I didn't have this problem before but whenever I try to install either of the Bionix roms now, I get this error message:
"Copying files...
E: Can't mount /dev/block/mmcblkop2
(file exists)
E: Can't Mount DATA
E: Failure at line 373:
copy_dir PACKAGE:data DATA:
Installation Aborted
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please Open ROM Manager to report the issue."
Even odder (is that a word?) is the fact that even though it tells me it didn't install your rom, it still somehow boots into a corrupted version of your original bionix rom, i.e. the gps doesn't work and my quadrant score is mediocre at best. Any ideas? I still love your work, I just wanna find out what the heck is going on, lol.
Any help would be greatly appreciated.
-bobofosho123
p.s. The first time installed the original bionix rom, it didn't have ANY problems, go figure.
Why not ask in his thread opposed to randomly here where its not going to get his attention?
It says a file exists too.
I think i've figured it out actually, i just used ODIN to flash back to the leaked updated rom, and then I re-rooted my phone via my pc, and then simply flashed the Bionix 1.2 rom directly through clockwork mod. Thanks for the help though.
Related
I was messing around and disabled voodoo lagfix and wiped bat stats, when it was rebooting I heard the voice say something about re-partitioning and the phone dropped and when I but the battery back in it is stuck at loading screen. I tried to enable voodoo again but it wont work. Didn't find anything on my sd card and when I try to wipe and re-install a rom, I get
E:Can't chown/mod /system/
(operation not permitted)
E:Failure at line 74:
set_perm_recursive 0 0 0755 0644 SYSTEM:
Installation aborted
I can't get it to load. I have never had anything like this happen. Plz help
Something similar happened to me like this. I ended having to odin using eugene's no-brick froyo method.
First of all this is for DEVELOPMENT.
Your QUESTION should have been posted in Q&A or even in GENERAL.
Second, just use ODIN to flash the stock firmware, re-root, reflash Clockwork Recovery then flash your ROM or restore your previous backup.
Sorry... Thanks
I got it working... I had to mount the phone and find the voodoo file and delete it. Then I was able to restore everything back. A few hours of stress...lol Live and learn.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
I tried updating the Axura Rom on my phone from 2272 to 2290 and now I get this:
-- Installing: SDCARD:/Axura2290VE.zip
Finding update package...
Opening update package...
Installing update...
Formatting SYSTEM:...
Formatting CACHE:...
Formatting DATADATA:...
Formatting DATA:...
Deleting files...
Deleting files...
Deleting files...
Copying files...
Copying files...
Copying files...
Copying files...
E:Can't chown/mod /system/xbin
(No such file or directory)
E:Failure at line 78:
set_perm_recursive 0 2000 0755 0755 0755 SYSTEM:xbin
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockwor
kmod/recovery.log. Please open Rom Manager to re
port the issue.
It gets me into a recovery loop and then I have to Odin back to T-mobile stock
I've done 3 other Axura updates before with no problems, but now...
I later tried to recover back to Axura 2272, I did it's job without throwing any errors at me, but then it goes into a recovery loop.
I've been at this for hours trying to google a solution, or search on the forums and I couldn't find anything...
I'm kind of a noob at this flashing stuff, I've only been doing it for about a month and a half. After waiting for a froyo update, I decided T-mobile and Samsung could suck it, and I got my pretty little self on XDA.
Right now I can only get T-mobile Stock Android to work. I don't want to have to crawl back to that blasphemy! I either want my recovery to work or get onto Axura 2290, after that my phone will be working again. Please help!!
Weird, Can you try other roms?
permissions problem...like not having proper superuser/root ????
It could be a bad download. Atleast i dont see any reason for it to fail coming from fresh odin. Try downloading the file again. Odin>root>try newly downloaded file.
iynfynity said:
Weird, Can you try other roms?
Click to expand...
Click to collapse
I'm about to try Bionix
jmcghee1973 said:
permissions problem...like not having proper superuser/root ????
Click to expand...
Click to collapse
Well if you're asking whether or not I rooted, I used the Galaxy S One Click Root by TGA_Gunman, and I made sure to re root after every Odin. Would trying a different rooting method help at all?
Chip05 said:
I'm about to try Bionix
Well if you're asking whether or not I rooted, I used the Galaxy S One Click Root by TGA_Gunman, and I made sure to re root after every Odin. Would trying a different rooting method help at all?
Click to expand...
Click to collapse
I ve never used it....just sayin it looks as if its a root/permissions problem at this string ...set_perm_recursive 0 2000 0755 0755 0755 SYSTEM:xbin
Dunno ..if your going to ODIN back to stock JFD, I would go ahead and wipe davlik cache, etc while I was there and then reinstall root... might be some peices left behind causing a conflict with permissions to system/xbin
Alex9090 said:
It could be a bad download. Atleast i dont see any reason for it to fail coming from fresh odin. Try downloading the file again. Odin>root>try newly downloaded file.
Click to expand...
Click to collapse
I'm flashing 2272 right now, it appears to be working, and it didn't give me that error. So I guess you were right about it being a bad file. But how come my Clockwork recovery (It was an Axura 2272 recovery) wasn't working?
I have no idea to be honest other than bad download file messed up recovery. I am a noob myself.
I'm trying to install ginger clone r2 on my vibrant. I used ODIN to get back to 2.1 then installed rom manager and CWM. I constantly receive an error during installation of the ROM that reads:
formatting data...
copying files...
E:can't chown/mod /data/app
(operation not permitted)
E:failure at line 70
set_perm 1000 1000 0771 DATA:app
Installation aborted
this error happens with any custom ROM that i try to install.
Any help would be greatly appreciated.
I have to ask the most obvious, are you rooted man?
Did you check the MD5 (doubtful this was the cause)
it is rooted. i just tried the su command and it came back with #. how would i check MD5?
Eugene posted an update I think, see if it helps
You can check your MD5 with a program called hashtab, google it
yeah, hashtab is great:
http://beeblebrox.org/
I googled your error and someone said their issue was not being rooted, had to ask.
i finally got ginger clone to install. after i opened up the terminal and check i decided to give flashing ginger clone another shot and it worked. maybe it had to do with super user permissions or something because i changed those to allow the su command to work which i never did before. thanks for the help guys!
Hello everybody, It's so long since I've done this, I've probably made some fundamental error I know, forgive me.
I have changed to Samsung Galaxy II, but I am giving my old Hero to a family member, I had VillainRom 13 and I was trying to flash the Hero back to stock with 2.1-ruu-root-signed, I did a full wipe and then flashed 2.1, half way through the process I get an error:
Code:
Copying files
E:Can't symlink /system/xbin/flashcp
E:Failure at line 94:
symlink ./busybox SYSTEM:xbin/flashcp
Installation aborted.
Any guidance much appreciated
I should add that I am using RA-hero-v1.7.0.1
*Update* I have now re-installed VR13, seemingly OK, still confused about the failure of 2.1 though
Cheers
Paul
Hi,
You can create a gold card and change the rom.zip to heroimg.zip in the sdcard and then the 2.1 stock should install just fine in the hboot mode.
refer to this link:
_http_blog.up-link.ro/how-to-downgrade-your-htc-hero-rom-so-it-can-be-rooted-goldcard-method/
regards,
Kiran
i have re flashed my phone a while ago. it went well. from 2.3.5 to eclair 2.1. i reflashed due to wifi error, however, eclair installed, rooted the the phone, i plan to reflash it with a custom rom, Bionix 1.3.1 or Project V. im using the AIO toolbar, i tried it first with the Bionix, reinstalll packages 4 times. and i get an error. also with the Project V rom. same thing. error as well. the error says:
cannot locate /sdcard/update.zip
does this mean that my phone is not yet rooted? i have super user though.
Mostly likely you do not have the CWR Update.zip on your SDcard.
Go here and download Option B and put it on your SDcard. Reinstall twice and then flash your ROM
i already copy and pasted the file in /sdcard however it is still not working? shall i got into CWR? to make it work?
Put the CWR zip from my earlier post on your sdcard (not in a folder-just plain on card by itself). Might have to rename it Update.zip, but not sure about that one.
Boot into recovery (Blue) hit Reinstall Packages.
Will reboot back into recovery (Blue) and hit Reinstall packages again, will boot into CWR (Green).
From there, find Install zip from SD card and hit it. Now you can find you ROM and highlight it and install.