I installed the SDK and have run my ADB scripts for my samsung Vibrant before, I got home today and got a "The Program can't stat because AdbWinApi.dll is missing from your computer" error. I uninstalled the SDK and reinstalled it rebooting my computer after each just to make sure. I also tried moving the AdbWinApi.dll file to my Windows/System32 folder along with the Adb.exe.
I am running windows 7 64bit
Core I7 920 @2.67 GHz
6 GB ram
ATI 5750 Vid card
Any help would be great.
Cheers,
i figured it out
download daemon tools. install the free version. close cmd
open cmd
re type your path. and your computer should stop complaining about a missing driver.
This worked for me and i now have full access. hope this helps
Try this.
Shift + Right Click on folder C:\android-sdk-windows\tools, go to command mode option from there, and you should see it coming up with a command screen, type in adb devices with your phone plugged into the computer. If it shows your daemon is killing server, don't kill the window yet. Just wait...
It was meant to do this someway or whatever since I have a custom built PC for gaming and other purposes. I just didn't get the tech nerd answer right away for every problem solved, but it was all from you guys in XDA-developers, so I had this same error from trying to run 'adb' from start panel, and it didn't work because it was telling me my adb was needed to be re-installed and my AdbWinUsbApi.dll was missing from my folder, and It didn't tell me what folder, so I remembered my old way of learning how to run adb for the first time with my device.
Shift + Right Click tools folder from C:\android-sdk-windows as in C:\android-sdk-windows - Shift + Right Click RUN COMMAND PROMPT MODE. It should be fine after running this commands for your devices to show in the list.
type:
adb devices
adb remount - This is if your connected to a device already after.
adb install C:\android-sdk-windows\tools\setcpu.apk - example of your first apk file install.
Running the daemon killing server isn't gonna do anything to your phone like technically ruin it or trash it but its not, honestly, I never seen my phone ruined from this daemon killing server part, so if anyone cared to explained?
alekosy said:
Try this.
Shift + Right Click on folder C:\android-sdk-windows\tools, go to command mode option from there, and you should see it coming up with a command screen, type in adb devices with your phone plugged into the computer. If it shows your daemon is killing server, don't kill the window yet. Just wait...
It was meant to do this someway or whatever since I have a custom built PC for gaming and other purposes. I just didn't get the tech nerd answer right away for every problem solved, but it was all from you guys in XDA-developers, so I had this same error from trying to run 'adb' from start panel, and it didn't work because it was telling me my adb was needed to be re-installed and my AdbWinUsbApi.dll was missing from my folder, and It didn't tell me what folder, so I remembered my old way of learning how to run adb for the first time with my device.
Shift + Right Click tools folder from C:\android-sdk-windows as in C:\android-sdk-windows - Shift + Right Click RUN COMMAND PROMPT MODE. It should be fine after running this commands for your devices to show in the list.
type:
adb devices
adb remount - This is if your connected to a device already after.
adb install C:\android-sdk-windows\tools\setcpu.apk - example of your first apk file install.
Running the daemon killing server isn't gonna do anything to your phone like technically ruin it or trash it but its not, honestly, I never seen my phone ruined from this daemon killing server part, so if anyone cared to explained?
Click to expand...
Click to collapse
Sorry guys
Its been about a week since I have been trying on google, unlockr as well as xda forums for unlocking bootloader for nexus S, and I STILL am stuck at my device not showing up when I type 'adb devices' even though I have tried SDK drivers, PDAnet drivers, etc...countless restarts, countless uninstalls, following each and every method to the letter. The closest I have come is to alekosy's issue above where daemon kills the process as he describes and then, nothing. I keep waiting. Every time once daemon starts, whenever I type adb devices, I only get this 'list of devices attached'...and nothing else. in device manager, device driver shows installed correctly...
I would be heavily indebted to anyone who could show me the light (get my device show up in adb devices and then allow me to root).
Thanks a bunch!
(Frustrated beyond belief!! )
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Thanks espentan. That worked for me.
An easier way
[fastboot does not work, adb works]
No need to fiddle with environment variables. This should do it:
cd C:\Program Files\Android\android-sdk-windows\platform-tools
..\tools\fastboot.exe devices
etc.
Explanation: the dll's (along with adb) were moved to platform-tools. Issuing fastboot from this directory, using '..', which means "up one directory level", with 'tools' then picks up the dll's.
Thank you very,very much....that worked like a charm..after hours of head aches...
twistadias said:
Thanks espentan. That worked for me.
Click to expand...
Click to collapse
espentan said:
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
That worked for me too. Very easy explanation...!!! Thanks
Alot easier fix, go to google type in adbwinapi.dll and download it.
Put it in sdk/tools
Done
Sent from my SGH-T959 using Tapatalk
alekosy said:
Try this.
Shift + Right Click on folder C:\android-sdk-windows\tools, go to command mode option from there, and you should see it coming up with a command screen, type in adb devices with your phone plugged into the computer. If it shows your daemon is killing server, don't kill the window yet. Just wait...
It was meant to do this someway or whatever since I have a custom built PC for gaming and other purposes. I just didn't get the tech nerd answer right away for every problem solved, but it was all from you guys in XDA-developers, so I had this same error from trying to run 'adb' from start panel, and it didn't work because it was telling me my adb was needed to be re-installed and my AdbWinUsbApi.dll was missing from my folder, and It didn't tell me what folder, so I remembered my old way of learning how to run adb for the first time with my device.
Shift + Right Click tools folder from C:\android-sdk-windows as in C:\android-sdk-windows - Shift + Right Click RUN COMMAND PROMPT MODE. It should be fine after running this commands for your devices to show in the list.
type:
adb devices
adb remount - This is if your connected to a device already after.
adb install C:\android-sdk-windows\tools\setcpu.apk - example of your first apk file install.
Running the daemon killing server isn't gonna do anything to your phone like technically ruin it or trash it but its not, honestly, I never seen my phone ruined from this daemon killing server part, so if anyone cared to explained?
Click to expand...
Click to collapse
Thanks!!!! This helped me after hours of trying to use adb, now it finally works! I just have to right click that folder and use the command prompt that way every time in order to use adb, weird but it works so i'm fine with that. Thanks
Thanks espentan
espentan said:
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
It worked perfectly for me.
Thanks
espentan said:
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
nice!
it seems only win7 users have to do the steps while xp do not
espentan said:
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
This solved it for me
sgtmedeiros said:
Alot easier fix, go to google type in adbwinapi.dll and download it.
Put it in sdk/tools
Done
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
I have done this. It worked perfect. thank you mate!
sgtmedeiros said:
Alot easier fix, go to google type in adbwinapi.dll and download it.
Put it in sdk/tools
Done
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Much easier thanks. Xp here
You don't need to google for it, it's in platform-tools, along with adb.exe
help pls
Guys,
I am getting the same error about the missing .dll file when I try toi install the exe from revolution.
I tried changing the environmental variables, no luck
tried just downloading the .dll from google and dropped it into sdk/tools, no dice!
Can someone please help me to get this to work, have a brand new Sensation sitting here and I can't deal with Sense. Thanks
the error I get when trying to install is of course:
Adbwinapi.dll is missing
GreatWall2 said:
It worked perfectly for me.
Thanks
Click to expand...
Click to collapse
Thanks a lot, this worked for me too... The only thing i changed was the name of the directory from 'platform-tools' to 'tools' cause the file was in there.
Related
THIS IS STRICTLY A GUIDE TO PRE-PARE YOU ON HOW TO SET-UP ANDROID SDK AND ADB DEVICES(DRIVERS), IF YOU ALREADY HAVE THAT SET-UP YOU CAN SKIP TO EUGENE'S POST ON HOW TO ROOT MYTOUCH SLIDE.
Last Updated:6/29/2010 at 11:36PM
Any other issues to deal with the actual process to root your mytouch slide should be directed toward his thread. Thank you for reading.
Okay so after about 4 hours of reading and asking questions I finally got my device rooted. My biggest problem doing this was that the guide in this forum was basically showing you how to root the phone if you had previous experience with androids and android SDK which I did not.
Note: If you have SDK installed already on your pc please delete your SDK folder and start from scratch for best results with my guide.
1. download Android SDK.(You will not have to use Android SDK physically but you will need it installed on your pc to root your phone) Save it to your PC where you can find it.
2.Extact the .zip file, do not rename just yet for the sake of my guide you also may delete the .zip file of it to keep clean.
3a. Move android-sdk-windows* out of the android-sdk_r06-windows folder onto the root of your C:/ drive.
*=the name of the folder may be different if you use a different operating system but since I do not own the other systems I cannot really tell you what the folders name.
3b.Now that you have the folder in the correct place you can rename the folder from "SDK-Anroid-Windows" to something easier such as "SDK" "Android" or something else which you will remember has to do with SDK.
This next part is not required, if you do not feel comfortable doing this, then don't, there is other ways around this.
3c.You also have the option to change your the path of your directory on your system. To do this, follow the instrustion here on step 2.( I would like to thank fermunky for his input)
My directory was pointed to the C:/Program files so I switched it to C:/android/tools , for those who do not know what this does it simply makes it so you do not have to change directory in step 7 (CD), you will only have to open your command prompt and then your ready to enter "ADB devices" .
4.Install the correct ADB drivers from pdanet . Select the proper download based on your OS if you do not know what bit you are using click start, right click computer, click properties, the system type will show you the proper file to download. and save it to your computer where you can find it.
5.Start the installation process for the ABD drivers, Follow the on-screen directions to install the drivers ( make sure your phone is not plugged into the pc at this time)
6.Check to see if you did this correctly, plug in your phone and open your comand prompt on your computer and type:
cd C:\android\tools**
**=your file directory might be different than this, it depends what you renamed your folder
then type:
adb devices ( this will now show all the devices connected to an adb devices)
Check to see if your device is listed and connected properly.***
***=If it is correctly connected you will see a device listed and under attached it should say device.
After you have this all set up you are ready to root your phone via the guide from Eugene.****Remember you need to add the contents from his root.zip file into the tools of your SDK folder in order to root your phone.
****=Eugene's guide has changed since I wrote this but you still are ready to follow his steps. I plan on rooting someones slide soon based off his steps and will edit here if I need to add anything)
Thanks for reading.
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
fermunky said:
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
Click to expand...
Click to collapse
the other guide mentions to create a new variable such as:
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\tools
Click to expand...
Click to collapse
so would i follow this? or list that directory under the already-enabled PATH variable?
Yeah just use the existing PATH variable, and only need the path, no need to include variable names.
I think this is a very valuable how-to for the noobs out there and im going to pass this up the chain to get sticky'd. I also posted this in the slide bible. Good job, OP
For the uninitiated, and yes it's common sense
When I was using Windows (as I'm using Ubuntu now), and reading all the adb guides, for ease of use and to prevent people from getting confused, they name the sdk as "android-sdk-windows", which is fine for a newcomer (it's the same for Ubuntu except the "windows" part and the slash direction \ vs. /). However, you can name it whatever you want. You just need to make sure to have the same name in your path. For example, I'm lazy and my typing skills aren't that great. I don't want to type 19 characters (yes, I counted). So I just named it simply "android". 7 characters from 19. Its way more efficient for me. I've contemplated naming it "andy" or something to shorten it further. But, again, you don't even need to name it anything android related. You can choose to name it r2d2 (see what I did there?) if you want! Just my 2 cents. Thanks!
Yeah I could of renamed it something different but I didn't think about that til after it was written, I will fix it as soon as I am on an actual pc. I will also include how to do it via mac and ubuanta(sorry if I miss spelled)
kingofyo1 said:
I think this is a very valuable how-to for the noobs out there and im going to pass this up the chain to get sticky'd. I also posted this in the slide bible. Good job, OP
Click to expand...
Click to collapse
Thanks kingofyo. Glad I could give back to this forum after all it has done for me. And if I find any other helpful tips to help make rooting easier I'll be sure to include it.
Sent from my T-Mobile myTouch 3G Slide using XDA App
fermunky said:
One thing I did that makes a lot of this a whole lot easier, is to add the directory to your Tools folder to your system's PATH variable, as explained in Step 2 here: http://developer.android.com/sdk/installing.html
What this allows you to do is run the commands with Tools (ADB, fastboot etc) from anywhere within the command prompt, without having to cd to your c:\android-sdk-windows\tools folder. This way, you can put any other update files, into any directory you want.
For example, let say i have update.zip directly on the C drive. I can simply go to command prompt, and just type "cd" and get to the root of the C drive, and then can just run "adb push update.zip /sd/card/". No need to store everything into the tools folder.
Click to expand...
Click to collapse
I will leave that as an option for others to pick if they want to do that, as some might not want to change their directory to follow that path.
oo, this cleared up a few things for me! thanks!
eff0rtless said:
oo, this cleared up a few things for me! thanks!
Click to expand...
Click to collapse
ah what pat of seattle do you live in? I live up in mukilteo.
rlacsamana1989 said:
7.Check to see if you did this correctly, plug in your phone and open your comand prompt on your computer and type:
cd C:\android\tools (your file directory might be different than this, it depends what you renamed your folder)
then type:
adb devices ( this will now show all the devices connected to an adb devices)
Check to see if your device is listed and connected properly.
Click to expand...
Click to collapse
when typing in 'adb devices', i get this message:
Code:
adb server is out of date. killing...
* daemon started successfully *
however, it does continue to list my device as attached.
the full message is:
Code:
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
HTxxxxxxxx device
*the x's do represent a valid serial number
-------------------------------------------------------
is this a problem? and will i run into any problems trying to successfully root?
note: i have done a search on this and the results returned as the program DroidExplorer being the culprit, however, i do not have that program installed.
Do you have the most updated Android SDK? And try searching that topic on google and see if you can find people with the same issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
rlacsamana1989 said:
Do you have the most updated Android SDK? And try searching that topic on google and see if you can find people with the same issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I believe so. I actually installed of the available packages as per the initial guides instructions. If I needed to uninstall & reinstall the sdk, how would I do that?
As yes I have done a thorough search. I mentioned the results in my original comment.
poetik517 said:
I believe so. I actually installed of the available packages as per the initial guides instructions. If I needed to uninstall & reinstall the sdk, how would I do that?
As yes I have done a thorough search. I mentioned the results in my original comment.
Click to expand...
Click to collapse
You should be able to just delete the folder it downloaded. and make sure you empty your trash. I will look at what the issues can be. and let you know if I find anything. I'm pretty good at that
Edit: Have you seen this post? I'd start from the first thing they say which is going to task manager and ending adb.exe and if that doesn't work go to the next thing they stated to do. If none of those work come back and I will try and figure it out.
Ok so I just got my slide and want root. Im coming from a rooted g1 which has a completely different root process and so I have no experience with sdk and adb sadly. Im running windows 7 and I have followed this guide step-by-step but every time I get to the point where I type "loop" in eugenes guide it says it does not recognize the command... I saw somewhere sdk components are not supported by windows 7. Is this true? And is there a way around it? I also saw somewhere that it could be that I dont have my enviroment variables set correctly. Im not sure by what it means to add the full path to the tools\ directory to the Path variable value. When I double click Path default displays:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
Where do I add it?
My tools directory is set in the root of my C drive as
C:\SDK\tools (most people typed android, renamed mine to just SDK, seemed faster)
This is what im trying to figure out at this point. Sorry if it very noobish.. Any help would be greatly appreciated.
cdt82002 said:
Ok so I just got my slide and want root. Im coming from a rooted g1 which has a completely different root process and so I have no experience with sdk and adb sadly. Im running windows 7 and I have followed this guide step-by-step but every time I get to the point where I type "loop" in eugenes guide it says it does not recognize the command... I saw somewhere sdk components are not supported by windows 7. Is this true? And is there a way around it? I also saw somewhere that it could be that I dont have my enviroment variables set correctly. Im not sure by what it means to add the full path to the tools\ directory to the Path variable value. When I double click Path default displays:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
Where do I add it?
My tools directory is set in the root of my C drive as
C:\SDK\tools (most people typed android, renamed mine to just SDK, seemed faster)
This is what im trying to figure out at this point. Sorry if it very noobish.. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Okay my guide is to set you up to root, you need to download slideroot.zip from eugene's how to guide. It will download a folder so you need to save it somewhere you will find it. Once you have it saved extract the files and the files within that folder you need to put in the tools of the sdk directory. Do not just drop the folder as that would change the directory even more to another folder. A file in that folder is what actually makes the loop feature work and there are other things you will need from that folder to root.
And to this. %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\
you just need to delete "Program Files (x86)\QuickTime\QTSystem\"
and then replace it with your directory to your C:/
rlacsamana1989 said:
You should be able to just delete the folder it downloaded. and make sure you empty your trash. I will look at what the issues can be. and let you know if I find anything. I'm pretty good at that
Edit: Have you seen this post? I'd start from the first thing they say which is going to task manager and ending adb.exe and if that doesn't work go to the next thing they stated to do. If none of those work come back and I will try and figure it out.
Click to expand...
Click to collapse
a successful uninstall & reinstall of the sdk worked for me. i no longer get the 'adb server is out of date' message when trying to list devices.
when reinstalling all of the packages in sdk, i did note this message:
Code:
'Downloading Usb Driver package, revision 3
Installing Usb Driver package, revision 3
Installed Usb Driver package, revision 3
Updated ADB to support the USB devices declared in the SDK add-ons.
'adb kill-server' succeeded.
ADB: * daemon not running. starting it now *
ADB: * daemon started successfully *
'adb start-server' succeeded.
but its a good thing =]
another note:
when i have sdk all setup, HTC Sync no longer seems to work or recognize my device as connected, even after ending adb.exe in my task manager.
poetik517 said:
another note:
when i have sdk all setup, HTC Sync no longer seems to work or recognize my device as connected, even after ending adb.exe in my task manager.
Click to expand...
Click to collapse
Have you tried re-installing the pdanet drivers again. And make sure you aren't clicking the box that pops up on the bottom of the screen. And if that doesn't work I know there is a program I have installed on my pc that let's me delete drivers I just can't remember the program so ill post it once I get home from work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
usbdeview
rlacsamana1989 said:
Have you tried re-installing the pdanet drivers again. And make sure you aren't clicking the box that pops up on the bottom of the screen. And if that doesn't work I know there is a program I have installed on my pc that let's me delete drivers I just can't remember the program so ill post it once I get home from work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I think the program you're trying to remember may be "usbdeview"? This program allows you to disconnect or uninstall drivers.
I know that sounds like a very stupid question, but seriously - I don't know what it's supposed to do when I open it.
I downloaded and installed the Android SDK Installer with HTC Sync and Java from this thread: http://forum.xda-developers.com/showthread.php?t=1009419
Then, I opened the folder and double-clicked "SDK Manager", and a black window flashes once for a millisecond and disappears. This happens each time I open SDK Manager. I assume it is not supposed to behave like that.
Then, I went to the "platform tools" folder and opened "adb". Same thing. A brief black window pops up and scrolls a bunch of jibberish at hyper-speed and disappears within literally - a millisecond.
Now, I had nothing hooked up at this point - not my T-Bolt - nothing. I just wanted to peruse.
But now I'm afraid to go any further by hooking up my T-Bolt because I'm not sure what to expect. Can anybody offer any friendly guidance? I have rooted every single Android phone I've ever had, and many other phones belonging to friends and family, and I want to do this right by rooting the long way and learning as much as I can. I just need to be pointed in the right direction.
Thanks guys.
David
You need to go to your cmd prompt, and type "cd\" the cmd prompt should be c:\. Then type in "cd (whatever folder you placed sdk in)\platform-tools". Yes, leave a space between cd and the folder, no (). Then just type adb
Have your phone connected when you type adb, then type adb devices, and it should lust your phone with serial number.
jmiller98 said:
You need to go to your cmd prompt, and type "cd\" the cmd prompt should be c:\. Then type in "cd (whatever folder you placed sdk in)\platform-tools". Yes, leave a space between cd and the folder, no (). Then just type adb
Have your phone connected when you type adb, then type adb devices, and it should lust your phone with serial number.
Click to expand...
Click to collapse
Okay... when you say cmd prompt, I'm assuming that you're referring to START>RUN, and then the command.
Unfortunately, I'm not able get anything but, "Windows cannot find 'cd'. Make sure you typed the name correctly, adn then try again. To search for a file, click the Start button, and then click Search."
In the "Run" window where it says "Open", I've typed:
cd\ C:\Thunderbolt_Root_Files\platform-tools\adb
I've tried a myriad of combinations, and I'm not able to get any other result.
I feel like an idiot, and I don't know what I'm doing wrong.
start>run>type in 'cmd' then press enter then do what you have to do at the command prompt
magneticzero said:
start>run>type in 'cmd' then press enter then do what you have to do at the command prompt
Click to expand...
Click to collapse
Thank you!! That got me there!
Hi all. I hope I'm posting in the right place. I tried to post on the original thread http://forum.xda-developers.com/showthread.php?t=935312, but I don't have access as I am a new member. Currently, I'm stuck. I've run SuperOneClick, but it has stopped at "Waiting for Device." I know. I just started. What have I done wrong that it's already failing? I have downloaded all the up-to-date necessary files, but I can't do anything with them because I can't get anywhere. Does the program need to be on the SD card in the phone? WHAT AM I DOING WRONG?!?! The instructions seem so simple! /about_to_RAGE_QUIT
EDIT::
Apparently my phone didn't take the debugging mode the first time. I'm now stuck on step 5. When you guys are talking about "Navigating" to the folder adb exists in, do I use PATH? If I type in the entire address of the file all the way through adb.exe, I can't type in the next line. What am I doing wrong? /n00b
Make sure you have debugging turned on. Go to menu, settings, applications, development and check usb debugging. In the same screen check for the phone to stay awake. I hope this helps you.
Sent from my LG-P999 using xda premium
RebelPro said:
EDIT::
Apparently my phone didn't take the debugging mode the first time. I'm now stuck on step 5. When you guys are talking about "Navigating" to the folder adb exists in, do I use PATH? If I type in the entire address of the file all the way through adb.exe, I can't type in the next line. What am I doing wrong? /n00b
Click to expand...
Click to collapse
to navigate to the folder, open cmd, and type the following:
cd (directory of the location)
for example:
if i wanted to navigate to my downloads folder on my computer, i would type this:
cd C:\Documents and Settings\user\My Documents\Downloads
So i have been trying to root my tprime for about a couple days now and i really need some help. Im trying to use Vipers tool (option 1), however every time i try to use it it just gets stuck on "daemon started successfully". Every now and then the script will flip out and tell me that it isnt connected, but that is pretty rare. I'm on 9.4.2.15, have debugging checked, no lockscreen (saw it helps somewhere), device manager recognizes it as "asus transformer prime ADB interface". I have tried 2 different scripts and restarted both my tablet and computer (windows 7 x64) several times. I am at a total loss about what to do next. Any help would be great =).
Also i have deleted splashtop from my computer and made sure that and asussync are not running on my tablet
lotsofllamas said:
So i have been trying to root my tprime for about a couple days now and i really need some help. Im trying to use Vipers tool (option 1), however every time i try to use it it just gets stuck on "daemon started successfully". Every now and then the script will flip out and tell me that it isnt connected, but that is pretty rare. I'm on 9.4.2.15, have debugging checked, no lockscreen (saw it helps somewhere), device manager recognizes it as "asus transformer prime ADB interface". I have tried 2 different scripts and restarted both my tablet and computer (windows 7 x64) several times. I am at a total loss about what to do next. Any help would be great =).
Also i have deleted splashtop from my computer and made sure that and asussync are not running on my tablet
Click to expand...
Click to collapse
Update your ADB drivers in device manager with the following
http://forum.xda-developers.com/showthread.php?t=1426502
Make sure USB Debugging is enabled within your TFP's settings (Developer options)
If that does not work then you have done something wrong.
Have a nice day
that didnt work >< but i have no idea where i couldve done something wrong...especially since i have had to re-do most steps anyway
lotsofllamas said:
that didnt work >< but i have no idea where i couldve done something wrong...especially since i have had to re-do most steps anyway
Click to expand...
Click to collapse
Well if you really want this, I would suggest the following:
We want to verify that your devices is correctly connect with ADB,(assuming you dont have adb set up) so lets set up Android SDK (which is good to do anyway).
http://developer.android.com/sdk/index.html
Download the .exe. Run it. It should create a folder in a location of your choosing, named something like "android-sdk". Browse to that folder, then to the 'tools' sub folder and run the SDK manager, install packages.
Next open the Command Prompt.
For example sake, lets say the location of your AndroidSDK is in the path
Code:
C://users/mike/android-sdk-win/
(Not sure what the sdk folder is actually called)
In the command prompt, enter
Code:
cd /users/mike/android-sdk-win/tools
(again replacing the location and name with the correct ones)
This will change the cmd location to the tools folder.
Then enter
Code:
adb devices
It will then list a device if one exists, if not then your adb drivers are probably not installed correctly.
If you need me to clear anything up, let me know
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
lotsofllamas said:
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
Click to expand...
Click to collapse
Hmm, I am really not sure. Sounds like you have done everything right.
adb devices is showing no devices which means viperMOD will not work.
When you plug the prime into your computer, on your prime,go to the notification bar and hit on the usb notification (not pc sync, the usb one), and when the settings menu opens up, which box is checked? MTP or PTP? if ones not working, try the other
if all else fails,
try it on another computer maybe?
lotsofllamas said:
you were right i wasnt connected, im not quite sure how im doing anything wrong
installed the drives said to
unzipped
went into device manager -update driver software -browse -lemme pick -have disk-android_winusb -ok -comes up as ADB interface -next -finishes installing
try to run viperMOD PrimeTime v4.5 (option 1)
stalls on daemon started successfully
i figure if i go into as much detail as possible maybe this can get solved =(
Click to expand...
Click to collapse
I rooted last night on latest version of primetime. I used a very old computer to do it. I had it stall on daemon started successfully at first also. I just unplugged the prime connection to PC and plugged it in again. then restarted the primetime program. worked for me. seems like everything you did is right. I guess sometimes the program acts funny. try to run and if it stalls just unplug connection to PC. close out app. then plug back up. open program and try again. it'll catch. I notice it'll stall if you keep trying to root after repeated ffailed attempts. close out the exe. then try again.
demandarin said:
I rooted last night on latest version of primetime. I used a very old computer to do it. I had it stall on daemon started successfully at first also. I just unplugged the prime connection to PC and plugged it in again. then restarted the primetime program. worked for me. seems like everything you did is right. I guess sometimes the program acts funny. try to run and if it stalls just unplug connection to PC. close out app. then plug back up. open program and try again. it'll catch. I notice it'll stall if you keep trying to root after repeated ffailed attempts. close out the exe. then try again.
Click to expand...
Click to collapse
It has nothing to do with the Prime time. As he has said, he got the android sdk setup and confirmed that "adb devices" shows no device, which lends itself to his device or drivers not being installed correctly.
Again, nothing to do with vipermod
everything to do with how he is connected (and i think he tried 'unplugging and replugging')
-------------------------------------
Lets Try this. The following may look intimidating but its very straight forward and after its done you will be more adept at adb and everything else (and hopefully be rooted)
1) Start=> Right Click "My Computer" => Properties => Advance System Settings => Advanced Tab=> Environmental Variables
---In the top box, there should be a "PATH" variable, if so hit edit and go to the end of whatever is there (make sure there is a ';' after whatever is there) and type the path to your android SDK tools folder (same folder you browsed to before in cmd)
My PATH Field looks like this
Code:
C:\Users\Mike\Downloads\android-sdk_r16-windows\android-sdk-windows\platform-tools\; C:\Program Files\Java\jre7\bin
(I also have java linked, this is okay if you do not)
If there is no PATH, just hit 'new'
The above allows you to, from command prompt, type "adb" from anywhere (ie, you dont have to be in the sdk folder which is nice)
EDIT: FLAW: the following app required root womp. I guess keep trying with the USB{
-Go to Device Manager, Uninstall Your TFP, before hitting refresh go to add new devices and select the drivers and what not.
-I will continue to try to think of an alternate method.
}
2)Download and Install this on your prime (NOTE THIS STEP REQUIRES BOTH PRIME AND PC TO BE ON SAME NETWORK)
-This method is ADB over wireless, so you dont need USB to be connected (infact just unplug it for this)
https://market.android.com/details?...251bGwsMSwyLDEsInNpaXIuZXMuYWRiV2lyZWxlc3MiXQ..
Open the app and enable it. Note the "IP: port"
type in your command prompt (again if you did step 1, you can do this from anywhere)
Code:
adb connect <yourip:port>
your ip and port should be listed in that app
=> after that, try
Code:
adb devices
It should be there! this allowed you to bypass usb issues. I dont think you can use vipermod, but there is a more manual method we can use
3) Memphroid Root
(information taken from link below)
http://forum.xda-developers.com/showthread.php?t=1461736
memphroid binary
su binary
save both those files somewhere.. for example sake, make it your desktop in a folder called 'memphroid'
Open command prompt and change to the folder memphroid on your desktop
Code:
cd Desktop/memphroid
(the above assumes command prompt defaults at c:\Users\<yourname>\. if not just type in "dir" to get a list of directories that you can cd to)
you are now in the memphroid folder
assuming you did step 2 correct, you should have already connected with "adb connect"
now enter the following in cmd
Code:
adb push mempodroid /data/local
adb push su /data/local
adb shell
One line at a time, the first 2 push the files to the correct locations, the third one puts you into the 'shell' (basically terminal) of your prime (you should see a # now before where you type)
Then enter
Code:
chmod 777 /data/local/mempodroid
/data/local/mempodroid 0xd9ec 0xaf47 sh
Copy all of that and just paste it at once (i think its both at once, not one line at a time)
then type
Code:
mount -o remount,rw -t ext4 /dev/block/mmcblk0p1 /system
And then here is the rest from that thread. I would just do all of the following except the first two lines starting with 'rm' because you havent rooted before
** IF you have previously rooted your Prime, run the following two commands. They may throw an error that the file a file was not found.
rm /system/bin/su
rm /system/xbin/su
cat /data/local/su > /system/xbin/su
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local/mempodroid
rm /data/local/su
exit
exit
adb reboot
After your Transformer Prime comes up, install Superuser from android market.
Click to expand...
Click to collapse
look to that thread linked for reference. if you neeed anything clarified or help, just post here. Please read my post carefully, following the step. I tried to be as clear as possible. I have never done the memphroid root before but it looks easy enough
Please hit 'Thanks' button, as I have taken the time to help
Still not able to get root...just tried Debugfs automated root tool and it stalled at "daemon started successfully" im seriously stumped here...
Ok, I'm just going to ask it...
How do I set up SDK and ADB on my 3rd generation HDX 8.9. I find quite a few sets of instructions from 2011 but nothing seems up to date. And android studio is installing the driver in amazon.com which seems weird.
This is the latest I tried--here
I've searched and searched--I've tried several of these with no luck getting the pc to recognize the kindle.
Please no hateful replies--I've been at this for 2 days and I or really wouldn't ask.
Links would be really useful.
Thank you
Unless you are developing, you do not need android studio, jdk, or anything else. All you need to to do is download the sdk.
From here I am going to assume you are on Windows. Probably win 8 or 8.1?
Extract the sdk to a folder where you have write access.
Now find the folder called platform-tools in the sdk folder.
Now, in the Windows explorer bar, select all the text and type cmd
If you do this right, it will open a command window in the platform- tools folder.
If that is confusing, you can go to the sdk folder and then open the command prompt from the start window. Then type cd and drag the platform-tools folder to the command window.
Right now, all the devs are crying, because these are lazy shortcuts, but they work and save you from adding this folder to your path which is better programmatically, but a bit more involved.
Anyway, now you are where you need to be so, type
Code:
adb devices
And you should see your device, but, you probably won't. Stay tuned...
Sent from my KFTHWI using Tapatalk
You don't need to install the whole Android Studio suite — just the SDK Tools will suffice.
As for the Kindle Fire drivers...
https://developer.amazon.com/appsan...ing-up-the-ADB-Driver-for-Kindle-Fire-Devices
So, hopefully you got either a printout of your device, or you got a blank line like...
Code:
List of devices attached...
This is because you do not have the driver installed. If you get another error, either you are in the wrong folder, or you did not enable and on your device.
Code:
To enable adb on your device, click on the serial number in settings>device options 5 times and it will give you the developer options. Enable adb is a toggle there.
Alright, now we need the driver. Go to device manager in your computer and delete anything that looks android or kindle in nature. Unhook your tablet and reboot.
Download the HDX toolkit from the developers error forum and try the install drivers tool in it.
Reboot.
Now, making sure you have enabled adb on your device, open up a command prompt in platform-tools, and try the command again.
Code:
Adb devices
You should see your serial number.
If you have any issues, report back. I may have skipped a step or two as I am giving these directions from memory.
Good luck.
~Leko
Whew! Thank you! Doing this now.
Will update
Did I say thank you?!!!!
Update...After extracting the sdk zip file, platform tools is not showing up.
Downloading the installer file now...
Update2...found platform tools
Oh, my bad, I'm on windows 7...
Update--
The kindle died..thanks for all the input! Greatly appreciated:good:
lekofraggle said:
So, hopefully you got either a printout of your device, or you got a blank line like...
Code:
List of devices attached...
This is because you do not have the driver installed. If you get another error, either you are in the wrong folder, or you did not enable and on your device.
Code:
To enable adb on your device, click on the serial number in settings>device options 5 times and it will give you the developer options. Enable adb is a toggle there.
Alright, now we need the driver. Go to device manager in your computer and delete anything that looks android or kindle in nature. Unhook your tablet and reboot.
Download the HDX toolkit from the developers error forum and try the install drivers tool in it.
Reboot.
Now, making sure you have enabled adb on your device, open up a command prompt in platform-tools, and try the command again.
Code:
Adb devices
You should see your serial number.
If you have any issues, report back. I may have skipped a step or two as I am giving these directions from memory.
Good luck.
~Leko
Click to expand...
Click to collapse
So I am stuck adb devices--the line is blank
--ADB is enabled
--USB debugging is checked
--kindle driver installed
--portable device deleted in device manager
--SDK is set up C:\Program Files (x86)\Android\android-sdk\platform-tools
The driver installed in a separate file in program files as amazon.com which looks odd to me.
Maybe my path is wrong?
Update I've tried the method found here but after 2 tries with reboots, I'm still getting MTP device and portable device->fire. Each time i see the last one I delete it, reboot plug in again and portable device appears.
I've also tried Amazon instructions here
Anyone have any ideas?
Thanks in advance!
It sounds like you are on the right track.
Unplug your kindle, delete the devices again, and try this file.
http://forum.xda-developers.com/showthread.php?t=2665683
Use it just to install the drivers. (That is all it can do for you).
Then open a command prompt.
And plug your device in.
.
If the drivers are installed correctly, the path only matters to get adb to work (which the blank line tells you it is).
Also, there is a chance the devices will show up the same after the correct drivers are used. Mtp is able to run aside adb, but on Win 8 anyway, not fastboot (don't worry about fastboot).