Hi guys. My phone is stuck on the tmobile stick together logo every time I try to start it up. This happened when I tried to change the artemis ROM. I've been searching for a solution for hours and none of them have worked. I have tried both a soft and a hard reset and have come up with nothing.
here is my phone info:
-tmous
-R 2.10.50.26
-G 15.39.50.070
-D 1.72.82124
any help is much appreciated
thanks again!
assuming you mean THIS rom
then you flashed a non compatible rom.
See the -D 1.72.82124?
That means the rom version is 1.72, tmous requires 2.x rom version or higher.
also, in the artemis rom thread... from post 1
NOTE 8 : This ROM has NO 576MB trick.
NOTE 9 : This ROM is NOT for US T-Mobile HD2 with 1024MB ROM.
Click to expand...
Click to collapse
"no 576 trick" means it wont work on tmous, "NOT for T-Mobile HD2" , , well, self explanatory.
Go into bootloader and flash a compatable rom, and next time READ ALL THE FIRST FEW POSTS of any rom you intend to flash.
(lucky for you it wasn't an official 1.72 rom, that would have included a radio that would have bricked your phone permanently,,,,,, live and learn )
thanks so much! im such a nub ; /
heh, welcome. I cant stress enough that you gotta, GOTTA, read all teh first posts of any rom you wanna flash, dont just look at teh screen grabs and go for it.
Better still, you are currently in the regular hd2 section, you dont have a regular hd2,, bookmark and go HERE, and only get your roms from there till you know what you are doing.
Related
hy
i have a WIZA-200 G4 adn for the past to days i have downloaded like all these versions of ROM from here and still each ROM utility says that i need to get a newer version?????????????
i just wanna download WM6 on my wizard is that too much to ask??
my spl 2.26.0001 and the RUU shows version 1.2.0.0 and somethign OS vERsion 2.26.10.2
kindly someone tell me where ic an download WM 6 to my phone
thanksss
my sys info says
ROM 2.26.10.2 WWE
rom date 6/7/06
radio 2.25.11
protocol 4.1.13.12
ext rom 2.26.10.105
mony114 said:
hy
i have a WIZA-200 G4 adn for the past to days i have downloaded like all these versions of ROM from here and still each ROM utility says that i need to get a newer version?????????????
i just wanna download WM6 on my wizard is that too much to ask??
my spl 2.26.0001 and the RUU shows version 1.2.0.0 and somethign OS vERsion 2.26.10.2
kindly someone tell me where ic an download WM 6 to my phone
thanksss
my sys info says
ROM 2.26.10.2 WWE
rom date 6/7/06
radio 2.25.11
protocol 4.1.13.12
ext rom 2.26.10.105
Click to expand...
Click to collapse
Ok here I come to save the day... The reason you are getting that error message is because you have a locked G4. From what you have said already, It sounds like you have T-Mobile and unfortunately, due to DOC right protection on all of our devices, you need to perform some kind of unlock on your device or work around it. I believe that G4 CID unlocking has been almost perfected but I can tell you 2 other ways to flash your device.
On the grander scale, here are all 3 known ways to flash your G4 device.
First and formost, shelltools is a very common and most heavily used way to flash a G4 device. It extracts the OS from the Rom and then flashes it to your device and afterwards, you need to hard reset your device and what do you know, you have WM6.
The second way to flash a Rom to a G4 device is to use SoftSPL. SoftSPL temporarily patches the CID on your device to think it is CID unlocked and allows you to flash a new Rom to the device as if it were in fact permanently unlocked but this is only a one time go. Each time you want to change Roms, you have to flash back to your carriers official Rom and then run SoftSPL again with the new Rom of your choice.
Third and finally, I mentioned above that they have managed to permanently CID unlock G4 devices but I am not sure if they managed to perfect it yet. I also have not tried this method before because I had to have a handset exchange and ended up with a G3.
Don't take this personally, but you really need to do alot of reading before you dive into the world of Rom flashers because from the sounds of what you wrote above, you don't know enough about flashing Roms yet and that makes it really hard. Trust me, I was in your shoes before.
Just hang out in the G4 forum for a while and read as much as you can and when you feel comfortable with what you are about to do, then give it a try. I really don't want to see you screw up your phone and brick it, but I do want to see you succeed in the Rom flashing world so for your own sake, read up. Here are just a few threads that you really should check out before trying to so something you're not sure about.
[solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED]
Solutuion found: how to flash any rom to CIDLOCKED DEVICE
Hard-SPL - or how to CID unlock your device
[Solution] G4 Hard SPL (CID unlock)
I really hope this was helpful. It should be all you need.
Dan.
hey thanxxxx i got it working used the mun tutorial on doing it had my fingers crossed all the way it took mine around 40 minutes and stil it woulndt say that its done so like after 45 minutes i just yanked the cable from my wizard and it at once said DONe hehe loving my new wm6 using 1437 tnt and its faster than my wm5 strangely i was expecting it to be a little slow hehe
thanx for your help dude really appreciate it
mony114 said:
hey thanxxxx i got it working used the mun tutorial on doing it had my fingers crossed all the way it took mine around 40 minutes and stil it woulndt say that its done so like after 45 minutes i just yanked the cable from my wizard and it at once said DONe hehe loving my new wm6 using 1437 tnt and its faster than my wm5 strangely i was expecting it to be a little slow hehe
thanx for your help dude really appreciate it
Click to expand...
Click to collapse
No problem... It was my pleasure. You should give 1921 a try. It's its rights newest version and is supposed to be much better. I read the whole thread and one major fix is battery life. A must for a Wizard user.
Dan.
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
loginvicky said:
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
Click to expand...
Click to collapse
do you have spl 1.2 or 3.5 and can you get to Bootloader screen ( that tri color screen)
spl 1.2 and to get to the tri colour screen wat sud i do ???????????
plz help irius wat next ????????????
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
to get to bootloader press camera + reset and make sure you don't have mini sd card in
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
Hi
Don't Panic. Press cameraButton+ Reset by stylus for few seconds then you get the tri colour screen.
Then you you update again with Radio 1.5.7.000. You will be ok if you have spl 1.20
Good Luck
God bless you both, thank god the tri colour screen did appear but when i tried the radio rom 1.57 flashing again, it goes till 7 percent then again shows error of rom image file corrupt please check kinda stuff, this is the same error which i got umpteen times after which the athena got stuff in the htc logo mode ........... still its there and yes that tri colour screen does come up.... plz help what to do next........ i dont want want to upgrade my radio now ...its ok even if i am able to boot in to my old good 6.0 os...., also the bootloader is 1.0 version not 1.2 .........plz guys help i really would pray to god to bless ur souls........ u are doing a fine job thanks.....
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
just lemme know if any ruu i could use in the bootloader mode that should bring to life my now almost bricked dopod............plz smbdy helpppp
loginvicky said:
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
Click to expand...
Click to collapse
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
sabes143 said:
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
Click to expand...
Click to collapse
After the above you'll be in spl1.2. You can only flash spl 1.2 based Rom. Do not use any SPL3.5 ROM
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
loginvicky said:
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
Click to expand...
Click to collapse
Are you sure you want to get there? It is a one way street. You can't come back once you get there. This means you would have less choice in ROM. You can't run your original ROM anymore. If you need to send it in for warranty, you may have problem as you would have clearly shown that you have voided the warranty condition (depending on how alert the service guy is, you may or may not be caught, but just because many manage to get away does not mean that everyone would get away) You must have got the wrong impression that it is better. It is not the case. Many who are there are waiting to come back, but can't for now.
Everything you get in spl3.5 ROM you can get in spl1.2 ROM, except with spl1.2 ROM you have more memory for yourself.
Think carefully, and think again, and again, before you get there.
Hi, i have to send my device to o2 Germany Service. Can please somebody tell me what Radio, Protocol and ROM Versions are shown on the startscreen by the original device?
Thx.
p.s. tried to use search, but found nothing...
p.p.s. really need help...
On mine it used to be this radio: 1.58.21.23
I am not sure about the system, but there is a thread for original Roms around here with a german o2 dump ( http://forum.xda-developers.com/showthread.php?t=368284 ). That should be fine. Don't forget to get rid of the SPL too...
mblaster
sure, i've flashed original ROM and SPL, but this is what i've got on a bootscreen.
I dont think, it's ok...
You still seem to have radio version 1.71.09.01. Your phone should not work properly with that one (ok, obviously it doesn't anyway, but the service could notice that). This stock rom needs radio version < 1.65.x.y. So you need to do SPL again to flash the older radio.
Unfortunately I dont know the exact output on the bootscreen for a xda star that has never been flashed, but there may be variations in any case. I dont think the service will notice something if you have the right radio version, a stock rom and no "security unlocked" message in the bootscreen, perhaps someone can confirm this?
mblaster said:
You still seem to have radio version 1.71.09.01. Your phone should not work properly with that one (ok, obviously it doesn't anyway, but the service could notice that). This stock rom needs radio version < 1.65.x.y. So you need to do SPL again to flash the older radio.
Unfortunately I dont know the exact output on the bootscreen for a xda star that has never been flashed, but there may be variations in any case. I dont think the service will notice something if you have the right radio version, a stock rom and no "security unlocked" message in the bootscreen, perhaps someone can confirm this?
Click to expand...
Click to collapse
Thx, i'll try to flash older radio today, but what about "1iki"? Should it be there?
Ok, now i flashed it again. This is what i've got
P.S. Spl is 1.16.0000
Is it ok now? )
Hey guys,
thank you very much for the hint about the original German Windows Mobile 6.0 HTC Nike ROM.
I checked that one and it's working fine with HardSPL.
Nevertheless I wasn't satisfied yet so I was looking for an updated ROM and I was successful.
I found an original Windows Mobile 6.1 German ROM and that one is working fine as well.
Due to the fact I hate Rapidshare I have also uploaded the ROM to MegaUpload.
Here they are:
http://rapidshare.com/files/1530151...407.1_Radio_NikeMR_1.65.28.25_signed_Ship.exe
http://www.megaupload.com/?d=D9YXW8OX
Enjoy
First off I want to apologize if what I am asking for exists but I have failed to find it.
It needs to be said that i've updated my HD2 with the latest complete update from HTC. I've been trying to get my hspl on by trying to install it but it says that because I have 3.03 it won't work. I need the radio for android since im quite sick of my buggy WM.
My question is: is there a way to install hspl even though you have 3.03? And could somebody point me in the right direction.
Any help is greatly appreciated.
No sir HSPL isn't compatible with SPL 3.03.
But way do you need it? I mean you mention fore change your radio version fore being compatible with Android. But firs of all Android is compatible with Radio 2.15.50.14 (the one who is integrated in stock ROM 3.14.
And secondly stock ROM 3.14 is compatible with Android sir.
Well it seems I was mistaken thanks for the help. Used a different build and the internet worked. But for some reason all my android builds get to the startup screen where I configure the first settings and such and survives through it by like 2 minutes then it gets cancer and dies. And by that I mean it hangs on random things and when I restart android it just goes to a black screen. Guess some people were just not meant to have android on their phones
Your stock ROM is fully compatible with Android. Do not touch anything. Just put on your SD card the Android files and run it. Like me. I've never flashed my HD2 with HSPL - I'm running only original ROMs and with the last one I am having smooth runnig Android OS too. Good luck!
Kurdinamnam said:
First off I want to apologize if what I am asking for exists but I have failed to find it.
It needs to be said that i've updated my HD2 with the latest complete update from HTC. I've been trying to get my hspl on by trying to install it but it says that because I have 3.03 it won't work. I need the radio for android since im quite sick of my buggy WM.
My question is: is there a way to install hspl even though you have 3.03? And could somebody point me in the right direction.
Any help is greatly appreciated.
Click to expand...
Click to collapse
I have the 3.14 ROM with 3.03.000 SPL installed on my HD2
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
I read through a lot of Forums indicating that this can only be done if you flash an older ROM to phone, hence overwriting the 3.03 SPL.
Tried downloading one of the older stock roms (1.66 and 1.48) and then attemped to flash via SD and through the .exe file directly.
Heres what happened:
----------------------
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
At first I thought it could be an incorrect ROM but I doublechecked it.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with various types of Mem cards but no luck.
I then tried SSPL with 1.66 and 1.48 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08? Not sure if this will actually help.
Not sure what exactly i`m doing wrong here.
xcsi said:
Not sure what exactly i`m doing wrong here.
Click to expand...
Click to collapse
simple, you're using the wrong rom. It isnt just any stock rom, its a stock rom that is correct for your phone you need. so for example if its locked to orange france, you would need the orange FRA rom, if the phone came from o2 uk its the WWE O2 UK rom you need.
dont be confused by a phone that has been sim unlocked, it would still be rom locked.
Hi.
Just did this yesterday.
All you have to do is check the version installed.
Mine was 3.14.479.2 which is Eastern Europe.
So i downloaded the 1.66.479.2 and flashed.this flashed the 1.48 spl..
So problem solved.
forgot to mention the 3.14 it the rom version.the rest is region specific : in my case 479.2 means eastern europe.This is important.
Fox example i tried to flash WWE:1.66.405.2 (France Bouygues) but no luck. 0% and then error.
same problem - may be we need HSPL for SPL 3.03.0000
I experienced the same problem. may be we need HSPL for 3.03, or it is already available - i dont know....
Can anybody reply / answer / help us all who are having 3.03 and want to run NAND Android on their device ? ? ?
Thanks in anticipation.
Device Details :-
HTC HD2
OS 5.2.21913 (21913.5.0.94)
ROM 3.14.720.3 (04666) WWE
Radio 2.15.50.14
hello!
same problem for me
i search
when i found i come here for you tell
ankorez said:
hello!
same problem for me
i search
when i found i come here for you tell
Click to expand...
Click to collapse
Problem can easily be solved by installing the correct previous stock rom.
For example if you have now the 3.14.405.x stock rom you need to use previous version 1.66.405.x Red numbers need to be the same.
You can download the stock rom's on the HTC webpage, ore take a look here: http://forum.xda-developers.com/showthread.php?t=623283
thx i try it and i tell it
hi Guys, this is exactly what im trying to do, however ive come up against a big problem, im hopeing someone can help!!
My HD2 is a Orange one, currently on ROM 3.14.61.2 (04666) WWE, and im trying to downgrade it...
however i cant for the life of me find a rom that will work on this phone, i need something like 1.66.61.2
is there an obvious way around this??
just for reference im trying to install WP7 on it...
Try HSPL4
Hi uxu, i did yes but it doesnt seem to have made any difference!
darkcat_systems said:
Hi uxu, i did yes but it doesnt seem to have made any difference!
Click to expand...
Click to collapse
So downgrading to HSPL 2.08 didn't work ?
Ahh, dont worry i have got it working now!!
look like i had an iffy usb cable which was stopping HSPL4 from connecting correctly.
All sorted and WP7 now running, though after all that i dont think i like it!!!