how you got into the download mode or recovery.
Hello, in the past week, I and a few others on the forum are having a problem where we are not able to gain access to download mode or recovery by using the volume key. Before anyone start to suggest on what we need to try, let me assure you that we have all searched the forum and tried all the method that had been thrown out there. I am coming to a conclusion that Vibrant release with a date from August will have the volume keys locked. What i like to do is for the people that ARE able to gain access using the volume key please post the date located on the serial sticker on the box. Like wise for the people that are having problem post the date located on the serial sticker on the box. If we end up with mix result, I think we might need to start looking into the serial numbers.
I will go first. Me and my girlfriend's phone are both on 8/13/2010.
edit: two more dates from the following post:
http://forum.xda-developers.com/showthread.php?t=760696&page=2
Edit2: So after much reading and digging through the forums here and else where, I'm going to conclude that any vibrant after August will have the vol. keys locked from download mode and recovery mod. Only way to get into those two modes will be from ADB. This will really put a limit on flashing roms and trying new firmwares. Hopefully this is a firmware issue/lock. That will make this a really easy fix or else time to trade phone on craigs list... lol.
Not working
8/13/2010
8/16/2010
8/28/2010
Working
7/15/2010
7/23/2010
No one want to help contribute to confirm the assumption that all the new vibrant from Aug. have the vol. keys locked? oh well...
My original (now defective) Vibrant build date 07/15/2010 was able to get into download and recovery mode with hardware buttons.
My new replacement Vibrant build date 08/16/2010 is not able at all via the hardware buttons. Only way is via adb.
man... i wish i had gotten it a month earlier...
I also got mine in August and can only access downloader through adb.
My first phone had a date of 7/14 on the box and the buttons didn't work for download/recovery. My replacement phone has a date of 7/14 on the box, and it does work.
People in Canada have been seeing this problem a lot. Bell phones and the lack of 3 button combo attempted to correlate it to serial numbers and failed. The last post suggests there may be a software fix coming soon.
Got my first one Aug 14th and replacement one Aug 21st. Both could get to recovery / download mode with keys. Although neither had same combination. My current one gets into download mode by Holding Vol Down + Power + Plug In USB while holding this.
Recovery is No USB hold down and power.
EDIT::: This is on my device only, don't tell me no it isn't. It is.
zaduma said:
Got my first one Aug 14th and replacement one Aug 21st. Both could get to recovery / download mode with keys. Although neither had same combination. My current one gets into download mode by Holding Vol Down + Power + Plug In USB while holding this.
Recovery is No USB hold down and power.
EDIT::: This is on my device only, don't tell me no it isn't. It is.
Click to expand...
Click to collapse
Just want to make sure. Are those dates from the sticker on the box or the date you got it?
Sent from my SGH-T959 using XDA App
shootr said:
My first phone had a date of 7/14 on the box and the buttons didn't work for download/recovery. My replacement phone has a date of 7/14 on the box, and it does work.
People in Canada have been seeing this problem a lot. Bell phones and the lack of 3 button combo attempted to correlate it to serial numbers and failed. The last post suggests there may be a software fix coming soon.
Click to expand...
Click to collapse
I have a feeling it is in the firmware.
Sent from my SGH-T959 using XDA App
One man's firmware is another man's software
I wonder if it's something as simple as the primary bootloader not debouncing the volume buttons..
Date I got lol. Woops
Sent from my SGH-T959 using XDA App
I have the same problem. I have done all the combinations and couldnt get into the download mode.
I tried to root the device by using one click root program and I saw the black page (download/reset page I guess?) and I didnt know I should select apply sdcard:update.zip so I select reboot system now option and the phone rebooted itself than opened normally without being rooted.
I can see the update.zip in the phone but it is not rooted I guess because the titanium backup program doesnt work (it keeps saying the phone is not rooted)
I tried to root the phone, unroot the phone by using the buttons in the program from xp, but nothing worked.
The box is at home so I will check the date of it later..
Is ADB safe? I dont know much of programming but is it some kind of controlling the phone by using cmd from the computer?
I hope this issue will resolve soon..
I got my vibrant on the 17th, I believe, and am able to get into recovery mode with the volume keys. It might be from one of the July builds though, since the store I went to had just run out that day and had to go to another store to pick it up. I'll have to confirm the date once I get lunch break and can go home.
[edit]i finally checked the date on the box and it's a 7/6 model [/edit]
ytn82 said:
Is ADB safe? I dont know much of programming but is it some kind of controlling the phone by using cmd from the computer?
I hope this issue will resolve soon..
Click to expand...
Click to collapse
It's safe if you know what you're doing, or follow the guides on here. I found it pretty easy to get the hang of once I played around with it a little and following what people said about it on here
My first Vibrant which DID go into recovery was 7/7/2010
My second Vibrant which DID NOT go into recovery had 10.7 on the inside sticker.
My third Vibrant which DID go into recovery has 10.8 on the inside sticker. I will add this last phone has a different sticker inside which does not have the Samsung logo on it, it looks like a generic sticker.
Vodafone/Vodacom South Africa,
Saw a 2010.8.15 date on my battery and keys don't work.
Same problem. Same actions. Same result.
Vibrant dated 10.07
I have had three different TMO Vibrants already all of which were dated on or after 7/23. None of which let me get into recovery through the vol. keys.
Does anybody have any news?
8/13 doesn't work
Date on box 8/07/2010
Can access download mode with two different hardware methods, no access to recovery mode with any and all methods I've tried.
Sent from my SGH-T959 using XDA App
Related
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
What file did you flash?
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
crazy25000 said:
What file did you flash?
Click to expand...
Click to collapse
Stupidly, I believed I Odin-ed a file named "T959UVJI6.rar". Which if I remember right, is a custom kernel. I never really understood the whole kernel ordeal. I used to have a motorola milestone, which, I would do all all sorts of things to with no problem. But, that never included kernels. And for the most part, it didn't have any hardware key lock.
I, think, I need to do the jig mod-y thingy.
mdi2001 said:
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm not sure how, because, apparently, my samsung's 3 keys are locked. I have tried so many times, but, it never works. Sadly.
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
s15274n said:
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
Click to expand...
Click to collapse
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
^ ironically it was the JI6 update that alleviated a lot of the "hardware locked" Vibrants.
Have you tryed making a JIG? It helps if you can't get into download mode
supaduparimy said:
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Click to expand...
Click to collapse
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
brisseau said:
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
Click to expand...
Click to collapse
Sadly, my samsung, was one of the newer models, that released with the combination lock. And so, no matter how much i have tried, it never worked.
I tried every technique I have seen. Nothing.
xXcybersniperXx said:
Have you tryed making a JIG? It helps if you can't get into download mode
Click to expand...
Click to collapse
Yes, I have, actually. I found it really hard though. Mainly because the wires were way too small. But, the reason I gave up, is because the resistor is larger then the wire, and so, needed very precise soldering. I could've used the back, but, all usbs are different; and the ones i had, were very much different then all the demonstrations videos i watched.
PS I am actually buying a stick online.
(I can't post link)
As my last resource, to something I must get done, I will pay whatever...
younix258 said:
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
Click to expand...
Click to collapse
Yes... yes...
Yeah, but from what I remember, that software, just forced the samsung into download or recovery mode. From there, then the person would just mod a file to change that. But, my phone wont even do as the force says.... in the first place... It has always, just stayed in the continuous boot phase...
If you have skype or any chat program, I can help you easily.
crazy25000 said:
If you have skype or any chat program, I can help you easily.
Click to expand...
Click to collapse
The reason I am in dire need for this android to work, is because, I have no other way of flourishing in life. It was the one thing that kept everything in balance. Stupid moto, now it physically dies
On another hand, I have a iPod Touch 1G, lol.
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Oxirane said:
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Click to expand...
Click to collapse
I wish there was a physical jig seller in Vancouver (where I live).
The button combos don't work on my phone. Sadly. It was the newly made models with the button combo block.
If it helps, before, when I could go into that option, I did it by using a toolkit and making it put me to recovery/download mode.
UPDATE! I had someone help me fix it, but he failed too. It now just hangs on the boot show thingy. (rather then flashing). Oddly, my cell can still access the computer, which I think is a good thing. As in, when I plug it while the screen stays put, my computers makes a sound. What could this mean? CMD to download mode?
As for boot loader, I highly doubt it. Since, I have had no reason to look-up what they are. ehhe.
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
supaduparimy said:
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
Click to expand...
Click to collapse
Are you using the Tmobile US vibrant or the bell/virgin canada vibrant?
SGH-T959 or I9000m?
If you have an I9000m you are in the wrong forum.
Oxirane said:
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Nononon, it is stuck on the galaxy text boot screen thingy. In other words, just like before, but this time it isnt flashing continuously. If it was the big yellow thingy, oh thank god... i wish.
As for that someone putting me in hardware lock, from my understanding, the only way to unbrick a locked device is through a jig. That being said, I searched up where I live for anyone with a jig, and to my luck, only one group had it. So I went there, and bam, it can now somewhat access the computer.
NOTE: I am going to receive a built jig in the mail in a few days.
From what I know, having a locked device, means, a jig is a must.
As for ADB, I am looking all over for instructions how to use that, but, I can't really find any through ones.
I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin.
I am really unfamiler with this samsung galaxy.
I did everything possible with ,y Motorola Milestone.
Awoooooo!!!! BAYWOLF's program Rules
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
dseldown said:
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
Click to expand...
Click to collapse
Ahha, thank you for the suggestion, but, that wont do. It was my original fix, towards getting into recovery/download mode. But, for some sad reason, it doesn't work for bricked devices. In simple, it just says device is not find. Ironicly, the computer makes a sound with the cell is plugged in, but, thats about it apparently.
Oh yes, the cell has to have USB debugging activated. But, since I have a bricked, it can't go within the phone to find it.
NOTE: it has always been in debugging mode.
Update is being pushed out slowly, but I figured out a way to forcibly do it in kies.
It simple. Do not plug in your phone while you are doing this.
First, make sure you update to the new version of kies. Then go to the menu bar> tools, then firmware upgrade and initialization.
Click until you get to the screen that asks you to input your S/N and Model name of your phone. Enter in these details. It's behind the battery.
Once you do this, a screen will pop up asking if you are sure you want to upgrade to CSC:LE5. AKA ice cream sandwich.
At this point, plug in your phone and it'll go through.
Your welcome.
EDIT: as of today, Monday June 25th 2012, at 11:00 AM, the update is officially available through KIES. If you don't see it now, a popup telling you to upgrade will appear by tomorrow.
EDIT 2: DO NOT UPDATE TO ICS. IT SUCKS. AND IT IS NOT NEARLY AS SMOOTH AS GINGERBREAD. If you hate android lag, the update will almost certianly piss you off. If you have questions about how its different, just ask. I already downgraded to gingerbread again. ICS = Not missed.
EDIT 3: (copy pasta from a post I made)
amaddux29 said:
Can you "downgrade" unrooted from Kies as easily as upgrading?
Click to expand...
Click to collapse
No. I assumed that the update through kies updated the bootloaders, so I found a stock 2.3.4 one click odin executable W/ Bootloaders in the development section and flashed that. Make sure you factory reset and clear cache in 3e recovery before you do so. New bootloaders can't take advantage of the Jig. I also didn't want to find out what flashing gingerbread on ICS bootloaders would do my phone.
I find 2.3.6 has battery issues, and I find 2.3.4 to be THE most stable release.
http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46
The file you want from this page is the I777UCKH7-CL503881 Stock Binaries, and you want the odin3 one click download. It's one of the ones with the warning text in red.
To restore your phone to stock 2.3.4 once on ICS do the following:
1) Boot into 3e recovery (power + volume down + volume up)
-Wipe Cache
-Factory Restore
2) Pull battery
-boot into download mode (volume down + volume up, then connect phone to computer while buttons are simultaneously pressed)
3) Open the one click executable. Make sure it recognizes the phone
-It will say [COM8] or something. Just make sure its green.
4) Flash it. It will work. after you boot up into gingerbread, If the system freezes after the At&t logo just go back into 3e recovery and wipe cache + factory reset again. It will work. Trust me.
Note: ODIN is a very tricky piece of software. When you click flash, it will probably not work and say "failed" or something along those lines. Try it again. It will work. It took me almost 20 tries to get the flash to go through. Also try flashing it as soon as you plug in your phone (not even 2 seconds after it is recognized). That seems to work. Don't be worried if it never seems to go through.
Note: YOU ARE FLASHING BOOTLOADERS. PLEASE PLEASE PLEASE BE CAREFUL. If ODIN DOES NOT WORK OR YOUR COMPUTER SHUTS OFF HALFWAY THOUGH, OR ODIN QUITS, NEVER PULL THE BATTERY FROM YOUR PHONE. As long as you see a downloading sign on your phone, your phone is ALWAYS recoverable. Just open up the odin executable again, make sure your phone is recognized, and restart the process. If odin freezes halfway through the process, always restart odin, NEVER touch your phone. Your phone can always be written to while in the download state. This is how 99% of all bricking happens, because people always feel the need to turn off their phone in the middle of the process.
Cookies for the effort.
Already common knowledge for forcing OTA updates, at least to anyone that actually takes the time to read/search the forums.
BROKKANIC said:
Cookies for the effort.
Already common knowledge for forcing OTA updates, at least to anyone that actually takes the time to read/search the forums.
Click to expand...
Click to collapse
Except its not ota......
Nice trick by the way op
Thanks for the trick. One question - how long did it take for you (or for anyone else who decided to use this method)? It's been stuck at the 90% value for about 2 hours for me, and I'm beginning to get a little worried, since these things don't normally take so long (according to friends I've asked, anyhoo). Any help would be greatly appreciated.
Nawhdee said:
Thanks for the trick. One question - how long did it take for you (or for anyone else who decided to use this method)? It's been stuck at the 90% value for about 2 hours for me, and I'm beginning to get a little worried, since these things don't normally take so long (according to friends I've asked, anyhoo). Any help would be greatly appreciated.
Click to expand...
Click to collapse
Are you talking about 90% fnished downloading/extracting? or 90% putting it on the phone (with the green bar going across the phone)?
If it hasn't started putting it on the phone yet you should be fine to unplug it and start over. If you remove cable while it's actually putting in on the phone, you will have problems. not sure which kind though. maybe just a soft brick. you should be able to get back to download mode though.
jack man said:
Are you talking about 90% fnished downloading/extracting? or 90% putting it on the phone (with the green bar going across the phone)?
If it hasn't started putting it on the phone yet you should be fine to unplug it and start over. If you remove cable while it's actually putting in on the phone, you will have problems. not sure which kind though. maybe just a soft brick. you should be able to get back to download mode though.
Click to expand...
Click to collapse
I apologize for not being specific - 90% putting it on the phone, I presume, since that green bar you mentioned is there (with the "Downloading..." underscored with a "Do not turn off target !!").
Assuming this is beyond the norm, do you think I have no choice but to risk the soft brick?
EDIT: Oops, it's actually a blue bar. My bad. So it's safe to disengage then?
Nawhdee said:
I apologize for not being specific - 90% putting it on the phone, I presume, since that green bar you mentioned is there (with the "Downloading..." underscored with a "Do not turn off target !!").
Assuming this is beyond the norm, do you think I have no choice but to risk the soft brick?
Click to expand...
Click to collapse
Yeah, if it's been at that point for that long, you will have to risk it. do you have a jig? if you don't, invest in one. they are worth having around.
Let us know if it works out. I'm crossing my fingers for you.
BobbyBlue said:
Update is being pushed out slowly, but I figured out a way to forcibly do it in kies.
It simple. Do not plug in your phone while you are doing this.
First, make sure you update to the new version of kies. Then go to the menu bar> tools, then firmware upgrade and initialization.
Click until you get to the screen that asks you to input your S/N and Model name of your phone. Enter in these details. It's behind the battery.
Once you do this, a screen will pop up asking if you are sure you want to upgrade to CSC:LE5. AKA ice cream sandwich.
At this point, plug in your phone and it'll go through.
Your welcome.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA
jack man said:
Yeah, if it's been at that point for that long, you will have to risk it. do you have a jig? if you don't, invest in one. they are worth having around.
Let us know if it works out. I'm crossing my fingers for you.
Click to expand...
Click to collapse
No, I don't...I'll be sure to purchase one as soon as possible.
As for the phone, I shut down my computer and unplugged it - received a "Firmware upgrade encountered an issue" screen. At the moment, I'm looking around for a fix. This seems to be a soft brick, though, so I'm optimistic. If there is anything you could suggest for me, it'd be greatly appreciated.
jack man has posted those instructions two days ago
Look Here
Nawhdee said:
No, I don't...I'll be sure to purchase one as soon as possible.
As for the phone, I shut down my computer and unplugged it - received a "Firmware upgrade encountered an issue" screen. At the moment, I'm looking around for a fix. This seems to be a soft brick, though, so I'm optimistic. If there is anything you could suggest for me, it'd be greatly appreciated.
Click to expand...
Click to collapse
see if this works: hold down both volume keys at the same time. then, while holding them, plug in your usb cable. hold the keys until you see a screen with green text. you will then hit the vol up key o get to download mode. then you could start the whole process over again through KIES.
I'm not sure what I'm doing wrong but when I enter the imei into the s/n blank it tells me it's not a valid serial number. I've tried entering the actual s/n and I get a weird message in what looks like Chinese. Any other suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA
dnf007 said:
I'm not sure what I'm doing wrong but when I enter the imei into the s/n blank it tells me it's not a valid serial number. I've tried entering the actual s/n and I get a weird message in what looks like Chinese. Any other suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
Yeah, the IMEI won't work anyway.
That weird message was coming up the day that Samsung said their servers would be down (yesterday). They may have figured out that people were getting the "recovery" firmware that way and disabled it. Who knows.
So any word if that method will work now?
Sent from my SAMSUNG-SGH-I777 using XDA
I tried this method but now my phone only shows the "firmware upgrade encountered an issue error." I tried doing the recovery process on kies and tried to install the firmware again but to no avail. Does anyone have an idea how to work around this?
adypac said:
I tried this method but now my phone only shows the "firmware upgrade encountered an issue error." I tried doing the recovery process on kies and tried to install the firmware again but to no avail. Does anyone have an idea how to work around this?
Click to expand...
Click to collapse
You could try the one-click downloader in the Download Repository. The link is there, but the file is still uploading to dropbox. You'll get a 404 error until the upload is complete. Dropbox is really slow uploading things. Link to the Download Repository is in my signature.
Kies is crap
I've been trying and trying to download from Kies but when I plug in my phone it says I'm up to date and when I try to do the manual update it tells me my serial number is wrong and to try again...any suggestions?
dnf007 said:
...any suggestions?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1650948
go back to GB
Hi,
I followed the process and successfully updated to ics, but the phone is hanging frequently. Can I go back to GB? If so how. Please help. I did this on officially unlocked att galaxy s2. Also the tethering also not working properly. I am using this phone in India.
Thanks
urgent pls help
I am loosing the network on and off pls help what is the process to go back to GB
Okay, so I have this phone and the info attached to the imei DCNO Prod Test phone. It has the following build listed N900VVREBMJ5 test-keys. I checked for root access with a app and it didn't have root access. I tried to root with odin3 root_de_la etc and it came up with an error and was basically soft bricked. Was able to reload the pit file and eventually get it working again. I clearly don't know what I'm doing and bought this phone online and have learned very little since last night. It loads up with the custom logo etc etc. I'm looking load a regular stock rom onto or just a custom one, but no matter what I do I get an error.. Can anybody help.. thanks
Do you know if SecureBoot is enabled? Reboot into Odin/Download then take a picture. Also, under your battery, what does the label say?
Sent from my SM-N900V using Tapatalk
ryanbg said:
Do you know if SecureBoot is enabled? Reboot into Odin/Download then take a picture. Also, under your battery, what does the label say?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
+1
Turn off phone, turn it on holding power button + home button + down volume button and see if it say secureboot enabled. If it doesn't you might become very famous.
ummm why are we double posting??
http://forum.xda-developers.com/showthread.php?t=2569643
Closed because it is already posted in Q and A...
Hi everyone. I got a problem with my HTC M8.
First of all, I didn't make with it any changes (as unlock bootloader, root or installing any custom OS or recovery etc.) Week ago I left device, connected to PC for all night, and, I gess, with "bad" micro-USB cable.
Next day I couldn't boot this phone. I connected it to charger and after little time it was loaded to fastboot. But up today I can't do anything with phone: I can't unlock it, can't factory reset, can't boot to recovery etc...
I tried to find any same simptomes in google, but found nothing
As you can see on screenshots, I made steps for unlock bootloader but on device I didn't see notification about unlocking.
Is this an AT&T version M8? If so, try an RUU.
Other than that, if the phone stopped working spontaneously without being modded, I wouldn't then try to mod it by unlocking the bootloader. I don't see how the cable or leaving it plugged to computer can cause this. If the phone is defective and stock condition, your best bet may be to get warranty service (or exchange for new, if the phone is still very recently purchased).
I though that I lost recovery in some way and should simply unlock bootloader, install custom recovery and got success ))
I don't see how the cable or leaving it plugged to computer can cause this. If the phone is defective and stock condition, your best bet may be to get warranty service (or exchange for new, if the phone is still very recently purchased).
Click to expand...
Click to collapse
Yes, but next day I connected another phone, Nexus 5, and it was fully discharged (connected to enabled PC with this cable). And I though that the reason the same... With one exeption - Nexus 5 just was charged and ok, HTC M8 - lost data or corrupted it in some way...
Warranty it's the last chance. Phone arrived from Canada) I'm from Ukraine. In all cases it will cost money. At first I want to find the solution by myself (and with help of xda community and internet)
MaggiMag363 said:
I though that I lost recovery in some way and should simply unlock bootloader, install custom recovery and got success ))
Click to expand...
Click to collapse
Are you aware that stock recovery appears as a red triangle with exclamation? It doesn't look the same as custom recovery (TWRP, CWM). When you see the red triangle, press vol (down or up, can't remember) to see the recovery menu selections.
I asked if you have the AT&T version or not (this section is AT&T specific) and you never answered that.
redpoint73 said:
Are you aware that stock recovery appears as a red triangle with exclamation? It doesn't look the same as custom recovery (TWRP, CWM). When you see the red triangle, press vol (down or up, can't remember) to see the recovery menu selections.
I asked if you have the AT&T version or not (this section is AT&T specific) and you never answered that.
Click to expand...
Click to collapse
It should be international.
About recovery - I tried to open it from fastboot. Ineffectually. And I tried to boot it with vol. and power buttons. I don't see any icons with exclamations - fastboot loads after black screen, no matter, buttons were pressed or not.
MaggiMag363 said:
It should be international.
About recovery - I tried to open it from fastboot. Ineffectually. And I tried to boot it with vol. and power buttons. I don't see any icons with exclamations - fastboot loads after black screen, no matter, buttons were pressed or not.
Click to expand...
Click to collapse
This forum section is specific to the US AT&T version. You would most likely get better help on the international forum (more users there).
Do you get the phone ID in response if you type the command: fastboot devices
redpoint73 said:
This forum section is specific to the US AT&T version. You would most likely get better help on the international forum (more users there).
Do you get the phone ID in response if you type the command: fastboot devices
Click to expand...
Click to collapse
Yes I have. And I can open menu "Barcode" from fastboot and see IMEI, SN and MB.
I think that is your serial number, so you should delete it (personal info).
I didn't actually want to know the output, I just wanted to make sure fastboot connectivity was working.
You might try to find the stock recovery for your CID and re-install it to see if that helps: http://forum.xda-developers.com/showthread.php?t=2701376
redpoint73 said:
I think that is your serial number, so you should delete it (personal info).
I didn't actually want to know the output, I just wanted to make sure fastboot connectivity was working.
You might try to find the stock recovery for your CID and re-install it to see if that helps: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
oo, thanks) I thought that you can recognise mobile provider via SN
I looked at general topic http://forum.xda-developers.com/htc-one-m8/help and found somekind of the same simptomes, but all of them were after rooting, installing custom ROM etc. I did nothing One more thing came to me now - phone could start upgrading and then discharged battery.
You might try to find the stock recovery for your CID and re-install it to see if that helps: http://forum.xda-developers.com/show....php?t=2701376
Click to expand...
Click to collapse
thanks. Tomorrow I will try this topic
MaggiMag363 said:
oo, thanks) I thought that you can recognise mobile provider via SN
I looked at general topic http://forum.xda-developers.com/htc-one-m8/help and found somekind of the same simptomes, but all of them were after rooting, installing custom ROM etc. I did nothing One more thing came to me now - phone could start upgrading and then discharged battery.
Click to expand...
Click to collapse
My advice is to post to the international forum. Your situation is pretty unique, so I'd say it justifies a new thread. And there are a lot of folks on that forum section that are smarter than me, and may have some better ideas.
http://forum.xda-developers.com/htc-one-m8/help/htc-m8-phone-boots-fastboot-factory-t2953795
I created topic in main theme. Thanks.
Hello,
I've purchased a Galaxy Tab S6 (SM-T865N) International version, mainly to use it with with 4G in US on Xfinity Mobile. I received the tablet, inserted the SIM card and it was working 'relatively' on the network. Every now & then I would get a message 'failed to register to network', but for the most part, mobile data is working.
Since it is a Korea version, certain things don't work. Nothing major, but I would like to make it perfect. Certain User update posts in the Galaxy store display in Korean Language, and the weather app is slightly limited, with the error 'not available outside of Korea'.
I did some searching and found other firmware available for this exact model on Sammobile. My country (US) is not supported, but I would like to try the UK firmware, if nothing else, to fix some of the language issues. I downloaded the UK firmware package and Odin (3.13 & 3.14.1). I installed the Samsung drivers. I booted the tablet into recovery by holding 'power & volume up' then connected it to the computer. Odin WILL NOT found the tablet. I rebooted into the normal OS and connected it and Odin then found it, but obviously that doesn't work. I can not get Odin to connect while in recovery.
Does anyone have suggestions on what might be happening?
And maybe all this effort isn't worth it either, hard telling whether it'll work better or worse with the UK firmware on it. Any tips?
It's been several years since I did this sort of thing, so I'm a little rusty. I thought this would be a simple procedure.
it sounds to me like you are not putting it into download / Odin mode, but I could be wrong. I haven't tried to use Odin on this tablet yet, but was actually about to do this same thing as well, as my device has an origin CSC of singapore, and hasn't had an official update in almost 2 months, so I was going to flash the UK version as well.
---------- Post added at 07:58 PM ---------- Previous post was at 07:51 PM ----------
So I just tested it on my tablet, here is what you need to do:
Power off the device
Press and hold the Volume up button and then press and hold the power button
When you see the initial boot screen, release the power button, but keep holding volume button
When you get to the recovery screen, you need to use the volume up / down buttons to highlight the option that has "bootloader" in the title, and press the power button to select it.
Then you should see a screen that says "Download" or something like that.
Plug in USB, and Odin should see the device.
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Your correct
bartleby999 said:
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Click to expand...
Click to collapse
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
I did a lot of reading before I rooted this Tab and that piece of Info came from This thread.
fallingup said:
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
Click to expand...
Click to collapse
Sorry, I dont. I meant to make that post in another thread. I have not flashed anything on my device yet.
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
buafnan said:
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
Click to expand...
Click to collapse
Did you able to flash that firmware on your tablet?
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
buafnan said:
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
Click to expand...
Click to collapse
Have you tried reflashing the old firmware of your country? Weird that its not working.
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
buafnan said:
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
Click to expand...
Click to collapse
Can't you put in a warranty claim ? Here where i am based i had a new battery, and new screen installed from samsung! this was a Galaxy S8+ was well over 2 years old they did it for free! New screen and new battery! My Note 9 is going this monday for a new battery my Tab S6 works flawlessly so don't need to send that in! but i'm sure if you ring up Samsung they will replace the motherboard for free as it's not even 12 months old!