Now seem like my PPC have a problem with G-Sensor. Now i can not touch on my screen. and i found the solution have to fix it just edit in registry but can not input the value on it. Does anyone help me to do as a CAB files to push it into registry........
follow the road:
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
- change value of CalibrationData by the good one
500,525 865,880 850,150 165,155 155,880
Thank you very much all of your help.........
Related
Is there a good Samaritan out there who can explain to me exactly how the program is installed and how does one go about editing the Registry of the TyTN. I have bought Nokia HS-12W BT stereo phones and have added in Sleuth's anti-skip modification. All works well except that I do not get stereo. I must modify the Registry according to Sleuth's working model, and need to do the Registry mods.
Please help!
I am sure there are other newbie's who are also keen to learn new tricks.
Which problem are you exactly having? Just install the cab file, run the program and browse the registry to the place you want to modify, add or delete a key. Tap on the key or screen to do this.
You have to copy the cab file to your Hermes first. When I install cabs, I either send them to myself as email attachments or I use activesync explorer mode. Alternatively, if you can find the site using Pocket Internet Explorer (PIE) then you can download the cab directly. Once the cab is on your Hermes, then tap to install.
There is an alternative way to install apps on WM and that's with a windows based installer. If the file isn't a cab, then you'll need to connect up your hermes with its USB cable, wait for activesync to connect then run the installer on your PC. The installer itself will send the cab file over for immediate installation.
If you're familiar with the Windows registry you'll have no problems understanding the WM registry. When you change a value, make sure you power off with the power button to reset & make the change active, otherwise your registry setting might not "stick". Some registry values take effect immediately but I always power cycle after making a change just to be sure.
Installing PHMRegEdit
Hi
Could you please attache the CAB file.
I have load the file and the file is PHMRegEdit.msi
Thanks
I was wondering "which" .cab to copy over for the AT&T Tilt 8925. I did try the Stngr_ARM and it did install. However, I can not expand the registery top folders or export the registery.
Thank you in advance
OK, figured it out.
regedit.Mrln_ARM
did the trick
Hi
I have a swedish version of the x7500 / Advantage and they have disabled the block recognizer in that version.
I know there is some reg fix for it but i cant find it anywhere.
So plz help me find the fix or mabey someone can tell me what i should change in the registry to get it back...
Thanks
/Magnus
Sebulba_se said:
Hi
I have a swedish version of the x7500 / Advantage and they have disabled the block recognizer in that version.
I know there is some reg fix for it but i cant find it anywhere.
So plz help me find the fix or mabey someone can tell me what i should change in the registry to get it back...
Thanks
/Magnus
Click to expand...
Click to collapse
If you have Tweaks2k2, there is a setting to unhide the block recognizer.
That failing, your right it is just a reg hack. Perhaps someone else here will know what to change, as I don't.
Tweaks2k2
I have tweaks2k2 and i have tried that one but the page where i should be able to chek the box to show block recognizer is greyed out (disabled).
I thougt that tweaks wasnt up to date to fix x7500.
So mabey i should send a mail to tweaks...
Thanks
Magnus
Thats strange. I have it shown and selected under keyboard tricks. I just tested it and the block recognizer works.
I'm using v3.26.0.0 on the English language Advantage, so I can confirm this arrangement works. Oh, thats right, you said you had the swedish version. I wonder why the registry would be different in that respect? I'm sorry I couldn't help out more.
clsid is missing
Hi and thanks mysticbluebmw
I think they have removed the clsid from the registry in the swedish version so i think that is the problem.
Anychance you can check the clsid in yours and look what keys that are in it.
Then i can try to recreate them and see if it shows up in the siplist.
If possible i want the blockrecognizer.
I know that if you have a phone bought from dangaard you can download the fix from their site. In sweden the site is www.smartmobile.se
Cya
Magnus
according to microsoft, the handwriting recognition is only available on WM5 in certain languages.
English
French
German
Spanish
Italian
Brazilian Portuguese
There are of course others for the asain languages, like CHT, CHS, Japanese and Korean, but other than that, you are best looking for a third party solution like penreader.
The block recognizer is availible in swedish.
I just need to get the regfix to make it visible again.
I have done the same with a Qtek9100 before.
Not sure if the same fix will work because i cant find it again
I let you all know if i make it work.
/Magnus
Oh, I looked through HKCR/CLSID, and found this entry which I exported for you to take a look at (renamed .reg to .txt)
If that does't help, I don't know if your problem may be of a similar nature, but some fellows had some hard times switching between inputs quickly. This solution worked wonders for them. They guessed it might have have gotten rid of the permissions. If you don't want to try it, thats cool, I just thought, it couldn't hurt.
1. Export HKCR\CLSID (will save to a *.reg file)
2. Del or Rename HKCR\CLSID
3. Import the backup of HKCR\CLSID
Turn off your device about 15 sec and reset .
OR.......
- renaming the CLSID to something else (say CLSIDbak)
- save the changes
- turn it off for 10 seconds
- rename it back to CLSID
- save the changes
- turn it off for 10 seconds
Good Luck!!!
Thanks
It's getting closer now...
Now I have it in the list but I cant select it
So ill keep working on it.
Cya
Thanks a lot i have it up and running now.
I did use your reg-file but i hade to change 2 things in it.
I needed to change DefaultIcon to "msimsw.dll,0"
and also InprocServer32 to "msimsw.dll"
So i guess if you have other languages that dont have Block Recognizer take a look on your keybord and se what defaultvalue the InprocServer32 has and use that for the Block Recognizer (that you get from the txt file we got from mysticbluebmw).
So once again Thanks a log...
Cya
/Magnus
PS now i will take care of my netx problem but that will be another thread, so ill hope ill cya there...
Block recognizer in POLISH WM5
Hello Guys,
I have the same problem - I cannot see the Block Recognizer on the list, I have imported they posted REG key, now I have on the list but I can not select it.
The problem is that in the Windows directory there is no msim.dll nor msimsw.dll
I have other Ameo that I can copy it from but I am unable to copy or rename or duplicate - it allways give me the error mesage. Anyone of You know where can I get msim.dll from??
Solved
Sometimes I have to look twice in the directory..... There is of course msimPL.dll in the Windows dir. Just modify the reg file posted few posts earlier to msimpl.dll in two places, import, softreset and ... it WORKS
Guys,
Can someone please help me....TX9 i killing me....How can i mak ABC as default method for typing, instead pressing * and hold it....
thanx
I second this request.
Experts, please help.
leveex said:
Guys,
Can someone please help me....TX9 i killing me....How can i mak ABC as default method for typing, instead pressing * and hold it....
thanx
Click to expand...
Click to collapse
Use this cab file to disable TX9. Maybe this can be a quick fix for you guys. Read this post first before installing: http://forum.xda-developers.com/showthread.php?t=351468
There's also another option:http://forum.xda-developers.com/showthread.php?t=354914
dont try the attached cab file.it will only make your input into numbers instead of letters.im still trying to find a way to disable xt9. ive tried tinkering with all sorts of registry values but no luck so far.i really hope someone could come up with a solution...
possible to add other languages to the xt9 dictionary?
I was playing with registry and I found if you change DWORD value you might find something!
Here is the place in registry:
\HKLM\Software\Tegic\eT9\
Hi guys so i got a a US cellular ROM and used rstoyguy's blank kitchen from ppc. I took out all the unwanted programs that i dont need and i wanted to edit some registry, the thing is i couldn't find the hv files to edit. the reason for this is when i flash the phone using this ROM i edited and go to SMS/MMS and go to mms options i could get rid of USC in the servers tab. I know how to find it in the registry editor manually but what i want to do is to edit the registry in the actual rom so when i flash it to a phone the server tab in mms is already unlocked and doesn't show me USC. any ideas? or should i use another kitchen ?
In my GSM kitchen, I can inject registry changes in an .RGU file or .PROVXML file.
If your CDMA kitchen contains such files, you could look to inject your registry change that way.
Make sure to use a Text Editor that supports Unicode format as well.
HTH,
So my problem was the text editor. LOL i feel stupid now. thanks a bunch
Phone: Location Setting
Start-Phone-Menu-Options-Services-Location Settings-Get Settings
The location consent form has “US Cellular “ wording throughout the warning.
How do you edit this? I changed a lot of settings already but still no luck?
Why do you want to change that?
im just trying to make a generic rom. Without any trace of any other carrier. When you look at the USC ROM it seems to be one of the cleanest and easiest to modify, easy to understand. Once i finish this, this may help a lot of people who needs it. so please help me pls. Thats the only thing i need to take out. I found the registry in these files mxipupdate_oemoperators_104 and mxipupdate_oemoperators_106 but once i edit it just shows me a black box with scrolls on the side. I coudn't see the original consent like the once found in the registry. Instead it is blocked by another page. help thanks
motoyola said:
im just trying to make a generic rom. Without any trace of any other carrier. When you look at the USC ROM it seems to be one of the cleanest and easiest to modify, easy to understand. Once i finish this, this may help a lot of people who needs it. so please help me pls. Thats the only thing i need to take out. I found the registry in these files mxipupdate_oemoperators_104 and mxipupdate_oemoperators_106 but once i edit it just shows me a black box with scrolls on the side. I coudn't see the original consent like the once found in the registry. Instead it is blocked by another page. help thanks
Click to expand...
Click to collapse
Umm.. I think you are trying way too hard. Where do i get this page at on the phone?
it looks like this. how do you fix this?
Hi all,
I was trying to modify the ActionMenu that pops up when you slide the querty out. This is on a HTC S740, but I suppose it would be the same for all HTC devices with a slide out keyboard. My intention was to edit it in a way that option nr. 3 (messenger) brings up a different messenger than WLMessenger, as I never use this one.
My findings so far are that the information to the links are stored in a dll called ActionMenu in the windows folder. I was able to open it with notepad, however editing the path for the messenger somehow broke the whole dll so ActionMenu won't pop up at all anymore when sliding the keyboard open. I also tried editing it with XN Resource Editor, but there nothing is displayed. So for now I am at my wits end.
Maybe someone else could help out here? Would truly be appreciated.
Regards,
.-ombre-.
Dll is a compiled library and therefore a binary file... If you would like to edit it this brute way you should use hex editor and only REPLACE links. That means, new link must have the same lenght as the old one and none of bytes should be moved. Then obviously, final file must have the same size as the old one.
Anyway, then it mustn't work either.
yeah, thats something I tried in the meantime and no, that doesnt work either..
Oh well..