So I been searching and searching for the perfect case for this phone. I had that crappy snap on case with the hole in the back. I hate that case! There was another case I almost bought that didn't have the ugly hole in the back but the front piece was ugly.
This one I stumbled upon looks really nice! I'm going to order and I'll let you guy know how it is. OR if anyone already has it, let us know how it is please!
I would post the link but apparently I'm not allowed to. It's on fommy.com the case is made by Amzer. They're the Rubberized snap on case.
The Amzer cases are nice except that most people that order them never get them and end up canceling their order after three or four weeks just waiting for it to ship
I bought this snap on case: http://amzn.to/brbhLj from Amazon and it actually didn't have that stupid belt clip hole in the back like it shows in the picture. And so far it's held up better than the $15 snap-on case I got earlier which a tab broke off of within 2 days.
bryyyan said:
So I been searching and searching for the perfect case for this phone. I had that crappy snap on case with the hole in the back. I hate that case! There was another case I almost bought that didn't have the ugly hole in the back but the front piece was ugly.
This one I stumbled upon looks really nice! I'm going to order and I'll let you guy know how it is. OR if anyone already has it, let us know how it is please!
I would post the link but apparently I'm not allowed to. It's on fommy.com the case is made by Amzer. They're the Rubberized snap on case.
Click to expand...
Click to collapse
looks kinda like the kickstand one I got from TMO, minus the stand and the rubber grips on the sides... too bad they don't mention if it has a liner or if it just the smooth plastic on the inside, felt liner is one reason I got the TMO one that and it had the strongest looking tabs of all the cases I looked at.
It looks like a nice case!
The one I had gotten was cheap and flimsy and had a hard time staying attached
Related
ok so i want a armor case, screen cover for the phone
and i only found this one so far
http://www.daydeal.com/product.php?productid=17676
has anyone got that? is it good?
anyone know of any others??
let me know, thanks - randy
http://gadgetmix.com/reviews/armor_case/armor_metal_case_htc_hearld_dopod_c800.htm
I bought it from boxwave
kdskamal said:
http://gadgetmix.com/reviews/armor_case/armor_metal_case_htc_hearld_dopod_c800.htm
I bought it from boxwave
Click to expand...
Click to collapse
thats for the herald not the wing... as silly as it soundsi use the lil mirror thingy time to time..
I have this one:
http://www.boxwave.com/products/armorcase/armor-case-t-mobile-wing_2710.htm
It is awesome, very sturdy and you can still use the phone's buttons. It has the proper cutout for the mirror and also opens in the correct direction to make the keyboard usable with the case still on (unlike some of the cheaper ones).
Build quality is tight and the neoprene liner holds the phone firmly in the case so it won't drop out. The case is light but adds a little bulk to the phone, it's still the slimmest option for pocket carry and could take a hard shot from a turnstyle or counter with no problem.
Definitely cheaper than a replacement lcd!
Hope that helps =)
erf i posted the worng link in my first post..
bugsy
the link i ppostedi n there now
http://www.daydeal.com/product.php?productid=17676
that
is it me or is that the same case...?
looks ALOT like it
and its a bit cheeper plus free shipping also
They do look similar but I can't tell if the cheaper one has a protective plexiglass window or just an opening...
invisibleSHIELD
I bought one of those invisibleSHIELD thingies yesterday for my Wing.
I have one for my iPod Tocuh and it hasn't gotten a single scratch on it!!!
http://www.invisibleshield.com/smartphone/t-mobile/wing.php
Here's a link to get half price invisible shields
http://www.zagg.com/showspecial
$12 for the wing full-body is a decent deal, I'm just not sure how it will stick to the rubberized case of the wing and it does not give any crush/crack protection.
Either way I'm probably gonna get a screen protector
the one on daydeal does have a screen cover i emailed and asked. lol
hahaha, you gotta ask these days
Give it a shot, it's probably made by the same factory
wouldn't the protective cover over the screen keep you from using the touchscreen?
bugsy714 said:
hahaha, you gotta ask these days
Give it a shot, it's probably made by the same factory
Click to expand...
Click to collapse
hell yea.. i mena from the pics they look 100% the same vent holes and everything then the odds 2 companys make the same thing are slim
Bakkendance said:
wouldn't the protective cover over the screen keep you from using the touchscreen?
Click to expand...
Click to collapse
yes thats why its a flip open case
for eazy access to the screen
in your logic a armor case would also prevent some one from opening the phone to the keyboard
same thing it flips open
So did it come yet? I'm curious to hear how the build quality/tightness of lockup etc. to see if I paid an extra $14 for a boxwave sticker =)
im having issues with my creditcard and inturn paypal also..
havnt resolved it yet so i am with out a case
with that said my friend got the plastic body case for the phone and it was pretty much feeling lol
i have this case, nice fit, the matte metal is pretty slippery and it has slipped out of my hands a couple of times. one time the case popped open when it hit the pavement. also, when you drop it, the case will get silver nicks all over it. it is pretty strong, but will deform a little when you drop it, you can kinda bend and reshape the case to good as new. case also dents if it lands squarely on a corner.
nyitalian718 said:
erf i posted the worng link in my first post..
bugsy
the link i ppostedi n there now
http://www.daydeal.com/product.php?productid=17676
that
is it me or is that the same case...?
looks ALOT like it
and its a bit cheeper plus free shipping also
Click to expand...
Click to collapse
hi there,
recently i encountered a iPhone that had on it an amazing case. the case was solid in my hand and felt like it count take on tons of damage. i really liked the case and was hoping to find one for the g1.
The case was made by otterbox but I looked on their site and they dont have any cases listed for the g1. has anyone found similar high quality cases to otterbox?
here is a link to the iPhone case so you can better compare.
http://www.otterbox.com/iphone-cases/iphone-3g-3gs-cases/iphone-3g-3gs-defender-case/
austriker27 said:
hi there,
recently i encountered a iPhone that had on it an amazing case. the case was solid in my hand and felt like it count take on tons of damage. i really liked the case and was hoping to find one for the g1.
The case was made by otterbox but I looked on their site and they dont have any cases listed for the g1. has anyone found similar high quality cases to otterbox?
here is a link to the iPhone case so you can better compare.
http://www.otterbox.com/iphone-cases/iphone-3g-3gs-cases/iphone-3g-3gs-defender-case/
Click to expand...
Click to collapse
My brother has that case, and I doubt you'll find anything like that for the G1. That right there is a DAMN nice case. It has a TWO cases. Inner case is plastic, and outer is rubber. Both nice and thick. Also a built on screen protector. Its just HUGE. As I said, though, don't expect anything like that for the G1. They have one for a myTouch, but I doubt it compares to the iPhone one.
For the most part you probably wouldn't need a case like that unless you are bringing your phone into a war zone. However, the G1 is a bit of an awkward phone in the way its designed. It has a strange sliding mechanism and that bizarre chin which makes cases a little more difficult to design. I've used a Fishbone case for over a year now. It is a hybrid silicone and hard plastic case, here is a link:
http://www.amazon.com/HTC-Titanium-..._1_3?ie=UTF8&s=wireless&qid=1279768828&sr=8-3
When I bought it over a year ago, it was around $7 for everything including shipping... the cost has gone up quite a bit for reasons unknown.
Alternatively you can try the metal cases
http://www.amazon.com/T-Mobile-G1-A..._1_3?ie=UTF8&s=wireless&qid=1279768873&sr=1-3
But this case actually doesn't allow you to use the touch screen nor slide the phone open, it locks in place, you have to unlock it and open the case to use your phone, it really is more of a carrying case rather than a protective phone cover.
Here is another one you might like, it is a full silicone case for the phone:
http://cgi.ebay.com/Soft-Silicone-S...ewItem&pt=PDA_Accessories&hash=item1c0c6bbafa
The cost is okay, but after hearing some reviews from fellow members on the site, I would avoid getting the clear one, because apparently it has a yellowish tint to it.
Out of all these cases the only one I have used is the Fishbone case (and an Invisible Shield). You probably aren't considering an Invisible Shield, because they seriously ONLY protect your phone from scratches and nothing else, there is no impact resistance to it. It covers 95% of your phone, the 5% it doesn't cover is the corners of your phone, also the most likely places to get damaged when you drop it or just have it in your pocket.
So, again, I say go with the Fishbone case. It actually looks pretty cool, considering the G1 isn't a very spectacular looking phone in the first place. (don't get me wrong, I love my G1)
sweet thanks for the help!!
Yea well who knows, maybe I AM going into a warzone hehe.. Nah I just like the feel of that otterbox case.
Thanks for the heads up on that amazon case, I will check it out! And yea I heard those certain ebay cases are a wee bit yellowy.
Just ordered one of these, it was my favorite case on my Dinc2. I'll put some pictures up once I get it on my phone.
Pics? I just ordered one.
Here ya go. Really liking the case, probably going to order another one for my 2nd Rezound.
Thanks for the pics. Looks awesome. I may have to order one. It's not even on the Casemate website yet.
No problem.
Sent from one of my Rezounds via XDA Premium
Nice! Can't wait for mine to come in. I can't stand when the case wraps around the screen side too much. This one looks like it just barely protrudes on the front side.
Does this case protect the bottom/top Bezel from gets scuffed in case the phone lands on the bottom or top when dropped?
I really like the looks of this case, a lot! Just wondering if it offers sufficient protection since the case doesn't span the entire perimeter on the front.
Thanks!
I just got this case http://www.amazon.com/gp/product/B006BFP9QS/ref=oh_o00_s00_i00_details
that looks to have the same fit as this Case Mate case as far as the ends go. Doesn't completely protect the ends if it falls on it at the right angle but I like it. And this one has a kickstand which I really wanted. I think I'm going to review it in a few days after I've had it a bit.
Hello
Have any of you tried the TRIDENT AEGIS case for the ATRIX 4G. It surely looks great and functional, but I'm not sure abut the build quality as it can be docked along with the phone. Please post your review and pictures
Sure!
Just ordered from their site, and look very promising, JUS THE WAY I WAS EXPECTING A CASE TO BE for the Atrix! (And let me tell you I own at least 6 cases each one 30+ f*** bucks)
Once I get it delivered, will upload a modest review and some pictures attached in HD dock and Lapdock, (´cause of course, it won´t fit car dock)
My primary case is an Active Case from Seidio (such a fantastic combo) along with its Holster Clip. However, taking my Atrix out of the case for car dock navigation or simply hd dock is a pain to the a-....
OK! I remember! (this mojitos won´t help that out... however, mmmmm!) The point of this case for me is to get it fit in the holster clip from seidio active without the case for sure, using trident´s.
Will let you know!
ok, let us know, i just felt in love with the nice "man solid appeal"of the case
Think it twice
Hey guys,
As you know I ordered this case some time ago, and just received it. And you know what? I´m not in the mood to make a review of it, at the second attempt to open the flap to engage the media/dock mode, one of the strings just broke up, the bottom one, so easy (and I´m a very careful person regarding these matters) without forcing it at all or aplying so much pressure.
So if you want to try for yourself, go for it BUT PLEASE, excercise the most delicate usage if don´t wanna go my way.
So sad...
trident aegis
First, this case is on sale at Amazon for $10 including shipping!!
I am impressed with the quality and feel. This origionally sold for around $35 and you get what you pay for. It comes with a screen protector (a dry one) also a covering for the camera lens. I have a plastic plug for the earphone jack I got off ebay for $1.
This is a hard polycarbonite case, not the soft flimsy type, and it is thin yet sturdy and feels and looks great. So far I love it.
If you place your thumb on the center back logo when opening, it opens easily.
If I find any problems or any disappointments I'll post here. But for $10 you can't go wrong.
I'm sorry to hear about your bad experince with the case but so glad you are telling about.
There seems to be mixed thoughts on the case. Decided to get the seidio surface as I only hear positive feedback on this.
CK
Yeah mine broke at the hinge after a couple of weeks too.
best case
I've had almost every case made for the Atrix. The Aegis is by far definitely my favorite because it is small, neat, nice materials, feels good, looks great. Yes the hinge is a bit delicate, but if you CAREFULLY open the case you can avoid breaking the hinge. And even if you break it you can still use the case depending on how bad it breaks. The case is made from a hard polycarbonite material, not a soft rubbery silicone which I got very tired of over time. These cases are on sale on Amazon for $10, down from the regular $30.....cheap. I bought 2 of them just in case. Comes with a dry screen protector and a cleaning micro fiber cloth. Also comes with a camera lens cover but that added fog to the picture when using the flash so I don't use that. This case put new life into my Atrix so I am happy for the time being. I bought silicon covers for the ports off Ebay for a few bucks to keep out dust. Anyway just my opinion on things.
Alright so I ordered this clear flexicase ages ago and it has arrived (finally). I wanted to do an unboxing and review. Let every (potential) buyer know my experience so I made this little video, my results and experiences may not be yours but overall the case feels good in the hand, any way. Here is the video:
https://youtu.be/8T3lRl1QKLA
Go ahead and like, comment, subscribe because I got more content, more cases and some comparisons. Also come back here and let me know everyone else's experiences and thoughts.
More content coming your way:
Spigen unboxing and review
Folio cases, wallet/credit card cases
Tempered glass review and application process
Rhino shield unboxing and review
More Orzly cases (of course) and
Some miscellaneous generic cases reviews and comparisons...
...So stay tuned
P.S. I unintentionally jacked @DarkExistence's thread so he'll probably be in here purposely talking about off topic jargon to get back at me, it's cool cool
Quick update on Spigen cases
So Spigen tweeted this pic, and said later on in July. I mean, we're already half way through but.. ok. But I can't even preorder this so there's that. I'll keep updating
BoiBundy said:
So Spigen tweeted this pic, and said later on in July. I mean, we're already half way through but.. ok. But I can't even preorder this so there's that. I'll keep updating
Click to expand...
Click to collapse
I wish Spigen would release a hybrid case for OP5 like they did for the Nexus 6. A clear hard plastic back with solid color TPU edges. It was great because the case never discolored like these stupid clear TPU cases we get today.
biglilsteve said:
I wish Spigen would release a hybrid case for OP5 like they did for the Nexus 6. A clear hard plastic back with solid color TPU edges. It was great because the case never discolored like these stupid clear TPU cases we get today.
Click to expand...
Click to collapse
I mean it's still early in the OnePlus 5 lifespan, that's why it's like tryna pull teeth to find a good case. Hopefully tho we see some good cases. I actually have that one you're talking about for the N6 it's a two part case, with the solid colored tpu and plastic that slides over it I accidentally snapped a piece of the plastic tryna take it off and now it doesn't fit properly
BoiBundy said:
I mean it's still early in the OnePlus 5 lifespan, that's why it's like tryna pull teeth to find a good case. Hopefully tho we see some good cases. I actually have that one you're talking about for the N6 it's a two part case, with the solid colored tpu and plastic that slides over it I accidentally snapped a piece of the plastic tryna take it off and now it doesn't fit properly
Click to expand...
Click to collapse
Oh yeah? That surprises me. I kept that case on my N6 for two years and it was solid. I guess you got unlucky.
But yeah I don't have much confidence in that case making its way to OP5 because it never was released for OP3. They only released a version with clear TPU edges which will still discolor.
Sent from my ONEPLUS A5000 using Tapatalk
SInce I was tagged, just wanted to say I had a great experience with my clear flexicase . All ports lined up, alert slider slot is great, bottom ports are perfect.., as you can see in my thread here! Also received my matte black flexicase today and man, it has a soft touch feeling that is just so nice, a nice little rim around the back and a great rim around the camera!
DarkExistence said:
SInce I was tagged, just wanted to say I had a great experience with my clear flexicase . All ports lined up, alert slider slot is great, bottom ports are perfect.., as you can see in my thread here! Also received my matte black flexicase today and man, it has a soft touch feeling that is just so nice, a nice little rim around the back and a great rim around the camera!
Click to expand...
Click to collapse
Yo could you take a photo of the two side by side, cuz I can't find that black one and I wanna see how that clear flexicase is supposed to look
I've got the Clear flexi case and my brother has one of the solid colour flexi cases. They are really solid case and can't go that wrong with it. Just got my Orzly wallet case and it seems like they are just using the flexi case as the holder in the wallet which is a great thing!
BoiBundy said:
Yo could you take a photo of the two side by side, cuz I can't find that black one and I wanna see how that clear flexicase is supposed to look
Click to expand...
Click to collapse
Hey man,
Yeah sure will do when I have both of them in hand again in a few days
I prefer the coloured flexicases atm, they feel great, have great camera protection and a really nice screen lip