Just wondering if this is working on our devices? its working on the desire now
h t t p: / /forum.xda-developers.com/showthread.php?t=772795
and if so what steps do we need to take to get it working? thanks guys.
According to a discussion on a different forum, a few people have tried this on the Eris but it fails to flash. So still waiting on our phone, sadly they don't list the Eris on their compatibility list. They do list the HTC Hero but I'm not sure if they use the same USB Controller or not. Someone far more educated in this field can help with that.
Googling around a little pulled up a few discussions that appeared to indicate that the eris is a compatible usb controller. But I tried flashing it (one KayosFroyo v32) and as mentioned I get a error during flash... Hopefully someone can get it working.
What exactly is this?
coffindancer said:
Just wondering if this is working on our devices? its working on the desire now
h t t p: / /forum.xda-developers.com/showthread.php?t=772795
and if so what steps do we need to take to get it working? thanks guys.
Click to expand...
Click to collapse
According to the PSFreedom compatibility chart development for the Eris is "In Progress." It appears that a custom kernel will have to be built to support the exploit, presumably not too difficult.
coffindancer said:
Just wondering if this is working on our devices? its working on the desire now
h t t p: / /forum.xda-developers.com/showthread.php?t=772795
and if so what steps do we need to take to get it working? thanks guys.
Click to expand...
Click to collapse
well from what i read from the github tracker @ http://github.com/kakaroto/PSFreedom
he says: This linux kernel module should work on the N900 (RX51 machine).
It uses the musb driver to access the address of the usb and modify it.
If you want to port this, have a look at psfreedom_machine.c and implement the
missing functions for your device. Make it compile-time #ifdef and modify
the Makefile.
To compile, type 'make' inside scratchbox.
dont know how to do this just hoping this will help someone with porting it
UPDATE: just found a small how-to on how to port it if anyone understands this and/or how to do it all ps3+eris owners will forever be in your debt
Q: How can I port it to a new device.
A: Well, first, you need to figure out what controller your device uses, in the case of the N900, it’s ‘musb’..
Then go to the driver code for that controller (probably in drivers/usb/gadget) and look for ‘SET_ADDRESS’. In the case of musb, it was in drivers/usb/musb/musb_gadget_ep0.c. In there it was setting the address to the USB device, so just copy that code into the psfreedom_machine.c to allow setting the address, and add a similar function to be able to retreive the address.
Then add a function to return 0 or 1 depending on whether the controller supports HIGH, FULL or LOW speed mode (go to usb_gadget_register_driver for your controller, and in the first lines, it should validate the speed argument, it will tell you which ones are acceptable), set LOW speed mode to return TRUE only if FULL speed isn’t available .
Finally, add a function to return the endpoint names.. it will usually be something like ‘epXin’ and ‘epXout’ (where X is the endpoint number), or “epXin-bulk”, etc.. look at how the driver initializes its endpoints or grep for “->name” in the file to find where it sets it…
Edit: the controller the eris uses is MSM72K
any new developments on this? i see it's now listed on the PSfreedom compatibility list as in progress.
h t t p://psfreedom.com/wiki/index.php?title=Device_compatibility_list
As of this morning the website psfreedom.com is not available as well as the link for the chart is broken. I did many tests with my eris, using a CM6 Froyo rom to Other roms that were ported from other phones with different pse-enable zips. The best I was able to get to was the boot screen with the 3 skateboard androids. That setup was a CM6 2.2 rom with the zip files for the HTC Wildfire. Every other setup the zip failed to flash thru recovery. Thats the best I got so far.
EDIT
cant sleep so I tried to get onto psfreedom website and it is back up. It has been ported to the motorla droid. hopefully soon we will be so lucky
posted in another thread but here it is again.
I dont think we will be seeing this on the eris for sometime as the USB driver used is actually the msm_hsusb driver. This was verified last night when i was in #psfreedom where someone was trying to get psfreedom on an eris and kept running into a problem and it turned out to be because of the msm_husb driver was in use. so until that msm_husb driver is working with psfreedom we are probably SOL.
This is now working on the Eris i tested it for the dev waiting for him to officially release it should be this afternoon.
If what your saying is true I will name my children after you and the dev LOL
Sent from my Eris using XDA App
For the love of humanity don't.
Any way you can list what you did try and where I can get the files needed to try this myself... maybe with instructions on how? I very much want to try this and have been patiently waiting for days now.
http://psfreedom.com/wiki/Device_compatibility_list
have fun guys all credit goes to the Dev rgov and the other devs working on psfreedom
I've carefully read the directions on the PSFreedom Wiki site for Droid Eris. My first question is this:
How can I achieve S-off in the bootloader? My Eris is rooted and I am currently running KaosFroyo v34. When I reboot to bootloader, it shows S-on and I cannot fastboot.
yeah i had the same exact issue that's why i made the note in the wiki. i essentially had to go through and redo the root following jcases post here.
hope it's not against the rules to link this......
http://androidforums.com/eris-all-things-root/121597-how-install-engineering-bootloader.html
Trying now... will keep you updated. Thank you.
Question: Since my phone is already rooted, do I just start at step 6 and flash PB00IMG.zip? To be honest, these directions are kinda confusing to me. I tried this method months ago and was never able to fastboot... maybe I am doing something wrong. coffindancer, I appreciate any and all help you are providing and hopefully you can assist me in getting this PSFreedom up and running.
i think you can start with PB00IMG.ZIP and it will go ahead and reflash the boot loader so it's S-OFF im not positive though. Im a freak and just followed the steps pretty much step by step maybe someone with more experience can explain it better.
So even though you were already rooted, did you still flash the engtools.zip? Or did you skip step 2?
skipped step 2 i believe.
also the dev is redoing the wiki so if you don't see the link for the files just be patient.
Related
Hey Xda-developers. Just quickly, I found this Forum from a few links on other websites (gizmodo, engadget) and some youtube videos of your awesome custom ROMs.
I for my HTC Hero in March, and I should be upgrading around christmas 2011. That's a while, and Android grows fast..much much faster than HTC update my device, so I'm thinking a custom ROM is what I really want.
I've done my research, but honestly I'm pretty much a noob here. I know I need to root the phone, but I've been unable to find any specific instructions for 3 UK, and as far as I can tell all the different carriers use different instructions (a different ROM to downgrade to?), so I don't want to use the wrong ones.
-
Phone Spec
Okay, this is a standard HTC Hero on a 24 month contract carried by 3 UK.
There has been no rooting, no major changes. I have done no more than officially supported. A complete from scratch root would be required.
Currently running 1.5.
UK, 3 Mobile, GSM.
No hardware replacements and no known issues with the phone.
-
I think that's about all, is somebody here able to point me to the right place for a 3 mobile root?
Thanks in Advance,
Callum.
I'm also on 3uk and i rooted my phone using the following guide:
http://androidforums.com/all-things-root-hero/54802-how-root-install-custom-rom-backup-more.html
Hope this helps.
Thankyou very much for your help! I'll be giving that guide a go later.
No probably m8, SenseHERO is a good custom ROM.
Any trouble just post up and ill try and help you out.
Hmm, if I could ask you to take a look at a post, that'd be really helpful. No worries if you don't have a clue though.
Hero, G2 Touch Android Development >
[Guide] Complete Newbie Guide to Install a Custom Rom & Newbie FaQ [Updated 02/05] >
Page 33, Post 1.
Sorry that link is so bad, but they won't let me post a proper one.
That thread was alternative 2 for the 3uk guide you gave me (goldcard section). I'm not sure whether you'll be able to help me, but if you could take a look that'd be massively helpful.
Cheers,
Callum.
I posted a reply to more or less the same problem earlier.
http://forum.xda-developers.com/showpost.php?p=6701261&postcount=268
Let me know how you get on.
Thankyou very much for your reply, but I have already done all of this. I've successfully performed a goldcard on my SD and I'm really close to getting a working custom ROM, but it's dying somewhere there. I have already installed the x64 drivers though.
HTC Sync works perfectly, picking up the phone and synchronizing on demand.
Thanks,
Callum.
What guide are you using, i used this was one to create a goldcard and downgrade:
http://forum.xda-developers.com/showpost.php?p=5855697&postcount=1
The only problem i had was syncing after installing the latest version. I fixed it by downloading a driver manager and updated the drivers for it.
I take it it lets you mount the SD card on your computer?
One thing that might be worth a try is to download the ROM again, it might be corrupt, a shot in the dark but worth a go.
That's the guide I ended up at, after following a link within the guide you provided above.
It does indeed allow me to mount the SD card, everything syncs perfectly. I'll give re-downloading the ROM a go, though. There was two available, so I'll try the other download.
Hmm, I've tried everything I can think of, and nothing is working on this Windows 7 machine. My brother's XP machine is broken, and my dad's away with the XP notebook.
Is there any way that anybody knows of to run XP as a virtual machine temporarily?
Here's a link for a virtual box:
http://www.virtualbox.org/wiki/VirtualBox
I dont know how to run it though.
Someone had a similar problem on win7 yesterday and sorted it by getting a new gold card. Might be worth a try?
Aha, I re-downloaded goldcard, and switched the driver to My HTC once with it normally plugged in, then with bootloader open. And it downgraded!
I've got the Scenehero on the SD card now, I'm just unable to launch the custom recovery screen. It will start normally by hitting power, but while the home button is also held it just loops the first hero screen. Is there any way past that, because I need to perform a wipe and flash scenehero.
Thanks so much for your help so far, you've been amazing!
If your all set up properley you should be able to connect your phone via usb to the PC,
then open a command window and type>"adb shell devices"
your phone should show in the window something like HTLK12345
now type> "adb shell reboot recovery"
this should boot your phone into recovery mode.
Hope this helps.
Thankyou very much for your help, I solved the problem by re-installing my recovery. Not sure what went wrong but it worked after that. All looks good now!
good stuff m8, glad your sorted.
what rom are you running?
I'm currently using the latest version of Sensehero. Really pleased with it so far.
I'm on branch 3, waiting for branch 5, should be here soon hopefully.
If you have'nt already m8 check out the site:
http://www.htcdevscene.co.uk/
Some top lads over there having a good time!!.
Hey All
I have a requirement for setting up a dual boot on the HTC Hero using the SD Card for the 2nd OS.
I've looked around and have come across the Dual Booting for the Windows Mobile and Android on the HTC HD2 and was hoping somebody might be able to point me in the right direction archiving this on an Hero.
I'm not looking to run both OS at the same time, ie not running Ubuntu/Debian via a loop device.
So if anyone knows of any good guides for editing the Boot.img, i thinking that where the magic gonna happen, i might be wrong, please i would very much like to hear from you.
Many Thanks
c0mput3
ubuntu in its present form simply will not run. cmd based linux is a possibility for many mobile devices, as has been prooved by cmd linux on iphone os.
I wouldnt know about how to go about this though.
Speak to kendon over on Villainrom forums.I think hes probably the one to talk to as im sure he said ubuntu is possible
Many thanks Bonesy, checking that now. =)
Status?
... and what was the end result?
There is a thread on the villianrom forum for running ubuntu/debian alongside android though I'm still waiting for a new SD card before I try it. I would link but its still down, any ETAs for it being back up yet, I understand it might take a while?
Hi there,
I've recently dove into ROM Development for my Evo due to a weird issue that I'm seeing on my device. This issue is also seen on many other devices from tablets to the nexus one. I seem to be one of the only few that's seeing it on the Evo, and the general community doesn't have enough knowledge to assist. I'm hoping someone will know some ideas to try from a cooking standpoint to see if I can fix this for my particular situation and maybe help out the others that are grasping for a fix from Google and aren't getting one.
In my situation, ADB ONLY works on the initial base release of FroYo from Sprint with regards to HTC Sense-based roms. When Sprint released their second updated base, 3.28.651.1, ADB was/is broken. I can get ADB to work in Recovery as well as ANY AOSP rom, so I'm thinking the culprit might be the Kernel (g3a8614e and onwards) and/or the base version.
USB Debugging does not work because the ADBD process is not running. See this Google bug for what the Nexus users are seeing:
http://code.google.com/p/android/issues/detail?id=9437
I'm very knowledgeable, and have tried so many rom and kernel combos it's disgusting YES, I've turned on USB Debugging. the ADBD process does not run, and throws a segmentation fault whenever you try to start it. I've checked my properties file to make sure the service.persist is enabled, yada yada.
I've torn apart the kernel from that initial release and paired it with a later base. The ADBD process then runs, but ADB still doesn't work. I've also, like other users in that link, have pulled out an ADBD process from the working one, and that also does not work, although it too makes the ADBD process function again inside the ROM.
So my questions are:
Can anyone explain what might be causing the ADBD process to be blocked? There's not much documentation out there on it. What part of the ROM build controls all of that? My initial thought was the boot.img, and I've messed around with that, diff'ing an older working ROM with a newer one to no avail.
Can anyone suggest something to try, or a technique to frankenstein something that might work? I'm an Android dev, and I can't put my in process app on my phone and test it because ADB simply doesn't work. My app uses the camera, so I need my phone instead of the emulator. I'd rather not flash an old rom or AOSP rom, because I'm really trying to figure out what's going on!!!
Thank you so much in advance for any assistance you can provide. If you can help me figure this out, I'll gladly send you a donation!
BTW, this subforum is amazing! I stumbled onto it looking for a better way to pack and unpack boot images.
Hello,
Just purchased this phone and would like a root in order to expand its storage. It's a new offering from TracFone and is limited for on-phone storage. Other than that, it's a fairly decent phone considering it is a TF. I searched the forums and found other similar phones, but none matched this one. If someone would be willing to help, you would get a lot of thanks from TF users who bought this phone.
MiMtnBiker said:
Hello,
Just purchased this phone and would like a root in order to expand its storage. It's a new offering from TracFone and is limited for on-phone storage. Other than that, it's a fairly decent phone considering it is a TF. I searched the forums and found other similar phones, but none matched this one. If someone would be willing to help, you would get a lot of thanks from TF users who bought this phone.
Click to expand...
Click to collapse
If you have PC follow these:
Try to download "kingo android" in your pc
then connect your device to pc via USB cable
open kingo android and start
If you dont have a pc and you have recovery mode in your device follow these:
search this: root (your device name) .zip file
and if you are successful put that zip file on root folder(the folder you see when you open your built-in file manager)
switch your phone to recovery mode
volume up, volume down, and menu button are the controls
navigate it to "apply update"
then choose your the zip file
If you dont have a pc and dont have a recovery mode follow these:
download "framaroot" "rootmaster" all apk
Hope it helps
cedie said:
If you have PC follow these:
Try to download "kingo android" in your pc
then connect your device to pc via USB cable
open kingo android and start
If you dont have a pc and you have recovery mode in your device follow these:
search this: root (your device name) .zip file
and if you are successful put that zip file on root folder(the folder you see when you open your built-in file manager)
switch your phone to recovery mode
volume up, volume down, and menu button are the controls
navigate it to "apply update"
then choose your the zip file
If you dont have a pc and dont have a recovery mode follow these:
download "framaroot" "rootmaster" all apk
Hope it helps
Click to expand...
Click to collapse
Thank you for your suggestions. I have tried several of the one-click methods for root (Kingo, Genius, towelroot, framaroot, etc.). All of which have been unsuccessful. Obviously, there is no rom available for this phone. If anyone has any other info, I would really appreciate it.
Expand Memory
I got the same phone same problem while i didnt find a root for it i found out how to install to sd very useful
go to google and type in how to install apps to sd card no root then click on the link for instructables i cannot post link because im a new user worked for me
would really appreciate a root method if anyone has one the storage issue is really annoying -_-
I realize this is an older thread, but I have devised a fully working root strategy for the Alcatel A564C. If anyone is interested let me know. If there is any interest I'll start a root thread for this device.
MotoJunkie01 said:
I realize this is an older thread, but I have devised a fully working root strategy for the Alcatel A564C. If anyone is interested let me know. If there is any interest I'll start a root thread for this device.
Click to expand...
Click to collapse
Hi MotoJunkie01. I saw your post today, and I just got an Alcatel A564C from TracFone. I would be very interested in rooting this device, since the accessible internal memory is so small it makes it almost unusable. Please open a root thread for this device if you feel there is enough interest. Or, if you would be willing, just send me a PM with the instructions. I have been able to gain temporary root permissions on this device using KingRoot, but they go away with every reboot. Also, I have not found any way to unlock the bootloader. Any help would be greatly appreciated. Thanks!
jp2006 said:
Hi MotoJunkie01. I saw your post today, and I just got an Alcatel A564C from TracFone. I would be very interested in rooting this device, since the accessible internal memory is so small it makes it almost unusable. Please open a root thread for this device if you feel there is enough interest. Or, if you would be willing, just send me a PM with the instructions. I have been able to gain temporary root permissions on this device using KingRoot, but they go away with every reboot. Also, I have not found any way to unlock the bootloader. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
I'll get a thread and a guide posted on rooting the A564C. I've had some PMs with interest as well. I'll post the link here once done.
MotoJunkie, fellow R.F. guy here, I have been browsing this site for well over a year and just signed up in fact this is my first post. I was following your information on the LG zone 3 as well. I own a brand new in the box A564C and just can't get it rooted. I too, tried different ways and actually was able to get temp root once with kingroot when the phone was really lagged out for some reason I had root until reboot. But now every version of kingroot that I run comes back with a network error which is strange and didn't used to happen. So please, let us know what you have found out. I am eager to hear back from you. And, thank you so very much for your willingness to share your knowledge.
Just checking back in, to see if any advancements or progress has been made. I'm excited about finally rooting this device and anxiously waiting.
MotoJunkie01 said:
I'll get a thread and a guide posted on rooting the A564C. I've had some PMs with interest as well. I'll post the link here once done.
Click to expand...
Click to collapse
I'm getting a thread started, as well as threads for other various devices. I know you're anxious, but please be mindful that XDA rules prohibit asking for ETAs and such. It's not that I particularly mind, I just don't want to see you sanctioned for rule violations by a moderator.
A couple of things, I I may....
First of all, aside from the rules (not that I'm saying that I don't respect them, I do but at the same time want you to know what I'm about to say is genuine and not out of fear of getting booted off the forum) I want to personally apologize if I came off as asking for an ETA or came off as rude or unappreciative in any way, shape or form. That was not my intent at all, and rather than PM you I wanted to publicly say that I am sorry for that and to let you know as I previously mentioned how much I enjoy reading your posts and am thankful for your willingness to share your knowledge. With that said I won't get off subject or topic again. I just felt that I needed you to know that I was just excited that someone had it figured out is all and I will pay closer attention on how I come across from now on. Take care.
JustinJay said:
A couple of things, I I may....
First of all, aside from the rules (not that I'm saying that I don't respect them, I do but at the same time want you to know what I'm about to say is genuine and not out of fear of getting booted off the forum) I want to personally apologize if I came off as asking for an ETA or came off as rude or unappreciative in any way, shape or form. That was not my intent at all, and rather than PM you I wanted to publicly say that I am sorry for that and to let you know as I previously mentioned how much I enjoy reading your posts and am thankful for your willingness to share your knowledge. With that said I won't get off subject or topic again. I just felt that I needed you to know that I was just excited that someone had it figured out is all and I will pay closer attention on how I come across from now on. Take care.
Click to expand...
Click to collapse
You're are both respectful and courteous, qualities that are coveted and always welcome here at XDA. I didn't take any offense to your questions but I appreciate your kind words. On an update for this device, I'll be posting a root thread early this week coming -- Tuesday or Wednesday most likely. I have threads for this and at least 4 more devices I'll be posting.
Thanks again for your kind words. By the way I'll be posting the link to my thread here, so check early in the week.
I certainly will...thanks for your reply, and can't wait! I will keep checking back periodically. Thanks again!!
Update: I'm experiencing a boot loop on my own device from trying to flash custom recovery. Trying to get this snag worked out and get the tutorial posted. Sorry for delay.
Hey,..noooo problem on this end...again, just grateful you're both willing to work through the issues and obstacles as they come your way (and if it's anything like that happens to me they sometimes seem to come out of no where, just about when I think my task is complete) but also appreciative that you're willing to share. I would like to start a new thread, not to pile on your list of people bugging you about things already, but need to find the right section. It is more of an R.F. type related question with regards to the modems in the phones and weather the modulation techniques and bands capable are software driven like a software defined radio or more hardware dependent. I know as far as bands go the frequency coverage would have to depend on hardware all the way from the local oscillator to the RX strip to the TX PA as far as gain and linearity, duplexors of some type, antenna (s) being resonant at the middle of the desired band (s) but as far as modulation techniques being more software controlled somehow? Anyways, stuff that I am very interested in but haven't found a section??
MotoJunkie01 said:
Update: I'm experiencing a boot loop on my own device from trying to flash custom recovery. Trying to get this snag worked out and get the tutorial posted. Sorry for delay.
Click to expand...
Click to collapse
MotoJunkie01 - I'm curious to know if this boot loop issue has resulted in you stopping work on rooting this device? Although I am still interested in obtaining root on this phone, I'm cool either way. I'm just posting to see if you think obtaining root and posting a tutorial is still in the cards?
Thanks again for your work on this. I really do appreciate it.
I'm sorry guys. Upon trying to flash the device with a stock fir!mware image to fix the boot loop, my device is now hard bricked. I can tell you, in order to root your device, use the latest KingRoot apk. This will give you temp root only, meaning root will not survive a reboot. So, to gain permanent root, install BusyBox (any version should suffice), then download SuperSU-Me Pro from the Play Store (paid app). This will eradicate the KingRoot root binaries from your device and replace them with the latest version of SuperSU. You will then have full root.
To root Alcatel One Touch Pop Icon A564C with KitKat 4.4.2 TracFone, download KingRoot for pc in English from this site. It rooted on the 2nd run.
On the xda-developers forum, find the following:
android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
RAWilson100 said:
To root Alcatel One Touch Pop Icon A564C with KitKat 4.4.2 TracFone, download KingRoot for pc in English from this site. It rooted on the 2nd run.
On the xda-developers forum, find the following:
android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Click to expand...
Click to collapse
Hello.
I will thank you if this method would work on my phone, but I am unsure my root would be successful. I would appreciate the steps you took in order to root the A564C(such as time to root, USB debugging, etc.) and if you can post how your phone is doing since the root. I would be much thankful.
Hello XDA Forums,
I have been a guest on the website for a while now when looking for android knowledge and I usually grasp a good amount of whatever I am trying to accomplish. However, the issue I am currently having I feel is considered IMPOSSIBLE to fix and I want to confirm that by this community.
Phone: Blu
Model: NEO XL N110U
Android build version: 6.0
Custom build version (It’s a stock a downloaded, ill explain in a sec)” BLU_N110U_V10_GENERIC_MARSHMALLOW 05-08-2016 16:30
What happened is that about a year ago or so I updated the android version from lollipop to marshmallow using the OTA update (which is the wireless update). Worst decision ever as I found out that this update gave me 4 specific viruses that sends my information over to a Chinese server. Here are links on the virus:
https://www.droid-life.com/2016/11/15/blu-security/
https://blog.malwarebytes.com/cybercrime/2016/11/mobile-menace-monday-adups-old-and-new/
https://android.gadgethacks.com/new...be-affected-by-adups-chinese-spyware-0175014/
With this problem, I thought “I can just root my device and delete the files… right”? I never rooted a device before, but I have jail broken iphones, modded psps, and ds so I felt like this would be easy……Turns out its impossible if you already updated to that wireless update with marshellow. I also tried unlocking bootloader and that failed super hard as well! Here is what I tried:
1. Tried Kingroot app – failed
2. Tried kingroot on pC – failed
3. Went into developer options and enabled usb debugging and oem unlocking to TRY and unlock the bootloader. – that part worked……HOWEVER
4. Went into the recovery and choice reboot to bootloader. Then connected my Blu phone to my PC, went into Command prompt and typed, “fastboot oem unlock” (I believe I had to download fastboot and adb tools first). – This was painful for me. It gave me the option to unlock the bootloader using the up and down volume buttons. I need to press “Volume up” on my phone to confirm the OEM unlock……..HOWEVER THAT HAS BEEN COMPLETELY DISABLED. The buttons work, but when I need to confirm the oem unlock, it doesn’t allow me to do this. THIS I BELIEVE HAS BEEN PURPOSELY DONE.
5. I downloaded a stock version of my phone’s rom but at a lower android number (5.1) and tried to flash it to the phone using SP Flash tools. – Failed. It would stay illuminated black and the intro sound would come on but I wouldn’t see anything. I looked into that and I believe that is because there is something called version binding where if I update the version build, I can’t downgrade to use the same exploit.
6. Since the phone was bricked, I wanted to try to bring it back to life by downloading the stock rom for my phone at the same virus build version I’m at now and flash it to the phone. – It worked with viruses and all.
7. I Then thought, “Can’t I use open the rom file and delete the viruses I want, then flash it to the phone?” So I tried that by using mtk extractor which allowed me to open the system.img file for the stock rom which contains the android data. From there I went into the apps folder and deleted the 4 virus apps. Then I packaged the system.img back together into one file and then used that system.img when I used sp flash tool to flash the rom onto the phone. – It was stuck on the logo……I can still access the recovery fine and still doesn’t allow me to oem unlock.
This is where I have given up. At this point, I feel like I would need to learn more about the system.img file and what it looks for in the beginning. I just want to fool it into booting without those apps. I know there is something stopping it from booting because when I go into the recovery part and select the option to do a “root integrity check” it tells me those specific apps are missing. Is there any way to change the root integrity check to not look for those apps?
So I know this a lot of information but I need to write this down for all the steps I toke. I hope that this thread can help anyone with a Blu Neo XL device come to some information. If I can confirm from this forum that there is nothing that can be done. I feel then a law suit with Blu is in order and everyone should throw out there compromised phones. I have seen numerous other posts on this subject and so far NO ONE HAS ANSWERED EVEN ONCE. One pore guy had to keep bumping his thread of months until he gave up; atleast tell me its not possible! Here are the link I saw on this from here:
https://forum.xda-developers.com/android/help/tried-to-root-sort-blu-neo-xl-t3559702
Here are my main questions:
Is it possible to access the root (either via pc with command prompt or linux with terminal or even on the device itself) without rooting or unlocking the bootloader (since both seem to be impossible).
Can you extract a system.img file, modify it, then put it back to get together to flash it to a device without unlocking bootloader?
Infact can you modify any part of the rom or .imgs and flash it to spflash tools? (Or maybe I was doing wrong?)
Is there anyway to figure out how to modify the tamper bit if I have to find a way to get around the virus bug on my device that doesn’t allow me to use the “Volume up” button to confirm that I want to unlock the bootloader? (I’m not even sure if this phone has that, I just saw that for this oneplus and thought maybe it can be on all phones in a different way?) Here is a link on that-
https://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912
The goal is get rid of the virus that sends my data back to Chinese servers. Also, the goal is to get an answer from the community here to put this to rest.
If you need any information on this or want me to upload anything please let me know.
Thank you for your time!
Bump as I need hope.
I understand people may not have this phone but I need some sort of reply to confirm that this isn't possible. I want this thread to be the first post anyone sees if they type in "Blu Neo XL" for rooting purposes.
Even if anyone that has a phone that is similar that is affected, that would be anyone who has:
R1 HD
Energy X Plus 2
Studio Touch
Advance 4.0 L2
Neo XL
Energy Diamond
bump
Waited around for awhile but now its time be obnoxious. I will bump my other thread as well and just start hi-jacking other threads until mods ban me or someone answers me for once.
bump
bump
bump again and again and ****ing again!
another day, another bump
another day, another bump
another day, another bump
another day, another bump
another day, another bump
another day, another bump
another day, another bump
another day, another bump
Also, I got a Moto G5S Plus instead finally. It toke me awhile to save the money because I don't make much but atleast I have phone that isn't sending my data over to china.....or maybe it still is sending my data who knows where. Either way, Bump.
Hey man, I didnt read through your entire post. But can't you just downgrade the version to one that is possible to root?
Or you can also get another phone that does have root as an option. Also, I don't think you should bump your own threads. Just wait it out, or ask in other threads for help.
Edit: Oh Man, I didn't even notice someone responded to this! Awesome.
It says in the rules to ask here. So I decided to ask here espcially since this phone doesn't have its own dedicated forum. I got a new phone about a month ago and its pretty good so far.
This is more of a lost cause but I bring this up just in cause other people get affected. I believe the Blu company had to pay the Justice department for this so they got away with it and thats no big deal now of days. lol
erickkg said:
Hey man, I didnt read through your entire post. But can't you just downgrade the version to one that is possible to root?
.
Click to expand...
Click to collapse
Also for those of you out there suffering, the above statement is not possible because the newer versions of Android OS have "version binding" so downgrading to an OS that is lower that way you upgraded to wont allow the phone to get pass the bios or whatever the android bios recovery start name is. (I don't remember right now) Even if you mod the recovery or bios file.
So here it is almost a year later from you writing this post and I have found myself in the same predicament you were once in and was hoping there was answers somewhere, but from the looks of it I am guessing I'm better off just breaking this phone in half and getting myself a new, virus free, root-able phone. Am I correct?