Related
Hey all,
For some reason my speaker stopped working and I have no sound. I am using kaos froyo but I want to go back to the stock Rom before I have Verizon look at it, so they don't say I voided my warranty. Can I flash back to the stock? Where can I find the stock Rom at?
Sent from my FroyoEris using XDA App
Search return to factory stock. Theres a thread for it in the development section.
Sent from my VANILLA TAZZ using XDA App
You may want to try this:
FlashBack21 v1 - Return to Factory 2.1 Stock
I used the previous version for a similar reason and it worked like a charm.
My trackball has stopped working. Is there a way to flash this ROM with out using the trackball?
blackbrolly said:
My trackball has stopped working. Is there a way to flash this ROM with out using the trackball?
Click to expand...
Click to collapse
First, you ought to see if you can get the trackball to scroll up and down by inserting the USB cable and moving (the USB cable connector) around gently. If so, then just use the normal method with Amon_RA.
If that doesn't work, there is a method involving ADB and commands lines:
http://androidforums.com/eris-all-t...ng-rom-trackball-not-working.html#post1495912
If you do not understand 100% of the instructions in that post, I wouldn't do it. It really is a method for experts, not newbs.
Neither of the FlashBack ROMs will work with Clockwork, so using an alternate custom recovery won't work (with the FlashBack ROMs)
Another alternative is to perform the jcase "Flash any RUU" method manually (via adb), and after that install the "Official" RUU ( = Leak-V3 ). You won't get the July OTA, but it will certainly be "factory" software on your phone (if for instance your intent is to return your phone to VZW).
bftb0
bftb0
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
dev_man77 said:
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
Click to expand...
Click to collapse
If you are on Fusion 2.1, just use rom manager and install this using install from SD card option. You should be OK. If that does not help try ODIN.
Incase you are stuck and need to revert back to stock or want to take the long route just incase then use this file
Stock Rom
PIT File for ODIN
Thanks. I just tried it and everything seemed to have flashed over okay. I just didnt know if it was required to odin to stock first or not. Everything is working pretty good so far. gonna mess around with a few new kernels now.
Cant seem to get clockwork mod recovery to work
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
dev_man77 said:
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
Click to expand...
Click to collapse
Install Rom Manager from Market, Make sure you have Busy Box & Super user app. Launch rom Manager, Select Clockwork Recovery, Select your device from pop up window. Select Reboot to Clockwork Recovery menu. Phone will restart, select reinstall packages it will restart again and take you into Clockwork menu.
Tried this twice and it keeps taking me back to the stock recovery mode... Dont know why.
*edit*
Had to reinstall packages twice and it finally worked. Everything is gravy. Gonna see if the SuperIO kernel is better than the stock+Voodoo5...
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and then restart your current rom. After it finishes turn on development in the applications settings. Then reboot into recovery. Then install from update.apk this will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
rnj79 said:
I'm on 2.2 318 and am trying to go back to stock 1.6 but after extracting all the system files to the sd, completing the steps for that and flashing the new boot.img- I can't get my Streak to boot fully into Android to apply the 1.6 update.... If I try to boot it sticks at the Dell logo, no animation, just the logo with all 3 soft keys lit. If I go into Recovery and try to apply the update, I get a signature verification failure error. I also tried a factory reset from Recovery but cannot get passed the logo.
I have done this a trillion times before without any issues. Why won't it cooperate now? I have one of the temperamental Streaks that only likes Official Stock ROMs. I get FCs and freezes out the whazoo on anything but so thats why I am going to Stock AT&T 1.6 and update to their 2.2...
Click to expand...
Click to collapse
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
derechbennoach said:
http://forum.xda-developers.com/showthread.php?t=805112
I had Streakdroid 1.80.
Follow the directions above but only the last OC 1.6 to At&t 1.6
Make sure you have OEM recovery flashed. Streakmod etc wont work.
Put the 3 files on your current system. And the new rom on the SD.
Flash the boot.ing as instructed and reboot into recover. It will install the new AT&T rom. If if fails flash boot.img again and repeat.
FYI: the new 340 does not look any different then the 318 or 170 for that matter.
DJ's roms are better and faster. But if OEM is your desire do this.
Click to expand...
Click to collapse
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
derechbennoach said:
Try using the repair tool that will put a 2.2 rom on it.
You don't have to go to stock 1.6. Just follow the instructions on your current system and it will let the new AT&T 2.2 install. I always to a factory reset before installing a new rom. That stops FCs for me.
Click to expand...
Click to collapse
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I can't get mine to boot normal unless I use the QDL tool to pull it out of the logo screen. If we already have a US Basdeband we shouldn't have to upgrade to O2 and back down again, right?
What do the people, like myself, do who are on the 2.2 318 via QDL Tool build to get the AT&T 2.2 rom released yesterday?? I am already on a US AT&T rom so what sense does it make to have to upgrade to an O2 rom and go back to AT&T (I am thinking out loud...).
I don't want Steve's ROM or anything else... my phone does not play well with those. I want the new official 2.2 released to AT&T locked Streaks.
rnj79 said:
I do have a 2.2 rom installed already. I used the QDL tool to get it there so I shouldn't have to do it again... I tried updating to AT&T's new 2.2 yesterday from the 2.2 (318) I am currently on but it won't let me. I thought I had to go back down to 1.6 and get my update via notification but now my Streak wont get off the logo.
I hope this is making sense because from what you said, I don't think it does. Its hard to type what my problem is in a way that all can understand.
Click to expand...
Click to collapse
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
eugenekim618 said:
I am on Rogers and had the same problem. Was on 2.2 through QDL tool. I got an email from Rogers that their official 2.2 update was now available.
Downloaded the update, it wouldn't install.
Probably because baseband is different?
Anyway, did the same thing, tried downgrade back to O2's 1.6, then hopefully AT&T's 1.6, but got stuck after getting down to 2.1. Black screen during update.pkg, Dell logo only when just doing a normal boot.
Tried loading 1.6, 2.1 Rom's again to no avail.
Managed to get the phone working again using the QDL tool to get back to 2.2.
Tried doing the Rogers update again, but not working.
Help!
Click to expand...
Click to collapse
I finally bought root Explorer from the market. If there is a free alternative that can change your /system file to r/w (read/write) I could not find one.
You [email protected]!!!!!!!!! (no other alternative, dont think you are smarter than anybodye else, is non-negotiable) to move the 3 files over into your /system file, because the update will not go through. It says there is a "device mismatch" (or something like that). I tried to short circuit all the processes at every step and was unable to beat the system.
Heres what ya gotta do:
1. Follow the part about downgrading to 1.6, then check for software update.
If you have upgraded to ANY other version of 2.2 ya gotta move the 3 files over.
http://forum.xda-developers.com/show...92&postcount=4
Finally I gotta say that it is not worth all the fuss really. You lose tethering and installing outside apps. You gain nothing.
This release is best for djSteve, because he can take all the good parts of this build and put into his next release of streakdroid.
derechbennoach said:
There are three files that need to be in place. and a boot.img file that is installed from fastboot.
http://forum.xda-developers.com/showthread.php?t=805112
Look at what he says to do the the 1.6 non at&t rom and do that to any 2.2 and it worked.
But really 318 is that same thing. and Streakdroid 1.8.0 is 100% better.
Click to expand...
Click to collapse
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
I hosed mine to a black screen that would not turn on.
The repair tool would not get it going.
I found streakflash I tried to get a link, I'll keep looking.
I launched steakflash.
I pulled the battery put battery and back on. As I plugged in the cable I held the UP volume button. Streakflash recognised it and I ran it through.
That got me back up. I forget what ROM it was. I then ran repair tool.
That puts 2.2 pre release.
If I can do it anyone can.
rnj79 said:
I have done all that, many many times before and it has always worked but this time it isn't working. I have done the root explorer thing. My phone will not boot passed the logo after all the steps have been completed. I cannot figure out whats causing the problem. I have downgraded to US AT&T 1.6 several times in the past with the method you and everyone else state but this time I am getting nowhere.
Click to expand...
Click to collapse
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
derechbennoach said:
http://streakdroid.com/downloads/djsteve/
Use this I bricked mine and it fixed it.
Put it in diagnostic mode.
Battery out battery and back on.Start software.
Plug in cable holding up volume.
It saved mine.
Click to expand...
Click to collapse
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
rnj79 said:
Thats what I'm trying to say... the only way I can get out of the logo is by doing this. I am on the pre-release of 2.2 as of now but I want to downgrade to AT&T 1.6 and back to the new AT&T 2.2 rom but it wont cooperate with me. Whenever I try, I get the silly logo and have to use QDL to get me unstuck.
Click to expand...
Click to collapse
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
derechbennoach said:
Ok. Forget going to 1.6. Download the Rom and the files and. OTA won't work.
Follow the instructions and put the three files and the boot.ing on your 2.2 Rom.
Put the new update.pkg on the sd
Reboot recovery select to instal and it will install it.
I have done this twice.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
It will not work!! I keep getting the status 7 error which then sends it to reboot but never gets pass the logo! The only way to get out of the logo is to pull the battery and use QDL to put me back at 318.
Whats the malfunction with this? I have always managed to update in the past. Why won't this one go through?
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Same Problem
BigBopper said:
Hi -
Could you be more specific on "OEM recovery"?
I have downgraded from 318 all the way back to US OEM 1.6 with BB of 31 which matches OEM version. Build number 6601. btw: I had to do a Nandroid flash to get it to 1.6.
It downloads the 340 update fine but gets hung up on the install process - stuck on logo.
Seems like I need to flash the right recovery but I always get a blank screen when I boot into recovery and choose update from SD card.
Can you link me to the right recovery file?
Thanks.
Click to expand...
Click to collapse
I have the same problem with BigBopper too. Anyone have any idea to fix it?
vanemburghj said:
First off I did quick scan of this post so if I am repeating I apologize in advance. You MUST go back to AT&T 1.6 with no Streakmod or Clockwork need Dell recovery program. 340 does a scan as it loads and if finds you modified the Steak in anyway stops the install. I had to purchase Root Explorer to complete my conversion, only thing I can say is Root Explorer is worth the money, as for 340, if you are running Steve's ROM with no problems stay with it. Here is the link to the instructions I used, http://forum.xda-developers.com/showpost.php?p=8558692&postcount=4, good luck.
Click to expand...
Click to collapse
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
derechbennoach said:
If you install the three files and flash the boot.img file to a 2.2 rom and have the new 340 apk as update.apk on the sd it will install. I have done it twice. Once from 1.7.0.and once from the pre release 2.2.
BUT it is not worth the trouble. 318 is a better stock rom.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
rnj79 said:
I could not be more serious right now when I tell you mine would not work that way... I had to go from 318 2.2> O2 2.1> O2 1.6 and am FINALLY booting into AT&T 1.6 as I type. A lot of people have Streaks that aren't able to do as yours did, mine is one of them. I don't know if its because my Streak is an older one, I bought it in August, or what the deal is but I was not joking!
All is well though. I have finally gotten it back to Stock AT&T 1.6 with my original baseband of 31. Now I shall see if I can go to the new AT&T Froyo...
Click to expand...
Click to collapse
Good to hear. Mine is white one. I bricked it twice and have brought it back. I know I am not smarter maybe just lucky.
Good luck.
Sent from XDA app using Streakdroid 1.8.0
Oh, fuuuu...crap.
I may have screwed up here. I rooted my device using Revolutionary, and then using ROM Manager installed the latest Synergy mod on my stock (unrooted Froyo) Thunderbolt. Everything loaded fine, it seemed to be flawless ... but after the update I'm not getting any signal at all. I figured this was a radio issue, so I downloaded the latest radio that was leaked (the 2.11.605 one), put it on my SD card, and flashed that. It said it was "updating" the radio (RADIO_V2), but still no luck. I've tried a few different versions, and although it seems to "flash" and update fine, there's still no signal. Not 1x, 3g, or 4g. Nada. :-\
According to HBOOT, "RADIO" is 1.16.00.0223r, if that helps.
Any ideas on how I can basically undo all this, or have I spectacularly failed at this?
-BT7
bandtrumpet7 said:
Oh, fuuuu...crap.
I may have screwed up here. I rooted my device using Revolutionary, and then using ROM Manager installed the latest Synergy mod on my stock (unrooted Froyo) Thunderbolt. Everything loaded fine, it seemed to be flawless ... but after the update I'm not getting any signal at all. I figured this was a radio issue, so I downloaded the latest radio that was leaked (the 2.11.605 one), put it on my SD card, and flashed that. It said it was "updating" the radio (RADIO_V2), but still no luck. I've tried a few different versions, and although it seems to "flash" and update fine, there's still no signal. Not 1x, 3g, or 4g. Nada. :-\
According to HBOOT, "RADIO" is 1.16.00.0223r, if that helps.
Any ideas on how I can basically undo all this, or have I spectacularly failed at this?
-BT7
Click to expand...
Click to collapse
Well you shouldn't panic. Which radio did you flash? I would flash the MR2 one from this link http://forum.xda-developers.com/showthread.php?t=1154010 . If that doesn't work, I would download the rom directly from Synergy here http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
From recovery, wipe everything manually (Wipe data/cache/dalvik) than flash the file from where it is on your SD card. If you need specific instructions feel free to ask.
bandtrumpet7 said:
Oh, fuuuu...crap.
I may have screwed up here. I rooted my device using Revolutionary, and then using ROM Manager installed the latest Synergy mod on my stock (unrooted Froyo) Thunderbolt. Everything loaded fine, it seemed to be flawless ... but after the update I'm not getting any signal at all. I figured this was a radio issue, so I downloaded the latest radio that was leaked (the 2.11.605 one), put it on my SD card, and flashed that. It said it was "updating" the radio (RADIO_V2), but still no luck. I've tried a few different versions, and although it seems to "flash" and update fine, there's still no signal. Not 1x, 3g, or 4g. Nada. :-\
According to HBOOT, "RADIO" is 1.16.00.0223r, if that helps.
Any ideas on how I can basically undo all this, or have I spectacularly failed at this?
-BT7
Click to expand...
Click to collapse
Am I reading this right???? You said you rooted with Revolutionary.... Then you flashed some Synergy mod with ROM Manager (always a no-no).... onto your STOCK, UNROOTED FROYO Tbolt???? How did we go from rooted with Revolutionary to stock, unrooted Froyo? I'm confused.
loonatik78 said:
Am I reading this right???? You said you rooted with Revolutionary.... Then you flashed some Synergy mod with ROM Manager (always a no-no).... onto your STOCK, UNROOTED FROYO Tbolt???? How did we go from rooted with Revolutionary to stock, unrooted Froyo? I'm confused.
Click to expand...
Click to collapse
Sure hope he's just confused...
loonatik78 said:
Am I reading this right???? You said you rooted with Revolutionary.... Then you flashed some Synergy mod with ROM Manager (always a no-no).... onto your STOCK, UNROOTED FROYO Tbolt???? How did we go from rooted with Revolutionary to stock, unrooted Froyo? I'm confused.
Click to expand...
Click to collapse
Lol I saw that, I decided not to say anything, I guess you have the sharper tongue than me
Ya pretty scary. I'm hoping he meant he rooted his phone and when he said unrooted, he meant "stock" froyo build on his phone.
Sounds like he is able to boot up, just not get any signal.
I'm guessing he is not too skilled in the ways of Android yet.
Lol just found something interesting. Synergy isn't even on rom manager? I was checking to see if the version ofcsynergy he was using was a previous froyo build, and I can't even find it on rom manager
He probably meant that he used Rom Manager to load the rom rather than using recovery.
haha weird
OK, so I was tired when I wrote my initial post, and I probably didn't make a whole lot of sense. Let me be a bit clearer.
For reference, no, I'm "not too skilled in the ways of Android yet". I've been living with Froyo, anxiously awaiting Gingerbread, and then got fed up and read about all the benefits that come with rooting. Now that an easier method has presented itself - the Revolutionary method, as opposed to opening a command prompt and doing the adb stuff, which I can do - I rooted a friend's phone - but decided to not take the plunge myself - I decided to go ahead and give GB a shot.
So let me break down what happened:
- My phone was unrooted previously, running the same software it came with. I'd done a few OTA updates that Verizon provided but had never gone into my phone. That's why I called it "stock", sorry if that terminology confused people. I just meant it was the OS that came on my phone - Android 2.2 w/ HTC Sense and all that jazz.
- I ran the Revolutionary method posted in the "Thunderbolt Android Development" forum. Worked fine. Ran Recovery and installed Superuser permissions as the documentation said. Worked great. Have a phone where if HBOOT launches, it says -Revolutionary- at the top, and it's got -S OFF. My phone technically is rooted.
- The Synergy mod was also posted in the "TB Android Development" forum. I downloaded that and installed it using ROM Manager (Install ROM from SD). Worked fine ... but then had no signal. Every other aspect of the phone seemed to be working. My radio just wasn't working.
- Downloaded an updated radio from the TB Android Dev. forum, ran that, it said it was updating the radio. Rebooted the phone after the update ... still no signal.
I "solved" this problem by flashing the leaked HTC/TB Gingerbread build, the latest one that was like 400 MB, and when I booted my phone up again I had Gingerbread on my phone with HTC Sense 2.1, and I had signal. So I'm living right now with a fully working phone, but I wanted to dip my foot into custom ROMs. So now I have a backup method just in case the radio thing doesn't work again, but what can I do to install a custom ROM and ensure that I get signal?
Thanks for the response, xebryus - and to everyone else, sorry I was a little confusing. Everybody starts from somewhere, right?
-BT7
Download the GB ROM you want, boot into clockwork (please don't install VIA ROM Manager). In clockwork using you Volume keys to move and the Home button to select....
Select Wipe Data/Factory Reset
Select Wipe Cache
Select Advanced
Select Wipe Dalvik
Select Go Back
Select Mounts and Storage
Select Format /system
Select Go Back Until you are at the first screen
Select Install from SD Card
Select Choose ZIP
Go to the folder where you downloaded the ROM
Select ROM
Select Yes.
When it is done Reboot.
Enjoy!
Sent from my SHIFTAO5P using XDA App
Hey, at least you didn't brick your phone, so kudos for you for getting that far.
As others have stated there are basically two kinds of radio versions out there. One that work with Froyo builds and ones that work with GB builds.
So depending on the rom you are loading, you just have to make sure you have the right radio to match the rom(the rom thread should tell you what radio it requires). From what you were saying, it sounded like you just had the wrong radio.
Anyways, couple of things you want to make sure you do. Any check to make sure the checksum is correct on the radio (so that it's not corrupt) otherwise you could have some major issues. Also, once you flash the radio and you get your phone back up, make sure to either rename or delete the PG05img file from your SD root, otherwise, again a major hassle.
Check out the noob thread at the top of this forum also. It has great info there that will help you on your journey.
Good Luck.
I have always felt more in control flashing from recovery or hboot but I'm curious why no rom manager?
Sent from my Tbolt running Das Bamf 3.0...
RevosFTS said:
I have always felt more in control flashing from recovery or hboot but I'm curious why no rom manager?
Sent from my Tbolt running Das Bamf 3.0...
Click to expand...
Click to collapse
When the TB first came out, it seemed that people were having issues with using rom manager to flash roms (alot of force closes, things in general not working correctly). So many experienced people said to use recovery rather than rom manager to flash anything on the TB.
I guess that idea just kinda stuck after that.
Ok thanks. I will still use recovery anyhow I am more used to it. Plus I'm kinda old school I love adb haha
Sent from my ADR6400L using XDA App
I have downloaded Synergy Rom and have no problems except that I am not able to get the radio to flash. I am on verizon and chose the MR3.5 radio. I did a battery pull and then pressed the power and volume down button to enter HBoot but I do not have an option to Upgrade. What am I doing wrong any help is appreciated. I need help quick, thanks!!!
1more thing when i am in the HBoot window my only options are Fastboot, Recovery, Factory Reset, Simlock, Hboot USB, System Info, Image Crc..... it says radio is 1.16.00.0402w.
Does this mean the radio was already upgraded. Why can I not get a signal then?
Did you rename the .zip and have it on the root of your SD card?
Sent from my ADR6400L using XDA App
HarlyFan said:
1more thing when i am in the HBoot window my only options are Fastboot, Recovery, Factory Reset, Simlock, Hboot USB, System Info, Image Crc..... it says radio is 1.16.00.0402w.
Does this mean the radio was already upgraded. Why can I not get a signal then?
Click to expand...
Click to collapse
Nope..402w is still MR1. Sounds like you are already in bootloader so at this point if it isn't updating then more than likely the file is named incorrectly as stated above.
Radios HAVE to be named PG05IMG.zip (3rd character is a ZERO, not the letter "O"). It HAS to be in the root folder of your SD card. Now, turn the phone OFF.
Next, hold down the VOL-DOWN button. Keep it held down. Is it still held down ? If so, push and hold down the POWER button. When the screen turns on, you can release both. This menu will automatically look for 3 or 4 files with certain names. One of the names (files) it looks for is .... PG05IMG.zip. When/if it finds it, it will check it and ask you if you want to load it. Tell it to load it and then leave your phone alone. It will update it and reboot like normal (if successful).
I installed the CLEANrom tapped edition rom after wiping everything as instructed. It boots and initially I had issues with wifi working, but that seems to be working after flashing a stock kernel. Now if I try to play anything with sound or change the volume using rockers or in the phone itself it forces a reboot.
Any ideas?
Thanks
You are probably on old firmware and need to flash the patch
http://www.myandroidfiles.com/Downloads/Rezound/3.14.605.5/GB%20Firmware%20Patch.zip
Sent from my Rezound
Still having issues
Thanks for the reply. I actually ended up flashing it back to the rom that I had. I also made sure I flashed it to the original recovery as well which is amon ra. The rom I flashed it back to was the clean rom standard 4.4.
Unfortunately, I'm having the same problem no. If I go into the dialer and hit a number it freezes and force reboots. If I hit the volume rocker, it freezes and force reboots. It just force reboots for almost everything except for texting and going into apps.
any thoughts? The 4.4 worked fine on the firmware that's on here, and I did do the wipe and reset before I installed back. Maybe I bricked it?
Definitely not bricked. You wouldn't be able to even boot if bricked. What firmware are you on?
Here is some information
CleanROM standard 4.4
htc sense version 3.6
android version 4.0.3
kernel 3.0.16
I think the hboot was 2.11 or something like that.
Yeah, I figured it's not totally bricked. It should be on ICS. The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Mr. Lando said:
CleanROM standard 4.4
htc sense version 3.6
android version 4.0.3
kernel 3.0.16
I think the hboot was 2.11 or something like that.
Yeah, I figured it's not totally bricked. It should be on ICS. The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Click to expand...
Click to collapse
Even though your on ics, it looks like your on gb firmware. Search for the gb patch for ics and flash in recovery and problem solved
2.11 hboot is gb firmware, 2.21 or up is ics firmware
Mr. Lando said:
The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Click to expand...
Click to collapse
It runs just great on the correct firmware lulz
Correct Process for Updating firmware
Hello,
You stated that 2.11 in the hboot indicates gb firmware. Do you know a link to the correct thread that would give me the appropriate process for updating the FW one that will work with the CLEANrom 1.4 dev version? I got the wifi working again after flashing the "old firmware patch" and then reloading CLEANrom 4.4 everything went back to normal. However, I hate sense and I would like something without it which is what the dev version provides, but if I cannot get wifi working then it's kind of useless. When I say "if I cannot get wifi working" what I am indicating is that when I try to run the cleanrom dev version 1.4 WIFI gets stuck on "turning on" but never turns on and eventually just says "error" with no further details. I searched through forum feeds and found a few forums that hinted on steps, but many people have seemed to be confused by this issue in the past and perhaps it is related to firmware as you said.
Thanks
i would wipe everything again, reflash the rom, and then immediately the patch. that should fix everything. key thing is flash the patch before booting the rom. ive flashed the patch after rebooting before and had things go haywire. not a promise that it will work, just letting you know what ive run into
Scosler has everything listed in the op for the rom, and all files are there as well. There's a bunch of different instructions for however your phone is set up.
Sent from my Rezound
Continuing...
Hi,
Not to sound like a total idiot here, and I probably do, but you had mentioned I should update the firmware so that hboot indicates 2.21 or higher. Is there an easy process for this or a thread I can turn to so that I can be sure it's updated. I believe I already did the step you mentioned.
I wiped/reset ----> flashed the 1.4 rom ----> ran the PH98IMG.zip----> then boot ----> then no PROFIT. wifi will not work. Maybe it's firmware after all. I don't know how I ended up on gb, I had a friend walk me through this the first time and I'm pretty technical. I used the automated tool by that one guy to flash the amonra recovery and I thought that was 2.21 or higher, but maybe I'm wrong.
If s on and on 2.11 hboot Method 4:
-Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
-Reboot to recovery
-wipe data / Factory Reset
-Flash ROM
-Flash GB Fimrware Patch
-Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
-Reboot
-Profit!
Based on what you typed you didn't flash the firmware fix...
Mr. Lando said:
Hi,
Not to sound like a total idiot here, and I probably do, but you had mentioned I should update the firmware so that hboot indicates 2.21 or higher. Is there an easy process for this or a thread I can turn to so that I can be sure it's updated. I believe I already did the step you mentioned.
I wiped/reset ----> flashed the 1.4 rom ----> ran the PH98IMG.zip----> then boot ----> then no PROFIT. wifi will not work. Maybe it's firmware after all. I don't know how I ended up on gb, I had a friend walk me through this the first time and I'm pretty technical. I used the automated tool by that one guy to flash the amonra recovery and I thought that was 2.21 or higher, but maybe I'm wrong.
Click to expand...
Click to collapse
If i were you i would either s-off or flash one of the ics leak ruu's. that will help. there are many ways to solve your problem but those are your best bets
My issue is resolved. Thanks for all of your help and insight.
Sent from my ADR6425LVW using XDA
Care to share what you did? I am having exact same issue . . .
nvm - resolved: applied GB Patch right after ICS ROM flash (who would have known - I was kind of ignoring those GB patch instructions, since they did not apply to ICS).