Rom: 1.72.841.0
Radio: 2.05.51.11
how can I flash my radio to 2.08 or 2.10.
and also give me some compatible android links... Plzz!!!
run hspl3 - choose 2.08.hspl - flash any radio you like.
Re: android, cant help, managed to boot it for the first time yesterday, and had to hard reset as soon as i rebooted (Sense wouldnt restart)
Related
if im in the us where can i find this version to down load it. i cant track it down on htc support.
spl comes as part of stock roms.
assuming you have a tmous?
if so, any rom that includes 1.42.0000 spl will brick your phone permanently.
care to give more detail what you are trying to achieve, including your phone model?
i have the htc hd2
screen after teh volume reset is
PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
its how i have it since i bought it i havent done the update that has been released by t-mobile yet. Id like to get it to where i can flash other roms on it but its at 2.10.0000 and of course wehn i run the program to put HSPL on there it tells me i need first SPL 1.42.0000. any advice would help
i think there are different hspl designed for each spl is
okay, take carefull note of this
you have a 'tmous' or 't mobile us' version of the hd2.
This is important, you WILL kill your phone if you try to flash ANY official rom other than those for the tmous.
You don't need spl 1.42.0000, you need spl 2.08.0000, and that will allow you to use hspl1024 (see in my sig)
go to '[ROM]Leo 1.5 T-MOBILE Test & Stock ROMS' thread in the tmous rom development thread,
find and download rom 2.10.0
connect to usb, run the .exe, let it install, and voila, , , your spl is now 2.08.0000 and hspl1024 will now work.
You are currently in the regular hd2 section, you do not have a regular hd2, you should bookmark THIS and do all your rom finding, etc. there.
Apps, and themes from teh regular hd2 section will work fine on your tmous, but not roms, and especially not radios.
When picking a rom, be sure that the chef has marked it as 'tmous compatible'. If you aren't sure, don't bother.
all is good
i think i made a huge mistake..anyway i'm a noob (still)...so this is my story:
i flashed succesfully wp7 on my hd2 ..so i didn't liked it and i decided to go back on wm6.5 and flashed with a stock rom with 1.42 spl...
now i'm trying again to flash hspl so i can have a cooked rom like before but it gives me an error...it says that i need spl 1.42 in order to do that...but when i flashed the stock rom the spl remained 2.08 and it looks like this:
spl-2.08.hspl 8g XE
cotulla HSPL 0x05 0x40
can anyone help me?
now i made it with hspl2. i have spl 1.42 hspl but i can't flash a custom rom or radio :error code 240?
fix robotic voice running android 2.2 via sd card.
running andriod 2.2 via sd seemed to work ok apart from the robotic voice during calls i'm led to believe that you need to change the radio version which opened up whole new kettle of fish
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Can anyone shed any light on how this is done without bricking the phone permanently? or is there a better way to ultimately run android 2.2 from the sd card.
current spec
os 5.2.21913
rom 3.14.405.2
radio 2.15.50.14
spl -3.03.0000
any feedback much appreciated.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 which works with any spl.
barryhd2 said:
Tried to install HSPL, which it wont because it requires spl version 1.42 to install HSPL
Click to expand...
Click to collapse
that version of hspl went out of date ten months ago. use hspl2 (download from teh same hspl thread, the link directly underneath the one you downloaded.) which works with any spl except 3.03.0000
Morning,
I have a T-mobile HD2 I used the HARDspl 2.8 and I'm unable to return my device to the OEM SPL...
I tried copying the file to my card, renaming it to LEOIMG.nbh however the device will only flash the gray screen and return to the rainbow screen... Any advise?
Regards,
run hspl3 choose 2.08.0000
thats stock
If you want to go up to 2.10 (no real need. but its nice to match if you have the 2.13 rom) then remove hspl first as above, then run the 2.13 rom flash over usb
I was able to get it to revert to 2.08.0000, but I believed it was 2.10 or 3.10 after the TMO update to 3.14. Heck I have no idea and to be honest, this is the west my phone has worked since I first purchased it! LOL
it should be stock spl 3.03 now, and it works! winner.
i've done a gold card and flashed my phone with a official 3.14 leo rom, havent got hspl anymore, android works fine but i am unable to flash a cooked rom, tried usb and gold card but both ways stop at 0%, does anyone know whats going on? thx
spl 3.03........
(WWE) 3.14.405.2
Radio: 2.15.50.14
Manila: 2.5
the batery life improved without hspl
hspl doesn't work on spl3 and goldcard is for official ROMs.
you must downgrade to a 1.x rom (as normal if it is your correct stock rom, goldcard if its any other stock rom)
this will downgrade your spl and let you flash hspl.
thanks, think i'm going to keep spl3, my phone has never been working so fine, i was just trying to find a way to use a cooked rom with spl3. was using hspl for all this time and battery run out in 12 hrs.. now, my hd2 is running android mdeejay froyo revolution all the time, no freezes, good data connection..
So the short version of the beginning of the story, my phone became radio blocked after I HSPL3 before upgrading to a better radio. I followed these instruction to get it back to the shipped ROM.
The problem......I am at the end of the instructions where it is back to the test ROM that the OP states in the above linked thread:
RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15 .29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
It turns on normally and works, but it is SPL-2.00.1000 and it will only allow me to go up to SPL-2.02, buit not above that. (So I cannot load my shipped rom) When I try to do any ROM above that it get's me stuck at the Loading Screen or if on the comp it gets stuck at 0%
I am TMOUS and I have looked all over this website a thousand times and can't find any answers.......This is not my first round with the HD2 as I used this website to HSPL3 my other one run Energy rom and macfroyo 1.8.
Any help is appreciated...
Can you not flash the 2.03 or 2.05 ROM? Just to reiterate though.
Do not flash the 2.01 ROM from that thread as it will brick your HD2.
It let me flash 2.03 but not 2.05
rupert42 said:
It let me flash 2.03 but not 2.05
Click to expand...
Click to collapse
What SPL does that rom have with it? Go to bootloader to see what SPL you have after you flash the 2.03 ROM.
After I flash the 2.03 it says 2.02.0000
rupert42 said:
After I flash the 2.03 it says 2.02.0000
Click to expand...
Click to collapse
Ok you still do not have a SPL version that you can flash HSPL with. So do this I know you said it will not let you flash the 2.05 ROM so go to the 2.07 ROM and flash it, if it will ledt you flash that ROM check your SPL. If it is not a SPL that is in the list I posted below then move to the very next ROM wich is 2.09 and then check the SPL after flashing it. Keep doing this until you flash a ROM that gives you one of the SPLs in the list below then you can flash HSPL and then flash a custom ROM or the official update ROM from T-Mobile.
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
Okay, so I have tried every ROM and every one of them except 2.02 and 2.03 get stuck at the loading screen.
In the list of roms in that thread, the last entry in the list is hspl edited to work with spl 2.0 did you try that yet?
Sam is talking about this ROM "HSPL with MFG SPL 2.00 support" in that thread.
Okay so I was able to flash the HSPL on the 2.02 and then got it to the most recent update for TMOUS. I then put energy ROM on there and MattcFroyo1.8 desire android on there. This is the same exact set-up on my other HD2, but I am now having trouble with getting the phone to be consistant. I was able to boot the ENRG and Froyo, but after 10-20 minutes it froze. I can get ENRG to boot most the the time, but other times it comes to the boot screen and freezes, or it will come to the boot screen and vibrate 3x's and freeze. Not sure what to do at this point.
rupert42 said:
Okay so I was able to flash the HSPL on the 2.02 and then got it to the most recent update for TMOUS. I then put energy ROM on there and MattcFroyo1.8 desire android on there. This is the same exact set-up on my other HD2, but I am now having trouble with getting the phone to be consistant. I was able to boot the ENRG and Froyo, but after 10-20 minutes it froze. I can get ENRG to boot most the the time, but other times it comes to the boot screen and freezes, or it will come to the boot screen and vibrate 3x's and freeze. Not sure what to do at this point.
Click to expand...
Click to collapse
The three vibrations is not a good sign, it is a sign that something in the hard ware is malfunctioning.
Hi guys,
I need a support i have installed rom version 3.14.468.2 (with spl 2.08) from official htc site but unfortunetely my windows mobile 6.5 camera doesnt work properly(errors such as not enough memory) in order to recover itself i have to rebbot the device. Can anyone help me which version of Rom i should install.
Thanks
Oytun
Is the SPL 2.08.0000 what was flashed with the 3.14.468.2 ROM? If not hou may need to upgrade hour SPL to SPL 3.03.0000 as I am pretty sure you have a EU HD2 with 512 MB of ROM space. Also what radio version do you have as the radio will affect your camera as well? You should have radio 2.14.50.02 or radio 2.15.50.14 seeing as you flashed the ROM you flashed.
Its the spl, 3.x roms fall apart without spl 3.03.xxxx on regular hd2s.
Into bootloader, USB, run hspl4 and choose 3.03.0000 or 3.03.hspl and reboot, and all should be fine.